#!/bin/bash
#
# $1 = Module name e.g. smeserver-ddclient
# $2 = Organisation (smeserver or smecontrib)e
# optional (can be in any order)
#   <local> will use parameters set for local repository else it will use remote
#   <debug> turn on debug regardless of ~/.smegit/config
#   <noisy> print a line showing how it was called
# This works whether the repo and local files exist of not (it deletes them if necessary)
# However if the remote repo exists, it preserves the README.md file so that edits are not lost
# Also note: I have had difficulty deleting all the link files in the source tree!
#

if [[ -z $1 ]] ; then
	echo "************git-cvs2git.sh <modulename> <organization> [<local>]"
	exit 0
fi

#
# Pull in parameters from a config file ~/.smegit/config
#
inifilename=$(echo ~)"/.smegit/config"
if [ ! -e $inifilename ] ; then
  # Not here, look at system default
  if [ ! -e /etc/smegit.ini ] ; then 
    echo "No ini file found $inifiename or /etc/smegit.ini"
    echo "git-cvs2git.sh <modulename> <organization> [<local>]"
    exit 1
  else
    initfilename="/etc/smegit.ini"
  fi
fi 

while read -r line || [[ -n "$line" ]]; do
    if [[ $line =~ ^\[.*\]$ ]]
    then
        section=${line#*[}
        section=${section%]*}
    else
        if [[ $line =~ ^[^#]*= ]]
        then
            key=${line%=*}
            value=${line#*=}
            declare "${section}_${key}=$value"
        fi
    fi
done < "$inifilename"
DEBUG=
if [ ${smegit_DEBUG} == "true" ] ; then DEBUG=true ; fi

GITEAUser=${remote_USER}
GITEAACCESSTOKEN=${remote_GITEAACCESSTOKEN}
GITEAHOST=${remote_GITEAHOST}
NOISY=
EXTRAPARAMS=
for param in $3 $4 $5 $6; do
  if [ $param ] ; then
    case $param in
	  local )
    	GITEAUser=${local_USER}
    	GITEAACCESSTOKEN=${local_GITEAACCESSTOKEN}
    	GITEAHOST=${local_GITEAHOST}
		;;
	  debug )
		DEBUG=true ;;
      noisy )
        NOISY=true ;;
      * )
        EXTRAPARAMS=$EXTRAPARAMS" "$param ;;
    esac
  else
	  break
  fi
done

if [ $NOISY ] ; then echo "git-cvs2git.sh $1 $2 $3 $4 $5 $6" ; fi
if [ $DEBUG ] ; then echo "************found ini file: $inifilename" ; fi
# Make this null if you want lots of output. Still quite a bit anyway
QUIET="-q"
curlsilent="-s"
suppress=" &> /dev/null"
if [ $DEBUG ] ; then 
	QUIET=
	curlsilent="-v"
	suppress=
fi
# Make this null to get curl to check ssl cert
checkSSL="-k"

LOCALUser=${local_USER}
if [[ $smegit_WORKDIR == ~* ]] ; then
    # relative to users home dir
    WORKDIR=$(echo ~)${smegit_WORKDIR:1}
else
    # absolute path
    WORKDIR=${smegit_WORKDIR}
fi
if [ $DEBUG ] ; then echo "WORKDIR=$WORKDIR" ; fi
RemoteRepoURL="$GITEAHOST/$2/$1"

#
# Unless you have changed this, this (below) is my (brian) OpenAI token, but happy to use it here, it costs peanuts!
# unless you delete the repo in between duplicate runs, then the README.md is preserved, so the ChatGPT is only called once.
# but it means you can edit the results on gitea without fear of loosing your edits if the repo is re-created using this script
#
export OPENAI_API_KEY=${smegit_OPENAI_API_KEY}
COMMONREPO=${smegit_COMMONREPO}

# Name is re-initialised later on from the spec file
NAME=$1

# Prepare variable for file in repo to indicate core or contrib.
# and init gitea organisation 
# Adjust where we put the repo locally accordingly.
ORGGITEA=$2
if [[ "$2" == "smecontribs" ]]; then
  BASEORCONTRIB="contribs10"
  PRODUCTBUGZILLA="SME%20Contribs"
else
  BASEORCONTRIB="sme10"
  PRODUCTBUGZILLA="SME%20Server%2010.X"
fi  

# Work out if it is an SMEServer package or a 3rd party one
if [[ "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
  PACKAGETYPE="SMEServer Koozali developed"
else
  PACKAGETYPE="3rd Party (Maintained by Koozali)"
fi  

