- The server provides two ways to back up and restore -your server: using your local desktop or a tape drive.
-The first method creates a copy of your server configuration and user -data files, and downloads it to your local desktop via your web browser. -Currently your configuration and data files total approximately -[_1]. The backup file will be somewhat less than this, -depending on how compressible the data are. The \"Verify desktop backup -file\" option can be used to check the integrity of a desktop backup -file.
-The tape backup method uses a software package called [_2] -to back up your entire hard disk to tape every night. This requires a -supported tape drive and a tape that is not write-protected. The backup -is performed automatically at the selected time every night (with a -reminder automatically e-mailed to the administrator during the day). -Currently your hard disk contains [_3] of data.
-Both restore methods allow you to restore your configuration and user -data files. Ideally, the restore should be performed on a freshly -installed server.
', -'bac_BACKUP_DESC_DAR' => 'Three ways are provided to back up and restore your -server: using a tape drive, using a network share or a local -removable disk, or using your local desktop.
-Tape Backup. This method uses a software package called [_1] -to back up your entire hard disk to tape every night. This requires a -supported tape drive and a tape that is not write-protected. The backup -is performed automatically at the selected time every night (with a -reminder automatically e-mailed to the administrator during the day). -Currently your hard disk contains [_2] of data.
-Workstation backup. This method uses a software package called dar -to back up your server configuration and data files to a network share -or a local removable disk such as a USB disk. -You can manage how many rotating sets of backups are kept, -and how many incremental backups to have in each set. -The backup is performed automatically at the selected time every day. Currently -configuration and data files total approximately [_3] uncompressed. -Twice the compressed data size must be available on the backup share.
-Backup to Desktop. This method creates a copy of your server -configuration and user data files, and downloads it to your -local desktop via your web browser. -Currently your configuration and data files total approximately -[_3]. The backup file will be somewhat less than this, -depending on how much the data can be compressed. -This file can be used to restore the server from the console if you -copy it to a local removable disk such as a USB disk.
-All backup methods allow you to restore your configuration and user -data files. Workstation backup provides individual file restore. Ideally, -full restore should be performed on a freshly installed server.
', -'bac_BACKUP_CONFIG_STATUS' => 'Backup configuration and status', -'bac_BACKUPS_RUN_AT' => 'Regular tape backups will run at:', -'bac_REMINDER_MESSAGE_AT' => 'Reminder messages will be sent at:', -'bac_TAPE_BACKUPS' => 'Tape backups are', -'bac_DESKTOP_BACKUP' => 'Backup to desktop', -'bac_DESKTOP_RESTORE' => 'Restore from desktop', -'bac_DESKTOP_VERIFY' => 'Verify desktop backup file', -'bac_TAPE_CONFIGURE' => 'Configure tape backup', -'bac_TAPE_RESTORE' => 'Restore from tape', -'bac_RESTORE_IN_PROGRESS_BEGAN_AT' => 'A system restore is in progress. It began at:', -'bac_REFRESH_THIS_DISPLAY' => 'Refresh this display', -'bac_CONFIGURE_TAPE_BACKUP' => 'Configure tape backup', -'bac_RESTORE_COMPLETED' => 'A system restore has completed', -'bac_STARTED_AT' => 'It began at:', -'bac_FINISHED_AT' => 'and finished at:', -'bac_YOU_MUST_REBOOT' => 'You must reboot the server to activate any configuration changes that were -made as a result of this restore.', -'bac_REBOOT' => 'Reboot', -'bac_SELECT_AN_ACTION' => 'Select an action', -'bac_X_BACKUP_OR_RESTORE' => 'X Backup or restore server data', -'bac_ERR_PRE_BACKUP' => 'Error occurred during pre-backup actions.', -'bac_ERR_PRE_RESTORE' => 'Error occurred during pre-restore actions.', -'bac_ERR_POST_BACKUP' => 'Error occurred during post-backup actions.', -'bac_RESTORE_SERVER_CONFIG' => 'Restore server configuration', -'bac_DESKTOP_RESTORE_DESC' => 'This process will upload a server backup file from your local desktop to your server and restore the configuration and user data files. The restore should be performed on a freshly installed server.', -'bac_FREE_SPACE' => 'You have approximately [_1] free space on the server. -Check that desktop backup file is less than [_2] before -commencing the restore.', -'bac_MUST_REBOOT_AFTER_RESTORE' => 'After the restore completes you must reboot the server.', -'bac_FILE_TO_RESTORE' => 'Backup file to restore from', -'bac_VERIFY_BACKUP_DESC' => 'This option will display the names of all files -in a previously created desktop backup file. You -can use this option to verify the contents of the -backup file.
', -'bac_SELECT_BACKUP_FILE' => 'Select backup file', -'bac_VERIFY' => 'Verify', -'bac_RESTORE_CANNOT_PROCEED' => 'Unable to proceed with restore of server configuration', -'bac_ANOTHER_RESTORE_IN_PROGRESS' => 'Another restore is in progress. Please try again later.', -'bac_RESTORE_IN_PROGRESS' => 'Restore in progress', -'bac_RESTORE_IN_PROGRESS_DESC' => 'After the restore completes you must reboot the server. Your restore is -complete when the words "Restore complete" appear at the bottom of your screen.', -'bac_FILES_HAVE_BEEN_RESTORED' => 'The following files and directories have been restored:', -'bac_RESTORE_FAILED_MSG' => 'Restore failed! There was an error in reading the backup file.', -'bac_RESTORE_COMPLETE' => 'Restore complete', -'bac_ERR_RESTORING_GID' => 'Error occurred while restoring gid of \\'www\\'', -'bac_ERR_RESTORING_INITIAL_GRP' => 'Error occurred while restoring initial group of \\'www\\'.', -'bac_RESTORE_FAILED' => 'Restore failed! The backup file was incomplete.', -'bac_COULD_NOT_EXEC_PIPELINE' => 'Could not execute backup pipeline:', -'bac_COULD_NOT_DECODE' => 'Could not decode backup file:', -'bac_FILES_IN_BACKUP' => 'The following files are considered in the backup :', -'bac_VERIFY_COMPLETE' => 'Verification is complete', -'bac_BACKUP_FILE_INCOMPLETE' => 'The backup file was incomplete', -'bac_ERR_READING_FILE' => 'There was an error in reading the backup file.', -'bac_ENABLE_DISABLE_TAPE' => 'Enable/Disable Nightly Tape Backup', -'bac_TAPE_CONFIG_DESC' => 'Select whether you wish to enable nightly backups. Then indicate the -desired times for the backup and the load tape reminder.
The tape -backup requires a supported tape drive. A warning message will be sent to -the administrator at the designated reminder time if the tape drive is -empty.
', -'bac_ENABLE_TAPE_BACKUP' => 'Enable tape backup', -'bac_TAPE_BACKUP_TIME' => 'Tape backup time of day (hour/min)', -'bac_LOAD_TAPE_REMINDER_TIME' => 'Load tape reminder time of day (hour/min)', -'bac_AM/PM' => 'AM/PM', -'bac_AM' => 'AM', -'bac_PM' => 'PM', -'bac_UPDATE_CONF' => 'Update', -'bac_UPDATING_TAPE_CONF' => 'Updating tape backup configuration', -'bac_ERR_INVALID_HOUR' => 'Error: invalid backup hour:', -'bac_BETWEEN_0_AND_12' => 'Please choose an hour between 0 and 12.', -'bac_ERR_INVALID_MINUTE' => 'Error: invalid backup minute:', -'bac_BETWEEN_0_AND_59' => 'Please choose a minute between 0 and 59.', -'bac_ERR_INVALID_REMINDER_HOUR' => 'Error: invalid reminder hour:', -'bac_ERR_INVALID_REMINDER_MINUTE' => 'Error: invalid reminder minute:', -'bac_ERR_CONF_BACKUP' => 'Error occurred during conf-backup event.', -'bac_SUCCESSFULLY_ENABLED_TAPE' => 'Successfully enabled tape backups', -'bac_WITH_BACKUP_TIME' => 'with backup time:', -'bac_WITH_REMINDER_TIME' => 'and load tape reminder time:', -'bac_SUCCESSFULLY_DISABLED' => 'Successfully disabled tape backups', -'bac_RESTORE_CONF_FROM_TAPE' => 'Restore server configuration from tape backup', -'bac_RESTORE_CONF_FROM_TAPE_DESC' => 'This process will restore the configuration and user data files from a -server tape backup. The restore should be performed on a freshly installed server.
-Ensure that you have loaded the desired backup tape into the tape drive -before proceeding.
-After the restore completes you must reboot the server.
