diff --git a/git-getperl.sh b/git-getperl.sh
new file mode 100755
index 0000000..06bac4c
--- /dev/null
+++ b/git-getperl.sh
@@ -0,0 +1,595 @@
+#!/bin/bash
+#
+# $1 = perl Module e.g. File::MMagic
+# $2 = Organisation (smeserver, smecontrib or user) - default smeserver
+# optional (can be in any order)
+#   <local> will use parameters set for local repository else it will use remote
+#   <debug> turn on debug regardless of ~/.smegit/config
+#   <noisy> print a line showing how it was called
+# This works whether the repo and local files exist of not (it deletes them if necessary)
+# However if the remote repo exists, it preserves the README.md file so that edits are not lost
+# Also note: I have had difficulty deleting all the link files in the source tree!
+#
+
+if [[ -z $1 ]] ; then
+	echo "************git-getperl.sh <modulename> <organization> [<local>]"
+	exit 0
+fi
+
+#
+# Pull in parameters from a config file ~/.smegit/config
+#
+inifilename=$(echo ~)"/.smegit/config"
+if [ ! -e $inifilename ] ; then
+  # Not here, look at system default
+  if [ ! -e /etc/smegit.ini ] ; then 
+    echo "No ini file found $inifiename or /etc/smegit.ini"
+    echo "git-getperl.sh <modulename> <organization> [<local>]"
+    exit 1
+  else
+    initfilename="/etc/smegit.ini"
+  fi
+fi 
+
+while read -r line || [[ -n "$line" ]]; do
+    if [[ $line =~ ^\[.*\]$ ]]
+    then
+        section=${line#*[}
+        section=${section%]*}
+    else
+        if [[ $line =~ ^[^#]*= ]]
+        then
+            key=${line%=*}
+            value=${line#*=}
+            declare "${section}_${key}=$value"
+        fi
+    fi
+done < "$inifilename"
+DEBUG=
+if [ ${smegit_DEBUG} == "true" ] ; then DEBUG=true ; fi
+
+GITEAUser=${remote_USER}
+GITEAACCESSTOKEN=${remote_GITEAACCESSTOKEN}
+GITEAHOST=${remote_GITEAHOST}
+NOISY=
+EXTRAPARAMS=
+for param in $3 $4 $5 $6; do
+  if [ $param ] ; then
+    case $param in
+	  local )
+    	GITEAUser=${local_USER}
+    	GITEAACCESSTOKEN=${local_GITEAACCESSTOKEN}
+    	GITEAHOST=${local_GITEAHOST}
+		;;
+	  debug )
+		DEBUG=true ;;
+      noisy )
+        NOISY=true ;;
+      * )
+        EXTRAPARAMS=$EXTRAPARAMS" "$param ;;
+    esac
+  else
+	  break
+  fi
+done
+
+if [ $NOISY ] ; then echo "git-getperl.sh $1 $2 $3 $4 $5 $6" ; fi
+if [ $DEBUG ] ; then echo "************found ini file: $inifilename" ; fi
+# Make this null if you want lots of output. Still quite a bit anyway
+QUIET="-q"
+SILENT4CURL="-s" 
+SILENT4MAKE="-s"
+if [ $DEBUG ] ; then 
+	QUIET=
+	SILENT4CURL="-v"
+	SILENT4MAKE=
+fi
+# Make this null to get curl to check ssl cert
+checkSSL="-k"
+
+LOCALUser=${local_USER}
+if [[ $smegit_WORKDIR == ~* ]] ; then
+    # relative to users home dir
+    WORKDIR=$(echo ~)${smegit_WORKDIR:1}
+else
+    # absolute path
+    WORKDIR=${smegit_WORKDIR}
+fi
+if [ $DEBUG ] ; then echo "WORKDIR=$WORKDIR" ; fi
+# create repo name from perl- module with :: replaced by -
+IFS=::
+words=()
+for i in $1; do words+=($i) ; done
+RepoName="perl"
+for word in ${words[@]}; do RepoName="$RepoName-$word" ; done
+if [ $DEBUG ] ; then echo "RepoName=$RepoName" ; fi
+IFS="${IFS:0:3}"
+RemoteRepoURL="$GITEAHOST/$ORGGITEA/$RepoName"
+
+#
+# Unless you have changed this, this (below) is my (brian) OpenAI token, but happy to use it here, it costs peanuts!
