The server provides two ways to back up and restore your server: using your local desktop or a tape drive.
The first method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately [_1]. The backup file will be somewhat less than this, depending on how compressible the data are. The \"Verify desktop backup file\" option can be used to check the integrity of a desktop backup file.
The tape backup method uses a software package called [_2] to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains [_3] of data.
Both restore methods allow you to restore your configuration and user data files. Ideally, the restore should be performed on a freshly installed server.
', 'bac_BACKUP_DESC_DAR' => 'Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.
Tape Backup. This method uses a software package called [_1] to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains [_2] of data.
Workstation backup. This method uses a software package called dar to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately [_3] uncompressed. Twice the compressed data size must be available on the backup share.
Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately [_3]. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.
All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. Ideally, full restore should be performed on a freshly installed server.
', 'bac_BACKUP_DESKTOP_TOO_BIG' => 'Your server has too much data for a reliable backup to desktop.', 'bac_BACKUP_FILE_INCOMPLETE' => 'The backup file was incomplete', 'bac_BACKUP_TITLE' => 'Backup or restore server data', 'bac_BACKUPS_RUN_AT' => 'Regular tape backups will run at: ', 'bac_BETWEEN_0_AND_12' => 'Please choose an hour between 0 and 12.', 'bac_BETWEEN_0_AND_59' => 'Please choose a minute between 0 and 59.', 'bac_CHECK_INTEGRITY_WARNING' => 'Warning : For large backups, checking integrity may be a long task and should be made with daily workstation backup disabled.', 'bac_CHECK_TO_VERIFY_FULL_RESTORE' => 'Check here to test integrity of all backups needed for a full restore with the selected backup ', 'bac_cifs' => 'cifs', 'bac_COMPRESSION_LEVEL' => 'Backup compression level ~[0-9~]', 'bac_CONFIGURATION_TO_BE_DONE' => 'Please configure the backup settings.', 'bac_CONFIGURE_TAPE_BACKUP' => 'Configure tape backup', 'bac_CONFIGURE_WORKSTN_BACKUP' => 'Configure Workstation Backup', 'bac_CONFIGURE_WORKSTN_BACKUP_DESC' => 'You can set the number of successive backup sets to keep on the workstation, with automatic rotation. Each set may contain saved data for several consecutive days. In this case first backup of the set is full backup, others daily backups are incremental. You can also set a time limit for each backup session or for incremental backups only. When this limit occurs, backup is cleanly stopped and the next incremental backup will safely continue with unsaved and modified datas.', 'bac_COULD_NOT_DECODE' => 'Could not decode backup file: ', 'bac_COULD_NOT_EXEC_PIPELINE' => 'Could not execute backup pipeline: ', 'bac_COULD_NOT_FORK' => 'Could not fork: ', 'bac_DESKTOP_BACKUP' => 'Backup to desktop', 'bac_DESKTOP_RESTORE' => 'Restore from desktop', 'bac_DESKTOP_RESTORE_DESC' => 'This process will upload a server backup file from your local desktop to your server and restore the configuration and user data files. The restore should be performed on a freshly installed server.', 'bac_DESKTOP_VERIFY' => 'Verify desktop backup file', 'bac_DOW' => 'Sunday Monday Tuesday Wednesday Thursday Friday Saturday Everyday', 'bac_ENABLE_DISABLE_TAPE' => 'Enable/Disable Nightly Tape Backup', 'bac_ENABLE_DISABLE_WORKSTN' => 'Enable/Disable Daily Workstation Backup', 'bac_ENABLE_TAPE_BACKUP' => 'Enable tape backup', 'bac_ENABLE_WORKSTN_BACKUP' => 'Enable Workstation Backup', 'bac_ERR_ALREADY_MOUNTED' => 'Backup directory is