# Check that git-lfs is installed
if command -v git-lfs > /dev/null; then
    if [ $DEBUG ] ; then echo "************Git LFS is installed" ; fi
else
    echo "ERROR********************** Git LFS is not installed ******************"
    exit 1
fi

# Check that jq is installed
if command -v jq -V > /dev/null; then
    if [ $DEBUG ] ; then echo "************Jq is installed" ; fi
else
    echo "ERROR********************** jq is not installed (try EPEL)**************"
    exit 1
fi

# and check for the special scripts - changelog and BogusDateBot.sh - I think these are available in the
# mockbuild rpm, but beware Bug:12340 - changelog needs an edit to work!
if type -P change-log >/dev/null 2>&1; then
  if [ $DEBUG ] ; then echo "************change-log is installed" ; fi
else
  echo "ERROR********************change-log is not installed*********** (try installing smeserver-mockbuild)"
fi
if [ $DEBUG ] ; then echo "************..and also note bug:12340" ; fi

if type -P BogusDateBot.sh >/dev/null 2>&1; then
  if [ $DEBUG ] ; then echo "************BogusDateBot.sh is installed"; fi
else
  echo "ERROR********************BogusDateBot.sh is not installed*********** (try installing smeserver-mockbuild)"
fi

# Create work directories
cd $WORKDIR
CVSFiles="$WORKDIR/$2/rpms"
#echo $CVSFiles
mkdir -p $CVSFiles

# Make sure credentials taken from store
# The first time you pull or push it will ask for credentials and then save them in a file.
git config --global credential.helper store

#
# Clone the CVS repository
#
cd $CVSFiles
# First delete any existing module directory tree
# if there at all 
if [ -d "$1" ] ; then
	if [ $DEBUG ] ; then echo "************Deleting local CVS files" ; fi
	rm -Rf $CVSFiles/$1
fi

# Then get it fully from CVS
cd $CVSFiles
cvs -d:ext:shell.koozali.org:/cvs/$2 $QUIET checkout $1

# Check that the spec file is there
# First bet is the packagename.spec
SPECFILE=$1/$BASEORCONTRIB/$1.spec
ORIGSPECFILE=$SPECFILE
GOTONE=0
if [ ! -f  $SPECFILE ] ; then
	# See if it is a perl package which has the perl or perl-pear taken off the front
	for front in "perl-" "perl-pear-" ; do
		reg="^($front).*"
		echo "$front $1 $reg"
		if [[ "$1" =~ $reg ]]; then
		    NEWNAME="${1#$front}"
		    #echo $NEWNAME
			SPECFILE="$1/$BASEORCONTRIB/$NEWNAME.spec"
			#echo $SPECFILE
			if [ -f  $SPECFILE ] ; then
				GOTONE=1
			    break
			fi
		fi
	done
	# Otherwise, just pull out the first spec file in the directory
	cd $1/$BASEORCONTRIB
	SPECFILE=$(ls *.spec | head -n 1)
	SPECFILE=$1/$BASEORCONTRIB/$SPECFILE
	cd $CVSFiles
	echo '2nd try: '$SPECFILE
	if [ -f  $SPECFILE ] ; then
		GOTONE=1
		ORIGSPECFILE=$SPECFILE
	fi
else
	GOTONE=1
fi

if [[ $GOTONE -eq 0 ]] ; then 
  echo "Cannot find .spec file: `pwd`/$ORIGSPECFILE"
  exit 1
fi

# Create the local Git repository
GITFiles=$WORKDIR/GITFiles/$ORGGITEA
mkdir -p $GITFiles
cd $GITFiles

# Delete the local first
if [ -d "$1" ] ; then
	if [ $DEBUG ] ; then echo "************Deleting local GIT files" ; fi
	rm -Rf $GITFiles/$1
fi

