initial commit of file from CVS for e-smith-flexbackup on Wed 12 Jul 08:54:20 BST 2023

root/etc/e-smith/templates/etc/flexbackup.conf/10AfioParams

@@ -0,0 +1,15 @@
+{
+# ----------------------------------------------------------------------
+# Parameters for 'afio' only
+
+# True to show block numbers}
+$afio_echo_block = 'false';
+{
+# Files less than this size (kilobytes) won't be compressed}
+$afio_compress_threshold = '3';
+{
+# Maximum amount of memory (megabytes) to use for temporary storage of
+# compression results.  If a compressed file is bigger than this, compression
+# will have to run twice on the file (see manpage).}
+$afio_compress_cache_size = '2';
+

root/etc/e-smith/templates/etc/flexbackup.conf/10Blocksize

@@ -0,0 +1,13 @@
+{
+# Block size (k) to use (default for most things is 10)
+# mt_var_blksize says to use "variable" block size for the tape device
+# (mt setblk 0)
+# If false, will use the $blksize parameter above. All non-mt commands
+# will still use $blksize regardless of this value.
+    my $blksize = $flexbackup{Blocksize} || '32';
+    $OUT = '$blksize = "' . $blksize . '";';
+    $OUT .= "\n";
+
+    my $mt_blksize = $flexbackup{TapeBlocksize} || '0';
+    $OUT .= '$mt_blksize = "' . $mt_blksize . '";';
+}

root/etc/e-smith/templates/etc/flexbackup.conf/10Buffering

@@ -0,0 +1,5 @@
+{# Buffering}
+$buffer      = '{ $flexbackup{BufferProg} || 'buffer' }'; {# name of buffer program to help streaming}
+$buffer_megs = '{ $flexbackup{BufferMegs} || '20' }';     {# buffer memory size (in megabytes)}
+$pad_blocks  = 'true';  {# true to pad blocks to blocksize}
+

root/etc/e-smith/templates/etc/flexbackup.conf/10Compression

@@ -0,0 +1,4 @@
+{# Compression}
+$compress    = 'gzip';  {# one of false/gzip/bzip2/compress/hardware}
+$compr_level = '4';     {# compression level (1-9) (for gzip/bzip2/zip)}
+

root/etc/e-smith/templates/etc/flexbackup.conf/10CpioParams

@@ -0,0 +1,6 @@
+{# ----------------------------------------------------------------------
+# Parameters for 'cpio' only
+
+# Format of cpio archive}
+$cpio_format = 'newc';
+

root/etc/e-smith/templates/etc/flexbackup.conf/10Device

@@ -0,0 +1,11 @@
+{# Device to backup to - non-rewinding version please!
+#
+# Examples:
+#    Linux SCSI: /dev/nst0       Linux IDE: /dev/nht0
+#    Linux ftape: /dev/nqft0     FreeBSD SCSI: /dev/nrsa0
+#
+# If a directory, archive to files in that directory rather than a device
+#
+    my $device = $backup{'Device'} || '/dev/nst0';
+    $OUT .= "\$device = '$device';";
+}

root/etc/e-smith/templates/etc/flexbackup.conf/10DumpParams

@@ -0,0 +1,11 @@
+{# ----------------------------------------------------------------------
+# Parameters for 'dump' only
+
+# Estimated tape size (in kilobytes). This number doesn't really do much
+# but help 'dump' get size estimates if set to zero uses 'dump -a'}
+$dump_length = '0';
+{
+# True to use /etc/dumpdates (could mess things up if you dump subdirectories
+# of mount points).  False to use flexbackup's timestamps.}
+$dump_use_dumpdates = 'false';
+

root/etc/e-smith/templates/etc/flexbackup.conf/10EraseRewindOnly

@@ -0,0 +1,6 @@
+# Set this to "true" to make erase operations just rewind - not really
+# call "mt erase".  For some tape drives, erase takes hours rather
+# than seconds.
+$erase_rewind_only = '{
+    $flexbackup{erase_rewind_only} || 'false'
+}';

root/etc/e-smith/templates/etc/flexbackup.conf/10EraseTapeAllZero

@@ -0,0 +1,4 @@
+{# If true (default), level zero "set" assumes you want to erase and use
+# a new tape. If false, level zero "set" appends like all other backups}
+$erase_tape_set_level_zero = 'true';
+

root/etc/e-smith/templates/etc/flexbackup.conf/10Exclude_expr00

@@ -0,0 +1,8 @@
+{# Exclude files that match these *regular expressions* (not shell wildcards)
+# from the backups (no affect on 'dump' archives). You can list more than one,
+# just keep incrementing the index in the brackets for each.  Also, strip off
+# leading directories (the filesystem specs above or the "-fs" flag).
+# Comment these out to exclude nothing.}
+$exclude_expr[0] = 'news/articles';
+$exclude_expr[1] = '.*~$';  {#'# single quote so emacs font-lock is happy}
+$exclude_expr[2] = './aquota.*';

