Add release types to make-release

Update email address

README.md

@@ -138,7 +138,11 @@ optional: (in any order)
 
 * \<local\> used with org= and will use local GITEA instance, default remote - will be passed to \<script\>
 * \<noisy\> show line being executed
-* \<debug\> run in debug modea
+* \<debug\> run in debug mode
+* \<draft\> create a draft release
+* \<prerelease\> create a pre-release 
+
+Note that no release type will give a full stable release
 
 Does:
 

git-list-all-org-repos.sh

@@ -0,0 +1,121 @@
+#!/bin/bash
+# Pull in parameters from a ini file
+#
+# Pull in parameters from a config file ~/.smegit/config
+#
+inifilename=$(echo ~)"/.smegit/config"
+if [ ! -e $inifilename ] ; then
+  # Not here, look at system default
+  if [ ! -e /etc/smegit.ini ] ; then 
+    echo "No ini file found $inifilename or /etc/smegit.ini"
+	echo "git-list-all-org-repos.sh <organisation> [draftrelease | prerelease | release] [cloneurl] [zipurl]"
+    exit 1
+  else
+    inifilename="/etc/smegit.ini"
+  fi
+fi 
+
+while read -r line || [[ -n "$line" ]]; do
+    if [[ $line =~ ^\[.*\]$ ]]
+    then
+        section=${line#*[}
+        section=${section%]*}
+    else
+        if [[ $line =~ ^[^#]*= ]]
+        then
+            key=${line%=*}
+            value=${line#*=}
+            declare "${section}_${key}=$value"
+        fi
+    fi
+done < "$inifilename"
+
+GITEAUser=${remote_USER}
+GITEAACCESSTOKEN=${remote_GITEAACCESSTOKEN}
+GITEAHOST=${remote_GITEAHOST}
+NOISY=
+EXTRAPARAMS=
+DEBUG=
+for param in $2 $3 $4 $5 $6 $7 $8 $9 $10; do
+  if [ $param ] ; then
+    case $param in
+	  local )
+    	GITEAUser=${local_USER}
+    	GITEAACCESSTOKEN=${local_GITEAACCESSTOKEN}
+    	GITEAHOST=${local_GITEAHOST}
+		;;
+	  debug )
+		DEBUG=true ;;
+      noisy )
+        NOISY=true ;;
+      release )
+        SHOWRELEASE=true;SHOWPRERELEASE=false;SHOWDRAFT=false ;;
+      draftrelease )
+        SHOWRELEASE=true;SHOWPRERELEASE=false;SHOWDRAFT=true ;;
+      prerelease )
+        SHOWRELEASE=true;SHOWPRERELEASE=true;SHOWDRAFT=false ;;
+      allreleases )
+        SHOWRELEASE=true;SHOWPRERELEASE=true;SHOWDRAFT=true ;;     
+      cloneurl )
+        SHOWCLONEURL=true ;;
+      zipurl )
+        SHOWZIPURL=true ;;
+      id )
+		SHOWID=true ;;
+      * )
+        EXTRAPARAMS=$EXTRAPARAMS" "$param ;;
+    esac
+  else
+	  break
+  fi
+done
+
+if [[ -z $1 ]] ; then
+	echo "git-list-all-org-repos.sh <organisation> [draftrelease | prerelease | release] [cloneurl] [zipurl]"
+	exit 0
+fi
+
+ORG_NAME="$1"
+PAGE_COUNTER=1
+REPO_LIST=""
+
+while true; do
+    REPO_PAGE=$(curl -s -H "Authorization: token $GITEAACCESSTOKEN" "$GITEAHOST/api/v1/orgs/$ORG_NAME/repos?page=$PAGE_COUNTER")
+    if [[ $(echo $REPO_PAGE | jq length) -eq 0 ]]; then
+        break
+    fi
+    REPO_LIST="$REPO_LIST $(echo $REPO_PAGE | jq -r .[].full_name | cut -d / -f 2 )"
+    PAGE_COUNTER=$((PAGE_COUNTER+1))
+done
+REPO_LIST=$(echo $REPO_LIST | tr -s  '[:space:]' '\n' | sort)
+for item in $REPO_LIST ; do 
+	line=$item
+	if [[ $SHOWID || $SHOWRELEASE || $SHOWCLONEURL || $ZIPURL ]] ; then
+		#Find and show releases 
+#		echo "$GITEAHOST/api/v1/repos/$ORG_NAME/$item/releases?draft=true&pre-release=true&limit=100" \
+#					-H 'accept: application/json' \
+#			-H "Authorization: token $GITEAACCESSTOKEN"
+		RESPONSE=$(curl -s -X 'GET' \
+			"$GITEAHOST/api/v1/repos/$ORG_NAME/$item/releases?draft=$SHOWDRAFT&pre-release=SHOWPRERELEASE&limit=100" \
+			-H 'accept: application/json' \
+			-H "Authorization: token $GITEAACCESSTOKEN")
+		if [ $DEBUG ] ; then echo "$RESPONSE"; fi
+		if [ $SHOWRELEASE ] ; then 
+		# Will need to use " jq 'map(.name)'" once we have more than one release.
+			REL=$(echo $RESPONSE | jq -r '.[0].tag_name')
+			ID=$(echo $RESPONSE | jq -r '.[0].id')
+			if [ $DEBUG ] ; then echo $REL; fi
+			if [ "$REL" ] ; then line="$line\t$REL($ID)"; 
+			else line="$line\tnone";fi
+			if [ $SHOWCLONEURL ] ; then 
+				URL=$(echo $RESPONSE | jq -r '.[0].url')
+				if [ "$URL" ] ; then line="$line\t$URL"; fi
+			fi
+			if [ $SHOWZIPURL ] ; then 
+				URL=$(echo $RESPONSE | jq -r '.[0].zipball_url')
+				if [ "$URL" ] ; then line="$line\t$URL"; fi
+			fi
+		fi 
+	fi
+	echo -e $line;
+done

