From 08b75a7b93d38cb1ba58aba446a186284f74befc Mon Sep 17 00:00:00 2001
From: Trevor Batley <trevor@batley.id.au>
Date: Tue, 9 May 2023 17:46:24 +1000
Subject: [PATCH] take out dangerous 'rm RF's

---
 git-cvs2git.sh | 149 +++++++++++++++++++++++++++++--------------------
 1 file changed, 88 insertions(+), 61 deletions(-)

diff --git a/git-cvs2git.sh b/git-cvs2git.sh
index 7153fc0..6217ad1 100755
--- a/git-cvs2git.sh
+++ b/git-cvs2git.sh
@@ -29,7 +29,6 @@ if [ ! -e $inifilename ] ; then
   echo "ERROR*******No ini file found $inifilename"
   exit 1
 fi 
-echo "************found ini file: $inifilename"
 
 while read -r line || [[ -n "$line" ]]; do
     if [[ $line =~ ^\[.*\]$ ]]
@@ -48,9 +47,14 @@ done < "$inifilename"
 DEBUG=false
 if [ ${smegit_DEBUG} == "true" ] ; then DEBUG=true ; fi
 
+if [ $DEBUG ] ; then echo "************found ini file: $inifilename" ; fi
 # Make this null if you want lots of output. Still quite a bit anyway
 QUIET="-q"
-if [ $DEBUG ] ; then QUIET=null ; fi
+curlsilent="-s"
+if [ $DEBUG ] ; then 
+	QUIET=
+	curlsilent=
+fi
 # Make this null to get curl to check ssl cert
 checkSSL="-k"
 
@@ -86,7 +90,7 @@ mkdir -p $CVSFiles
 
 # Check that git-lfs is installed
 if command -v git-lfs > /dev/null; then
-    echo "************Git LFS is installed"
+    if [ $DEBUG ] ; then echo "************Git LFS is installed" ; fi
 else
     echo "ERROR********************** Git LFS is not installed ******************"
     exit 1
@@ -94,7 +98,7 @@ fi
 
 # Check that jq is installed
 if command -v jq -V > /dev/null; then
-    echo "************Jq is installed"
+    if [ $DEBUG ] ; then echo "************Jq is installed" ; fi
 else
     echo "ERROR********************** jq is not installed (try EPEL)**************"
     exit 1
@@ -103,14 +107,14 @@ fi
 # and check for the special scripts - changelog and BogusDateBot.sh - I think these are available in the
 # mockbuild rpm, but beware Bug:12340 - changelog needs an edit to work!
 if type -P change-log >/dev/null 2>&1; then
-  echo "************change-log is installed"
+  if [ $DEBUG ] ; then echo "************change-log is installed" ; fi
 else
   echo "ERROR********************change-log is not installed*********** (try installing smeserver-mockbuild)"
 fi
-echo "************..and also note bug:12340".
+if [ $DEBUG ] ; then echo "************..and also note bug:12340" ; fi
 
 if type -P BogusDateBot.sh >/dev/null 2>&1; then
-  echo "************BogusDateBot.sh is installed"
+  if [ $DEBUG ] ; then echo "************BogusDateBot.sh is installed"; fi
 else
   echo "ERROR********************BogusDateBot.sh is not installed*********** (try installing smeserver-mockbuild)"
 fi
@@ -126,8 +130,16 @@ cd $CVSFiles
 # First delete any existing module directory tree
 # if there at all 
 if [ -d "$1" ] ; then
-   echo "************Deleting local CVS files"
-   rm -Rf $1
+   if [ $DEBUG ] ; then echo "************Deleting local CVS files" ; fi
+   cd $CVSFiles/$1
+   # Delete all files, links and directories
+   find . -maxdepth 999 -xtype l -delete 
+   find . -maxdepth 999 -type f -delete 
+   # we seem to need this as well 
+   find . -xtype l -exec rm -f {} +
+   find . -maxdepth 999 -type d -delete 
+   cd $CVSFiles
+#	rm -Rf $1
 fi
 