', -'bac_RESTORE_FROM_TAPE' => 'Restore From Tape', -'bac_UNABLE_TO_RESTORE_CONF' => 'Unable to restore server configuration', -'bac_RESTORING_FROM_TAPE' => 'Restoring From Tape', -'bac_NOW_RESTORING_FROM_TAPE' => 'Your server configuration and user data -files are now being restored from tape.', -'bac_ERR_RESTORING_FROM_TAPE' => 'Error occurred restoring files from tape.', -'bac_ERR_UPDATING_CONF_AFTER_TAPE_RESTORE' => 'Error occurred while updating system configuration after tape -restore.', -'bac_COULD_NOT_FORK' => 'Could not fork:', -'bac_SERVER_REBOOT' => 'Server reboot', -'bac_SERVER_WILL_REBOOT' => 'Your server will now reboot.', -'bac_NO_UID_FOR_NAME' => 'Could not get uid for user named:', -'bac_PAGE_REFRESH_IN' => 'This page will refresh to the status display in [_1] seconds, or -click here.', -'Backup or restore' => 'Backup or restore', -'bac_BACKUP_DESKTOP_TOO_BIG' => 'Your server has too much data for a reliable backup to desktop.', -'bac_WORKSTN_BACKUPS' => 'Workstation backups are', -'bac_WKBACKUPS_RUN_AT' => 'Regular workstation backups will run at:', -'bac_WORKSTN_CONFIGURE' => 'Configure workstation backup', -'bac_WORKSTN_VERIFY' => 'Verify workstation backup', -'bac_WORKSTN_RESTORE' => 'Restore from workstation', -'bac_CONFIGURE_WORKSTN_BACKUP' => 'Configure Workstation Backup', -'bac_ENABLE_DISABLE_WORKSTN' => 'Enable/Disable Daily Workstation Backup', -'bac_ENABLE_WORKSTN_BACKUP' => 'Enable Workstation Backup', -'bac_WORKSTN_BACKUP_TIME' => 'Workstation backup time of day (hour/min)', -'bac_UPDATING_WORKSTN_CONF' => 'Updating workstation backup configuration', -'bac_SUCCESSFULLY_ENABLED_WORKSTN' => 'Successfully enabled workstation backups', -'bac_SUCCESSFULLY_DISABLED_WORKSTN' => 'Successfully disabled workstation backups', -'bac_VERIFY_WORKSTN_BACKUP_FILE' => 'Verify workstation backup', -'bac_VERIFY_WORKSTN_BACKUP_DESC' => 'This option will display the names of all files -in a previously created workstation daily backup. You -can use this option to verify the contents of the -backup.You must choose the backup you want to verify
-Only files flagged with (Saved) are contained in the backup.
-This process will restore the configuration and user data files from a -Server workstation backup. The restore -should be performed on a freshly installed Server.
-Ensure that choose the right backup to restore below -before proceeding.
-After the restore completes you must reboot the server.
-Backup will be restored from :', -'bac_RESTORE_FROM_WORKSTN' => 'Restore From Workstation', -'bac_RESTORING_FROM_WORKSTN' => 'Restoring From Workstation', -'bac_NOW_RESTORING_FROM_WORKSTN' => 'Your server configuration and user data -files are now being restored from workstation shared folder.', -'bac_ERR_RESTORING_FROM_WORKSTN' => 'Error occurred restoring files from workstation.', -'bac_ERR_UPDATING_CONF_AFTER_WORKSTN_RESTORE' => 'Error occurred while updating system configuration after workstation -restore.', -'bac_WORKSTN_NAME' => 'Workstation IP or hostname', -'bac_WORKSTN_BACKUP_SETTINGS' => 'Workstation Backup Settings', -'bac_SHARED_FOLDER_NAME' => 'Backup share', -'bac_WORKSTN_LOGIN' => 'Login name', -'bac_WORKSTATION_BACKUP_DEST' => 'Backup workstation settings', -'bac_CONFIGURE_WORKSTN_BACKUP_DESC' => 'You can set the number of -successive backup sets to keep on the workstation, with automatic rotation. -Each set may contain saved data for several consecutive days. -In this case first backup of the set is full backup, others daily backups are -incremental. You can also set a time limit for each backup session or for incremental -backups only. When this limit occurs, backup is cleanly stopped and the next -incremental backup will safely continue with unsaved and modified datas.', -'bac_ERR_INVALID_WORKSTN' => 'Invalid Workstation IP or Hostname', -'bac_ERR_INVALID_FOLDER' => 'Invalid share name', -'bac_ERR_INVALID_LOGIN' => 'Invalid Login', -'bac_ERR_INVALID_PASSWORD' => 'Invalid Password', -'bac_ERR_ALREADY_MOUNTED' => 'Backup directory is already mounted', -'bac_ERR_MOUNTING_SMBSHARE' => 'Unable to mount workstation shared folder', -'bac_ERR_NOT_MOUNTED' => 'Backup directory is not mounted', -'bac_WORKSTN_NOT_SET' => 'You must first correctly configure your workstation backup', -'bac_NO_BACKUPS_TO_RESTORE' => 'There is no backup set on configured workstation shared folder. Verify your configuration settings.', -'bac_NUMBER_OF_SETS' => 'Number of rotating backup sets', -'bac_NUMBER_OF_FILES_IN_SET' => 'Daily backups in each set', -'bac_ERR_INVALID_SETS_NUMBER' => 'Sets number must be 1 or greater', -'bac_ERR_INVALID_FILES_IN_SET_NUMBER' => 'This number must be 1 or greater. First backup in set is full others are incrementals', -'bac_WORKSTN_TIMEOUT' => 'Optional backup session timeout (hours)', -'bac_INC_ONLY_TIMEOUT' => 'Don\\'t timeout full backup sessions', -'bac_ERR_INVALID_TIMEOUT' => 'Maximum backup time must be set between 1 and 24 hours', -'bac_ERR_NO_HOST_DIR' => 'No directory for your host in shared folder. Maybe your host name is different from backup ones', -'bac_ERROR_READING_FILE' => 'Error while reading files from', -'bac_WORKSTN_SEL_RESTORE' => 'Selective file restore from workstation', -'bac_WORKSTN_SELECTIVE_RESTORE' => 'Workstation selective file restore', -'bac_ALL_BACKUPS' => 'All backups', -'bac_WORKSTN_SEL_REST_DESC' => 'This process will restore only specified files and directories. You must first choose -the backup from which the files will be restored. If you don\\'t know in which backup -are the required files, you can select \\'All backups\\' option.This panel displays the present workstation backup configuration. You can -change it in this panel and the next one.
', -'bac_WORKSTN_BACKUP_NOT_CONFIGURED' => 'Presently, workstation backup is not configured. You can set this configuration -with this panel and the next one.