# See if it exists on the Gitea host
REPO_NAME=$1
if [ $DEBUG ] ; then echo "check that $GITEAHOST/$ORGGITEA/$REPO_NAME exists" ; fi
READMECONTENTS=
RESPONSE=$(curl $checkSSL $curlsilent -o /dev/null -w "%{http_code}" "$GITEAHOST/api/v1/repos/$ORGGITEA/$REPO_NAME")
if [ "$RESPONSE" == "200" ]; then
    if [ $DEBUG ] ; then echo "************Repository for $1 already exists!" ; fi
	# If so, clone it (just want the README.md)
    if [ $DEBUG ] ; then echo "git clone $GITEAHOST/$ORGGITEA/$1.git" ; fi
	cd $GITFiles
	git clone "$GITEAHOST/$ORGGITEA/$1.git" $suppress
	if [[ -f $GITFILES/$1/README.md ]] ; then
		# Move it and remember its new (temp) name
		READMECONTENTS=`mktemp`
		mv -f README.md "$READMECONTENTS"
	fi
	# Now delete the repo, re-create it and clone it in to local
	if [ $DEBUG ] ; then echo "Delete $ORGGITEA/$1" ; fi
	RESPONSE=$(curl "$checkSSL" "$curlsilent" -o /dev/null -w "%{http_code}" -X 'DELETE' \
		"$GITEAHOST/api/v1/repos/$ORGGITEA/$1" \
		-H 'accept: application/json' \
		-H "Authorization: token $GITEAACCESSTOKEN")
	if [[ $RESPONSE == "204" || $RESPONSE == "404" ]] ; then
		if [ $DEBUG ] ; then echo "************Repository $ORGGITEA/$1 deleted or does not exist" ; fi
	else	
		echo "************Can NOT delete Repository $ORGGITEA/$1 - results will be unknown - Aborting!"
		echo "RESPONSE=$RESPONSE"
		exit 1
	fi
	# Delete all files, links and directories
	if [ $DEBUG ] ; then echo "************Deleting local GIT files" ; fi
	cd $GITFiles
	rm -Rf $GITFiles/$1
else
    if [ $DEBUG ] ; then echo "************Repository for $1 does not exist." ; fi
fi

cd $GITFiles
#git init $QUIET $1

#
# Re-create the repo
#
if [ $DEBUG ] ; then echo "************Creating repo for $1 $PACKAGETYPE" ; fi
RESPONSE=$(curl "$checkSSL" "$curlsilent" -X 'POST' \
	"$GITEAHOST/api/v1/orgs/$ORGGITEA/repos"   \
	-H 'accept: application/json'   \
	-H "Authorization: token $GITEAACCESSTOKEN" \
	-H 'Content-Type: application/json'   \
	-d '{
			"auto_init": true,
			"default_branch": "master",
			"description": "'"$PACKAGETYPE git repo for $1 $2"'",
			"gitignores": "",
			"issue_labels": "Default",
			"license": "Apache-2.0",
			"name": "'"$1"'",
			"private": false,
			"readme": "Default",
			"template": false,
			"trust_model": "Default Trust Model"
	}')
if [ $DEBUG ] ; then echo $RESPONSE ; fi

# and extract the http URL for it
HTTP_URL=`echo $RESPONSE | jq -r '.html_url'`

if [ $DEBUG ] ; then echo $HTTP_URL ; fi
if [[ -z "${HTTP_URL}"  ]]; then
	echo "ERROR*******Repo for $1 appears NOT to have been created "
	echo "$RESPONSE"
	exit 1
fi 

# And check it now exists
RESPONSE=$(curl "$curlsilent" -o /dev/null -w "%{http_code}" "$GITEAHOST/api/v1/repos/$ORGGITEA/$1")
if [[ "$RESPONSE" == "200" ]]; then
    if [ $DEBUG ] ; then echo "************Repository for $1 exists" ; fi
else
    echo "ERROR*******Repository for $1 has not been created ($RESPONSE)"
    exit 1
fi

# Pull in the auto created or updated files
cd $GITFiles
#GIT_SSL_NO_VERIFY=true git clone "$GITEAHOST/$ORGGITEA/$1.git" 
git clone "$GITEAHOST/$ORGGITEA/$1.git"

if [ ! -d $GITFiles/$1 ] ; then 
  echo "ERROR*******Unable to access the new repo directory for $HTTP_URL $GITFiles/$1"
  exit 1
fi

cd $CVSFiles/$1/$BASEORCONTRIB

# Fully populate the directory (gets the tar file - which is not strictly in CVS) and creates the directory source tree
# applying the patches to the base in the tar file.
# Might need to replace this by the code from the makefile if we decide to move "make prep" to git moe likely we'll implement a new one "make gitprep".
make prep $suppress

# Extract the directory name for the file tree (it will include the name of the module plus some version information)
# Same trick that we use in the makefile.common  - taking the name and verison from the .spec file.
NAME=`ls *.spec|sed 's/\.spec//'`
VERSION=`rpm --queryformat '%{version}\n' --specfile $NAME.spec | head -n 1`
TREEPATH=$NAME-$VERSION
CODEDIR="root"
EXT=$(cat "$(basename $SPECFILE)" | grep -i ^Source | head -n 1 | sed -r 's/^[S|s]ource[0..9]?:\s?//' | xargs basename | sed -E 's/^([^.]*\.)(.*)$/\2/')
#echo $EXT $SPECFILE $(basename $SPECFILE) `pwd`
#exit 0
ARCHIVEFILE=$(cat "$(basename $SPECFILE)" | grep ^Source | head -n 1 | sed -r 's/^[S|s]ource[0..9]?:\s?//' | xargs basename)
ARCHIVEFILE=$(rpm --queryformat "$ARCHIVEFILE\n" --specfile "$(basename $SPECFILE)" | head -n 1)

