diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..cbb3a13 --- /dev/null +++ b/.gitignore @@ -0,0 +1,4 @@ +*.rpm +*.log +*spec-20* +*.tar.gz diff --git a/Makefile b/Makefile new file mode 100644 index 0000000..0f2bc02 --- /dev/null +++ b/Makefile @@ -0,0 +1,21 @@ +# Makefile for source rpm: smeserver-onlyoffice +# $Id: Makefile,v 1.1 2022/06/23 15:43:03 jpp Exp $ +NAME := smeserver-onlyoffice +SPECFILE = $(firstword $(wildcard *.spec)) + +define find-makefile-common +for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then if [ -f $$d/CVS/Root -a -w $$/Makefile.common ] ; then cd $$d ; cvs -Q update ; fi ; echo "$$d/Makefile.common" ; break ; fi ; done +endef + +MAKEFILE_COMMON := $(shell $(find-makefile-common)) + +ifeq ($(MAKEFILE_COMMON),) +# attept a checkout +define checkout-makefile-common +test -f CVS/Root && { cvs -Q -d $$(cat CVS/Root) checkout common && echo "common/Makefile.common" ; } || { echo "ERROR: I can't figure out how to checkout the 'common' module." ; exit -1 ; } >&2 +endef + +MAKEFILE_COMMON := $(shell $(checkout-makefile-common)) +endif + +include $(MAKEFILE_COMMON) diff --git a/README.md b/README.md index 3212877..a4c99db 100644 --- a/README.md +++ b/README.md @@ -1,3 +1,15 @@ -# smeserver-onlyoffice +# smeserver-onlyoffice -SMEServer Koozali developed git repo for smeserver-onlyoffice smecontribs \ No newline at end of file +SMEServer Koozali developed git repo for smeserver-onlyoffice smecontribs + +## Wiki +
https://wiki.koozali.org/ONLYOFFICE + +## Bugzilla +Show list of outstanding bugs: [here](https://bugs.koozali.org/buglist.cgi?component=smeserver-onlyoffice&product=SME%20Contribs&query_format=advanced&limit=0&bug_status=UNCONFIRMED&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&bug_status=CONFIRMED) + +## Description + +
*This description has been generated by an LLM AI system and cannot be relied on to be fully correct.* +*Once it has been checked, then this comment will be deleted* +
diff --git a/additional/COPYING b/additional/COPYING new file mode 100644 index 0000000..94a9ed0 --- /dev/null +++ b/additional/COPYING @@ -0,0 +1,674 @@ + GNU GENERAL PUBLIC LICENSE + Version 3, 29 June 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU General Public License is a free, copyleft license for +software and other kinds of works. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +the GNU General Public License is intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. We, the Free Software Foundation, use the +GNU General Public License for most of our software; it applies also to +any other work released this way by its authors. You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + To protect your rights, we need to prevent others from denying you +these rights or asking you to surrender the rights. Therefore, you have +certain responsibilities if you distribute copies of the software, or if +you modify it: responsibilities to respect the freedom of others. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must pass on to the recipients the same +freedoms that you received. You must make sure that they, too, receive +or can get the source code. And you must show them these terms so they +know their rights. + + Developers that use the GNU GPL protect your rights with two steps: +(1) assert copyright on the software, and (2) offer you this License +giving you legal permission to copy, distribute and/or modify it. + + For the developers' and authors' protection, the GPL clearly explains +that there is no warranty for this free software. For both users' and +authors' sake, the GPL requires that modified versions be marked as +changed, so that their problems will not be attributed erroneously to +authors of previous versions. + + Some devices are designed to deny users access to install or run +modified versions of the software inside