', -'bac_WORKSTN_BACKUP_ENABLED' => 'Backup is', -'bac_WORKSTN_BACKUP_USB' => 'Backup is made on local removable disk', -'bac_WORKSTN_BACKUP_MNT' => 'Backup is made on mounted disk', -'bac_WORKSTN_BACKUP_HOST' => 'Backup is made on LAN workstation', -'bac_WORKSTN_BACKUP_VFSTYPE' => 'via', -'bac_WORKSTN_BACKUP_SHARE' => 'Destination backup share folder is', -'bac_WORKSTN_BACKUP_TOD' => 'Daily backup occurs at', -'bac_LOGIN' => 'Login is', -'bac_PASSWORD' => 'Password is', -'bac_WORKSTN_BACKUP_SETSNUM' => 'Number of rotating backup sets is', -'bac_WORKSTN_BACKUP_DAYSINSET' => 'Number of daily backups contained in each set is', -'bac_WORKSTN_BACKUP_COMPRESSION' => 'Compression level (0-9) of backup is', -'bac_WORKSTN_BACKUP_TIMEOUT' => 'Each daily backup session is cleanly timed out after', -'bac_WORKSTN_BACKUP_INCONLY_TIMEOUT' => 'except full backups which are cleanly timed out after 24 hours', -'bac_WORKSTN_FULL_BACKUP_EVERYDAY' => 'Full backup sessions (new backup set) are allowed everyday', -'bac_WORKSTN_FULL_BACKUP_DAY' => 'Full backup session (new backup sets) is allowed only on', -'bac_WORKSTATION_BACKUP_SETCONF' => 'Create or modify workstation backup configuration', -'bac_SELECT_VFS_TYPE' => 'Select the type of share for backup destination', -'bac_ERR_NO_USB_DISK' => 'Error : No removable disk available. Please connect a removable disk or select another type of workstation backup.', -'bac_ERR_NO_MOUNTED_DISK' => 'Error : No mounted disk available. Please mount a disk or select another type of workstation backup.', -'bac_HOURS' => 'hours.', -'bac_ERR_NO_FULL_BACKUP' => 'Aborting restore because needed full backup is missing or unreadable.', -'bac_ERR_NO_INC_BACKUP' => 'Aborting restore because the set has missing or unreadable incremental backup number', -'bac_CHECK_TO_VERIFY_FULL_RESTORE' => 'Check here to test integrity of all backups needed for a full restore with the selected backup', -'bac_TESTING_NEEDED_BACKUPS_FOR_RESTORE' => 'Testing all backups needed for a full restore with selected backup', -'bac_TESTED_BACKUP' => 'Testing integrity of backup', -'bac_RESTORE_VERIFY_FAILED' => 'Verify integrity failed', -'bac_CHECK_INTEGRITY_WARNING' => 'Warning : For large backups, checking integrity may be a long task and should be made with daily workstation backup disabled.', -'bac_cifs' => 'cifs', -'bac_nfs' => 'nfs', -'bac_local removable disk' => 'Local removable disk', -'bac_Mounted disk' => 'Mounted disk', -'bac_ERROR_WHEN_TESTING_REMOTE_SERVER' => 'The parameters have been saved, however the remote host is not reachable, please check your settings.', -'bac_ERR_EXTRACT' => 'Error when extracting with Dar', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Bugreport/bugreport_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Bugreport/bugreport_en.lex deleted file mode 100644 index d4b480f..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Bugreport/bugreport_en.lex +++ /dev/null @@ -1,24 +0,0 @@ -'bugr_FORM_TITLE' => 'Report a Bug', -'bugr_DO_NOT_PANIC' => 'Don\\'t Panic!', -'bugr_SME_EXPERIENCE' => 'Unfortunately there is no software without bugs, and you probably came to this page because of an issue you are experiencing with your SME-server installation.', -'bugr_PLEASE_REPORT_HERE' => 'In order to help developers to diagnose and fix your issue, please download one of the following text templates, fill it out and paste it into your bug report at', -'bugr_USE_TEMPLATE' => 'Please refer to the following link on how to report efficiency a bug and use its template', -'bugr_FOLLOWING_REPORT_MIGHT_HELP' => 'It will also help if you provide some vital information on the configuration of your SME-server in your bug report. By clicking on the "Create configuration report" button below, you can create and download a text file containing this information. Please attach this file to your bug report as well.', -'bugr_REPORT_CONTENT' => 'The report will contain the following information', -'bugr_SME_VERSION' => 'Koozali SME Server version', -'bugr_SERVER_MODE' => 'Server mode', -'bugr_PREVIOUS_SERVER_MODE' => 'Previous server mode', -'bugr_KERNEL_AND_ARCH' => 'Current running kernel version and architecture', -'bugr_INSTALLED_RPMS' => 'A list of additional RPMs installed on your server', -'bugr_ALTERED_TEMPLATES' => 'A list of SME templates that have been altered on your server from a base install', -'bugr_ALTERED_EVENTS' => 'A list of SME events that have been altered on your server from a base install', -'bugr_YUM_REPOS' => 'A list of additional software repositories configured on your server', -'bugr_PRIVACY' => 'No privacy related data (ie. users, passwords, IP addresses) will be included in the report.', -'bugr_CREATE_REPORT' => 'Create configuration report', -'bugr_DONATING' => 'Have you considered donating?', -'bugr_AWARE_SME' => 'You are probaly aware that SME server is developed and supported by a collaborative community of volunteers from all over the world. While SME server is free to download and use, maintaining the infrastructure behind the project (eg. hosting the forums and wiki, providing repositories and build servers etc.) costs real money in the real world.', -'bugr_YOUR_HELP' => 'In very much the same way you need us to address your current issue, we need YOUR help to keep this project alive!', -'bugr_CONSIDER_DONATING' => 'Please consider donating to the project by clicking on the image link below:', -'bugr_THANK_YOU' => 'Thank you for your support!', -'bugr_Download this report' => 'Download this report !', -'Report a bug' => 'Report a bug', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Clamav/clamav_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Clamav/clamav_en.lex deleted file mode 100644 index 5542e00..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Clamav/clamav_en.lex +++ /dev/null @@ -1,12 +0,0 @@ -'clm_FORM_TITLE' => 'Antivirus settings', -'clm_LABEL_FILESYSTEM_SCAN_PERIOD' => 'Scan filesystem', -'clm_DESC_FILESYSTEM_SCAN_PERIOD' => 'You are about to remove the information bay [_1] ([_2]). -
All files belonging to this information bay will be deleted. -
Are you sure you wish to remove this information bay? -
', -'iba_ERROR_WHILE_CREATING_IBAY' => 'An error occurred while creating the i-bay.', -'iba_SUCCESSFULLY_CREATED_IBAY' => 'Successfully created i-bay.', -'iba_NO_IBAYS' => 'There are no i-bays currently configured.', -'iba_CANT_FIND_IBAY' => 'Can\\'t find account for [_1] (does it exist?)', -'iba_CANT_CREATE_IBAY' => 'Can\\'t create new account for [_1] (does it already exist?)', -'iba_ERROR_WHILE_MODIFYING_IBAY' => 'An error occurred while modifying the i-bay.', -'iba_SUCCESSFULLY_MODIFIED_IBAY' => 'Successfully modified i-bay.', -'iba_VIRTUAL_HOST_MESSAGE' => 'The following virtual domains were using this information -bay as their content and will be changed to the primary web -site (you can change them to something else afterward).', -'iba_SUCCESSFULLY_DELETED_IBAY' => 'Successfully deleted i-bay.', -'iba_ERROR_WHILE_DELETING_IBAY' => 'An error occurred while deleting the i-bay.', -'iba_PASSWORD_DESC' => 'You are about to change the password for the i-bay [_1].', -'iba_IBAY_PASSWD_VALIDATION_ERROR' => 'The password may contain only letters and numbers.', -'iba_IBAY_PASSWD_VERIFY_ERROR' => 'The passwords do not match.', -'iba_SUCCESSFULLY_RESET_PASSWORD' => 'Successfully reset password.', -'iba_ERROR_WHILE_RESETTING_PASSWORD' => 'Error while resetting password.', -'iba_VHOST_MESSAGE' => 'The following virtual domains were using this information bay -as their content and will be changed to the primary web site -(you can change them to something else afterward):
', -'Information bays' => 'Information bays', -'WGRG' => 'Write = group, Read = group', -'WGRE' => 'Write = group, Read = everyone', -'WARG' => 'Write = admin, Read = group', -'NONE' => 'No access', -'LOCAL_NETWORK_NO_PASSWORD' => 'Local network (no password required)', -'LOCAL_NETWORK_PASSWORD' => 'Local network (password required)', -'ENTIRE_INTERNET_NO_PASSWORD' => 'Entire Internet (no password required)', -'ENTIRE_INTERNET_PASSWORD' => 'Entire Internet (password required)', -'ENTIRE_INTERNET_PASSWORD_REMOTE' => 'Entire Internet (password required outside local network)', -'INVALID_IBAY_DESCRIPTION' => 'Error: unexpected or missing characters in i-bay description', -'iba_ACCT_NAME_HAS_INVALID_CHARS' => 'The i-bay name "[_1]" contains invalid characters. -I-bay names must start with a lower case letter and contain -only lower case letters, numbers, and hyphens.', -'iba_MAX_IBAY_NAME_LENGTH_ERROR' => 'The i-bay name "[_1]" is too long. The maximum is -[_2] characters.', -'iba_ACCT_CLASHES_WITH_PSEUDONYM' => 'The account "[_1]" clashes with pseudonym -details for [_2] account "[_3]". -[_1] is a pseudonym for [_2].
