smeserver-gitutils/github-make-push-mirror.sh

#!/bin/bash
#
# $1 = Module name e.g. smeserver-ddclient (assumes github repo is to be called the same)
# $2 = gitea Organisation (smeserver or smecontrib)
# $3 = github Organisation (Koozali-SME-Server or Koozali-SME-Server-contribs or smeserver)
#

# Make this null to get curl to check ssl cert
checkSSL="-k"
# and -v for curl verbose mode
SILENT4CURL="-s" 

if [ "$#" -ne 3 ]; then
	echo "Error: github-make-push-mirror.sh <modulename> <organization> <github orgamisation>"
	exit 0
fi

# Check that jq is installed
if command -v jq -V > /dev/null; then
    if [ $DEBUG ] ; then echo "Jq is installed" ; fi
else
    echo "Error: jq is not installed (try EPEL)"
    exit 1
fi

#check gh is loaded
if command -v gh --version > /dev/null; then
    if [ $DEBUG ] ; then echo "gh is installed" ; fi
else
    echo "Error: gh is not installed **************"
    echo "try: curl -fsSL https://cli.github.com/packages/rpm/gh-cli.repo | sudo tee /etc/yum.repos.d/github-cli.repo"
    echo "then:sudo dnf -y install gh"
    exit 1
fi

#
# Pull in parameters from a config file ~/.smegit/config
#
inifilename=$(echo ~)"/.smegit/config"
if [ ! -e $inifilename ] ; then
  # Not here, look at system default
  if [ ! -e /etc/smegit.ini ] ; then 
    echo "No ini file found $inifiename or /etc/smegit.ini"
    exit 1
  else
    initfilename="/etc/smegit.ini"
  fi
fi 

while read -r line || [[ -n "$line" ]]; do
    if [[ $line =~ ^\[.*\]$ ]]
    then
        section=${line#*[}
        section=${section%]*}
    else
        if [[ $line =~ ^[^#]*= ]]
        then
            key=${line%=*}
            value=${line#*=}
            declare "${section}_${key}=$value"
        fi
    fi
done < "$inifilename"

GITEAUser=${remote_USER}
GITEAACCESSTOKEN=${remote_GITEAACCESSTOKEN}
GITEAHOST=${remote_GITEAHOST}

#First check repo name exists in gitea
REPO_NAME=$1
RESPONSE=$(curl $checkSSL $SILENT4CURL -o /dev/null -w "%{http_code}" "$GITEAHOST/api/v1/repos/$2/$REPO_NAME")
if [ "$RESPONSE" == "200" ]; then
   echo "$2/$1 exists in GITEA"
else
   echo "Error: $2/$1 does not exists in GITEA"
   exit 1
fi

# and that the github token has been installed in the .smegit file
# Note that this personal access token is generated by github against a particular login
GITHUBLOGIN=${remote_GITHUBLOGIN}
if [ -z "${remote_GITHUBTOKEN}" ]; then
  echo "Error: The GITHUBTOKEN is not defined in .smegit/config ."
fi

#and check that github is logged in
if ! gh auth status > /dev/null 2>&1; then
  echo "You must log in with GitHub CLI first."
  echo "Run 'gh auth login' and follow the instructions."
  exit 1
fi

# first create repo on github or skip over if already created
REPO_NAME=$3/$1
DESCRIPTION="Repo-$1 - push mirror from Koozali gitea repo $1"

# Create the repository

# Check if the repository exists
repo_exists=$(gh repo view "$REPO_NAME" > /dev/null 2>&1)

if [ $? -eq 0 ]; then
  echo "The repository '$REPO_NAME' already exists."
else
	echo "Creating GitHub repository '$REPO_NAME'..."
	gh repo create "$REPO_NAME" --description "$DESCRIPTION" --public
	if [ $? -eq 0 ]; then
	  echo "GitHub Repository '$REPO_NAME' created successfully."
	else
	  echo "Failed to create repository '$REPO_NAME'."
	  exit 1
	fi
fi

# Now update the equivalent gitea repo to push to the github one.
GITHUB_REPO_URL="https://github.com/$3/$1.git"

# API endpoint to create a push mirror
API_ENDPOINT="${remote_GITEAHOST}/api/v1/repos/${2}/${1}/push_mirrors"

# See if the push mirror exists already
# Fetch repository mirror settings using the Gitea API
response=$(curl $checkSSL $SILENT4CURL -s -H "Authorization: token ${remote_GITEAACCESSTOKEN}" \
  "$API_ENDPOINT")

if [ -z "$response" ]; then
	echo "Failed to fetch mirror settings from Gitea."
	exit 1
fi

# Check if there are any push mirrors
push_mirrors=$(echo "$response" | jq -r '.[] | select(.sync_on_commit == true)')

if [ -z "$push_mirrors" ]; then
	echo "No push mirror configurations found for the repository '$2/$1'."
else
	echo "Push mirror configurations found for the repository '$2/$1:"
	#echo "$push_mirrors" | jq
fi

# check if one of them is the one to github
github_mirror=$(echo "$response" | jq -r --arg address "${GITHUB_REPO_URL}" '.[] | select(.remote_address == $address)')
if [ -z "$github_mirror" ]; then
	echo "No push mirror configuration with remote address '${GITHUB_REPO_URL}' found for the repository '$REPO_NAME'."
else
	echo "Push mirror configuration with remote address '${GITHUB_REPO_URL}' found for the repository '$REPO_NAME':"
	echo "$github_mirror" | jq
	remote_name=$(echo "$github_mirror" | jq -r '.remote_name')
	echo "Deleting this push mirror entry with remote_name: $remote_name"
	# Delete the mirror using the mirror ID
	delete_response=$(curl $checkSSL $SILENT4CURL -s -X DELETE -H "Authorization: token ${remote_GITEAACCESSTOKEN}" \
	"$API_ENDPOINT/$remote_name")
	if [ -z "$delete_response" ]; then
	  echo "Successfully deleted the mirror with remote name '$remote_name'."
	else
	  echo "Failed to delete the mirror with remote name '$remote_name'. Response: $delete_response"
	fi 
fi

# JSON payload to be sent to the Gitea API to create the push mirrir
MIRROR_PAYLOAD=$(cat <<EOF
{
  "interval" : "8h0m0s",
  "remote_address": "${GITHUB_REPO_URL}",
  "remote_username": "${GITHUBLOGIN}",
  "remote_password": "${remote_GITHUBTOKEN}",
  "sync_on_commit" : true
}
EOF
)

# Create the push mirror
response=$(curl $checkSSL $SILENT4CURL -s -w "\nHTTP_STATUS_CODE:%{http_code}" -X POST "$API_ENDPOINT" \
  -H "Authorization: token ${remote_GITEAACCESSTOKEN}" \
  -H "Content-Type: application/json" \
  -d "$MIRROR_PAYLOAD")

# Extract the response and HTTP status code
echo "Creating the push mirror for $2/$1 to $3/$1"
body=$(echo "$response" | sed -n '1,/HTTP_STATUS_CODE:/p' | sed '$d')
status_code=$(echo "$response" | grep "HTTP_STATUS_CODE:" | awk -F ':' '{print $2}')

# Evaluate the response
if [[ "$status_code" -ge 200 && "$status_code" -lt 300 ]]; then
  echo "Successfully set up push mirror from Gitea repository to GitHub for $2/$1 to $3/$1."
else
  echo "Failed to set up push mirror. HTTP Status Code: $status_code"
  echo "Response: $body"
  exit 1
fi

exit 0