 
@@ -195,8 +207,16 @@ cd $GITFiles
 
 # Delete the local first
 if [ -d "$1" ] ; then
-	echo "************Deleting local GIT files"
-	rm -Rf $1
+	if [ $DEBUG ] ; then echo "************Deleting local GIT files" ; fi
+	cd $GITFiles/$1
+	find . -maxdepth 999 -xtype l -delete 
+	find . -maxdepth 999 -type f -delete 
+	# we seem to need this as well 
+	find . -xtype l -exec rm -f {} +
+	find . -maxdepth 999 -type d -delete 
+	cd $GITFiles
+	rmdir $1
+#	rm -Rf $1
 fi
 
 
@@ -204,7 +224,7 @@ fi
 REPO_NAME=$1
 RESPONSE=$(curl "$checkSSL" -s -o /dev/null -w "%{http_code}" "$GITEAHOST/api/v1/repos/$ORGGITEA/$REPO_NAME")
 if [ "$RESPONSE" == "200" ]; then
-    echo "************Repository for $1 already exists!"
+    if [ $DEBUG ] ; then echo "************Repository for $1 already exists!" ; fi
 	# If so, clone it (just want the README.md)
 	# And Clone it
 	cd $GITFiles
@@ -212,7 +232,7 @@ if [ "$RESPONSE" == "200" ]; then
 	#GIT_SSL_NO_VERIFY=true git clone "$GITEAHOST/$ORGGITEA/$1.git" 
     NOREPO=0
 else
-    echo "************Repository for $1 does not exist."
+    if [ $DEBUG ] ; then echo "************Repository for $1 does not exist." ; fi
     NOREPO=1
 fi
 
@@ -227,11 +247,18 @@ if [ -d "$1" ] ; then
 		READMECONTENTS=`mktemp`
 		mv -f README.md "$READMECONTENTS"
 	fi
-	echo "************Saved README: $READMECONTENTS"
+	if [ $DEBUG ] ; then echo "************Saved README: $READMECONTENTS" ; fi
 	cd $GITFiles
 	# Delete all files, links and directories
-	echo "************Deleting local GIT files"
-	rm -Rf $1
+	if [ $DEBUG ] ; then echo "************Deleting local GIT files" ; fi
+	find . -maxdepth 999 -xtype l -delete 
+	find . -maxdepth 999 -type f -delete 
+	# we seem to need this as well 
+	find . -xtype l -exec rm -f {} +
+	find . -maxdepth 999 -type d -delete 
+	cd $GITFiles
+	rmdir $1
+#	rm -Rf $1
 fi
 
 
@@ -239,18 +266,18 @@ cd $GITFiles
 #git init $QUIET $1
 
 # Now delete the remote repo and re-create it and clone it in to local
-curl "$checkSSL" -X  'DELETE' \
+curl "$checkSSL" "$curlsilent" -X  'DELETE' \
 	"$GITEAHOST/api/v1/repos/$ORGGITEA/$1" \
 	-H 'accept: application/json' \
 	-H "Authorization: token $GITEAACCESSTOKEN"
 	
 # and check if it is here.
-RESPONSE=$(curl -s -o /dev/null -w "%{http_code}" "$GITEAHOST/api/v1/repos/$ORGGITEA/$1")
+RESPONSE=$(curl $curlsilent -o /dev/null -w "%{http_code}" "$GITEAHOST/api/v1/repos/$ORGGITEA/$1")
 if [ "$RESPONSE" == "200" ]; then
-    echo "************Repository for $1 exists!"
+    if [ $DEBUG ] ; then echo "************Repository for $1 exists!" ; fi
     GOTREPO=0
 else
-    echo "************Repository for $1 does not exist"
+    if [ $DEBUG ] ; then echo "************Repository for $1 does not exist" ; fi
     GOTREPO=1
 fi
 