', -'iba_ACCOUNT_EXISTS' => 'The account "[_1]" is an existing [_2] account.', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Initial/initial_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Initial/initial_en.lex deleted file mode 100644 index d566a56..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Initial/initial_en.lex +++ /dev/null @@ -1,56 +0,0 @@ -'initial_FORM_TITLE' => 'Welcome to the server manager', -'initial_FRAMES_BODY' => '- Welcome to SME Server, the leading Linux distribution for - small and medium enterprises. SME Server is brought to - you by Koozali Foundation, Inc., - a non-profit corporation that exists to provide marketing and - legal support for SME Server. -
- -- SME Server is freely available under the GNU General Public - License and is only possible through the efforts of the SME - Server community. However, the availability and quality of SME - Server is dependent on meeting our expenses, such as hosting - costs, server hardware, etc. -
- - -- As such, we ask for a donation to offset costs and fund - further development. -
- -- a) If you are a school, a church, a non-profit organisation or an - individual using SME for private purposes, we would appreciate you to - contribute within your means toward the costs associated with hosting, - maintenance and development. -
- -- b) If you are a company or an integrator and you are deploying SME in - the course of your work to generate revenue, we expect you to make a - donation commensurate with the level of revenue you generate and the - number of servers your have in the field. Please, help the project -
- -
-
-
-
- This software comes with ABSOLUTELY NO WARRANTY. - Please click here - to view detailed support, warranty and licensing information. -
- -- To perform a system administration function, click one of the links in the menu on the left of your screen. -
', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Localnetworks/localnetworks_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Localnetworks/localnetworks_en.lex deleted file mode 100644 index 006738d..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Localnetworks/localnetworks_en.lex +++ /dev/null @@ -1,30 +0,0 @@ -'ln_LOCAL NETWORKS' => 'Local networks', -'Local networks' => 'Local networks', -'ln_FIRSTPAGE_DESC' => 'For security reasons, several services on your server are available only to your local network. However you can grant these local access privileges to additional networks by listing them below. Most installations should leave this list empty.', -'ln_ADD_TITLE' => 'Add a local network', -'ln_ADD_DESC' => 'Each parameter must be in the form #.#.#.# (each # is a number from 0 to 255). The server software will zero out the ending (host identifier) part of the network address according to the subnet mask, to ensure that the network address is valid."Router" should be the IP address of the router on your local network via which the additional network is reached.', -'ln_NETWORK_ADDRESS' => 'Network address', -'ln_SUBNET_MASK' => 'Subnet mask', -'ln_INVALID_IP_ADDRESS' => 'Invalid IP address - [_1]', -'ln_INVALID_SUBNET_MASK' => 'Invalid subnet mask', -'ln_REMOVE_TITLE' => 'Remove local network', -'ln_REMOVE_DESC' => 'You are about to remove the following local network.', -'ln_REMOVE_CONFIRM' => 'Are you sure you wish to remove this network?', -'ln_DEFAULT' => 'default', -'ln_NUMBER_OF_HOSTS' => 'Number of hosts', -'ln_NOT_ACCESSIBLE_FROM_LOCAL_NETWORK' => 'Error: router address {$networkRouter} is not accessible from local network. Did not add network.', -'ln_LOCALNETWORK_ADD' => 'Add network', -'ln_NETWORK_ALREADY_LOCAL' => 'Error: network {$network} (derived from network {$networkAddress} and subnet mask {$networkMask}) is already considered local. Did not add new network.', -'ln_NETWORK_ALREADY_ADDED' => 'Error: network {$network} (derived from network {$networkAddress} and subnet mask {$networkMask}) has already been added. Did not add new network.', -'ln_ERROR_CREATING_NETWORK' => 'Error occurred while creating network.', -'ln_SUCCESS' => 'Successfully added network [_1]/[_2] via router [_3].', -'ln_SUCCESS_SINGLE_ADDRESS' => 'Successfully added network {$network}/{$networkMask} via router {$networkRouter}. Your server will grant local access privileges to the single IP address {$network}.', -'ln_SUCCESS_NETWORK_RANGE' => 'Successfully added network [_1]/[_2] via router [_3]. Your server will grant local access privileges to [_4] IP addresses in the range [_5] to [_6].', -'ln_NO_SUCH_NETWORK' => 'Network not found in network db', -'ln_SUCCESS_REMOVED_NETWORK' => 'Successfully removed network [_1]/[_2] via router [_3].', -'ln_ERROR_DELETING_NETWORK' => 'Error occurred while deleting network.', -'ln_NO_ADDITIONAL_NETWORKS' => 'No additional networks', -'ln_REMOVE_HOSTS_DESC' => 'Local hosts configured on the network you are about to remove have been detected. By default, they will also be removed. Uncheck this box if, for some reason, you do not wish this to happen. Note that they will not be treated as local, and may not even be reachable, after this network is removed.', -'ln_REMOVE_HOSTS_LABEL' => 'Remove hosts on network', -'ln_extra' => '{$network}/{$networkMask} via router $networkRouter}.', -'ln_SUCCESS_NONSTANDARD_RANGE' => '
Successfully added network [_1]/[_2] via router [_3].
Your server will grant local access privileges to [_4] IP addresses in the range [_5] to [_6].
Warning: the ProFTPd FTP server cannot handle this nonstandard subnet mask. The simpler specification [_7] will be used instead.
', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Login/login_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Login/login_en.lex deleted file mode 100644 index 3774418..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Login/login_en.lex +++ /dev/null @@ -1,23 +0,0 @@ -'use_TITLE' => 'User login', -'use_SIGNIN' => 'Sign in', -'use_FORGOT' => 'Forgot password ?', -'use_RESET_REGISTERED' => 'A password reset message has been sent to the e-mail address of this account.- You can use this panel to modify your firewall rules so - as to open a specific port on this server and forward it - to another port on another host. Doing so will permit - incoming traffic to directly access a private host on - your LAN. -
- WARNING: Misuse of this feature can seriously compromise the - security of your network. Do not use this feature - lightly, or without fully understanding the implications - of your actions. -
', -'pf_CREATE_RULE' => 'Create portforwarding rule', -'pf_SUMMARY_ADD_DESC' => 'The following summarizes the port-forwarding rule - that you are about to add. If you are satisfied with the rule, - click the \\'Add\\' button.', -'pf_SUMMARY_REMOVE_DESC' => 'The following summarizes the port-forwarding rule - that you are about to remove. If you are sure you want to - remove the rule, click the \\'Remove\\' button.', -'pf_SHOW_FORWARDS' => 'Below you will find a table summarizing the current - port-forwarding rules installed on this server. Click on the - \\'Remove\\' link to remove the corresponding rule.', -'pf_NO_FORWARDS' => 'There are currently no forwarded ports on the system.', -'pf_CREATE_PAGE_DESCRIPTION' => 'Select the protocol, the port you wish to forward, the - destination host, and the port on the destination host - that you wish to forward to. If you wish to specify a port - range, enter the lower and upper boundaries separated by a - hyphen. The destination port may be left blank, which will - instruct the firewall to leave the source port - unaltered.
', -'pf_LABEL_SOURCE_PORT' => 'Source Port(s)', -'pf_LABEL_PROTOCOL' => 'Protocol', -'pf_LABEL_DESTINATION_PORT' => 'Destination Port(s)', -'pf_LABEL_DESTINATION_HOST' => 'Destination Host IP Address', -'pf_LABEL_RULE_COMMENT' => 'Rule Comment', -'pf_LABEL_ALLOW_HOSTS' => 'Allow Hosts', -'Port forwarding' => 'Port forwarding', -'pf_SUCCESS' => 'Your change to the port forwarding rules has been successfully saved.', -'pf_RULE_COMMENT' => 'Rule Comment', -'pf_ALLOW_HOSTS' => 'Allow Hosts', -'pf_ERR_NO_MASQ_RECORD' => 'Cannot retrieve masq record from the configuration database.', -'pf_ERR_UNSUPPORTED_MODE' => 'Unsupported mode.', -'pf_ERR_CANNOT_REMOVE_NORULE' => 'Cannot remove non-existant rule.', -'pf_ERR_NONZERO_RETURN_EVENT' => 'Event returned a non-zero return value.', -'pf_ERR_BADPORT' => 'The ports must be a positive integer less than 65536.', -'pf_ERR_BADIP' => 'This does not appear to be an IP address. You must use - dotted-quad notation, and each of the four numbers should be less - than 256. ie: 192.168.0.5', -'pf_ERR_DUPRULE' => 'This rule has already been added, it cannot be added twice.', -'pf_ERR_PORT_COLLISION' => 'ERROR: This port or port range conflicts with an existing - rule. Please modify this new rule, or remove the old rule.', -'pf_ERR_BADAHOST' => 'This does not appear to be a valid IP address list. - ie: 192.168.0.1,192.168.1.1/24', -'pf_IN_SERVERONLY' => 'This server is currently in serveronly mode and portforwarding - is possible only to localhost.', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Printers/printers_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Printers/printers_en.lex deleted file mode 100644 index 58eb8d0..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Printers/printers_en.lex +++ /dev/null @@ -1,51 +0,0 @@ -''prt_FORM_TITLE'' => 'Add or remove printers', -'prt_INITIAL_BTN' => 'Add printer', -'prt_INITIAL_DESC' => '', -'prt_NO_PRINTERS' => 'There are no printers in the system.', -'prt_CURRENT_LIST' => 'Current List of printers', -'prt_REMOTE_ADDRESS' => 'Remote address', -'prt_REMOTE_NAME' => 'Remote name', -'prt_CREATE_NEW_PRINTER' => 'Create a new printer', -'prt_CREATE_NEW_DESC' => 'Please choose a unique name for the printer and enter a brief -description. The printer name should contain only lower-case -letters and numbers, and should start with a lower-case -letter. For example "hplaser", "epsonlp", and -"canonbj" are valid choices, but "HP Laser Jet", -"Canon BubbleJet", and -"HP JetDirect Printer" are not. -Avoid names and descriptions that contain these terms, -"offline", "disabled", "down", "off", "waiting", "jam", -"paper", "error" and "responding".', -'prt_PRINTER_NAME' => 'Printer name', -'prt_LOCAL_PRINTER_0' => 'Local printer port 0 (LPT1)', -'prt_LOCAL_PRINTER_1' => 'Local printer port 1 (LPT2)', -'prt_LOCAL_PRINTER_2' => 'Local printer port 2 (LPT3)', -'prt_NET_PRINTER' => 'Network printer ...', -'prt_FIRST_USB_PRINTER' => 'First USB attached printer', -'prt_SECOND_USB_PRINTER' => 'Second USB attached printer', -'prt_ERR_UNEXPECTED_NAME' => 'Error: unexpected characters in printer name.
-The printer name should contain only lower-case -letters and numbers, and should start with a lower-case -letter. For example "hplaser", "epsonlp", and -"canonbj" are valid names.