git-make-release.sh

@@ -7,7 +7,7 @@
 #
 # 
 if [[ -z $1 ]] ; then
-	echo "************make-release <modulename> <organization> <release> [local] [debug] [noisy]"
+	echo "git-make-release <modulename> <organization> <release> [local] [debug] [noisy] [draft] [prerelease]"
 	exit 0
 fi
 
@@ -19,7 +19,7 @@ if [ ! -e $inifilename ] ; then
   # Not here, look at system default
   if [ ! -e /etc/smegit.ini ] ; then 
     echo "No ini file found $inifiename or /etc/smegit.ini"
-	echo "make-release <modulename> <organization> <release> [local] [debug] [noisy]"
+	echo "git-make-release <modulename> <organization> <release> [local] [debug] [noisy] [draft] [prerelease]"
     exit 1
   else
     initfilename="/etc/smegit.ini"
@@ -48,6 +48,8 @@ GITEAACCESSTOKEN=${remote_GITEAACCESSTOKEN}
 GITEAHOST=${remote_GITEAHOST}
 NOISY=
 EXTRAPARAMS=
+MAKEPRE=false
+MAKEDRAFT=false
 for param in $4 $5 $6; do
   if [ $param ] ; then
     case $param in
@@ -60,6 +62,12 @@ for param in $4 $5 $6; do
 		DEBUG=true ;;
       noisy )
         NOISY=true ;;
+      draft )
+		MAKEDRAFT=true ;;
+	  prerelease )
+	    MAKEPRE=true ;;
+	  draftpre )
+	    MAKEPRE=true;MAKEDRAFT=true ;;
       * )
         EXTRAPARAMS=$EXTRAPARAMS" "$param ;;
     esac
@@ -68,6 +76,7 @@ for param in $4 $5 $6; do
   fi
 done
 
+if [ $DEBUG ] ; then echo "draft:$MAKEDRAFT*pre:$MAKEPRE"; fi
 #check for release tag 
 if [ -z $3 ]; then 
 	echo "Release tag not set";
@@ -101,7 +110,7 @@ RemoteRepoURL="$GITEAHOST/$2/$1"
 if [ $DEBUG ] ; then echo "URL="$RemoteRepoURL; fi
 