@@ -264,11 +291,11 @@ fi
 #
 # Use the API interface to create the remote repo
 #
-echo "************Creating repo for $1 $PACKAGETYPE"
+if [ $DEBUG ] ; then echo "************Creating repo for $1 $PACKAGETYPE" ; fi
 
 if [[ $GOTREPO -eq 1 ]] ; then 
 	#Create it if it does not exist
-	JSONREPO=$(curl "$checkSSL" -X 'POST'   "$GITEAHOST/api/v1/orgs/$ORGGITEA/repos"   \
+	JSONREPO=$(curl "$checkSSL" "$curlsilent" -X 'POST'   "$GITEAHOST/api/v1/orgs/$ORGGITEA/repos"   \
 	-H 'accept: application/json'   \
 	-H "Authorization: token $GITEAACCESSTOKEN" \
 	-H 'Content-Type: application/json'   \
@@ -286,12 +313,12 @@ if [[ $GOTREPO -eq 1 ]] ; then
 			"trust_model": "Default Trust Model"
 	}')
 	
-	echo $JSONREPO
+	if [ $DEBUG ] ; then echo $JSONREPO ; fi
 
 	# and extract the http URL for it
 	HTTP_URL=`echo $JSONREPO | jq -r '.html_url'`
 
-	echo $HTTP_URL
+	if [ $DEBUG ] ; then echo $HTTP_URL ; fi
 
 	if [[ -z "${HTTP_URL}"  ]]; then
 	  echo "ERROR*******Repo for $1 appears NOT to have been created "
@@ -307,7 +334,7 @@ fi
 # And check it now exists
 RESPONSE=$(curl -s -o /dev/null -w "%{http_code}" "$GITEAHOST/api/v1/repos/$ORGGITEA/$1")
 if [ "$RESPONSE" == "200" ]; then
-    echo "************Repository for $1 exists"
+    if [ $DEBUG ] ; then echo "************Repository for $1 exists" ; fi
 else
     echo "ERROR*******Repository for $1 has not been created ($JSONREQ)"
     exit 1
@@ -342,19 +369,19 @@ EXT=$(cat "$(basename $SPECFILE)" | grep -i ^Source | head -n 1 | sed -r 's/^[S|
 ARCHIVEFILE=$(cat "$(basename $SPECFILE)" | grep ^Source | head -n 1 | sed -r 's/^[S|s]ource[0..9]?:\s?//' | xargs basename)
 ARCHIVEFILE=$(rpm --queryformat "$ARCHIVEFILE\n" --specfile "$(basename $SPECFILE)" | head -n 1)
 
-#echo $ARCHIVEFILE $EXT $SPECFILE
+if [ $DEBUG ] ; then echo $ARCHIVEFILE $EXT $SPECFILE ; fi
 
 # Check that we got the filename (possible define in it not expanded?)
 if [ ! -f $ARCHIVEFILE ]; then
 	# Try another tack
-	echo "************File $ARCHIVE does not exist - trying *.$EXT"
+	if [ $DEBUG ] ; then echo "************File $ARCHIVE does not exist - trying *.$EXT" ; fi
 	ARCHIVEFILE=`ls *.$EXT | head -n 1`
 	if [ ! -f $ARCHIVEFILE || -z $ARCHIVEFILE ]; then
 		echo "ERROR*******Can't identify archive file $ARCHIVEFILE $EXT `pwd`"
 		exit 1
 	fi
 fi
-echo "************TreePATH:$TREEPATH and Archivefile:$ARCHIVEFILE `pwd`"
+if [ $DEBUG ] ; then echo "************TreePATH:$TREEPATH and Archivefile:$ARCHIVEFILE `pwd`" ; fi
 