+# unless you delete the repo in between duplicate runs, then the README.md is preserved, so the ChatGPT is only called once.
+# but it means you can edit the results on gitea without fear of loosing your edits if the repo is re-created using this script
+#
+export OPENAI_API_KEY=${smegit_OPENAI_API_KEY}
+COMMONREPO=${smegit_COMMONREPO}
+
+# Prepare variable for file in repo to indicate core or contrib.
+# and init gitea organisation 
+# Adjust where we put the repo locally accordingly.
+ORGGITEA="smeserver"
+if [[ "$2" == "smecontribs" ]]; then
+  ORGGITEA=$2
+  BASEORCONTRIB="contribs10"
+  PRODUCTBUGZILLA="SME%20Contribs"
+else
+  BASEORCONTRIB="sme10"
+  PRODUCTBUGZILLA="SME%20Server%2010.X"
+fi  
+
+# Work out if it is an SMEServer package or a 3rd party one
+PACKAGETYPE="3rd Party (Maintained by Koozali)"
+
+# Check that git-lfs is installed
+if command -v git-lfs > /dev/null; then
+    if [ $DEBUG ] ; then echo "************Git LFS is installed" ; fi
+else
+    echo "ERROR********************** Git LFS is not installed ******************"
+    exit 1
+fi
+
+# Check that jq is installed
+if command -v jq -V > /dev/null; then
+    if [ $DEBUG ] ; then echo "************Jq is installed" ; fi
+else
+    echo "ERROR********************** jq is not installed (try EPEL)**************"
+    exit 1
+fi
+
+
+# Check that lua is installed (needed for change-log)
+if command -v lua -V > /dev/null; then
+    if [ $DEBUG ] ; then echo "************lua is installed" ; fi
+else
+    echo "ERROR********************** lua is not installed (try EPEL)**************"
+    exit 1
+fi
+
+
+# and check for the special scripts - changelog and BogusDateBot.sh - I think these are available in the
+# mockbuild rpm, but beware Bug:12340 - changelog needs an edit to work!
+if type -P change-log >/dev/null 2>&1; then
+  if [ $DEBUG ] ; then echo "************change-log is installed" ; fi
+else
+  echo "ERROR********************change-log is not installed*********** (try installing smeserver-mockbuild)"
+  exit 1
+fi
+if [ $DEBUG ] ; then echo "************..and also note bug:12340" ; fi
+
+if type -P BogusDateBot.sh >/dev/null 2>&1; then
+  if [ $DEBUG ] ; then echo "************BogusDateBot.sh is installed"; fi
+else
+  echo "ERROR********************BogusDateBot.sh is not installed*********** (try installing smeserver-mockbuild)"
+  exit 1
+fi
+
+# Create work directories
+cd $WORKDIR
+perlFiles="$WORKDIR/$ORGGITEA/perl"
+mkdir -p $perlFiles
+
+# Make sure credentials taken from store
+# The first time you pull or push it will ask for credentials and then save them in a file.