them, although the manufacturer +can do so. This is fundamentally incompatible with the aim of +protecting users' freedom to change the software. The systematic +pattern of such abuse occurs in the area of products for individuals to +use, which is precisely where it is most unacceptable. Therefore, we +have designed this version of the GPL to prohibit the practice for those +products. If such problems arise substantially in other domains, we +stand ready to extend this provision to those domains in future versions +of the GPL, as needed to protect the freedom of users. + + Finally, every program is threatened constantly by software patents. +States should not allow patents to restrict development and use of +software on general-purpose computers, but in those that do, we wish to +avoid the special danger that patents applied to a free program could +make it effectively proprietary. To prevent this, the GPL assures that +patents cannot be used to render the program non-free. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Use with the GNU Affero General Public License. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU Affero General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the special requirements of the GNU Affero General Public License, +section 13, concerning interaction through a network will apply to the +combination as such. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . + +Also add information on how to contact you by electronic and paper mail. + + If the program does terminal interaction, make it output a short +notice like this when it starts in an interactive mode: + + Copyright (C) + This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, your program's commands +might be different; for a GUI interface, you would use an "about box". + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU GPL, see +. + + The GNU General Public License does not permit incorporating your program +into proprietary programs. If your program is a subroutine library, you +may consider it more useful to permit linking proprietary applications with +the library. If this is what you want to do, use the GNU Lesser General +Public License instead of this License. But first, please read +. diff --git a/contriborbase b/contriborbase new file mode 100644 index 0000000..9b7fd51 --- /dev/null +++ b/contriborbase @@ -0,0 +1 @@ +contribs10 diff --git a/createlinks b/createlinks new file mode 100644 index 0000000..3b5575b --- /dev/null +++ b/createlinks @@ -0,0 +1,62 @@ +#!/usr/bin/perl +use strict; +use esmith::Build::CreateLinks qw(:all); + +my $pkg = "smeserver-onlyoffice"; +my $event = "${pkg}-update"; + +event_actions($event, qw( + smeserver-onlyoffice-conf 20 + systemd-default 88 + systemd-reload 89 +)); + +event_templates($event, qw( + /etc/nginx/conf.d/ds.conf + /etc/nginx/includes/http-common.conf + /var/lib/pgsql/data/pg_hba.conf + /etc/rc.d/init.d/masq + /etc/httpd/conf/httpd.conf + /etc/nginx/certificate.crt +)); + +event_services($event, qw( + nginx restart + httpd-e-smith restart + postgresql-13 restart + redis restart + supervisord restart + rabbitmq-server restart + masq restart + ds-docservice restart + ds-metrics restart + ds-converter restart +)); + +#use esmith::Build::Backup qw(:all); +#backup_includes($pkg, qw( )); + + +## add to nextcloud-update event +## add to other events +$event = "ssl-update"; +event_templates($event, qw( + /etc/nginx/conf.d/ds.conf + /etc/nginx/includes/http-common.conf + /etc/nginx/certificate.crt +)); + +event_services($event, qw( + nginx restart +)); + + +$event = "nextcloud-update"; +event_actions($event, qw( + smeserver-onlyoffice-conf 20 +)); + + + + + diff --git a/root/etc/e-smith/db/configuration/defaults/ds-converter/status b/root/etc/e-smith/db/configuration/defaults/ds-converter/status new file mode 100644 index 0000000..86981e6 --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/ds-converter/status @@ -0,0 +1 @@ +enabled diff --git a/root/etc/e-smith/db/configuration/defaults/ds-converter/type b/root/etc/e-smith/db/configuration/defaults/ds-converter/type new file mode 100644 index 0000000..24e1098 --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/ds-converter/type @@ -0,0 +1 @@ +service diff --git a/root/etc/e-smith/db/configuration/defaults/ds-docservice/status b/root/etc/e-smith/db/configuration/defaults/ds-docservice/status new file mode 100644 index 0000000..86981e6 --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/ds-docservice/status @@ -0,0 +1 @@ +enabled diff --git a/root/etc/e-smith/db/configuration/defaults/ds-docservice/type b/root/etc/e-smith/db/configuration/defaults/ds-docservice/type new file mode 100644 index 0000000..24e1098 --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/ds-docservice/type @@ -0,0 +1 @@ +service diff --git a/root/etc/e-smith/db/configuration/defaults/ds-metrics/status b/root/etc/e-smith/db/configuration/defaults/ds-metrics/status new file mode 100644 index 0000000..86981e6 --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/ds-metrics/status @@ -0,0 +1 @@ +enabled diff --git a/root/etc/e-smith/db/configuration/defaults/ds-metrics/type b/root/etc/e-smith/db/configuration/defaults/ds-metrics/type new file mode 100644 index 0000000..24e1098 --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/ds-metrics/type @@ -0,0 +1 @@ +service diff --git a/root/etc/e-smith/db/configuration/defaults/onlyoffice/TCPPort b/root/etc/e-smith/db/configuration/defaults/onlyoffice/TCPPort new file mode 100644 index 0000000..bf3877f --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/onlyoffice/TCPPort @@ -0,0 +1 @@ +8082 diff --git a/root/etc/e-smith/db/configuration/defaults/onlyoffice/access b/root/etc/e-smith/db/configuration/defaults/onlyoffice/access new file mode 100644 index 0000000..4083037 --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/onlyoffice/access @@ -0,0 +1 @@ +local diff --git a/root/etc/e-smith/db/configuration/defaults/onlyoffice/dbname b/root/etc/e-smith/db/configuration/defaults/onlyoffice/dbname new file mode 100644 index 0000000..048d263 --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/onlyoffice/dbname @@ -0,0 +1 @@ +onlyoffice diff --git a/root/etc/e-smith/db/configuration/defaults/onlyoffice/dbuser b/root/etc/e-smith/db/configuration/defaults/onlyoffice/dbuser new file mode 100644 index 0000000..048d263 --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/onlyoffice/dbuser @@ -0,0 +1 @@ +onlyoffice diff --git a/root/etc/e-smith/db/configuration/defaults/onlyoffice/status b/root/etc/e-smith/db/configuration/defaults/onlyoffice/status new file mode 100644 index 0000000..86981e6 --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/onlyoffice/status @@ -0,0 +1 @@ +enabled diff --git a/root/etc/e-smith/db/configuration/defaults/onlyoffice/type b/root/etc/e-smith/db/configuration/defaults/onlyoffice/type new file mode 100644 index 0000000..f92f363 --- /dev/null +++ b/root/etc/e-smith/db/configuration/defaults/onlyoffice/type @@ -0,0 +1 @@ +configuration diff --git a/root/etc/e-smith/db/configuration/migrate/50onlyoffice b/root/etc/e-smith/db/configuration/migrate/50onlyoffice new file mode 100644 index 0000000..9b90082 --- /dev/null +++ b/root/etc/e-smith/db/configuration/migrate/50onlyoffice @@ -0,0 +1,27 @@ +{ + my $onlyoffice = $DB->get('onlyoffice') || $DB->new_record('onlyoffice', {type => 'configuration'}); + my $token = $onlyoffice->prop('token') || ''; + my $secretString = $onlyoffice->prop('secretString') || ''; + # If the management interface is already defined, return nothing + + if ($token eq '') { + # Else, we generate a random password + my $pass=`/usr/bin/openssl rand -base64 32 | tr -c -d '[:alnum:]'`; + $onlyoffice->set_prop('token',"$pass"); + } + + if ($secretString eq '') { + # Else, we generate a random password + my $pass=`/usr/bin/openssl rand -base64 60 | tr -c -d '[:alnum:]'`; + $onlyoffice->set_prop('secretString',"$pass"); + } + + + #dbpass + my $dbpass = $onlyoffice->prop('dbpass') || ''; + if ($dbpass eq '') { + my $pass=`/usr/bin/openssl rand -base64 60 | tr -c -d '[:alnum:]'`; + $onlyoffice->set_prop('dbpass',"$pass"); + } + +} diff --git a/root/etc/e-smith/events/actions/smeserver-onlyoffice-conf b/root/etc/e-smith/events/actions/smeserver-onlyoffice-conf new file mode 100644 index 0000000..2c806cb --- /dev/null +++ b/root/etc/e-smith/events/actions/smeserver-onlyoffice-conf @@ -0,0 +1,165 @@ +#!/bin/bash + +[ -f /etc/nginx/conf.d/onlyoffice-documentserver.conf ] && rm -f /etc/nginx/conf.d/onlyoffice-documentserver.conf +[ -f /etc/nginx/includes/onlyoffice-http.conf ] && rm -f /etc/nginx/includes/onlyoffice-http.conf +[ -e /etc/nginx/includes/ds-example.conf ] && rm -f /etc/nginx/includes/ds-example.conf + +# NB if token less than 32 webtop will fail + +# get fqdn and dshost +export fqdn=$(/sbin/e-smith/config getprop onlyoffice VirtualHost || echo `config get SystemName`.`config get DomainName`) +export dshost=$fqdn +export dsport=$(/sbin/e-smith/config getprop onlyoffice TCPPort || echo "8082") +secretString=$(/sbin/e-smith/config getprop onlyoffice secretString || /usr/bin/openssl rand -base64 60 | tr -c -d '[:alnum:]' ) +fulladdress="$dshost:$dsport" +[ $(/sbin/e-smith/config getprop onlyoffice VirtualHost) ] && fulladdress=$(/sbin/e-smith/config getprop onlyoffice VirtualHost) + +# configure onlyoffice +DIR="/var/www/onlyoffice" +DEFAULT_CONFIG="/etc/onlyoffice/documentserver/default.json" +EXAMPLE_CONFIG="/etc/onlyoffice/documentserver-example/default.json" +SAVED_DEFAULT_CONFIG="$DEFAULT_CONFIG.rpmsave" +PSQL="" +CREATEDB="" +DS_PORT=${DS_PORT:-$dsport} +# DOCSERVICE_PORT=${DOCSERVICE_PORT:-8000} +# SPELLCHECKER_PORT=${SPELLCHECKER_PORT:-8080} +# EXAMPLE_PORT=${EXAMPLE_PORT:-3000} +JWT_ENABLED=${JWT_ENABLED:-true} +JWT_SECRET=${JWT_SECRET:-secret} +JWT_HEADER=${JWT_HEADER:-Authorization} +JWT_SECRET=`/sbin/e-smith/config getprop onlyoffice token` + +# get reject unauthorized ssl config +REJECT_UNAUTHORIZED=`/sbin/e-smith/config getprop onlyoffice RejectUnauthorized || echo "true"` +verify_peer_off="false"; +if [[ "$REJECT_UNAUTHORIZED" == "false" ]]; then verify_peer_off="true"; fi + +# create database if not exist +export PGPASSWORD=`/sbin/e-smith/config getprop onlyoffice dbpass || echo 'onlyoffice'` +PGUSER=`/sbin/e-smith/config getprop onlyoffice dbuser || echo 'onlyoffice'` +PGNAME=`/sbin/e-smith/config getprop onlyoffice dbname || echo 'onlyoffice'` +CONNECTION_PARAMS="-hlocalhost -U$PGUSER -w" +psql="/usr/pgsql-13/bin/psql" +PSQL="$psql -q $CONNECTION_PARAMS" +CREATEDB="createdb -q $CONNECTION_PARAMS" + +su - postgres -c "$psql -lqt | cut -d \| -f 1 | grep -q -w $PGNAME" +if [ $? -eq 1 ]; then # database do not exists + su - postgres -c "$psql -c \"CREATE DATABASE $PGNAME;\"" + su - postgres -c "$psql -c \"CREATE USER $PGUSER WITH password '$PGPASSWORD';\"" + su - postgres -c "$psql -c \"GRANT ALL privileges ON DATABASE $PGNAME TO $PGUSER;\"" +else + su - postgres -c "$psql -c \"ALTER USER $PGUSER WITH password '$PGPASSWORD';\"" +fi + +# check if db works correctly +$PSQL -c ";" >/dev/null 2>&1 || { echo "FAILURE"; exit 1; } + +# db schema +$PSQL -d "$PGNAME" -f "$DIR/documentserver/server/schema/postgresql/createdb.sql" >/dev/null 2>&1 + +# change port 8080 to 48080 for spellchecker to not conflict with tomcat +jq -r ".SpellChecker.server.port = 48080" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG + +# change port 8000 to 48000 for coauth to not conflict with webvirtmgr +jq -r ".services.CoAuthoring.server.port = 48000" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG + +# postgres db settings +jq -r ".services.CoAuthoring.sql.dbHost = \"localhost\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG +jq -r ".services.CoAuthoring.sql.dbName= \"onlyoffice\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG +jq -r ".services.CoAuthoring.sql.dbUser = \"onlyoffice\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG +jq -r ".services.CoAuthoring.sql.dbPass = \"${PGPASSWORD}\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG + +# RabbitMQ +jq -r ".rabbitmq.url = \"amqp://guest:guest@localhost\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG + +# redis +jq -r ".services.CoAuthoring.redis.host = \"localhost\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG + +# enable jwt token for browser, inbox and outbox +jq -r ".services.CoAuthoring.token.enable.browser = ${JWT_ENABLED}" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG +jq -r ".services.CoAuthoring.token.enable.request.inbox = ${JWT_ENABLED}" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG +jq -r ".services.CoAuthoring.token.enable.request.outbox = ${JWT_ENABLED}" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG + +# set secret for session, inbox and outbox +jq -r ".services.CoAuthoring.secret.inbox.string = \"${JWT_SECRET}\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG +jq -r ".services.CoAuthoring.secret.outbox.string = \"${JWT_SECRET}\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG +jq -r ".services.CoAuthoring.secret.session.string = \"${JWT_SECRET}\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG + +# set header, define in JWT_HEADER +jq -r ".services.CoAuthoring.token.inbox.header = \"${JWT_HEADER}\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG +jq -r ".services.CoAuthoring.token.outbox.header = \"${JWT_HEADER}\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG + +# Allow unauthorized SSL if enabled +jq -r ".services.CoAuthoring.requestDefaults.rejectUnauthorized = ${REJECT_UNAUTHORIZED}" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG + +#add very secret string https://forum.onlyoffice.com/t/onlyoffice-7-2-secure-link-secret-error/2806/4 +jq -r ".storage.fs.secretString = \"${secretString}\"" $DEFAULT_CONFIG > temp.json && mv -f temp.json $DEFAULT_CONFIG + +# configure nextcloud +if [ -f /usr/share/nextcloud/occ ]; then # check if nextcloud is installed + # Install onlyoffice app + /usr/bin/occ app:install onlyoffice + + # Set DocumentServerUrl + /usr/bin/occ config:app:set onlyoffice DocumentServerUrl --value="https://$fulladdress/" + + # Set token secret + /usr/bin/occ config:app:set onlyoffice jwt_secret --value="$JWT_SECRET" + + # Enable onlyoffice app + /usr/bin/occ app:enable onlyoffice + + # allow self-signed cert make it conditional + /usr/bin/occ config:app:set onlyoffice verify_peer_off --value="$verify_peer_off" +fi + +# check if webtop5 db is present to add onlyoffice config and restart webtop +su - postgres -c "$psql -lqt | cut -d \| -f 1 | grep -q -w webtop5" +if [ $? -eq 0 ]; then + su - postgres -c "$psql webtop5" <key; + $virtualHostContent = $domain->prop('Content'); + $OUT = ""; +} diff --git a/root/etc/e-smith/templates/etc/httpd/conf/httpd.conf/Onlyoffice/80VirtualHostOnlyoffice b/root/etc/e-smith/templates/etc/httpd/conf/httpd.conf/Onlyoffice/80VirtualHostOnlyoffice new file mode 100644 index 0000000..c964343 --- /dev/null +++ b/root/etc/e-smith/templates/etc/httpd/conf/httpd.conf/Onlyoffice/80VirtualHostOnlyoffice @@ -0,0 +1,66 @@ +{ + +#return "# onlyoffice proxy disabled, no domain set" unless $onlyoffice{'VirtualHost'}; +if (($port eq "80") ){ + $OUT = <<"_EOL"; + # PORT FORWARD FROM 80 TO: 443 + ServerName $onlyoffice{'VirtualHost'} +_EOL + + $OUT .= <<_EOL; + ServerAlias + SSLProxyEngine On + RewriteEngine on + RewriteCond %\{REQUEST_URI\} !^/.well-known/acme-challenge [NC] + RewriteCond %\{HTTPS\} off + RewriteRule ^/(.