 # pull in all the files we want
 cd $GITFiles/$1
@@ -380,7 +407,7 @@ done
 # and see if the spec file is not according to specification of <packagename>.spec
 # if not rename it
 if [[ $SPECFILE != $ORIGSPECFILE ]] ; then
-   echo "************Renaming specfile from $(basename $SPECFILE) $(basename $ORIGSPECFILE)"
+   if [ $DEBUG ] ; then echo "************Renaming specfile from $(basename $SPECFILE) $(basename $ORIGSPECFILE)" ; fi
    mv "$(basename $SPECFILE)" "$(basename $ORIGSPECFILE)"
    SPECFILE=$ORIGSPECFILE
 fi
@@ -390,19 +417,19 @@ if [[ ! "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
 	# add in the patches (a 3rd party package)
 	# it turns out that not all patches end in .patch, so extract the file names out of the spec file as per sources below
 	PATCHS=$(grep -i -E '^patch[0-9]*:' $(basename $SPECFILE) | cut -d: -f2- | sed 's/ //g')
-	echo "$PATCHS"
+	if [ $DEBUG ] ; then echo "$PATCHS" ; fi
 
 	for fpath in $PATCHS; do
 		# Needs another step incase the extraction from the spec file contains spec variables
 		fpathfile=$(basename $fpath)
-		echo "$fpathfile"
+		if [ $DEBUG ] ; then echo "$fpathfile" ; fi
 		translatefpath=$(rpm --queryformat "$fpathfile\n" --specfile $(basename $SPECFILE) | head -n 1)
-		echo "$translatefpath"
+		if [ $DEBUG ] ; then echo "$translatefpath" ; fi
 		if [[ -f $CVSFiles/$1/$BASEORCONTRIB/$translatefpath ]] ; then 	
-			echo "************Copying $CVSFiles/$1/$BASEORCONTRIB/$translatefpath";
+			if [ $DEBUG ] ; then echo "************Copying $CVSFiles/$1/$BASEORCONTRIB/$translatefpath" ; fi
 			cp $CVSFiles/$1/$BASEORCONTRIB/$translatefpath . 
 		else
-			echo "************Not found $CVSFiles/$1/$BASEORCONTRIB/$translatefpath ( $fpathfile )- so not copied"
+			if [ $DEBUG ] ; then echo "************Not found $CVSFiles/$1/$BASEORCONTRIB/$translatefpath ( $fpathfile )- so not copied" ; fi
 		fi
 	done
 
@@ -416,33 +443,33 @@ if [[ ! "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
 	# if the spec file includes "BuildRequires:  perl(ExtUtils::MakeMaker)" and NOT "BuildRequires:  perl(ExtUtils::Manifest)" then add the latter
 	if grep -q "^BuildRequires:.*perl(ExtUtils::MakeMaker)" "$(basename $SPECFILE)" && ! grep -q "^BuildRequires:.*perl(ExtUtils::Manifest)" "$(basename $SPECFILE)"; then
 		sed -i '/^BuildRequires:.*perl(ExtUtils::MakeMaker)/a BuildRequires: perl(ExtUtils::Manifest)' "$(basename $SPECFILE)"
-		echo "************Added 'BuildRequires: perl(ExtUtils::Manifest)' to the spec file."
+		if [ $DEBUG ] ; then echo "************Added 'BuildRequires: perl(ExtUtils::Manifest)' to the spec file." ; fi
 	else
-		echo  "************No action was taken. The spec file either does not include 'BuildRequires: perl(ExtUtils::MakeMaker)' or already includes 'BuildRequires: perl(ExtUtils::Manifest)'."
+		if [ $DEBUG ] ; then echo  "************No action was taken. The spec file either does not include 'BuildRequires: perl(ExtUtils::MakeMaker)' or already includes 'BuildRequires: perl(ExtUtils::Manifest)'." ; fi
 	fi
 	