if [ $DEBUG ] ; then echo $ARCHIVEFILE $EXT $SPECFILE ; fi

# Check that we got the filename (possible define in it not expanded?)
if [ ! -f $ARCHIVEFILE ]; then
	# Try another tack
	if [ $DEBUG ] ; then echo "************File $ARCHIVE does not exist - trying *.$EXT" ; fi
	ARCHIVEFILE=`ls *.$EXT | head -n 1`
	if [[ ! -f $ARCHIVEFILE || -z $ARCHIVEFILE ]]; then
		echo "ERROR*******Can't identify archive file $ARCHIVEFILE $EXT `pwd`"
		exit 1
	fi
fi
if [ $DEBUG ] ; then echo "************TreePATH:$TREEPATH and Archivefile:$ARCHIVEFILE `pwd`" ; fi

# pull in all the files we want
cd $GITFiles/$1

# Add file indicating which release and contribs or base - this is matched by the makefile with the contents of the branch file in the common directory
# to give the details of the release (EL7/8/9/ etc)
# This assumes SME10 and contribs10 or sme10 directory names, later releases can update the value in the file and Makefile should still work.
echo $BASEORCONTRIB > contriborbase

# Note that e-smith-backup base module has "Copying" not in all caps - seems to be the only one not in line.
BASESPECFILE=$(basename $SPECFILE)
for fpath in  "$BASESPECFILE"  "Makefile" 
do 
    if [ $DEBUG ] ; then echo "************Copying $CVSFiles/$1/$BASEORCONTRIB/$fpath" ; fi
    if [[ -f $CVSFiles/$1/$BASEORCONTRIB/$fpath ]] ; then 
		cp -R $CVSFiles/$1/$BASEORCONTRIB/$fpath .
	else
		echo "ERROR*******Expected to find $fpath in $CVSFiles/$1/$BASEORCONTRIB"
		exit 1
	fi
done

# and see if the spec file is not according to specification of <packagename>.spec
# if not rename it
if [[ $SPECFILE != $ORIGSPECFILE ]] ; then
   if [ $DEBUG ] ; then echo "************Renaming specfile from $(basename $SPECFILE) $(basename $ORIGSPECFILE)" ; fi
   mv "$(basename $SPECFILE)" "$(basename $ORIGSPECFILE)"
   SPECFILE=$ORIGSPECFILE
fi

if [[ ! "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
	
	# add in the patches (a 3rd party package)
	# it turns out that not all patches end in .patch, so extract the file names out of the spec file as per sources below
	PATCHS=$(grep -i -E '^patch[0-9]*:' $(basename $SPECFILE) | cut -d: -f2- | sed 's/ //g')
	if [ $DEBUG ] ; then echo "$PATCHS" ; fi

	for fpath in $PATCHS; do
		# Needs another step incase the extraction from the spec file contains spec variables
		fpathfile=$(basename $fpath)
		if [ $DEBUG ] ; then echo "$fpathfile" ; fi
		translatefpath=$(rpm --queryformat "$fpathfile\n" --specfile $(basename $SPECFILE) | head -n 1)
		if [ $DEBUG ] ; then echo "$translatefpath" ; fi
		if [[ -f $CVSFiles/$1/$BASEORCONTRIB/$translatefpath ]] ; then 	
			if [ $DEBUG ] ; then echo "************Copying $CVSFiles/$1/$BASEORCONTRIB/$translatefpath" ; fi
			cp $CVSFiles/$1/$BASEORCONTRIB/$translatefpath . 
		else
			if [ $DEBUG ] ; then echo "************Not found $CVSFiles/$1/$BASEORCONTRIB/$translatefpath ( $fpathfile )- so not copied" ; fi
		fi
	done

	#for fpath in  "*.patch"                  
	#do 
		#echo "************Copying $CVSFiles/$1/$BASEORCONTRIB/$fpath"
		#cp -R $CVSFiles/$1/$BASEORCONTRIB/$fpath .
	#done
	
