smeserver-bridge-interface/root/sbin/e-smith/systemd/bridge-run

182 lines
4.6 KiB
Bash

#!/bin/bash
# Bridge service on SME
# This service will configure a bridge interface on your server
# allowing each enslaved interfaces to act as a switch port.
# Source function library.
. /etc/rc.d/init.d/functions
# Bridge Interface
BRIDGE_IF=$(/sbin/e-smith/db configuration getprop bridge bridgeInterface)
BRIDGE_PROMISC=$(/sbin/e-smith/db configuration getprop bridge Promiscuous)
# Define list of TAP interfaces to be bridged,
# for example tap="tap0 tap1 tap2".
# Defaults is tap0
TAP_IF=$(/sbin/e-smith/db configuration getprop bridge tapInterface)
# Replace ; and , with spaces
TAP_IF=$(echo $TAP_IF | sed -e "s/[,;]/ /g")
# Define physical ethernet interface to be bridged
# with TAP interface(s) above.
ETH_IF=$(/sbin/e-smith/db configuration getprop bridge ethernetInterface)
ETH_MAC=$(/sbin/e-smith/db configuration getprop InternalInterface HWAddress)
ETH_IP=$(/sbin/e-smith/db configuration get LocalIP)
ETH_MASK=$(/sbin/e-smith/db configuration getprop InternalInterface Netmask)
# System mode: serveronly, server&gateway ...
MODE=$(/sbin/e-smith/db configuration get SystemMode)
# Path of openvpn binary
openvpn=""
openvpn_locations="/usr/sbin/openvpn /usr/local/sbin/openvpn"
for location in $openvpn_locations
do
if [ -f "$location" ]
then
openvpn=$location
fi
done
# Check that binary exists
if ! [ -f $openvpn ]
then
echo "openvpn binary not found"
exit 0
fi
# Sub to reconfigure the firewall
firewall(){
/sbin/e-smith/expand-template /etc/rc.d/init.d/masq >/dev/null 2>&1
#/sbin/service masq restart >/dev/null 2>&1
/usr/bin/systemctl try-restart masq.service >/dev/null 2>&1
}
# Sub to restart dhcpd
dhcpd(){
#/usr/bin/sv t dhcpd
/usr/bin/systemctl try-restart dhcpd.service >/dev/null 2>&1
}
# Sub to reconfigures routes and defaults gateway
routes(){
# We need to push all the routes of local networks as the interface has changed
for NET in $(/sbin/e-smith/db networks keys); do
SYSTEM=$(/sbin/e-smith/db networks getprop $NET SystemLocalNetwork)
if (! test $SYSTEM); then
NETMASK=$(/sbin/e-smith/db networks getprop $NET Mask)
ROUTER=$(/sbin/e-smith/db networks getprop $NET Router)
/sbin/route add -net $NET netmask $NETMASK gw $ROUTER >/dev/null 2>&1
fi
done
# If the server runs in serveronly, we need to reconfigure the default gateway:
if [ $MODE == 'serveronly' ]; then
GW=$(/sbin/e-smith/db configuration get GatewayIP)
/sbin/route add default gw $GW >/dev/null 2>&1
fi
}
start(){
# prep : filtering module
/usr/sbin/modprobe br_netfilter
# First, create the bridge interface
/usr/sbin/brctl addbr $BRIDGE_IF
# Then, create the tap interface(s) and enslave it in the bridge one
for t in $TAP_IF; do
$openvpn --mktun --dev $t >/dev/null 2>&1
/sbin/ifconfig $t 0.0.0.0 promisc up >/dev/null 2>&1
/usr/sbin/brctl addif $BRIDGE_IF $t >/dev/null 2>&1
done
# Now make the real ethernet interface promiscuous
/sbin/ifconfig $ETH_IF 0.0.0.0 promisc up >/dev/null 2>&1
sleep 1
# And add it to the bridge
/usr/sbin/brctl addif $BRIDGE_IF $ETH_IF >/dev/null 2>&1
[ -n "$ETH_MAC" ] && /sbin/ifconfig $BRIDGE_IF hw ether $ETH_MAC
[ "$BRIDGE_PROMISC" == "yes" ] && /sbin/ifconfig $BRIDGE_IF promisc
# Now configure the LocalIP on the bridge interface
/sbin/e-smith/db configuration setprop InternalInterface Name $BRIDGE_IF
/sbin/ifconfig $BRIDGE_IF $ETH_IP netmask $ETH_MASK >/dev/null 2>&1
# Push the routes for the new interface
routes
# Now we have to reconfigure the firewall
firewall
# And dhcpd (the configuration file is expanded each time the service starts
# so no need to do it manually
dhcpd
}
stop(){
# Shutdown the bridge and remove it
/sbin/ifconfig $BRIDGE_IF down >/dev/null 2>&1
/usr/sbin/brctl delbr $BRIDGE_IF >/dev/null 2>&1
# Then delete each tap interfaces
for t in $TAP_IF; do
$openvpn --rmtun --dev $t >/dev/null 2>&1
done
# Reconfigure the ethernet interface
/sbin/e-smith/db configuration setprop InternalInterface Name $ETH_IF
/sbin/ifconfig $ETH_IF $ETH_IP netmask $ETH_MASK up -promisc >/dev/null 2>&1
# Push the routes
routes
# restart the firewall
firewall
# and dhcp
dhcpd
}
case "$1" in
start)
echo -n $"Starting Bridge Service: "
start
RETVAL=$?
;;
stop)
echo -n $"Stoping Bridge Service: "
stop
RETVAL=$?
;;
restart)
echo -n $"Restarting Bridge Service: "
stop && start
RETVAL=$?
;;
adjust)
echo -n $"Restarting Bridge Service: "
stop && start
RETVAL=$?
;;
*)
echo "Usage: $0 start|stop|restart"
;;
esac
if [ $RETVAL -eq 0 ]; then
echo_success
else
echo_failure
fi
echo
exit $RETVAL