already mounted', 'bac_ERR_CONF_BACKUP' => 'Error occurred during conf-backup event.', 'bac_ERR_DAR_CATALOG' => 'Error when using Dar catalog', 'bac_ERR_EXTRACT' => 'Error when extracting with Dar', 'bac_ERR_INVALID_COMPRESSION' => 'Compression level must be set between 0 (no compression) and 9 (maximum compression)', 'bac_ERR_INVALID_FILES_IN_SET_NUMBER' => 'This number must be 1 or greater. First backup in set is full others are incrementals', 'bac_ERR_INVALID_FOLDER' => 'Invalid share name', 'bac_ERR_INVALID_HOUR' => 'Error: invalid backup hour: ', 'bac_ERR_INVALID_LOGIN' => 'Invalid Login', 'bac_ERR_INVALID_MINUTE' => 'Error: invalid backup minute: ', 'bac_ERR_INVALID_PASSWORD' => 'Invalid Password', 'bac_ERR_INVALID_REMINDER_HOUR' => 'Error: invalid reminder hour: ', 'bac_ERR_INVALID_REMINDER_MINUTE' => 'Error: invalid reminder minute: ', 'bac_ERR_INVALID_SELDATE' => 'Date format is invalid, must be ~[~[~[yyyy/~]mm/~]dd-~]hh:mm~[:ss~]. ie: 2005/12/31-08:23:32 or 10-08:32 or 08:32', 'bac_ERR_INVALID_SETS_NUMBER' => 'Sets number must be 1 or greater', 'bac_ERR_INVALID_TIMEOUT' => 'Maximum backup time must be set between 1 and 24 hours', 'bac_ERR_INVALID_WORKSTN' => 'Invalid Workstation IP or Hostname ', 'bac_ERR_MOUNTING_SMBSHARE' => 'Unable to mount workstation shared folder', 'bac_ERR_NO_FULL_BACKUP' => 'Aborting restore because needed full backup is missing or unreadable.', 'bac_ERR_NO_HOST_DIR' => 'No directory for your host in shared folder. Maybe your host name is different from backup ones', 'bac_ERR_NO_INC_BACKUP' => 'Aborting restore because the set has missing or unreadable incremental backup number', 'bac_ERR_NO_MOUNTED_DISK' => 'Error : No mounted disk available. Please mount a disk or select another type of workstation backup.', 'bac_ERR_NO_USB_DISK' => 'Error : No removable disk available. Please connect a removable disk or select another type of workstation backup.', 'bac_ERR_NOT_MOUNTED' => 'Backup directory is not mounted', 'bac_ERR_POST_BACKUP' => 'Error occurred during post-backup actions.', 'bac_ERR_PRE_BACKUP' => 'Error occurred during pre-backup actions.', 'bac_ERR_PRE_RESTORE' => 'Error occurred during pre-restore actions.', 'bac_ERR_READING_FILE' => 'There was an error in reading the backup file.', 'bac_ERR_RESTORING_FROM_TAPE' => 'Error occurred restoring files from tape.', 'bac_ERR_RESTORING_FROM_WORKSTN' => 'Error occurred restoring files from workstation.', 'bac_ERR_RESTORING_GID' => 'Error occurred while restoring gid of "www"', 'bac_ERR_RESTORING_INITIAL_GRP' => 'Error occurred while restoring initial group of "www".', 'bac_ERR_UPDATING_CONF_AFTER_TAPE_RESTORE' => 'Error occurred while updating system configuration after tape restore.', 'bac_ERR_UPDATING_CONF_AFTER_WORKSTN_RESTORE' => 'Error occurred while updating system configuration after workstation restore.', 'bac_ERR_WHILE_UNMOUNTING' => 'Error occurs when unmounting distant share', 'bac_ERROR_READING_FILE' => 'Error while reading files from', 'bac_ERROR_WHEN_TESTING_REMOTE_SERVER' => 'The parameters have been saved, however the remote host is not reachable, please check your settings.', 'bac_FILE_TO_RESTORE' => 'Backup file to restore from', 'bac_FILES_HAVE_BEEN_RESTORED' => 'The following files and directories have been restored:', 'bac_FILES_IN_BACKUP' => 'The following files are considered in the backup :', 'bac_FILTER_EXPRESSION' => 'Names filtered by', 'bac_FINISHED_AT' => 'and finished at: ', 'bac_FREE_SPACE' => 'You have approximately [_1] free space on the server. Check that desktop backup file is less than [_2] before commencing the restore.', 'bac_FULL_ONLY_ON' => 'Full backup is allowed on', 'bac_HOURS' => 'hours.', 'bac_INC_ONLY_TIMEOUT' => 'Don"t timeout full backup sessions', 'bac_LOAD_TAPE_REMINDER_TIME' => 'Load tape reminder time of day (hour/min)', 