	# See if the spec file needs an extra buildrequires (nothing to do with git! - things have changed since SME10.1)
	# if the spec file includes "BuildRequires:  perl(ExtUtils::MakeMaker)" and NOT "BuildRequires:  perl(ExtUtils::Manifest)" then add the latter
	if grep -q "^BuildRequires:.*perl(ExtUtils::MakeMaker)" "$(basename $SPECFILE)" && ! grep -q "^BuildRequires:.*perl(ExtUtils::Manifest)" "$(basename $SPECFILE)"; then
		sed -i '/^BuildRequires:.*perl(ExtUtils::MakeMaker)/a BuildRequires: perl(ExtUtils::Manifest)' "$(basename $SPECFILE)"
		if [ $DEBUG ] ; then echo "************Added 'BuildRequires: perl(ExtUtils::Manifest)' to the spec file." ; fi
	else
		if [ $DEBUG ] ; then echo  "************No action was taken. The spec file either does not include 'BuildRequires: perl(ExtUtils::MakeMaker)' or already includes 'BuildRequires: perl(ExtUtils::Manifest)'." ; fi
	fi
	
	# and similar for another ExtUtils package - ParseXS
	if grep -q "^BuildRequires:.*perl(ExtUtils::MakeMaker)" "$(basename $SPECFILE)" && ! grep -q "^BuildRequires:.*perl(ExtUtils::ParseXS)" "$(basename $SPECFILE)"; then
		sed -i '/^BuildRequires:.*perl(ExtUtils::MakeMaker)/a BuildRequires: perl(ExtUtils::ParseXS)' "$(basename $SPECFILE)"
		if [ $DEBUG ] ; then echo "************Added 'BuildRequires: perl(ExtUtils::ParseXS)' to the spec file." ; fi
	else
		if [ $DEBUG ] ; then echo  "************No action was taken. The spec file either does not include 'BuildRequires: perl(ExtUtils::MakeMaker)' or already includes 'BuildRequires: perl(ExtUtils::ParseXS)'." ; fi
	fi
	
	# and similar for another devel package - needs manifest 
	if grep -q "^BuildRequires:.*perl-devel" "$(basename $SPECFILE)" && ! grep -q "^BuildRequires:.*perl(ExtUtils::Manifest)" "$(basename $SPECFILE)"; then
		sed -i '/^BuildRequires:.*perl-devel/a BuildRequires:  perl(ExtUtils::Manifest)' "$(basename $SPECFILE)"
		if [ $DEBUG ] ; then echo "************Added 'BuildRequires: perl(ExtUtils::Manifest)' to the spec file." ; fi
	else
		if [ $DEBUG ] ; then echo  "************No action was taken. The spec file either does not include 'BuildRequires: perl-devel' or already includes 'BuildRequires:  perl(ExtUtils::Manifest)'." ; fi
	fi
	
	# Fix the rm in the pear packages - .filemap is no longer part of the download
	if grep -q "^rm %{buildroot}/%{peardir}/.filemap" "$(basename $SPECFILE)"; then
		sed -i 's/^rm *\%/rm -rf %/' "$(basename $SPECFILE)"
		if [ $DEBUG ] ; then echo "************Added 'rm -rf %{buildroot}/%{peardir}/.filemap' to the spec file." ; fi
	else
		if [ $DEBUG ] ; then echo  "************No action was taken. The spec file either does not include 'rm %{buildroot}/%{peardir}/.filemap' or already includes it" ; fi
	fi

	
fi

## and there may be extra files that maybe needed, these can be identified from the "Source" spec in the .spec files
SOURCES=$(grep -i -E '^Source[0-9]*:' $(basename $SPECFILE) | cut -d: -f2- | sed 's/ //g')
if [ $DEBUG ] ; then echo "$SOURCES" ; fi

#SOURCE=$(rpm --queryformat '$SOURCE\n' --specfile $SPECFILE | head -n 1)
for fpath in $SOURCES; do
	# Needs another step incase the extraction from the spec file contains spec variables
	fpathfile=$(basename $fpath)
	if [ $DEBUG ] ; then echo "$fpathfile" ; fi
	translatefpath=$(rpm --queryformat "$fpathfile\n" --specfile $(basename $SPECFILE) | head -n 1)
	if [ $DEBUG ] ; then echo "$translatefpath" ; fi
	if [[ -f $CVSFiles/$1/$BASEORCONTRIB/$translatefpath ]] ; then 	
		if [ $DEBUG ] ; then echo "************Copying $CVSFiles/$1/$BASEORCONTRIB/$translatefpath" ; fi
		cp $CVSFiles/$1/$BASEORCONTRIB/$translatefpath . 
	else
		if [ $DEBUG ] ; then echo "************Not found $CVSFiles/$1/$BASEORCONTRIB/$translatefpath ( $fpathfile )- so not copied" ; fi
	fi
done