', -'prt_ERR_UNEXPECTED_DESC' => 'Error: unexpected or missing characters in description. -Did not create new printer.', -'prt_ERR_EXISTS' => 'Error: An account with the same name exists with type:', -'prt_ERR_INVALID_ADDRESS' => 'Error: invalid network address. Did not create new printer.', -'prt_ERR_INVALID_REMOTE_NAME' => 'Error: invalid network printer name. Did not create new printer.', -'prt_ERR_CREATING' => 'Error occurred while creating printer.', -'prt_CREATED_SUCCESSFULLY' => 'Successfully created printer:', -'prt_CREATE_NETWORK_PRINTER' => 'Create a new network printer', -'prt_ERR_OPENING_DB' => 'Error occurred while opening accounts database.', -'prt_CREATE_NETWORK_DESC' => 'Please enter the address and name of the network printer', -'prt_HOSTNAME_OR_IP' => 'Hostname or IP address of the network printer', -'prt_REMOTE_NAME_DESC' => 'Network printer name (enter raw if not sure)', -'prt_REMOVE_PRINTER' => 'Remove printer', -'prt_ABOUT_TO_REMOVE' => 'You are about to remove the printer:', -'prt_SPOOL_FILE_WARNING' => 'All the spool files for this printer will be deleted.', -'prt_ARE_YOU_SURE' => 'Are you sure you wish to remove this printer?', -'prt_ERR_INTERNAL_FAILURE' => 'Error: internal failure while removing printer:', -'prt_ERR_DELETING' => 'Error occurred while deleting printer.', -'prt_DELETED_SUCCESSFULLY' => 'Successfully deleted printer:', -'prt_MUST_BE_VALID_HOSTNAME_OR_IP' => 'Must be a valid hostname or IP number', -'Printers' => 'Printers', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Proxy/proxy_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Proxy/proxy_en.lex deleted file mode 100644 index acddbfc..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Proxy/proxy_en.lex +++ /dev/null @@ -1,28 +0,0 @@ -''prx_TITLE'' => 'Proxy settings', -'prx_FIRST_PAGE_DESCRIPTION' => 'This page allows configuration of the server\\'s -proxy settings. -The server includes a transparent proxy and cache for -HTTP traffic. This is enabled by default, but not enforced -if the server is in "serveronly" mode. -If this server is acting as an e-mail server, connections -from local network clients to external SMTP servers -will default to being redirected to the local e-mail server.', -'prx_HTTP_PROXY_STATUS_DESCRIPTION' => 'The server\\'s HTTP proxy works to reduce overall uplink usage by -caching recently-visited pages. It is transparent to web browsers -using this server as their gateway. Enable or disable this proxy -with the following toggle.', -'prx_HTTP_PROXY_STATUS_LABEL' => 'HTTP proxy status', -'prx_SMTP_PROXY_STATUS_DESCRIPTION' => 'The server\\'s transparent SMTP proxy works to reduce virus traffic -from infected client hosts by forcing all outgoing SMTP traffic -through this server if set to "enabled". -If you wish to use an alternate SMTP server, and this server is -your gateway to it, set this proxy to "disabled". Setting the -proxy to "blocked" prevents all SMTP traffic to other servers, -this is the default. The proxy only intercepts/blocks normal smtp -(port 25) traffic.', -'prx_SMTP_PROXY_STATUS_LABEL' => 'SMTP proxy status', -'prx_ERR_PROXY_UPDATE_FAILED' => 'ERROR: The proxy-update event returned an error.', -'prx_ERR_NO_SQUID_REC' => 'ERROR: There is no squid record in the configuration database.', -'prx_SUCCESS' => 'The new proxy settings were applied successfully.', -'prx_BLOCKED' => 'Blocked', -'Proxy settings' => 'Proxy settings', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Pseudonyms/pseudonyms_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Pseudonyms/pseudonyms_en.lex deleted file mode 100644 index 5698564..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Pseudonyms/pseudonyms_en.lex +++ /dev/null @@ -1,66 +0,0 @@ -''pse_NO_PSEUDONYMS'' => 'There are no pseudonyms in the system.', -'pse_REMOVE_PSEUDONYM' => 'Remove pseudonym', -'pse_ABOUT_TO_REMOVE' => 'You are about to remove the pseudonym: [_1]The server automatically creates -an e-mail alias for each group. If you want to define an e-mail -alias for a list of users, simply create a group and the -list will automatically be maintained by the server.
-Pseudonyms allow you to -create other names for existing users or groups. -For example, you may wish to create a pseudonym -"webmaster" for your "webdevelopers" group or a -pseudonym "joe" for the user "joseph".
-The server automatically creates pseudonyms of the form -firstname.lastname and firstname_lastname for every user -on the system and a pseudonym "everyone" which contains -all users on the system.
-Pseudonyms also allow you to create e-mail aliases for valid -(virtual) domains & users. For example you can forward -"sales@virtualdomain1.com" to user "mary" and -"sales@virtualdomain2.com" to user "john". -You must create the domains and user accounts before creating -the email aliases.
-Pseudonyms can also forward to other pseudonyms, although this -is limited to one further level. For example the pseudonym -"webmaster" can forward to the pseudonym "techsupport" which -then forwards to a specified user "ray". This is useful where -one user is responsiblefor multiple roles and saves having -to change the pseudonym\\'s associated with that user many times -in the event that the user departs the organisation.
-You can modify or remove a -pseudonym by clicking on the corresponding -command next to the pseudonym.
', -'pse_LOCAL_ONLY' => '(local network only)', -'pse_SELECT_ACCOUNT' => 'Select account or group', -'pse_SELECT_INTERNAL' => 'Local network only', -'pse_CLICK_TO_CREATE' => 'Add pseudonym', -'pse_PSEUDONYM' => 'Pseudonym', -'pse_USER_OR_GROUP' => 'User or group', -'pse_CURRENT_PSEUDONYMS' => 'Current List of Pseudonyms', -'pse_TITLE_CREATE' => 'Create a pseudonym', -'pse_DESC_PSEUDONYM_NAME' => 'Please select an existing account or group for the pseudonym from the pulldown menu below', -'pse_MODIFY_PSEUDONYM' => 'Modify Pseudonym', -'pse_PSEUDONYM_NAME' => 'Pseudonym name', -'pse_VALID_PSEUDONYM_NAMES' => 'The pseudonym - should contain only lower-case letters, numbers, period, - hyphen and underscore - and should start with a lower-case letter or - number. For example "sales", "john.holland", "123" - and "email-administrator" are all valid pseudonyms, - but "John Smith" and "Henry Miller" are not. -You can also create email aliases for accounts and (virtual) -domains that are valid on this server. For example -"fred@virtualdomain.com" can be forwarded to "mary" -(or to another valid user account).
', -'pse_NAME_IN_USE' => 'Error: That name is in use You cannot create a pseudonym with that name.', -'pse_NOT_A_PSEUDONYM' => 'That account is not a pseudonym', -'pse_PSEUDONYM_INVALID_DOMAIN' => 'That domain is not hosted on this server', -'pse_PSEUDONYM_INVALID_NOACCT' => 'That account is not hosted on this server', -'pse_PSEUDONYM_INVALID_SAMEACCT' => 'A pseudonym cannot point to the same account', -'pse_CREATE_SUCCEEDED' => 'Successfully created pseudonym', -'pse_MODIFY_SUCCEEDED' => 'Successfully modified pseudonym', -'pse_REMOVE_SUCCEEDED' => 'Successfully removed pseudonym', -'pse_EVERYONE' => 'Everyone', -'Pseudonyms' => 'Pseudonyms', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Qmailanalog/qmailanalog_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Qmailanalog/qmailanalog_en.lex deleted file mode 100644 index b5d4e46..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Qmailanalog/qmailanalog_en.lex +++ /dev/null @@ -1,26 +0,0 @@ -''qma_FORM_TITLE'' => 'Mail Log File Analysis', -'qma_INITIAL_DESC' => 'Analysing the mail system log files can aid both in -understanding how your system is performing and in -diagnosing delivery problems. Several different -reports are available.