+git config --global credential.helper store
+
+#
+# Create the perl repository
+#
+cd $perlFiles
+# First delete any existing module directory tree
+# if there at all 
+if [ -d "$RepoName" ] ; then
+	if [ $DEBUG ] ; then echo "************Deleting local CVS files" ; fi
+	rm -Rf $perlFiles/$RepoName
+fi
+
+# Then get it fully from CVS
+mkdir -p $perlFiles/$RepoName
+cd $perlFiles/$RepoName
+cpanspec "$1"
+
+# Check that the spec file is there
+# First bet is the packagename.spec
+SPECFILE=$RepoName.spec
+ORIGSPECFILE=$SPECFILE
+GOTONE=0
+if [ ! -f  $SPECFILE ] ; then
+	# See if it is a perl package which has the perl or perl-pear taken off the front
+	for front in "perl-" "perl-pear-" ; do
+		reg="^($front).*"
+		echo "$front $RepoName $reg"
+		if [[ "$RepoName" =~ $reg ]]; then
+		    NEWNAME="${RepoName#$front}"
+		    #echo $NEWNAME
+		    SPECFILE="$NEWNAME.spec"
+		    #echo $SPECFILE
+		    if [ -f  $SPECFILE ] ; then
+			GOTONE=1
+			break
+		    fi
+		fi
+	done
+else
+	GOTONE=1
+fi
+
+if [[ $GOTONE -eq 0 ]] ; then 
+  echo "Cannot find .spec file: `pwd`/$ORIGSPECFILE"
+  exit 1
+fi
+
+# Create the local Git repository
+GITFiles=$WORKDIR/$ORGGITEA
+mkdir -p $GITFiles
+cd $GITFiles
+
+# Delete the local first
+if [ -d "$RepoName" ] ; then
+	if [ $DEBUG ] ; then echo "************Deleting local GIT files" ; fi
+	rm -Rf $GITFiles/$RepoName
+fi
+
+# See if it exists on the Gitea host
+if [ $DEBUG ] ; then echo "check that $GITEAHOST/$ORGGITEA/$RepoName exists" ; fi
+READMECONTENTS=
+RESPONSE=$(curl $checkSSL $SILENT4CURL -o /dev/null -w "%{http_code}" "$GITEAHOST/api/v1/repos/$ORGGITEA/$RepoName")
+if [ "$RESPONSE" == "200" ]; then
+    if [ $DEBUG ] ; then echo "************Repository for $RepoName already exists!" ; fi
+	# If so, clone it (just want the README.md)
+    if [ $DEBUG ] ; then echo "git clone $GITEAHOST/$ORGGITEA/$RepoName.git" ; fi
+	cd $GITFiles
+	git clone "$GITEAHOST/$ORGGITEA/$RepoName.git"
+	if [[ -f $GITFILES/$RepoName/README.md ]] ; then
+		# Move it and remember its new (temp) name
+		READMECONTENTS=`mktemp`
+		mv -f README.md "$READMECONTENTS"
+	fi
+	# Now delete the repo, re-create it and clone it in to local
+	if [ $DEBUG ] ; then echo "Delete $ORGGITEA/$RepoName" ; fi
+	RESPONSE=$(curl "$checkSSL" "$SILENT4CURL" -o /dev/null -w "%{http_code}" -X 'DELETE' \
+		"$GITEAHOST/api/v1/repos/$ORGGITEA/$RepoName" \
+		-H 'accept: application/json' \
+		-H "Authorization: token $GITEAACCESSTOKEN")
+	if [[ $RESPONSE == "204" || $RESPONSE == "404" ]] ; then
+		if [ $DEBUG ] ; then echo "************Repository $ORGGITEA/$RepoName deleted or does not exist" ; fi
+	else	
+		echo "************Can NOT delete Repository $ORGGITEA/$RepoName - results will be unknown - Aborting!"
+		echo "RESPONSE=$RESPONSE"
+		exit 1
+	fi
+	# Delete all files, links and directories
+	if [ $DEBUG ] ; then echo "************Deleting local GIT files" ; fi
+	cd $GITFiles
+	rm -Rf $GITFiles/$RepoName
+else
+    if [ $DEBUG ] ; then echo "************Repository for $RepoName does not exist." ; fi
+fi
+
+cd $GITFiles
+#git init $QUIET $1
+
+#
+# Re-create the repo
+#
+if [ $DEBUG ] ; then echo "************Creating repo for $RepoName $PACKAGETYPE" ; fi
+RESPONSE=$(curl "$checkSSL" "$SILENT4CURL" -X 'POST' \
+	"$GITEAHOST/api/v1/orgs/$ORGGITEA/repos"   \
+	-H 'accept: application/json'   \
+	-H "Authorization: token $GITEAACCESSTOKEN" \
+	-H 'Content-Type: application/json'   \