# Take out the logs and rpms from the git save
echo "*.rpm" >> .gitignore
echo "*.log" >> .gitignore
# and the backed up spec file from BogusDateBot.sh
echo "*spec-20*" >>.gitignore

cd $GITFiles/$1
# See if the package is a 3rd party or one of ours - indicated by "smeserver" or "e-smith" in the name
if [[ "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
	# one of ours
	if [ $DEBUG ] ; then echo "************Found SMEServer source for $NAME" ; fi
	# Create the .gitignore file to ignore the archive
	echo "*.$EXT" >> .gitignore
	#and copy in the source tree
	mkdir -p "$CODEDIR"
	if [ $DEBUG ] ; then echo "************Copying $CVSFiles/$1/$BASEORCONTRIB/root `pwd`/$CODEDIR" ; fi
	rsync "$QUIET" -a --no-prune-empty-dirs "$CVSFiles/$1/$BASEORCONTRIB/$TREEPATH/root/" "`pwd`/$CODEDIR/"
	# copy createlinks to base
	if [ -e "$CVSFiles/$1/$BASEORCONTRIB/$TREEPATH/createlinks" ] ; then cp "$CVSFiles/$1/$BASEORCONTRIB/$TREEPATH/createlinks" "`pwd`/." ; fi
	# copy anything else in the base directory of $TREEPATH into the additional directory
	if [ ! -d "`pwd`/additional" ] ; then mkdir -p "`pwd`/additional" ; fi
	rsync "$QUIET" -av --exclude "createlinks" --exclude "root/" "$CVSFiles/$1/$BASEORCONTRIB/$TREEPATH/" "`pwd`/additional/"
	# and plug a dummy into any empty directories
	find "`pwd`/root"/* -type d -empty -exec touch {}/.gitignore \;
else
	# Third party package
	# copy over the archive file and make sure the extension is tracked by git-lfs
	if [ $DEBUG ] ; then echo "************Found 3rd party package $NAME" ; fi
	git lfs install $QUIET
	git lfs track "*.$EXT" $QUIET
	git add .gitattributes $QUIET
	#git config lfs.http://gitea.bjsystems.co.uk/SMEContribs/bugzilla.git/info/lfs.locksverify true
	if [[ -f $CVSFiles/$1/$BASEORCONTRIB/$ARCHIVEFILE ]] ; then 
		if [ $DEBUG ] ; then echo "************Copying archivefile $CVSFiles/$1/$BASEORCONTRIB/$ARCHIVEFILE" ; fi
		cp $CVSFiles/$1/$BASEORCONTRIB/$ARCHIVEFILE . 
	else
		if [ $DEBUG ] ; then echo "Unable to find archivefile: $CVSFiles/$1/$BASEORCONTRIB/$ARCHIVEFILE - nothing copied" ; fi
	fi
	cd $GITFiles/$1
fi

cd $GITFiles/$1
if [[ $ARCHIVEFILE != "$TREEPATH.tar.gz" ]] ; then
    echo "$ARCHIVEFILE" > archivefilename
fi

# Take out any bogus dates:
/usr/bin/BogusDateBot.sh $(basename $SPECFILE) $suppress

# If it is an SME package, take out the patches and then update the release.
if [[ "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
	# Now edit the spec file to remove all those patches and adjust the paths
	sed -i '/^Patch/d; /^%patch/d' $(basename $SPECFILE)
	# no paths need adjusting at this time!
	# Bump the release and add changelog
	change-log $(basename $SPECFILE) $suppress
	# and edit in the reason 
	# sed  - TBD  - to look for "fix [SME: ]"
	sed -i 's/fix \[SME: \]/Roll up patches and move to git repo \[SME: 12338\]/' $(basename $SPECFILE)
	sed -i 's/ME MYSELF <myemail@koozali.org>/cvs2git.sh aka Brian Read <brianr@koozali.org>/' $(basename $SPECFILE)
	# Add in the autochangelog and autorelease macros into the spec file
	# Commented out for now until we have build systems that can install the rpmautospec package (CEntos, Rocky etc V9 only so far)
#	sed -i 's/Release:.*/Release: %autorelease/' $(basename $SPECFILE)
	# and add in the autochangelog if it is not already there
#	sed -i '/^%changelog$/a %autochangelog' $(basename $SPECFILE)
	# Note that the Readme.md is updated below once the repo has been created
fi

## Clone the common directory - delete the contents first
#cd $GITFiles/$1
#if [ -d common ] 
#then
	#find common -delete
#fi
#git clone "${smegit_COMMONREPO}"