 	# and similar for another ExtUtils package - ParseXS
 	if grep -q "^BuildRequires:.*perl(ExtUtils::MakeMaker)" "$(basename $SPECFILE)" && ! grep -q "^BuildRequires:.*perl(ExtUtils::ParseXS)" "$(basename $SPECFILE)"; then
 		sed -i '/^BuildRequires:.*perl(ExtUtils::MakeMaker)/a BuildRequires: perl(ExtUtils::ParseXS)' "$(basename $SPECFILE)"
-		echo "************Added 'BuildRequires: perl(ExtUtils::ParseXS)' to the spec file."
+		if [ $DEBUG ] ; then echo "************Added 'BuildRequires: perl(ExtUtils::ParseXS)' to the spec file." ; fi
 	else
-		echo  "************No action was taken. The spec file either does not include 'BuildRequires: perl(ExtUtils::MakeMaker)' or already includes 'BuildRequires: perl(ExtUtils::ParseXS)'."
+		if [ $DEBUG ] ; then echo  "************No action was taken. The spec file either does not include 'BuildRequires: perl(ExtUtils::MakeMaker)' or already includes 'BuildRequires: perl(ExtUtils::ParseXS)'." ; fi
 	fi
 	
 	# and similar for another devel package - needs manifest 
 	if grep -q "^BuildRequires:.*perl-devel" "$(basename $SPECFILE)" && ! grep -q "^BuildRequires:.*perl(ExtUtils::Manifest)" "$(basename $SPECFILE)"; then
 		sed -i '/^BuildRequires:.*perl-devel/a BuildRequires:  perl(ExtUtils::Manifest)' "$(basename $SPECFILE)"
-		echo "************Added 'BuildRequires: perl(ExtUtils::Manifest)' to the spec file."
+		if [ $DEBUG ] ; then echo "************Added 'BuildRequires: perl(ExtUtils::Manifest)' to the spec file." ; fi
 	else
-		echo  "************No action was taken. The spec file either does not include 'BuildRequires: perl-devel' or already includes 'BuildRequires:  perl(ExtUtils::Manifest)'."
+		if [ $DEBUG ] ; then echo  "************No action was taken. The spec file either does not include 'BuildRequires: perl-devel' or already includes 'BuildRequires:  perl(ExtUtils::Manifest)'." ; fi
 	fi
 	
 	# Fix the rm in the pear packages - .filemap is no longer part of the download
 	if grep -q "^rm %{buildroot}/%{peardir}/.filemap" "$(basename $SPECFILE)"; then
 		sed -i 's/^rm *\%/rm -rf %/' "$(basename $SPECFILE)"
-		echo "************Added 'rm -rf %{buildroot}/%{peardir}/.filemap' to the spec file."
+		if [ $DEBUG ] ; then echo "************Added 'rm -rf %{buildroot}/%{peardir}/.filemap' to the spec file." ; fi
 	else
-		echo  "************No action was taken. The spec file either does not include 'rm %{buildroot}/%{peardir}/.filemap' or already includes it"
+		if [ $DEBUG ] ; then echo  "************No action was taken. The spec file either does not include 'rm %{buildroot}/%{peardir}/.filemap' or already includes it" ; fi
 	fi
 
 	
@@ -450,20 +477,20 @@ fi
 
 ## and there may be extra files that maybe needed, these can be identified from the "Source" spec in the .spec files
 SOURCES=$(grep -i -E '^Source[0-9]*:' $(basename $SPECFILE) | cut -d: -f2- | sed 's/ //g')
-echo "$SOURCES"
+if [ $DEBUG ] ; then echo "$SOURCES" ; fi
 