 # First see if release exists:
-RESPONSE=$(curl -X 'GET' \
+RESPONSE=$(curl -s -X 'GET' \
   "$GITEAHOST/api/v1/repos/$2/$1/releases/tags/SME$3" \
   -H 'accept: application/json')
 if [ $DEBUG ] ; then echo "See if Release exists response="$RESPONSE; fi
@@ -127,21 +136,56 @@ fi
 if [[ -z "$ID" ]]; then 
 	# Create Release 
 	if [ $NOISY ]; then echo "Creating Release $3 for $2/$1"; fi
-	RESPONSE=$(curl -X 'POST' \
+	# 3 branches 'cos I can't get the ascaping correct for using $MAKEPRE and $MAKEDRAFT in the -d json parameter to curl!
-	  "$GITEAHOST/api/v1/repos/$2/$1/releases" \
+	if [ $MAKEDRAFT = "true" ]; then 
-	  -H 'accept: application/json' \
+		if [ $DEBUG ] ; then echo "$MAKEDRAFT:Creating draft release"; fi
-	  -H "Authorization: token $GITEAACCESSTOKEN" \
+		RESPONSE=$(curl -s -X 'POST' \
-	  -H 'Content-Type: application/json' \
+		  "$GITEAHOST/api/v1/repos/$2/$1/releases" \
-	  -d '{
+		  -H 'accept: application/json' \
-	  "body": "'"1st Release of rpm built from git  - `date` "'",
+		  -H "Authorization: token $GITEAACCESSTOKEN" \
-	  "draft": true,
+		  -H 'Content-Type: application/json' \
-	  "name": "'"$1"'",
+		  -d '{
-	  "prerelease": true,
+		  "body": "'"1st Draft Release of rpm built from git  - `date` "'",
-	  "tag_name": "'SME"$3"'",
+		  "draft": true,
-	  "target_commitish": ""
+		  "name": "'"$1"'",
-	}')
+		  "prerelease": false,
+		  "tag_name": "'SME"$3"'",
+		  "target_commitish": ""}'
+		  );
+	elif [ $MAKEPRE = "true" ]; then 
+		if [ $DEBUG ] ; then echo "Creating pre-release"; fi
+		RESPONSE=$(curl -s -X 'POST' \
+		  "$GITEAHOST/api/v1/repos/$2/$1/releases" \
+		  -H 'accept: application/json' \
+		  -H "Authorization: token $GITEAACCESSTOKEN" \
+		  -H 'Content-Type: application/json' \
+		  -d '{
+		  "body": "'"1st Pre-Release of rpm built from git  - `date` "'",
+		  "draft": false,
+		  "name": "'"$1"'",
+		  "prerelease": true,
+		  "tag_name": "'SME"$3"'",
+		  "target_commitish": ""}'
+		  );
+	else 
+		if [ $DEBUG ] ; then echo "Creating full release"; fi
+		RESPONSE=$(curl -s -X 'POST' \
+		  "$GITEAHOST/api/v1/repos/$2/$1/releases" \
+		  -H 'accept: application/json' \
+		  -H "Authorization: token $GITEAACCESSTOKEN" \
+		  -H 'Content-Type: application/json' \
+		  -d '{
+		  "body": "'"1st Stable Release of rpm built from git  - `date` "'",
+		  "draft": false,
+		  "name": "'"$1"'",
+		  "prerelease": false,
+		  "tag_name": "'SME"$3"'",
+		  "target_commitish": ""}'
+		  );
+	fi
 	# Extract id from release
 	if [ $DEBUG ]; then echo "Create Release response="$RESPONSE; fi
+	exit 0
 	ID=$(echo $RESPONSE | jq -r '.id')
 	if [[ -z $ID ]] ; then 
 		echo "Unable to create release for $2/$1 ($3)"
@@ -151,14 +195,14 @@ else
 	if [ $NOISY ]; then echo "Found Release $ID for $2/$1 ($3)"; fi
 fi
 if [ $DEBUG ] ; then echo "ID:"$ID; fi
-
+exit 0 
 # And use it to upload the rpm and src rpm
 cd $WORKDIR/$2/$1
 # Got to cd to rpm directory here
 RPMDIR=$(ls $(basename `pwd`)*.rpm | sort | head -n  1 | sed 's/.src.rpm//' | sed 's/\./_/g')
 echo $RPMDIR
 # List the existing attachments
-ASSETSRESPONSE=$(curl -X 'GET' \
+ASSETSRESPONSE=$(curl -s -X 'GET' \
   "$GITEAHOST/api/v1/repos/$2/$1/releases/$ID/assets" \
   -H 'accept: application/json')
 if [ $DEBUG ]; then echo "Asset response:"$ASSETSRESPONSE; fi
@@ -179,7 +223,7 @@ for File in $(ls $RPMDIR/*.rpm) ; do
 		#echo "ATTID:"$ATTID
 		ATTID=$(echo $ATTID | sed 's/\[//' | sed 's/\]//' | sed 's/ //g')
 		if [ $DEBUG ]; then echo "ATTID:"$ATTID; fi
-		RESPONSE=$(curl -X 'DELETE' \
+		RESPONSE=$(curl -s -X 'DELETE' \
 			"$GITEAHOST/api/v1/repos/$2/$1/releases/$ID/assets/$ATTID" \
 			-H "Authorization: token $GITEAACCESSTOKEN" \
 			-H 'accept: application/json')
@@ -195,7 +239,7 @@ for File in $(ls $RPMDIR/*.rpm) ; do
 	# Then send current version 
 	FULLFILENAME=$FULLPATH/$File
 	if [ $DEBUG ] ; then echo $FULLFILENAME; fi
-	RESPONSE=$(curl -X 'POST' \
+	RESPONSE=$(curl -s -X 'POST' \
 	"$GITEAHOST/api/v1/repos/$2/$1/releases/$ID/assets?name=$BASEFile" \
 	-H 'accept: application/json' \
 	-H "Authorization: token $GITEAACCESSTOKEN" \