*) https://%\{HTTP_HOST\}/$1 [NC,R,L] +_EOL + +} +else { + + use esmith::DomainsDB; + my $domains = esmith::DomainsDB->open_ro; + my $ssl_file_crt = $domains->get_prop($virtualHost, "DomainSSLCertificateFile") || "disabled"; + my $ssl_file_key = $domains->get_prop($virtualHost, "DomainSSLCertificateKeyFile") || "disabled"; + my $ssl_file_chain = $domains->get_prop($virtualHost, "DomainSSLCertificateChainFile") || "disabled"; + + + $OUT = <<"_EOL"; + ServerName $onlyoffice{'VirtualHost'} + SSLEngine On + SSLCompression off +_EOL + + $OUT .= " SSLCertificateFile $ssl_file_crt\n" unless $ssl_file_crt eq 'disabled'; + $OUT .= " SSLCertificateChainFile $ssl_file_chain\n" unless $ssl_file_chain eq 'disabled'; + $OUT .= " SSLCertificateKeyFile $ssl_file_key\n" unless ( $ssl_file_key eq 'disabled' || ! -e $ssl_file_chain ); + + $OUT .= <<_EOL; + RewriteEngine on + RewriteRule ^(/)?\$ /welcome/ [NC,R,L] + + SetEnvIf Host "^(.*)\$" THE_HOST=\$1 + #needs apache 2.4.7 + #RequestHeader setifempty X-Forwarded-Proto https + #RequestHeader setifempty X-Forwarded-Host \%{THE_HOST}e + RequestHeader set X-Forwarded-Proto https + RequestHeader set X-Forwarded-Host \%{THE_HOST}e + ProxyAddHeaders Off + + ProxyPass /.well-known/acme-challenge ! +_EOL + + my $OOport = 48000; + $OUT .= <<"_EOL"; + #ProxyPassMatch (.*)(\/websocket)\$ "ws://localhost:$OOport/\$1\$2" + RewriteCond %\{HTTP:Upgrade\} websocket [NC] + RewriteCond %\{HTTP:Connection\} upgrade [NC] + RewriteRule ^/?(.*) "ws://localhost:$OOport/\$1" [P,L] + ProxyPass / "http://localhost:$OOport/" + ProxyPassReverse / "http://localhost:$OOport/" +_EOL + +} + +} diff --git a/root/etc/e-smith/templates/etc/httpd/conf/httpd.conf/Onlyoffice/template-begin b/root/etc/e-smith/templates/etc/httpd/conf/httpd.conf/Onlyoffice/template-begin new file mode 100644 index 0000000..b050035 --- /dev/null +++ b/root/etc/e-smith/templates/etc/httpd/conf/httpd.conf/Onlyoffice/template-begin @@ -0,0 +1,2 @@ + + diff --git a/root/etc/e-smith/templates/etc/httpd/conf/httpd.conf/Onlyoffice/template-end b/root/etc/e-smith/templates/etc/httpd/conf/httpd.conf/Onlyoffice/template-end new file mode 100644 index 0000000..50d3d92 --- /dev/null +++ b/root/etc/e-smith/templates/etc/httpd/conf/httpd.conf/Onlyoffice/template-end @@ -0,0 +1,2 @@ + + diff --git a/root/etc/e-smith/templates/etc/nginx/conf.d/ds.conf/10base b/root/etc/e-smith/templates/etc/nginx/conf.d/ds.conf/10base new file mode 100644 index 0000000..dc681dd --- /dev/null +++ b/root/etc/e-smith/templates/etc/nginx/conf.d/ds.conf/10base @@ -0,0 +1,49 @@ +include /etc/nginx/includes/http-common.conf; + +## HTTPS host +server \{ +{ +$OUT .= " listen 127.0.0.1:8083;\n"; +$OUT .= " listen 0.0.0.0:$onlyoffice{'TCPPort'} ssl;\n"; +$OUT .= " listen [::]:$onlyoffice{'TCPPort'} ssl default_server;\n"; +} + server_tokens off; + root /usr/share/nginx/html; + + ## Strong SSL Security + ## https://raymii.org/s/tutorials/Strong_SSL_Security_On_nginx.html + ssl_certificate /etc/nginx/certificate.crt; + ssl_certificate_key /etc/nginx/certificate.crt; + ssl_verify_client off; + + ssl_ciphers "ECDHE-RSA-AES128-GCM-SHA384:ECDHE-RSA-AES128-GCM-SHA128:DHE-RSA-AES128-GCM-SHA384:DHE-RSA-AES128-GCM-SHA128:ECDHE-RSA-AES128-SHA384:ECDHE-RSA-AES128-SHA128:ECDHE-RSA-AES128-SHA:ECDHE-RSA-AES128-SHA:DHE-RSA-AES128-SHA128:DHE-RSA-AES128-SHA128:DHE-RSA-AES128-SHA:DHE-RSA-AES128-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES128-GCM-SHA384:AES128-GCM-SHA128:AES128-SHA128:AES128-SHA128:AES128-SHA:AES128-SHA:DES-CBC3-SHA:HIGH:!aNULL:!eNULL:!EXPORT:!DES:!MD5:!PSK:!RC4"; + + ssl_protocols TLSv1 TLSv1.1 TLSv1.2; + ssl_session_cache builtin:1000 shared:SSL:10m; + + ssl_prefer_server_ciphers on; + + add_header Strict-Transport-Security max-age=31536000; + # add_header X-Frame-Options SAMEORIGIN; + add_header X-Content-Type-Options