## Make sure common directory go created
#if [ ! -e $GITFiles/$1/common ]; then 
  #echo "ERROR*******No Common directory after git clone"
  #exit 1
#fi
## and delete the .git else it pushes back a link to this repo in the new repo
#cd $GITFiles/$1/common
#rm -fr ".git"
## and set the make-archive.sh executible - this needs to be done on any git clone - not sure how or where.
#chmod +x make-archive.sh

# Re-factor the Common directory so that it is outside the repo being created.
# one Common directory for each Organisation
# 
# See if it already exists
if [ ! -e $GITFiles/common ]; then
  #Get it
  cd $GITFiles
  git clone "${smegit_COMMONREPO}" $QUIET
  if [ ! -e $GITFiles/common ]; then
    echo "ERROR*******No Common Repo found - package $1"
    exit 1
  fi
else
  # Just refresh it
  cd $GITFiles/common
  git pull $QUIET
fi 

# Now make sure that the make-archive is executible
chmod +x $GITFiles/common/make-archive.sh

# Edit the Readme.md - try to add a link to the wiki for this package - only if it is an SME package
cd $GITFiles/$1
if [ $DEBUG ] ; then echo "************READMECONTENTS:$READMECONTENTS" ; fi
PACKAGENAME=${NAME}
if [[ "$NAME" =~ ^(smeserver-|e-smith-).* ]]; then
	# See if we have a previous contents of the README.md
	if [[ "$NAME" =~ ^(smeserver-).* ]]; then
		PACKAGENAME=${NAME#smeserver-}
	fi

	# first find the relevant wiki entry

	MEDIAWIKI_SITE="https://wiki.koozali.org/api.php"
	SEARCH_TERM="$PACKAGENAME"

	# Call the API to perform the search and store the JSON response in a variable
	RESPONSE=$(curl -s "$MEDIAWIKI_SITE?action=query&format=json&list=search&srsearch=${SEARCH_TERM}&srprop=size%7Cwordcount%7Ctimestamp%7Csnippet&srlimit=10")

	# Use jq to extract the titles and pageids of the pages that match the search term (case-insensitive)
	RESULTS=$(echo "$RESPONSE" | jq -r '.query.search[] | select(.title | ascii_downcase | contains("'"${SEARCH_TERM}"'" | ascii_downcase)) | .title, .pageid')

	# Loop through the results and construct the URL for each page
	URLS=$(while read -r TITLE; do \
		read -r PAGEID; \
		URL="https://wiki.koozali.org/${TITLE}"; \
		URL=$(echo $URL | sed 's/ /_/g'); \
		echo "<br />${URL}"; \
	done <<< "${RESULTS}" )
	# and get the first non french (sorry JP!)
	WIKILINK=$(while read -r TITLE; do \
		read -r PAGEID; \
		URL="https://wiki.koozali.org/${TITLE}"; \
		URL=$(echo $URL | sed 's/ /_/g'); \
		if [[ ! "$URL" =~ 'fr' ]] ; then echo "${URL}"; break; fi \
	done <<< "${RESULTS}" )

    if [[ "$READMECONTENTS" == "" ]]; then
        # nothing previous    
		# Copy across the Wiki links to the README
		if [ ! "$URLS" = "" ]; then
			if [ $DEBUG ] ; then echo "************The wiki page(s) for $PACKAGENAME exist." ; fi
			echo -en "\n\n## Wiki\n$URLS" >> README.md
		fi
		