-Please note that it may take several minutes to generate -these reports
', -'qma_REPORT_TYPE' => 'Choose a report type', -'qma_GENERATE_REPORT' => 'Generate report', -'qma_LIST_OUTGOING' => 'List outgoing messages and recipients', -'qma_SUMMARIZE_QUEUE' => 'Summarize status of mail queue', -'qma_SUCCESSFUL_DELIVERY_DELAY' => 'Successful delivery delay distribution', -'qma_REASONS_DEFERRAL' => 'Reasons for deferral', -'qma_REASONS_FAILURE' => 'Reasons for failure', -'qma_BASIC_STATS' => 'Basic statistics', -'qma_RECIP_STATS' => 'Recipients statistics', -'qma_RECIP_HOSTS' => 'Recipient hosts', -'qma_RECIP_ORDERED' => 'Recipients in best order for mailing lists', -'qma_SENDER_STATS' => 'Sender statistics', -'qma_SENDMAIL_STYLE' => 'Sendmail style log', -'qma_REASONS_SUCCESS' => 'Reasons for success', -'qma_SENDER_UIDS' => 'Sender uids', -'qma_INVALID_REPORT_TYPE' => 'Invalid report type:', -'qma_REPORT_GENERATED' => 'Report generated:', -'qma_END_OF_REPORT' => 'End of Report', -'Mail log file analysis' => 'Mail log file analysis', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Quota/quota_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Quota/quota_en.lex deleted file mode 100644 index 1362dad..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Quota/quota_en.lex +++ /dev/null @@ -1,38 +0,0 @@ -''quo_FORM_TITLE'' => 'Create, modify, or remove user account quotas', -'quo_UNABLE_TO_OPEN_ACCOUNTS' => 'Unable to open accounts db', -'quo_QUOTA_DESC' => 'You can set filesystem quotas for users on your system by clicking -the "Modify" button next to the user you wish to update. -
If the user exceeds the "Limit with grace period", warnings will be -generated. If this limit is exceeded for longer than a week or if the -"Absolute limit" is reached, the user will be unable to store any more -files or receive any more e-mail. -
A setting of \\'0\\' for either limit disables that limit for the -corresponding user. -
The disk space for each user includes the user\\'s home directory, -e-mail, and any files owned by the user in information bays.', -'quo_CURRENT_USAGE_AND_SETTINGS' => 'Current Quota Usage and Settings', -'quo_LIMIT_WITH_GRACE' => 'Limit with grace period', -'quo_LIMIT_WITH_GRACE_MB' => 'Limit with grace period (MB)', -'quo_ABS_LIMIT' => 'Absolute limit', -'quo_ABS_LIMIT_MB' => 'Absolute limit (MB)', -'quo_CURRENT_USAGE' => 'Current usage (MB)', -'quo_COULD_NOT_GET_UID' => 'Could not determine the uid for user:', -'quo_ERR_NO_SUCH_ACCT' => 'Error: there is no account named:', -'quo_ERR_NOT_A_USER_ACCT' => 'Error: the account is not a user account:', -'quo_ACCOUNT_IS_TYPE' => 'It is an account of type:', -'quo_MODIFY_USER_TITLE' => 'Modify user quota limits', -'quo_USER' => 'User:', -'quo_CURRENTLY_HAS' => 'currently has:', -'quo_FILES' => 'files', -'quo_OCCUPYING' => 'occupying:', -'quo_MEGABYTES' => 'megabytes', -'quo_INSTRUCTIONS' => 'Enter the quota with optional unit suffix of \\'K\\' for kilobytes, \\'M\\' for megabytes, -\\'G\\' for gigabytes or \\'T\\' for terabytes. -Entries with no suffix are assumed to be in megabytes. A setting of \\'0\\' -for either limit disables that limit for the corresponding user.', -'quo_SOFT_VAL_MUST_BE_NUMBER' => 'Error: limit with grace period must be a number, optionally followed by one of the unit suffixes K, M, G, or T.', -'quo_HARD_VAL_MUST_BE_NUMBER' => 'Error: absolute limit must be a number, optionally followed by one of the unit suffixes K, M, G, or T.', -'quo_ERR_HARD_LT_SOFT' => 'Error: absolute limit must be greater than limit with grace time.', -'quo_ERR_MODIFYING' => 'Error occurred while modifying user.', -'quo_SUCCESSFULLY_MODIFIED' => 'Successfully modified quota for user account:', -'Quotas' => 'Quotas', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Reboot/reboot_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Reboot/reboot_en.lex deleted file mode 100644 index 79c6cd5..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Reboot/reboot_en.lex +++ /dev/null @@ -1,17 +0,0 @@ -''rbo_FORM_TITLE'' => 'Shutdown or reboot', -'rbo_REBOOT' => 'Reboot', -'rbo_REBOOT_SUCCEEDED' => 'Reboot request initiated successfully.', -'rbo_DESC_REBOOT' => 'Your server has initiated the reboot process.', -'rbo_RECONFIGURE_SUCCEEDED' => 'Reconfiguration request initiated successfully.', -'rbo_DESC_RECONFIGURE' => 'Your server has initiated a full system reconfiguration and reboot.', -'rbo_SHUTDOWN_SUCCEEDED' => 'Shutdown request initiated successfully.', -'rbo_DESC_SHUTDOWN' => 'Your server has initiated the shutdown process. -The process will take several minutes to complete, after which -you can switch off the power.', -'rbo_LABEL_REBOOT' => 'Select Shutdown, Reboot or Reconfigure', -'rbo_DESCRIPTION' => 'You can reboot, shut down your server or perform a full system -reconfiguration from this screen. You must perform a shutdown -before switching the power off. All of these functions take -several minutes to complete. -When you click perform the operation will be initiated immediately, so be ready!', -'Reboot or shutdown' => 'Reboot or shutdown', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Remoteaccess/remoteaccess_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Remoteaccess/remoteaccess_en.lex deleted file mode 100644 index 2e3e96e..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Remoteaccess/remoteaccess_en.lex +++ /dev/null @@ -1,92 +0,0 @@ -''rma_FORM_TITLE'' => 'Change remote access settings', -'rma_DESCRIPTION' => 'For each of the options below, the private setting allows anyone -from your local network to access your server. The -public setting allows access from anywhere on the Internet. The no -access setting disables access. To understand the security -implications of changing these options from the default settings, you -should read the user\\'s guide section on remote access.', -'rma_SUCCESS' => 'The new remote access settings have been saved.', -'rma_NO_ACCESS' => 'No Access', -'rma_PASSWORD_LOGIN_PRIVATE' => 'Accept passwords only from local networks', -'rma_PASSWORD_LOGIN_PUBLIC' => 'Accept passwords from anywhere', -'rma_LABEL_TELNET_ACCESS' => 'Telnet access', -'rma_LABEL_FTP_ACCESS' => 'FTP access', -'rma_LABEL_FTP_LOGIN' => 'FTP password access', -'rma_LABEL_PPTP' => 'Number of PPTP clients', -'rma_NUMBER_OF_PPTP_CLIENTS_MUST_BE_LESSER_THAN_NUMBER_OF_IP_IN_DHCP_RANGE' => 'The number of pptp clients is greater than the number of reserved IP for DHCP. You should take a smaller number.', -'rma_LABEL_SSH_PORT' => 'TCP Port for secure shell access', -'rma_LABEL_SSH' => 'Secure shell access', -'rma_LABEL_SSH_ADMIN' => 'Allow administrative command line access over secure shell', -'rma_LABEL_SSH_PASSWORD_ACCESS' => 'Allow secure shell access using standard passwords', -'rma_TITLE_SSH' => 'Secure Shell Settings', -'rma_DESC_SSH' => 'You can control Secure Shell access to your server. -The public setting should only be enabled by -experienced administrators -for remote problem diagnosis and resolution. -We recommend leaving this -parameter set to "No Access" -unless you have a specific reason to do otherwise.', -'rma_TITLE_FTP_ACCESS' => 'FTP Settings', -'rma_DESC_FTP_ACCESS' => 'You can also control FTP access to your server. We -recommend leaving this parameter set to \\'no access\\' unless you -have a specific reason to do otherwise. -
-Note: these settings limit access to the server and override other -settings, including those for individual information bays.
', -'rma_DESC_FTP_LOGIN' => 'You can also control authenticated FTP access to information -bays and user accounts. We strongly recommend leaving this -parameter set to private unless you have a specific reason to -do otherwise. --Note: a secure shell sftp client can also be used to access the -server, if remote access via the secure shell is enabled. -This method of access protects the -passwords and data of the FTP session, whereas standard FTP -provides no protection.
', -'rma_TITLE_PPTP' => 'PPTP Settings', -'rma_DESC_PPTP' => 'You can allow PPTP access to your server. -You should leave this feature disabled by setting the value -to the number 0 unless you require PPTP access.', -'rma_VALUE_ZERO_OR_POSITIVE' => 'Value must be zero or a positive integer', -'rma_REMOTE_MANAGEMENT' => 'Remote Management', -'rma_VALIDFROM_TITLE' => '[_1]', -'rma_VALIDFROM_DESC' => 'It is possible to allow hosts on remote networks to access the -server manager by entering those networks here. Use a subnet -mask of 255.255.255.255 to limit the access to the specified host. -Any hosts within the specified range will be able to access the -server manager using HTTPS.', -'rma_DESC_VALID_FROM_ENTRIES' => 'To add a new remote management network, -enter the details below.', -'rma_SUBNET_MASK' => 'Subnet mask', -'rma_NUM_OF_HOSTS' => 'Number of hosts', -'rma_NO_ENTRIES_YET' => 'There are no entries yet', -'rma_INVALID_SUBNET_MASK' => 'Invalid subnet mask', -'rma_ERR_INVALID_PARAMS' => 'Either provide both a network and subnet mask, or leave both -fields blank.', -'rma_ERR_NO_RECORD' => 'Unable to locate httpd-admin record in configuration db', -'Remote access' => 'Remote access', -'rma_LABEL_SERIAL_CONSOLE_ACCESS' => 'Serial console', -'rma_DESC_SERIAL_CONSOLE_ACCESS' => 'You can modify, lock or remove any account or reset the account\\'s password by clicking on the corresponding command next to the account.