nosniff; + + ## [Optional] If your certficate has OCSP, enable OCSP stapling to reduce the overhead and latency of running SSL. + ## Replace with your ssl_trusted_certificate. For more info see: + ## - https://medium.com/devops-programming/4445f4862461 + ## - https://www.ruby-forum.com/topic/4419319 + ## - https://www.digitalocean.com/community/tutorials/how-to-configure-ocsp-stapling-on-apache-and-nginx + # ssl_stapling on; + # ssl_stapling_verify on; + # ssl_trusted_certificate /etc/nginx/ssl/stapling.trusted.crt; + # resolver 208.67.222.222 208.67.222.220 valid=300s; # Can change to your DNS resolver if desired + # resolver_timeout 10s; + + ## [Optional] Generate a stronger DHE parameter: + ## cd /etc/ssl/certs + ## sudo openssl dhparam -out dhparam.pem 4096 + ## + # ssl_dhparam /etc/ssl/certs/dhparam.pem; + set $secure_link_secret { $onlyoffice{'secretString'} || "how-to-configure-ocsp-stapling-on-apache" }; + include /etc/nginx/includes/ds-*.conf; + +\} diff --git a/root/etc/e-smith/templates/etc/nginx/includes/http-common.conf/10base b/root/etc/e-smith/templates/etc/nginx/includes/http-common.conf/10base new file mode 100644 index 0000000..19e3435 --- /dev/null +++ b/root/etc/e-smith/templates/etc/nginx/includes/http-common.conf/10base @@ -0,0 +1,38 @@ +upstream docservice \{ + server localhost:48000; +\} + +upstream spellchecker \{ + server localhost:48080; +\} + +upstream example \{ + server localhost:3000; +\} + +map $http_host $this_host \{ + "" $host; + default $http_host; +\} + +map $http_x_forwarded_proto $the_scheme \{ + default $http_x_forwarded_proto; + "" $scheme; +\} + +map $http_x_forwarded_host $the_host \{ + default $http_x_forwarded_host; + "" $this_host; +\} + +map $http_upgrade $proxy_connection \{ + default upgrade; + "" close; +\} + +proxy_set_header Host $http_host; +proxy_set_header Upgrade $http_upgrade; +proxy_set_header Connection $proxy_connection; +proxy_set_header X-Forwarded-Host $the_host; +proxy_set_header X-Forwarded-Proto $the_scheme; +proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; diff --git a/root/etc/e-smith/templates/var/lib/pgsql/data/pg_hba.conf/15onlyoffice b/root/etc/e-smith/templates/var/lib/pgsql/data/pg_hba.conf/15onlyoffice new file mode 100644 index 0000000..09ba345 --- /dev/null +++ b/root/etc/e-smith/templates/var/lib/pgsql/data/pg_hba.conf/15onlyoffice @@ -0,0 +1,2 @@ +host all all 127.0.0.1/32 trust +host all all ::1/128 trust diff --git a/root/usr/lib/systemd/system/ds-converter.service.d/51koozali.conf b/root/usr/lib/systemd/system/ds-converter.service.d/51koozali.conf new file mode 100644 index 0000000..e7a9ef4 --- /dev/null +++ b/root/usr/lib/systemd/system/ds-converter.service.d/51koozali.conf @@ -0,0 +1,6 @@ +[Unit] +After=network-online.target + +[Install] +WantedBy=sme-server.target + diff --git a/root/usr/lib/systemd/system/ds-docservice.service.d/51koozali.conf b/root/usr/lib/systemd/system/ds-docservice.service.d/51koozali.conf new file mode 100644 index 0000000..e7a9ef4 --- /dev/null +++ b/root/usr/lib/systemd/system/ds-docservice.service.d/51koozali.conf @@ -0,0 +1,6 @@ +[Unit] +After=network-online.target + +[Install] +WantedBy=sme-server.target + diff --git a/root/usr/lib/systemd/system/ds-metrics.service.d/51koozali.conf b/root/usr/lib/systemd/system/ds-metrics.service.d/51koozali.conf new file mode 100644 index 0000000..e7a9ef4 --- /dev/null +++ b/root/usr/lib/systemd/system/ds-metrics.service.d/51koozali.conf @@ -0,0 +1,6 @@ +[Unit] +After=network-online.target + +[Install] +WantedBy=sme-server.target + diff --git a/smeserver-onlyoffice.spec b/smeserver-onlyoffice.spec new file mode 100644 index 0000000..7313c97 --- /dev/null +++ b/smeserver-onlyoffice.spec @@ -0,0 +1,115 @@ +Name: smeserver-onlyoffice +Version: 0.0.5 +Release: 9%{?dist} +Summary: Onlyoffice document server for Koozali SME Server +License: GPL +Source0: %{name}-%{version}.tar.gz + +BuildArch: noarch +BuildRequires: e-smith-devtools +Requires: smeserver-postgresql,smeserver-redis,smeserver-nginx +Requires: postgresql +Requires: onlyoffice-documentserver >= 7.3.0 +Requires: rabbitmq-server,supervisor, php73-php-cli +Requires: smeserver-supervisor, smeserver-rabbitmq-server, jq +# for msttcore-fonts-installer +Requires: cabextract + +%description +Onlyoffice document server for for Koozali SME Server, a web based document editor server + +%prep +%setup -q + +%build +perl createlinks + +%install +rm -rf %{buildroot} +(cd root ; find . -depth -print | cpio -dump %{buildroot}) +/sbin/e-smith/genfilelist %{buildroot} \ + --ignoredir /etc/yum/post-actions \ + --ignoredir /usr/lib/systemd/system/nginx.service.d \ + > %{name}-%{version}-%{release}-filelist + + +%files -f %{name}-%{version}-%{release}-filelist +%defattr(-,root,root) + + +%changelog +* Sat Sep 07 2024 cvs2git.sh aka Brian Read 0.0.5-9.sme +- Roll up patches and move to git repo [SME: 12338] + +* Sat Sep 07 2024 BogusDateBot +- Eliminated rpmbuild "bogus date" warnings due to inconsistent weekday, + by assuming the date is correct and changing the weekday. + +* Wed Feb 08 2023 Jean-Philippe Pialasse 0.0.5-8.sme +- adapt for onlyoffice 7.3 with systemd services [SME: 12177] + +* Tue Feb 07 2023 Jean-Philippe Pialasse 0.0.5-7.sme +- requires documentserver < 7.3 as using supervisord +- fix path to pgsql [SME: 12317] +- redirect to welcome uri + +* Mon Dec 26 2022 Jean-Philippe Pialasse 0.0.5-5.sme +- fix httpd failure on onlyoffice-documentserver rpm update [SME: 12289] + +* Tue Nov 22 2022 Jean-Philippe Pialasse 0.0.5-4.sme +- fix path to postgresql-13 [SME: 12238] + +* Mon Nov 21 2022 Jean-Philippe Pialasse 0.0.5-3.sme +- fix nginx not starting with onlyoffice 7.2 [SME: 12234] + +* Sun Nov 20 2022 Jean-Philippe Pialasse 0.0.5-2.sme +- fix wrong dsport in httpd template [SME: 12233] + +* Thu Jun 23 2022 Jean-Philippe Pialasse 0.0.5-1.sme +- Initial import to Koozali SME Server from Nethserver +- Eliminated rpmbuild "bogus date" warnings due to inconsistent weekday, + by assuming the date is correct and changing the weekday. + Wed Sep 28 2019 --> Wed Sep 25 2019 or Sat Sep 28 2019 or Wed Oct 02 2019 or .... + +* Tue Sep 07 2021 Markus Neuberger - 0.0.2-1 +- Fix Nextcloud configuration - thanks to Roberto Schiano + +* Fri Apr 17 2020 Markus Neuberger - 0.0.1-9 +- Use jq instead of npm json - thanks to Klaus Boehme +- Fix php memory error + +* Sat Sep 28 2019 Markus Neuberger - 0.0.1-8 + Wed Sep 28 2019 --> Wed Sep 25 2019 or Sat Sep 28 2019 or Wed Oct 02 2019 or .... +- Add stronger password for working with Webtop - thanks to Klaus Boehme +- Add Webtop support + +* Wed Sep 04 2019 Markus Neuberger - 0.0.1-7 +- Change config file and user + +* Wed Nov 07 2018 Markus Neuberger - 0.0.1-6 +- Change config file owner to work with versions newer than 5.2 - thanks to giacomo + +* Fri Sep 21 2018 Markus Neuberger - 0.0.1-4 +- add RejectUnauthorized prop to make it work with self-signed certs +- remove rabbitmq-server requirement +- change spellchecker port 8080 to 48080 to not conflict with nethserver-tomcat + +* Sat Apr 07 2018 Markus Neuberger - 0.0.1-3 +- check if database exists - thanks to @dnutan +- check if nextcloud exists - thanks to @dnutan +- tidy up conf action +- remove documentserver script +- make documentserver updates possible +- use json import instead of templating defaults.json +- remove install errors - thanks to @dnutan + +* Tue Mar 20 2018 Markus Neuberger - 0.0.1-2 +- Secure access via JWT token - thanks to @dnutan +- autoinstall of onlyoffice nextcloud app - thanks to @danb35 +- allow self-signed cert - thanks to @flatspin +- add host db prop + +* Sat Mar 10 2018 Markus Neuberger - 0.0.1-1 +- First release +- Add requires +- Setup documentserver and nginx