 #SOURCE=$(rpm --queryformat '$SOURCE\n' --specfile $SPECFILE | head -n 1)
 for fpath in $SOURCES; do
 	# Needs another step incase the extraction from the spec file contains spec variables
 	fpathfile=$(basename $fpath)
-	echo "$fpathfile"
+	if [ $DEBUG ] ; then echo "$fpathfile" ; fi
 	translatefpath=$(rpm --queryformat "$fpathfile\n" --specfile $(basename $SPECFILE) | head -n 1)
-	echo "$translatefpath"
+	if [ $DEBUG ] ; then echo "$translatefpath" ; fi
 	if [[ -f $CVSFiles/$1/$BASEORCONTRIB/$translatefpath ]] ; then 	
-		echo "************Copying $CVSFiles/$1/$BASEORCONTRIB/$translatefpath";
+		if [ $DEBUG ] ; then echo "************Copying $CVSFiles/$1/$BASEORCONTRIB/$translatefpath" ; fi
 		cp $CVSFiles/$1/$BASEORCONTRIB/$translatefpath . 
 	else
-		echo "************Not found $CVSFiles/$1/$BASEORCONTRIB/$translatefpath ( $fpathfile )- so not copied"
+		if [ $DEBUG ] ; then echo "************Not found $CVSFiles/$1/$BASEORCONTRIB/$translatefpath ( $fpathfile )- so not copied" ; fi
 	fi
 done
 
@@ -477,12 +504,12 @@ cd $GITFiles/$1
 # See if the package is a 3rd party or one of ours - indicated by "smeserver" or "e-smith" in the name
 if [[ "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
 	# one of ours
-	echo "************Found SMEServer source for $NAME"
+	if [ $DEBUG ] ; then echo "************Found SMEServer source for $NAME" ; fi
 	# Create the .gitignore file to ignore the archive
 	echo "*.$EXT" >> .gitignore
 	#and copy in the source tree
 	mkdir -p "$CODEDIR"
-	echo "************Copying $CVSFiles/$1/$BASEORCONTRIB/root `pwd`/$CODEDIR"
+	if [ $DEBUG ] ; then echo "************Copying $CVSFiles/$1/$BASEORCONTRIB/root `pwd`/$CODEDIR" ; fi
 	rsync -a --no-prune-empty-dirs "$CVSFiles/$1/$BASEORCONTRIB/$TREEPATH/root/" "`pwd`/$CODEDIR/"
 	# copy createlinks to base
 	if [ -e "$CVSFiles/$1/$BASEORCONTRIB/$TREEPATH/createlinks" ] ; then cp "$CVSFiles/$1/$BASEORCONTRIB/$TREEPATH/createlinks" "`pwd`/." ; fi
@@ -494,16 +521,16 @@ if [[ "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
 else
 	# Third party package
 	# copy over the archive file and make sure the extension is tracked by git-lfs
-	echo "************Found 3rd party package $NAME"
+	if [ $DEBUG ] ; then echo "************Found 3rd party package $NAME" ; fi
 	git lfs install
 	git lfs track "*.$EXT"
 	git add .gitattributes
 	#git config lfs.http://gitea.bjsystems.co.uk/SMEContribs/bugzilla.git/info/lfs.locksverify true
 	if [[ -f $CVSFiles/$1/$BASEORCONTRIB/$ARCHIVEFILE ]] ; then 
-		echo "************Copying archivefile $CVSFiles/$1/$BASEORCONTRIB/$ARCHIVEFILE"
+		if [ $DEBUG ] ; then echo "************Copying archivefile $CVSFiles/$1/$BASEORCONTRIB/$ARCHIVEFILE" ; fi
 		cp $CVSFiles/$1/$BASEORCONTRIB/$ARCHIVEFILE . 
 	else
-		echo "Unable to find archivefile: $CVSFiles/$1/$BASEORCONTRIB/$ARCHIVEFILE - nothing copied"
+		if [ $DEBUG ] ; then echo "Unable to find archivefile: $CVSFiles/$1/$BASEORCONTRIB/$ARCHIVEFILE - nothing copied" ; fi
 	fi
 	cd $GITFiles/$1
 fi
@@ -577,7 +604,7 @@ chmod +x $GITFiles/common/make-archive.sh
 