		# And add bugzilla link
		echo -en "\n\n## Bugzilla" >> README.md
        echo -en "\nShow list of outstanding bugs: [here](https://bugs.koozali.org/buglist.cgi?component=$1&product=$PRODUCTBUGZILLA&query_format=advanced&limit=0&bug_status=UNCONFIRMED&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&bug_status=CONFIRMED)" >> README.md
		# Edit the header to add the logo
		#KOOZALILOGO='<img src="http:\/\/vps.bjsystems.co.uk\/KoozaliLogo4GiteaRepo.png" style="vertical-align:bottom">'
		KOOZALILOGO='<img src="https:\/\/www.koozali.org\/images\/koozali\/Logo\/Png\/Koozali_logo_2016.png" width="25%" vertical="auto" style="vertical-align:bottom">'
		if [[ "$NAME" =~ ^(smeserver-).* ]]; then
			sed -i "s/^# smeserver/# $KOOZALILOGO smeserver/" README.md
		else
			sed -i "s/^# e-smith/# $KOOZALILOGO e-smith/" README.md
		fi
		# Good to extract some of the wiki here, and load it into the readme, 
		# OR I could ask GPTChat to write me paragraph on the contrib 8-))
		# Set the parameters for the request
		if [[ "$NAME" =~ ^(smeserver-).* && "$2" == "smecontribs" ]]; then
			prompt="Write me a paragraph on the $PACKAGENAME software contrib for smeserver"
		else
			prompt="Write me a paragraph about the software $PACKAGENAME"
		fi
		model="text-davinci-003"
		temperature=0.8
		# Send the request to the API
		response=$(curl "$curlsilent" -X POST https://api.openai.com/v1/engines/$model/completions \
			 -H "Content-Type: application/json" \
			 -H "Authorization: Bearer $OPENAI_API_KEY" \
			 -d '{"prompt": "'"$prompt"'", "temperature": 0.8, "max_tokens": 256}')
		# Extract the text from the response
		PARAGRAPH=`echo $response | jq -r '.choices[].text'`
		# Add it to what was there already
		if [ $DEBUG ] ; then echo "************Creating description for $1" ; fi
		echo -e "\n\n## Description\n" >> README.md
		echo -e "<br />*This description has been generated by an LLM AI system and cannot be relied on to be fully correct.*" >> README.md
		echo -e "*Once it has been checked, then this comment will be deleted*" >> README.md
		echo -e "<br />$PARAGRAPH" >> README.md
	else
	    # overwrite with previous contents
	    if [ $DEBUG ] ; then echo "************Picked up previous README contents" ; fi
	    mv -f $READMECONTENTS ./README.md
	fi
else
    if [ "$READMECONTENTS" == "" ]; then 
		# Add in at least a description 
		prompt="Tell me what the software package $PACKAGENAME does?"
		model="text-davinci-003"
		temperature=0.8
		# Send the request to the API
		response=$(curl "$curlsilent" -X POST https://api.openai.com/v1/engines/$model/completions \
			 -H "Content-Type: application/json" \
			 -H "Authorization: Bearer $OPENAI_API_KEY" \
			 -d '{"prompt": "'"$prompt"'", "temperature": 0.8, "max_tokens": 256}')
		# Extract the text from the response
		PARAGRAPH=`echo $response | jq -r '.choices[].text'`
		# Add it to what was there already
		if [ $DEBUG ] ; then echo "************Creating description for $1" ; fi
		echo -e "\n\n## Description\n" >> README.md
		echo -e "<br />*This description has been generated by an LLM AI system and cannot be relied on to be fully correct.*" >> README.md
		echo -e "*Once it has been checked, then this comment will be deleted*" >> README.md
		echo -e "<br />$PARAGRAPH" >> README.md
	else
	    # overwrite with previous contents
	    if [ $DEBUG ] ; then echo "************Picked up previous README contents" ; fi
	    mv -f $READMECONTENTS ./README.md
	fi
fi

# Tell repo to use koozali.org bugzilla and wiki - this does not work on CREATE currently - 19Apr2023
if [[ -z $WIKILINK ]] ; then 
	WIKILINK="https://wiki.koozali.org"
fi

# and then update the repo parameters
RESPONSE=$(curl "$curlsilent" -X 'PATCH'   "$GITEAHOST/api/v1/repos/$ORGGITEA/$REPO_NAME"   \
	-H 'accept: application/json'   \
	-H "Authorization: token $GITEAACCESSTOKEN" \
	-H 'Content-Type: application/json'   \
	-d '{
			"external_tracker": {
				"external_tracker_format": "https://bugs.koozali.org/show_bug.cgi?id={index}",
				"external_tracker_style": "numeric",
				"external_tracker_url": "'"https://bugs.koozali.org/buglist.cgi?component=$REPO_NAME&product=$PRODUCTBUGZILLA"'"
			},
			"external_wiki": {
				"external_wiki_url": "'"$WIKILINK"'"
			}
		}
	')
# should check response here.
if [ $DEBUG ] ; then echo $RESPONSE ; fi
#exit 0

cd $GITFiles/$1
# stage and commit all the files created locally
git add -A
echo "$1 git status" >>gitstatus.log
git status >>gitstatus.log
if [ $DEBUG ] ; then git status ; fi
COMMENT="initial commit of file from CVS for $1 on `date`"
git commit -m  "$COMMENT" $QUIET

# push the converted git repository to the remote
git remote remove origin
git remote add origin "$GITEAHOST/$ORGGITEA/$1.git"
#GIT_SSL_NO_VERIFY=true git push --force -u $QUIET origin master
git push --force -u $QUIET origin master

# Now create the version and release tag for these files
RELEASE=`rpm --queryformat '%{release}\n' --specfile $NAME.spec | head -n 1`
TAG=$VERSION-$RELEASE
git tag -a $TAG -m "$COMMENT"
git push origin $TAG $QUIET

echo "Created $1 Repo: $HTTP_URL - Comment:$COMMENT tag:$TAG"
exit 0