root/etc/e-smith/templates/etc/flexbackup.conf/10Globals

@@ -0,0 +1,9 @@
+{# Other global flags}
+$remoteshell = 'ssh';   {# command for remote shell (rsh/ssh/ssh2)}
+$remoteuser = '';       {# secondary user name for remote shells (not set) }
+$label = 'true';        {# store identifying label in archive }
+$verbose     = 'false';  {# echo each file? (for afio/tar/cpio/zip)}
+$sparse      = 'true';  {# handle sparse files (for afio/tar/cpio)}
+$indexes     = 'true';  {# false to turn off all table-of-contents support}
+$atime_preserve = 'true'; {# preserve access time (if possible) during backup }
+$staticfiles = 'false'; {# Use non-dated filename if backing up to file }

root/etc/e-smith/templates/etc/flexbackup.conf/10Logging

@@ -0,0 +1,16 @@
+{# ----------------------------------------------------------------------
+# Log/stamp files, path for temporary files
+}
+$staticlogs = "false";               {# use dated log files}
+$logdir	  = "/var/log/flexbackup";   {# directory for log files}
+$stampdir = "/var/state/flexbackup"; {# directory for backup timestamps}
+$index    = "$stampdir/index";       {# DB filename for tape indexes}
+$comp_log = "gzip";                  {# compress log? false/gzip/bzip2/compress}
+$prefix	  = "";			     {# log files will start with this prefix}
+$sprefix  = "";	                     {# stamp files will start with this prefix}
+$tmpdir   = "/tmp";                  {# used for temporary refdate files, etc}
+{
+# Why do I suggest /var/state/flexbackup for the stamp/indexes?
+# See the FHS, http://www.pathname.com/fhs/2.0/fhs-5.11.html
+# BSD users probably want /var/db/flexbackup
+}

root/etc/e-smith/templates/etc/flexbackup.conf/10MtTell

@@ -0,0 +1,5 @@
+{
+    $OUT =<<'HERE';
+$mt{'tell'} = 'status';
+HERE
+}

root/etc/e-smith/templates/etc/flexbackup.conf/10NoCompressTypes00

@@ -0,0 +1,4 @@
+{# File extensions that should not be compressed (seperate with spaces)
+# For afio and zip only (since they do each file individually)}
+$nocompress_types = 'mp3 Z z gz gif zip lha jpeg jpg taz tgz deb rpm bz2';
+

root/etc/e-smith/templates/etc/flexbackup.conf/10TarParams

@@ -0,0 +1,9 @@
+{# ----------------------------------------------------------------------
+# Parameters for 'tar' only
+
+# True to show record numbers}
+$tar_echo_record_num = 'false';
+{
+# True to preserve file access times}
+$tar_atime_preserve = 'true';
+

root/etc/e-smith/templates/etc/flexbackup.conf/10Traverse_fs

@@ -0,0 +1,4 @@
+{# Span across filesytems? ("dump" will ignore this option)
+# Set to "false" (don't) , "local" (all but nfs), or "all" (everything)}
+$traverse_fs = 'false';
+

root/etc/e-smith/templates/etc/flexbackup.conf/10ZipParams

@@ -0,0 +1,4 @@
+{# ----------------------------------------------------------------------
+# Parameters for 'zip' only
+
+}

root/etc/e-smith/templates/etc/flexbackup.conf/10filesystems

@@ -0,0 +1,31 @@
+{
+# List the filesystems you wish to dump when 'all' is given
+# Just a simple space-separated list
+# Remote filesystems should denoted as 'host:dir'
+#
+# Example:
+#   $filesystems[0] = '/ /usr /home machine1:/usr machine2:/home';
+#
+# If you want an 'all' level 0 backup to span multiple tapes, add more lines
+# You will be prompted for tape change in between.
+#
+    my @filesys = ();
+    my $outstring;
+
+    open(FSTAB, "</etc/fstab") or die "Can't open fstab file";
+    while (<FSTAB>)
+    {
+	/\S+\s+(\S+)\s+(\S+)\s+(\S+)/ &&
+	    ($2 eq "ext2" or $2 eq "ext3" or $2 eq "ext4" or $2 eq "xfs") &&
+	    $3 !~ /(?:noauto|loop)/ &&
+	    $1 !~ /^\/var\/spool\/squid/ &&
+	    $1 !~ /^\/boot$/ &&
+	push @filesys, $1;
+    }
+    close FSTAB;
+    $outstring = "\$set{'full'} = '";
+    $outstring .= join(' ', @filesys);
+    $outstring .= "';";
+    $outstring;
+}
+

root/etc/e-smith/templates/etc/flexbackup.conf/10prune_tree

@@ -0,0 +1,10 @@
+{
+    my @prunelist = split(',', $flexbackup{Prune} || '');
+    
+    return "" unless (scalar @prunelist);
+
+    $OUT = '$prune';
+    $OUT .= "{'/'} = '";
+    $OUT .= join(' ', @prunelist);
+    $OUT .= "';";
+}

root/etc/e-smith/templates/etc/flexbackup.conf/10type

@@ -0,0 +1,4 @@
+$type = '{# Archive type?  afio, dump, tar, cpio, or zip
+    my $type = $flexbackup{Type} || 'tar';
+    $OUT = "$type";
+}';