 # Edit the Readme.md - try to add a link to the wiki for this package - only if it is an SME package
 cd $GITFiles/$1
-echo "************READMECONTENTS:$READMECONTENTS"
+if [ $DEBUG ] ; then echo "************READMECONTENTS:$READMECONTENTS" ; fi
 PACKAGENAME=${NAME}
 if [[ "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
 	# See if we have a previous contents of the README.md
@@ -615,7 +642,7 @@ if [[ "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
         # nothing previous    
 		# Copy across the Wiki links to the README
 		if [ ! "$URLS" = "" ]; then
-			echo "************The wiki page(s) for $PACKAGENAME exist."
+			if [ $DEBUG ] ; then echo "************The wiki page(s) for $PACKAGENAME exist." ; fi
 			echo -en "\n\n## Wiki\n$URLS" >> README.md
 		fi
 		
@@ -641,7 +668,7 @@ if [[ "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
 		model="text-davinci-003"
 		temperature=0.8
 		# Send the request to the API
-		response=$(curl -X POST https://api.openai.com/v1/engines/$model/completions \
+		response=$(curl "$curlsilent" -X POST https://api.openai.com/v1/engines/$model/completions \
 			 -H "Content-Type: application/json" \
 			 -H "Authorization: Bearer $OPENAI_API_KEY" \
 			 -d '{"prompt": "'"$prompt"'", "temperature": 0.8, "max_tokens": 256}')
@@ -655,7 +682,7 @@ if [[ "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
 		echo -e "<br />$PARAGRAPH" >> README.md
 	else
 	    # overwrite with previous contents
-	    echo "************Picked up previous README contents"
+	    if [ $DEBUG ] ; then echo "************Picked up previous README contents" ; fi
 	    mv -f $READMECONTENTS ./README.md
 	fi
 else
@@ -665,21 +692,21 @@ else
 		model="text-davinci-003"
 		temperature=0.8
 		# Send the request to the API
-		response=$(curl -X POST https://api.openai.com/v1/engines/$model/completions \
+		response=$(curl "$curlsilent" -X POST https://api.openai.com/v1/engines/$model/completions \
 			 -H "Content-Type: application/json" \
 			 -H "Authorization: Bearer $OPENAI_API_KEY" \
 			 -d '{"prompt": "'"$prompt"'", "temperature": 0.8, "max_tokens": 256}')
 		# Extract the text from the response
 		PARAGRAPH=`echo $response | jq -r '.choices[].text'`
 		# Add it to what was there already
-		echo "************Creating description for $1"
+		if [ $DEBUG ] ; then echo "************Creating description for $1" ; fi
 		echo -e "\n\n## Description\n" >> README.md
 		echo -e "<br />*This description has been generated by an LLM AI system and cannot be relied on to be fully correct.*" >> README.md
 		echo -e "*Once it has been checked, then this comment will be deleted*" >> README.md
 		echo -e "<br />$PARAGRAPH" >> README.md
 	else
 	    # overwrite with previous contents
-	    echo "************Picked up previous README contents"
+	    if [ $DEBUG ] ; then echo "************Picked up previous README contents" ; fi
 	    mv -f $READMECONTENTS ./README.md
 	fi
 fi
@@ -690,7 +717,7 @@ if [[ -z $WIKILINK ]] ; then
 fi
 
 # and then update the repo parameters
-RESPONSE=$(curl -X 'PATCH'   "$GITEAHOST/api/v1/repos/$ORGGITEA/$REPO_NAME"   \
+RESPONSE=$(curl "$curlsilent" -X 'PATCH'   "$GITEAHOST/api/v1/repos/$ORGGITEA/$REPO_NAME"   \
 	-H 'accept: application/json'   \
 	-H "Authorization: token $GITEAACCESSTOKEN" \
 	-H 'Content-Type: application/json'   \
@@ -706,7 +733,7 @@ RESPONSE=$(curl -X 'PATCH'   "$GITEAHOST/api/v1/repos/$ORGGITEA/$REPO_NAME"   \
 		}
 	')
 # should check response here.
-echo $RESPONSE
+if [ $DEBUG ] ; then echo $RESPONSE ; fi
 #exit 0
 
 cd $GITFiles/$1