'bac_local removable disk' => 'Local removable disk', 'bac_LOGIN' => 'Login is ', 'bac_Mounted disk' => 'Mounted disk', 'bac_MUST_REBOOT_AFTER_RESTORE' => 'After the restore completes you must reboot the server.', 'bac_nfs' => 'nfs', 'bac_No suitable local devices found' => 'No suitable local devices found', 'bac_NO_BACKUPS_TO_RESTORE' => 'There is no backup set on configured workstation shared folder. Verify your configuration settings.', 'bac_NO_UID_FOR_NAME' => 'Could not get uid for user named: ', 'bac_NOW_RESTORING_FROM_TAPE' => 'Your server configuration and user data files are now being restored from tape.', 'bac_NOW_RESTORING_FROM_WORKSTN' => 'Your server configuration and user data files are now being restored from workstation shared folder.', 'bac_NUMBER_OF_FILES_IN_SET' => 'Daily backups in each set', 'bac_NUMBER_OF_SETS' => 'Number of rotating backup sets', 'bac_PAGE_REFRESH_IN' => 'This page will refresh to the status display in [_1] seconds, or click here.', 'bac_PASSWORD' => 'Password is ', 'bac_PM' => 'PM', 'bac_READ_COMPLETE' => 'You can choose all the directories and files you want to restore in the displayed list (use ctrl or shift for multiple selection).This process will restore the configuration and user data files from a server tape backup. The restore should be performed on a freshly installed server.
Ensure that you have loaded the desired backup tape into the tape drive before proceeding.
After the restore completes you must reboot the server.
', 'bac_RESTORE_CONF_FROM_WORKSTN' => 'Restore server configuration from workstation backup', 'bac_RESTORE_CONF_FROM_WORKSTN_DESC' => 'This process will restore the configuration and user data files from a Server workstation backup. The restore should be performed on a freshly installed Server.
Ensure that choose the right backup to restore below before proceeding.
After the restore completes you must reboot the server.
Backup will be restored from : ', 'bac_RESTORE_FAILED' => 'Restore failed! The backup file was incomplete.', 'bac_RESTORE_FAILED_MSG' => 'Restore failed! There was an error in reading the backup file.', 'bac_RESTORE_FROM_TAPE' => 'Restore From Tape', 'bac_RESTORE_FROM_WORKSTN' => 'Restore From Workstation', 'bac_RESTORE_IN_PROGRESS' => 'Restore in progress', 'bac_RESTORE_IN_PROGRESS_BEGAN_AT' => 'A system restore is in progress. It began at: ', 'bac_RESTORE_IN_PROGRESS_DESC' => 'After the restore completes you must reboot the server. Your restore is complete when the words "Restore complete" appear at the bottom of your screen. ', 'bac_RESTORE_SERVER_CONFIG' => 'Restore server configuration', 'bac_RESTORE_VERIFY_FAILED' => 'Verify integrity failed', 'bac_RESTORING_FROM_TAPE' => 'Restoring From Tape', 'bac_RESTORING_FROM_WORKSTN' => 'Restoring From Workstation', 'bac_SELECT_AN_ACTION' => 'Select an action', 'bac_SELECT_BACKUP_FILE' => 'Select backup file', 'bac_SELECT_DATE_BEFORE' => 'Restore most recent before', 'bac_SELECT_FILES_TO_RESTORE' => 'Select files to restore', 'bac_SELECT_VFS_TYPE' => 'Select the type of share for backup destination', 'bac_SERVER_REBOOT' => 'Server reboot', 'bac_SERVER_WILL_REBOOT' => 'Your server will now reboot.', 'bac_SHARED_FOLDER_NAME' => 'Backup share', 'bac_STARTED_AT' => 'It began at: ', 'bac_SUCCESSFULLY_DISABLED' => 'Successfully disabled tape backups', 'bac_SUCCESSFULLY_DISABLED_WORKSTN' => 'Successfully disabled workstation backups', 'bac_SUCCESSFULLY_ENABLED_TAPE' => 'Successfully enabled tape backups', 'bac_SUCCESSFULLY_ENABLED_WORKSTN' => 'Successfully enabled workstation backups', 'bac_TAPE_BACKUP_TIME' => 'Tape backup time of day (hour/min)', 'bac_TAPE_BACKUPS' => 'Tape backups are ', 'bac_TAPE_CONFIG_DESC' => 'Select whether you wish to enable nightly backups. Then indicate the desired times for the backup and the load tape reminder.