+	-d '{
+			"auto_init": true,
+			"default_branch": "master",
+			"description": "'"$PACKAGETYPE git repo for $RepoName $ORGGITEA"'",
+			"gitignores": "",
+			"issue_labels": "Default",
+			"license": "Apache-2.0",
+			"name": "'"$RepoName"'",
+			"private": false,
+			"readme": "Default",
+			"template": false,
+			"trust_model": "Default Trust Model"
+	}')
+if [ $DEBUG ] ; then echo $RESPONSE ; fi
+
+# and extract the http URL for it
+HTTP_URL=`echo $RESPONSE | jq -r '.html_url'`
+
+if [ $DEBUG ] ; then echo $HTTP_URL ; fi
+#if [[ -z "${HTTP_URL}"  ]]; then
+#	echo "ERROR*******Repo for $RepoName appears NOT to have been created "
+#	echo "$RESPONSE"
+#	exit 1
+#fi 
+
+# And check it now exists
+RESPONSE=$(curl "$SILENT4CURL" -o /dev/null -w "%{http_code}" "$GITEAHOST/api/v1/repos/$ORGGITEA/$RepoName")
+if [[ "$RESPONSE" == "200" ]]; then
+    if [ $DEBUG ] ; then echo "************Repository for $RepoName exists" ; fi
+else
+    echo "ERROR*******Repository for $RepoName has not been created ($RESPONSE)"
+    exit 1
+fi
+
+# Pull in the auto created or updated files
+cd $GITFiles
+#GIT_SSL_NO_VERIFY=true git clone "$GITEAHOST/$ORGGITEA/$RepoName.git" 
+git clone "$GITEAHOST/$ORGGITEA/$RepoName.git"
+
+if [ ! -d $GITFiles/$RepoName ] ; then 
+  echo "ERROR*******Unable to access the new repo directory for $HTTP_URL $GITFiles/$RepoName"
+  exit 1
+fi
+
+# Fully populate the directory (gets the tar file - which is not strictly in CVS) and creates the directory source tree
+# applying the patches to the base in the tar file.
+# Might need to replace this by the code from the makefile if we decide to move "make prep" to git moe likely we'll implement a new one "make gitprep".
+cd $GITFiles/$RepoName
+cp $perlFiles/$RepoName/* .
+
+# Add file indicating which release and contribs or base - this is matched by the makefile with the contents of the branch file in the common directory
+# to give the details of the release (EL7/8/9/ etc)
+# This assumes SME10 and contribs10 or sme10 directory names, later releases can update the value in the file and Makefile should still work.
+echo "sme10" > contriborbase
+
+# and see if the spec file is not according to specification of <packagename>.spec
+# if not rename it
+if [[ $SPECFILE != $ORIGSPECFILE ]] ; then
+   if [ $DEBUG ] ; then echo "************Renaming specfile from $(basename $SPECFILE) $(basename $ORIGSPECFILE)" ; fi
+   mv "$(basename $SPECFILE)" "$(basename $ORIGSPECFILE)"
+   SPECFILE=$ORIGSPECFILE
+fi
+
+## and there may be extra files that maybe needed, these can be identified from the "Source" spec in the .spec files
+SOURCES=$(grep -i -E '^Source[0-9]*:' $(basename $SPECFILE) | cut -d: -f2- | sed 's/ //g')
+if [ $DEBUG ] ; then echo "$SOURCES" ; fi
+
+#SOURCE=$(rpm --queryformat '$SOURCE\n' --specfile $SPECFILE | head -n 1)
+for fpath in $SOURCES; do
+	# Needs another step incase the extraction from the spec file contains spec variables
+	fpathfile=$(basename $fpath)
+	if [ $DEBUG ] ; then echo "$fpathfile" ; fi
+	translatefpath=$(rpm --queryformat "$fpathfile\n" --specfile $(basename $SPECFILE) | head -n 1)
+	if [ $DEBUG ] ; then echo "$translatefpath" ; fi
+	if [[ -f $CVSFiles/$RepoName/$BASEORCONTRIB/$translatefpath ]] ; then 	
+		if [ $DEBUG ] ; then echo "************Copying $CVSFiles/$RepoName/$BASEORCONTRIB/$translatefpath" ; fi
+		cp $CVSFiles/$RepoName/$BASEORCONTRIB/$translatefpath . 