If the account is marked as locked, that means that the user\\'s password needs to be reset. Please note that newly created accounts are automatically locked until the password is changed.
', -'usr_P2_TITLE' => 'Create or modify', -'usr_CREATE_MODIFY_DESC' => 'The account name should contain only lower-case letters, numbers, hyphens, periods, underscores and should start with a lower-case letter. For example "betty","hjohnson", and "mary-jane" are all valid account names, but "3friends", "John Smith", and "henry:miller" are not.
Note that two special pseudonyms will be created for each new account. These pseudonyms provide the ability to have alternative mail accounts for that user which include their first name and last name separated with a period (.) and underscore (_). So, for the account "betty" with first name "Betty" and last name "Rubble" two pseudonyms are created as betty.rubble and betty_rubble.
The directory information (department, company, etc.) can be changed from the defaults shown below. The changes will apply only to this user.
', -'usr_ADD_USER' => 'Add user account', -'usr_MODIFY_ADMIN_TITLE' => 'Modify the admin account', -'usr_USER_CREATED' => 'Successfully created user account.', -'usr_USER_MODIFIED' => 'Successfully modified user account.', -'usr_CANNOT_MODIFY_USER' => 'Error: an internal error occurred while attempting to modify the user "[_1]".', -'usr_CANNOT_MODIFY_USER_GROUPS' => 'Error: an internal error occurred while attempting to modify the group "[_1]" for user "[_2]".', -'usr_TAINTED_USER' => 'The account name "[_1]" contains invalid characters.', -'usr_ACCOUNT_NAME' => 'Account name', -'usr_FIRSTNAME' => 'First name', -'usr_LASTNAME' => 'Last name', -'usr_DEPARTMENT' => 'Department', -'usr_COMPANY' => 'Company', -'usr_STREET_ADDRESS' => 'Street address', -'usr_CITY' => 'City', -'usr_PHONE_NUMBER' => 'Phone number', -'usr_EMAIL_DELIVERY' => 'Email delivery', -'usr_DELIVER_EMAIL_LOCALLY' => 'Deliver email locally', -'usr_FORWARD_EMAIL' => 'Forward email to address below', -'usr_DELIVER_AND_FORWARD' => 'Both deliver locally and forward', -'usr_FORWARDING_ADDRESS' => 'Forwarding address', -'usr_GROUP_MEMBERSHIPS' => 'Group memberships', -'usr_RESET_DESC' => 'You are about to change the password for the user account "[_1]" ([_2])', -'usr_RESET_DESC2' => 'Enter the new password in the fields below', -'usr_ERR_OCCURRED_MODIFYING_PASSWORD' => 'An error occurred while updating the password', -'usr_PASSWORD_CHANGE_SUCCEEDED' => 'Successfully changed password for user "[_1]".', -'usr_LOCK_DESC' => 'You are about to lock the user account "[_1]" ([_2])', -'usr_LOCKED_ACCOUNT' => 'Successfully locked account for user "[_1]".', -'usr_NO_SUCH_USER' => 'Error: the user account "[_1]" does not exist.', -'usr_PSEUDONYM_CLASH' => 'Error: the pseudonym "[_1]" is already taken by the existing user account "[_1]".To differentiate, add initials to this field.', -'usr_LOCK_ACCOUNT' => 'Lock account', -'usr_LOCK_ACCOUNT_TITLE' => 'Lock user account', -'usr_LOCK_DESC2' => 'This user account will be locked. This means that this user will not be able to log in, and will not be able to collect e-mail. Any e-mail arriving will still be stored and/or forwarded to an external e-mail address, as configured. The account may be activated in the future by setting a new password. The current password will not be retained.Are you sure you wish to lock this account?', -'usr_REMOVE_ACCOUNT_TITLE' => 'Remove user account', -'usr_REMOVE_DESC' => 'You are about to remove the user account "[_1]" ([_2])', -'usr_REMOVE_DESC2' => 'All files belonging to this user account will be deleted. Also, any e-mail for this user account still remaining on the server (i.e. that has not yet been retrieved by the user) will be discarded.
Are you sure you wish to remove this account?', -'usr_LOCK' => 'Lock', -'usr_NO_USER_ACCOUNTS' => 'There are no user accounts on this system.', -'Users' => 'Users', -'usr_ACCT_NAME_HAS_INVALID_CHARS' => 'The account name "[_1]" contains invalid characters. Account names must start with a lower case letter and contain only lower case letters, numbers, hyphens, periods and underscores.', -'usr_ACCOUNT_TOO_LONG' => 'Error: account name is too long. The maximum is [_1] characters.', -'usr_ACCOUNT_CONFLICT' => 'Error: the account "[_1]" can\\'t be created because there is already a [_1] account of that name.', -'usr_ERR_OCCURRED_CREATING' => 'An error occurred creating the user.', -'usr_CANNOT_CONTAIN_WHITESPACE' => 'This field cannot contain white-space', -'usr_UNACCEPTABLE_CHARS' => 'This field must contain only letters, numbers, dots, hypens and underscores and start with a letter', -'usr_MEMBER' => 'Member?', -'usr_VPN_CLIENT_ACCESS' => 'VPN Client Access', -'usr_SYSTEM_PASSWORD_FORM_TITLE' => 'Change system password', -'usr_SYSTEM_PASSWORD_DESCRIPTION' => 'Certain services on this server installation require a username and password (for example this web page for the server manager application). The username is always admin. You can change the system password using the fields below.', -'usr_SYSTEM_PASSWORD_UNPRINTABLES_IN_PASS' => 'Password must contain only printable characters', -'usr_SYSTEM_PASSWORD_VERIFY_ERROR' => 'The two passwords are not identical.', -'usr_SYSTEM_PASSWORD_AUTH_ERROR' => 'The current password is incorrect.', -'usr_SYSTEM_PASSWORD_CHANGED' => 'The system password has been changed.', -'usr_CURRENT_SYSTEM_PASSWORD' => 'Current system password', -'usr_NEW_SYSTEM_PASSWORD' => 'New system password', -'usr_NEW_SYSTEM_PASSWORD_VERIFY' => 'New system password (verify)', -'usr_LABEL_IPSECRW_DOWNLOAD' => 'Download digital certificate to IPSec client', -'usr_ERR_OCCURRED_DELETING' => 'An error occurred while trying to delete the user.', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Userpassword/userpassword_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Userpassword/userpassword_en.lex deleted file mode 100644 index 9b8f7f6..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Userpassword/userpassword_en.lex +++ /dev/null @@ -1,21 +0,0 @@ -'pwd_FIELDS_REQUIRED' => 'All fields are required', -'pwd_ERROR_PASSWORD_CHANGE' => 'An error occurred while attempting to change your password. Please make sure that the old password entered is correct.', -'pwd_PASSWORD_CHANGE' => 'Change Password', -'pwd_RESET_PASSWORD_TITLE' => 'Reset user password', -'pwd_ACCOUNT_PASSWORD_CHANGE' => 'Change account password', -'pwd_PASSWORD_VERIFY_NEW' => 'New password (verify):', -'pwd_PASSWORD_NEW' => 'New password:', -'pwd_PASSWORD_OLD' => 'Old password:', -'pwd_PASSWORD_RESET' => 'Reset password', -'pwd_ACCOUNT_NAME_INVALID' => 'The account name entered is invalid.', -'pwd_ACCOUNT_NAME_INVALID_CHARS' => 'The account name you entered contained invalid characters.', -'pwd_PASSWORD_OLD_INVALID_CHARS' => 'The old password you entered contained invalid characters.', -'pwd_PASSWORD_INVALID_CHARS' => 'The password you entered contained invalid characters.', -'pwd_PASSWORD_VERIFY_ERROR' => 'The new passwords you entered did not match.', -'pwd_ACCOUNT_USER_NONE' => 'There are no user accounts in the system.', -'pwd_ACCOUNT_GROUP_NONE' => 'There are no user groups in the system.', -'pwd_YOUR_ACCOUNT' => 'Your account:', -'pwd_YOUR_ACCOUNT_INVALID' => 'The account name entered is invalid.', -'pwd_PASSWORD_CHANGE_SUCCESS' => 'Your password has been successfully changed.', -'pwd_DESCRIPTION' => '
To change your account password, please fill out the following form. You will need to provide the name of your account, your old password, and your desired new password. (You must type the new password twice.)
If you cannot change your password because you have forgotten the old one, your local system administrator can reset your password using the server manager.
', -'pwd_DESCRIPTION_RESET' => 'To reset your account password, please fill out the following form. You will need to provide your desired new password. (You must type it twice.)
In cas of problem, your local system administrator can reset your password using the server manager.
', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Viewlogfiles/viewlogfiles_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Viewlogfiles/viewlogfiles_en.lex deleted file mode 100644 index 65d9a5f..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Viewlogfiles/viewlogfiles_en.lex +++ /dev/null @@ -1,38 +0,0 @@ -''log_FORM_TITLE'' => 'View log files', -'log_FIRSTPAGE_DESC' => 'This panel allows you to view or download the log files generated -by the services running on your server.', -'log_LOG_FILE_SELECT_DESC' => 'Choose a log file to view', -'log_FILTER_PATTERN_DESC' => 'You may optionally specify a filter pattern to display only the -lines from the log file which match this pattern.If you leave -this field blank, all available lines of the log file will be -displayed. Note that this option is not used if you download the -logfile.', -'log_FILTER_PATTERN_LABEL' => 'Filter Pattern (optional)', -'log_MATCH_PATTERN_DESC' => 'You may also optionally specify a highlight pattern to mark in bold -any lines from the log file which match the highlight pattern. The -highlight pattern is applied to any lines which have already -matched the filter pattern. Note that this option is not used if -you download the logfile.', -'log_MATCH_PATTERN_LABEL' => 'Highlight Pattern (optional)', -'log_END_DESC' => 'Please note that it may take quite some time to generate these -reports.', -'log_VIEW' => 'View log file', -'log_LOG_FILE_EMPTY' => 'Log file "[_1]" is empty!', -'log_VIEWING_TIME' => 'Viewed at [_1].', -'log_MATCH_HEADER' => 'Displaying lines matching: "[_1]".', -'log_HIGHLIGHT_HEADER' => 'Highlighting lines matching: "[_1]".', -'log_NO_MATCHING_LINES' => 'No matching lines displayed.', -'log_FILENAME_ERROR' => 'Error while specifying log file name.
-Invalid report type "[_1]".
', -'log_REFRESH' => 'Refresh this logfile', -'log_OP_DESC' => 'You must choose between viewing the logfile in your browser, or -downloading the logfile to your computer. If the logfile is -particularly large, you may wish to download it instead of -attempting to open it in your browser, as this is a problem for -some web browsers.', -'log_OP_LABEL' => 'Operation', -'log_DOWNLOAD_PAGE_DESC' => 'Your logfile download is now prepared. It will proceed as soon -as you click on the "Next" button below, and instruct -your browser to accept the download via the pop-up window that -will appear.', -'log_DOWNLOAD_FILE' => 'Preparing to download the logfile [_1].', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Workgroup/workgroup_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Workgroup/workgroup_en.lex deleted file mode 100644 index 9db3788..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Workgroup/workgroup_en.lex +++ /dev/null @@ -1,26 +0,0 @@ -''wkg_FORM_TITLE'' => 'Change workgroup settings', -'wkg_DESC_WORKGROUP' => 'Enter the name of the Windows workgroup that this server should appear in.', -'wkg_LABEL_WORKGROUP' => 'Windows workgroup', -'wkg_DESC_SERVERNAME' => 'Enter the name that this server should use for -Windows and Macintosh file sharing.', -'wkg_LABEL_SERVERNAME' => 'Server Name', -'wkg_DESC_PDC' => 'Should this server act as the workgroup -and domain controller on your Windows network? You should leave -this set to No if another server is already performing this -role on your network.', -'wkg_LABEL_PDC' => 'Workgroup and Domain Controller', -'wkg_DESC_ROAM' => 'Should this server support roaming profiles? -You should leave this set to the default of No unless you have -experience administering server-based Windows roaming profiles and -know that this feature is required.', -'wkg_LABEL_ROAM' => 'Roaming profiles', -'wkg_SUCCESS' => 'The new workgroup settings have been saved', -'wkg_INVALID_WORKGROUP' => 'The workgroup name must begin with a letter (upper or lower -case), followed by any combination of letters, numbers, -underscores, periods and hyphens.', -'wkg_INVALID_SERVERNAME' => 'The server name must begin with a letter (upper or lower case), -followed by any combination of letters, numbers, underscores and -hyphens.', -'wkg_INVALID_WORKGROUP_MATCHES_SERVERNAME' => 'The server and workgroup names match, when compared in lower case. -These values must be different in order for filesharing to be turned on.', -'Workgroup' => 'Workgroup', diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Yum/yum_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Yum/yum_en.lex deleted file mode 100644 index 5e1ed8a..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Yum/yum_en.lex +++ /dev/null @@ -1,78 +0,0 @@ -''yum_FORM_TITLE'' => 'Software installer', -'yum_SUCCESS' => 'The new settings have been saved.', -'yum_LABEL_YUM_STATUS' => 'Check for updates', -'yum_LABEL_YUM_AUTOINSTALLUPDATES' => 'Automatically install updates', -'yum_DESC_YUM_AUTOINSTALLUPDATES' => 'If enabled this will take precedence over the simple check for updates notification and predownload features. Instead it will install the available updates from enabled repositories. For more information refer to yum and yum-cron manual page.', -'yum_LABEL_YUM_PACKAGEFUNCTIONS' => 'Manage individual packages', -'yum_DESC_YUM_PACKAGEFUNCTIONS' => 'The software installer can manage groups of -related package or individual packages. By -default, only groups of packages are presented. -If you wish to manage individual packages, -enable this option. This should only be done -by experienced administrators.', -'yum_LABEL_ENABLED_REPOSITORIES' => 'Enabled repositories', -'yum_DESC_ENABLED_REPOSITORIES' => 'The software installer can install software -from any of enabled repositories. To enable -a repository, select it from the list. -To disable a repository, de-select it from the list. -By default, only stable, tested software is available -for installation.', -'yum_TITLE_UPTODATE' => 'This system is up to date.', -'yum_DESC_UPTODATE' => 'All updates have been installed.', -'yum_TITLE_UPDATES_AVAILABLE' => 'Updates Available', -'yum_DESC_UPDATES_AVAILABLE' => 'There are updates available for your system. These updates -should be installed as soon as possible.', -'yum_LABEL_AVAILABLE_UPDATES' => 'Updates available', -'yum_DESC_AVAILABLE_UPDATES' => 'The following updates are available for your system. -You should normally install all available updates. -If there are updates you do not wish to install, de-select -them from the list below.', -'yum_INSTALL_UPDATES' => 'Install selected updates', -'yum_BUTTON_INSTALL_UPDATES' => 'List available updates', -'yum_HEADER_AVAILABLE_SOFTWARE' => 'The following software is available to be installed -onto your system. You should only install additional -software onto this system if you are aware -of the consequences of doing so.', -'yum_DESC_AVAILABLE_GROUPS' => 'You can select software groups -to install from the list below.', -'yum_LABEL_AVAILABLE_GROUPS' => 'Available groups', -'yum_DESC_AVAILABLE_PACKAGES' => 'You can also select individual packages -to install from the list below.', -'yum_LABEL_AVAILABLE_PACKAGES' => 'Available packages', -'yum_INSTALL_SOFTWARE' => 'Install', -'yum_HEADER_INSTALLED_SOFTWARE' => 'The following software is installed -on this system. You should only remove -software from this system if you are aware -of the consequences of doing so.', -'yum_DESC_INSTALLED_GROUPS' => 'You can select software groups -to remove from the list below.', -'yum_LABEL_INSTALLED_GROUPS' => 'Installed groups', -'yum_DESC_INSTALLED_PACKAGES' => 'You can also select individual packages -you wish to remove from the list below.', -'yum_LABEL_INSTALLED_PACKAGES' => 'Installed packages', -'yum_BUTTON_CONFIGURATION' => 'Change software installer settings', -'yum_BUTTON_INSTALL_AVAILABLE' => 'Install additional software', -'yum_BUTTON_REMOVE' => 'Remove installed software', -'yum_HEADER_POSTUPGRADE_REQUIRED' => 'The system needs to be reconfigured - after adding or removing software, - or applying updates. --Please click on the Reconfigure button at the bottom of -this page to start the reconfiguration process. - An automatic reboot will be - initiated as part of this reconfiguration process -
', -'yum_SYSTEM_BEING_RECONFIGURED' => 'Your system is being automatically rebooted to -complete the reconfiguraton process.', -'yum_1DAILY' => 'Daily', -'yum_2WEEKLY' => 'Weekly', -'yum_3MONTHLY' => 'Monthly', -'yum_LABEL_YUM_DELTARPMPROCESS' => 'Delta Rpm Update', -'yum_DESC_YUM_DELTARPMPROCESS' => 'A deltarpm contains the difference between an old and a new version of a rpm, - which can save bandwith. The drawback is that update - operations consume considerably more CPU cycles', -'yum_LABEL_YUM_DOWNLOADONLY' => 'Predownload updates', -'yum_DESC_YUM_DOWNLOADONLY' => 'The rpm updates can be downloaded during the night, - this will ease and give faster the yum update process - (only enabled repositories will be used).', -'yum_UPDATE_SUCCESS' => 'The requested changes have been successfully implemented.',