The tape backup requires a supported tape drive. A warning message will be sent to the administrator at the designated reminder time if the tape drive is empty.
', 'bac_TAPE_CONFIGURE' => 'Configure tape backup', 'bac_TAPE_RESTORE' => 'Restore from tape', 'bac_TESTED_BACKUP' => 'Testing integrity of backup', 'bac_TESTING_NEEDED_BACKUPS_FOR_RESTORE' => 'Testing all backups needed for a full restore with selected backup', 'bac_UNABLE_TO_RESTORE_CONF' => 'Unable to restore server configuration', 'bac_UPDATING_TAPE_CONF' => 'Updating tape backup configuration', 'bac_UPDATING_WORKSTN_CONF' => 'Updating workstation backup configuration', 'bac_VERIFY_BACKUP_DESC' => 'This option will display the names of all files in a previously created desktop backup file. You can use this option to verify the contents of the backup file.
', 'bac_VERIFY_COMPLETE' => 'Verification is complete', 'bac_VERIFY_WORKSTN_BACKUP_DESC' => 'This option will display the names of all files in a previously created workstation daily backup. You can use this option to verify the contents of the backup.You must choose the backup you want to verify
Only files flagged with (Saved) are contained in the backup.
This panel displays the present workstation backup configuration. You can change it in this panel and the next one.
', 'bac_WORKSTN_BACKUP_ENABLED' => 'Backup is ', 'bac_WORKSTN_BACKUP_HOST' => 'Backup is made on LAN workstation ', 'bac_WORKSTN_BACKUP_INCONLY_TIMEOUT' => 'except full backups which are cleanly timed out after 24 hours', 'bac_WORKSTN_BACKUP_MNT' => 'Backup is made on mounted disk', 'bac_WORKSTN_BACKUP_NOT_CONFIGURED' => 'Presently, workstation backup is not configured. You can set this configuration with this panel and the next one.
', 'bac_WORKSTN_BACKUP_SETSNUM' => 'Number of rotating backup sets is ', 'bac_WORKSTN_BACKUP_SETTINGS' => 'Workstation Backup Settings', 'bac_WORKSTN_BACKUP_SHARE' => 'Destination backup share folder is ', 'bac_WORKSTN_BACKUP_TIME' => 'Workstation backup time of day (hour/min)', 'bac_WORKSTN_BACKUP_TIMEOUT' => 'Each daily backup session is cleanly timed out after ', 'bac_WORKSTN_BACKUP_TOD' => 'Daily backup occurs at ', 'bac_WORKSTN_BACKUP_USB' => 'Backup is made on local removable disk', 'bac_WORKSTN_BACKUP_VFSTYPE' => ' via ', 'bac_WORKSTN_BACKUPS' => 'Workstation backups are ', 'bac_WORKSTN_CONFIGURE' => 'Configure workstation backup', 'bac_WORKSTN_FULL_BACKUP_DAY' => 'Full backup session (new backup sets) is allowed only on', 'bac_WORKSTN_FULL_BACKUP_EVERYDAY' => 'Full backup sessions (new backup set) are allowed everyday', 'bac_WORKSTN_LOGIN' => 'Login name', 'bac_WORKSTN_NAME' => 'Workstation IP or hostname', 'bac_WORKSTN_NOT_SET' => 'You must first correctly configure your workstation backup', 'bac_WORKSTN_RESTORE' => 'Restore from workstation', 'bac_WORKSTN_SEL_REST_DESC' => 'This process will restore only specified files and directories. You must first choose the backup from which the files will be restored. If you don"t know in which backup are the required files, you can select "All backups" option.