+	else
+		if [ $DEBUG ] ; then echo "************Not found $CVSFiles/$RepoName/$BASEORCONTRIB/$translatefpath ( $fpathfile )- so not copied" ; fi
+	fi
+done
+
+# Take out the logs and rpms from the git save
+echo "*.rpm" >> .gitignore
+echo "*.log" >> .gitignore
+# and the backed up spec file from BogusDateBot.sh
+echo "*spec-20*" >>.gitignore
+
+cd $GITFiles/$RepoName
+# See if the package is a 3rd party or one of ours - indicated by "smeserver" or "e-smith" in the name
+if [[ "$RepoName" =~ ^(smeserver-|e-smith-).* ]]; then
+	# one of ours
+	if [ $DEBUG ] ; then echo "************Found SMEServer source for $NAME" ; fi
+	# Create the .gitignore file to ignore the archive
+	echo "*.$EXT" >> .gitignore
+	#and copy in the source tree
+	mkdir -p "$CODEDIR"
+	if [ $DEBUG ] ; then echo "************Copying $CVSFiles/$RepoName/$BASEORCONTRIB/root `pwd`/$CODEDIR" ; fi
+	rsync "$QUIET" -a --no-prune-empty-dirs "$CVSFiles/$RepoName/$BASEORCONTRIB/$TREEPATH/root/" "`pwd`/$CODEDIR/"
+	# copy createlinks to base
+	if [ -e "$CVSFiles/$RepoName/$BASEORCONTRIB/$TREEPATH/createlinks" ] ; then cp "$CVSFiles/$RepoName/$BASEORCONTRIB/$TREEPATH/createlinks" "`pwd`/." ; fi
+	# copy anything else in the base directory of $TREEPATH into the additional directory
+	if [ ! -d "`pwd`/additional" ] ; then mkdir -p "`pwd`/additional" ; fi
+	rsync "$QUIET" -av --exclude "createlinks" --exclude "root/" "$CVSFiles/$RepoName/$BASEORCONTRIB/$TREEPATH/" "`pwd`/additional/"
+	# and plug a dummy into any empty directories
+	find "`pwd`/root"/* -type d -empty -exec touch {}/.gitignore \;
+else
+	# Third party package
+	# copy over the archive file and make sure the extension is tracked by git-lfs
+	if [ $DEBUG ] ; then echo "************Found 3rd party package $NAME" ; fi
+	git lfs install
+	git lfs track "*.$EXT"
+	git add .gitattributes
+	#git config lfs.http://gitea.bjsystems.co.uk/SMEContribs/bugzilla.git/info/lfs.locksverify true
+	if [[ -f $CVSFiles/$RepoName/$BASEORCONTRIB/$ARCHIVEFILE ]] ; then 
+		if [ $DEBUG ] ; then echo "************Copying archivefile $CVSFiles/$RepoName/$BASEORCONTRIB/$ARCHIVEFILE" ; fi
+		cp $CVSFiles/$RepoName/$BASEORCONTRIB/$ARCHIVEFILE . 
+	else
+		if [ $DEBUG ] ; then echo "Unable to find archivefile: $CVSFiles/$RepoName/$BASEORCONTRIB/$ARCHIVEFILE - nothing copied" ; fi
+	fi
+	cd $GITFiles/$RepoName
+fi
+
+cd $GITFiles/$RepoName
+
+# Take out any bogus dates:
+#BogusDateBot.sh $(basename $SPECFILE)
+
+
+# Re-factor the Common directory so that it is outside the repo being created.
+# one Common directory for each Organisation
+# 
+# See if it already exists
+if [ ! -e $GITFiles/common ]; then
+  #Get it
+  cd $GITFiles
+  git clone "${smegit_COMMONREPO}"
+  if [ ! -e $GITFiles/common ]; then
+    echo "ERROR*******No Common Repo found - package $RepoName"
+    exit 1
+  fi
+else
+  # Just refresh it
+  cd $GITFiles/common
+  git pull $QUIET
+fi 
+
+# Edit the Readme.md - try to add a link to the wiki for this package - only if it is an SME package
+cd $GITFiles/$RepoName
+if [ $DEBUG ] ; then echo "************READMECONTENTS:$READMECONTENTS" ; fi
+PACKAGENAME=${NAME}
+if [[ "$RepoName" =~ ^(smeserver-|e-smith-).* ]]; then
+	# See if we have a previous contents of the README.md
+	if [[ "$RepoName" =~ ^(smeserver-).* ]]; then
+		PACKAGENAME=${NAME#smeserver-}
+	fi
+
+	# first find the relevant wiki entry
+
+	MEDIAWIKI_SITE="https://wiki.koozali.org/api.php"
+	SEARCH_TERM="$PACKAGENAME"
+
+	# Call the API to perform the search and store the JSON response in a variable
+	RESPONSE=$(curl -s "$MEDIAWIKI_SITE?action=query&format=json&list=search&srsearch=${SEARCH_TERM}&srprop=size%7Cwordcount%7Ctimestamp%7Csnippet&srlimit=10")
+
+	# Use jq to extract the titles and pageids of the pages that match the search term (case-insensitive)
+	RESULTS=$(echo "$RESPONSE" | jq -r '.query.search[] | select(.title | ascii_downcase | contains("'"${SEARCH_TERM}"'" | ascii_downcase)) | .title, .pageid')
+
+	# Loop through the results and construct the URL for each page
+	URLS=$(while read -r TITLE; do \
+		read -r PAGEID; \
+		URL="https://wiki.koozali.org/${TITLE}"; \
+		URL=$(echo $URL | sed 's/ /_/g'); \
+		echo "<br />${URL}"; \
+	done <<< "${RESULTS}" )
+	# and get the first non french (sorry JP!)
+	WIKILINK=$(while read -r TITLE; do \
+		read -r PAGEID; \
+		URL="https://wiki.koozali.org/${TITLE}"; \
+		URL=$(echo $URL | sed 's/ /_/g'); \
+		if [[ ! "$URL" =~ 'fr' ]] ; then echo "${URL}"; break; fi \
+	done <<< "${RESULTS}" )
+
+    if [[ "$READMECONTENTS" == "" ]]; then
+        # nothing previous    
+		# Copy across the Wiki links to the README
+		if [ ! "$URLS" = "" ]; then
+			if [ $DEBUG ] ; then echo "************The wiki page(s) for $PACKAGENAME exist." ; fi
+			echo -en "\n\n## Wiki\n$URLS" >> README.md
+		fi
+		
+		# And add bugzilla link
+		echo -en "\n\n## Bugzilla" >> README.md
+        echo -en "\nShow list of outstanding bugs: [here](https://bugs.koozali.org/buglist.cgi?component=$RepoName&product=$PRODUCTBUGZILLA&query_format=advanced&limit=0&bug_status=UNCONFIRMED&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&bug_status=CONFIRMED)" >> README.md
+		# Edit the header to add the logo
+		#KOOZALILOGO='<img src="http:\/\/vps.bjsystems.co.uk\/KoozaliLogo4GiteaRepo.png" style="vertical-align:bottom">'
+		KOOZALILOGO='<img src="https:\/\/www.koozali.org\/images\/koozali\/Logo\/Png\/Koozali_logo_2016.png" width="25%" vertical="auto" style="vertical-align:bottom">'
+		if [[ "$RepoName" =~ ^(smeserver-).* ]]; then
+			sed -i "s/^# smeserver/# $KOOZALILOGO smeserver/" README.md
+		else
+			sed -i "s/^# e-smith/# $KOOZALILOGO e-smith/" README.md
+		fi
+		# Good to extract some of the wiki here, and load it into the readme, 
+		# OR I could ask GPTChat to write me paragraph on the contrib 8-))
+		# Set the parameters for the request
+		if [[ "$RepoName" =~ ^(smeserver-).* && "$ORGGITEA" == "smecontribs" ]]; then
+			prompt="Write me a paragraph on the $PACKAGENAME software contrib for smeserver"
+		else
+			prompt="Write me a paragraph about the software $PACKAGENAME"
+		fi
+		model="text-davinci-003"
+		temperature=0.8
+		# Send the request to the API
+		response=$(curl "$SILENT4CURL" -X POST https://api.openai.com/v1/engines/$model/completions \
+			 -H "Content-Type: application/json" \
+			 -H "Authorization: Bearer $OPENAI_API_KEY" \
+			 -d '{"prompt": "'"$prompt"'", "temperature": 0.8, "max_tokens": 256}')
+		# Extract the text from the response
+		PARAGRAPH=`echo $response | jq -r '.choices[].text'`
+		# Add it to what was there already
+		if [ $DEBUG ] ; then echo "************Creating description for $RepoName" ; fi
+		echo -e "\n\n## Description\n" >> README.md
+		echo -e "<br />*This description has been generated by an LLM AI system and cannot be relied on to be fully correct.*" >> README.md
+		echo -e "*Once it has been checked, then this comment will be deleted*" >> README.md
+		echo -e "<br />$PARAGRAPH" >> README.md
+	else
+	    # overwrite with previous contents
+	    if [ $DEBUG ] ; then echo "************Picked up previous README contents" ; fi
+	    mv -f $READMECONTENTS ./README.md
+	fi
+else
+    if [ "$READMECONTENTS" == "" ]; then 
+		# Add in at least a description 
+		prompt="Tell me what the software package $PACKAGENAME does?"
+		model="text-davinci-003"
+		temperature=0.8
+		# Send the request to the API
+		response=$(curl "$SILENT4CURL" -X POST https://api.openai.com/v1/engines/$model/completions \
+			 -H "Content-Type: application/json" \
+			 -H "Authorization: Bearer $OPENAI_API_KEY" \
+			 -d '{"prompt": "'"$prompt"'", "temperature": 0.8, "max_tokens": 256}')
+		# Extract the text from the response
+		PARAGRAPH=`echo $response | jq -r '.choices[].text'`
+		# Add it to what was there already
+		if [ $DEBUG ] ; then echo "************Creating description for $RepoName" ; fi
+		echo -e "\n\n## Description\n" >> README.md
+		echo -e "<br />*This description has been generated by an LLM AI system and cannot be relied on to be fully correct.*" >> README.md
+		echo -e "*Once it has been checked, then this comment will be deleted*" >> README.md
+		echo -e "<br />$PARAGRAPH" >> README.md
+	else
+	    # overwrite with previous contents
+	    if [ $DEBUG ] ; then echo "************Picked up previous README contents" ; fi
+	    mv -f $READMECONTENTS ./README.md
+	fi
+fi
+
+# Tell repo to use koozali.org bugzilla and wiki - this does not work on CREATE currently - 19Apr2023
+if [[ -z $WIKILINK ]] ; then 
+	WIKILINK="https://wiki.koozali.org"
+fi
+
+# and then update the repo parameters
+RESPONSE=$(curl "$SILENT4CURL" -X 'PATCH'   "$GITEAHOST/api/v1/repos/$ORGGITEA/$REPO_NAME"   \
+	-H 'accept: application/json'   \
+	-H "Authorization: token $GITEAACCESSTOKEN" \
+	-H 'Content-Type: application/json'   \
+	-d '{
+			"external_tracker": {
+				"external_tracker_format": "https://bugs.koozali.org/show_bug.cgi?id={index}",
+				"external_tracker_style": "numeric",
+				"external_tracker_url": "'"https://bugs.koozali.org/buglist.cgi?component=$REPO_NAME&product=$PRODUCTBUGZILLA"'"
+			},
+			"external_wiki": {
+				"external_wiki_url": "'"$WIKILINK"'"
+			}
+		}
+	')
+# should check response here.
+if [ $DEBUG ] ; then echo $RESPONSE ; fi
+#exit 0
+
+cd $GITFiles/$RepoName
+# stage and commit all the files created locally
+git add -A
+echo "$RepoName git status" >>gitstatus.log
+git status >>gitstatus.log
+if [ $DEBUG ] ; then git status ; fi
+COMMENT="initial commit of file from CVS for $RepoName on `date`"
+git commit -m  "$COMMENT" $QUIET
+
+# push the converted git repository to the remote
+git remote remove origin
+git remote add origin "$GITEAHOST/$ORGGITEA/$RepoName.git"
+#GIT_SSL_NO_VERIFY=true git push --force -u $QUIET origin master
+git push --force -u $QUIET origin master
+
+# Now create the version and release tag for these files
+#RELEASE=`rpm --queryformat '%{release}\n' --specfile $SPECFILE | head -n 1`
+# Release is not reliable - if you run on Rocky it comes back EL8, centos 7  - EL7
+# So, we need to just take the build part (first word)
+#TAG=$VERSION"-"${RELEASE%.*}
+#git tag -a $TAG -m "$COMMENT"
+#git push origin $TAG $QUIET
+
+echo "Created $RepoName Repo: $HTTP_URL - Comment:$COMMENT tag:$TAG"
+exit 0