smeserver-locale/additional/po/zh_CN/server-console.po

1480 lines
68 KiB
Plaintext
Raw Permalink Normal View History

msgid ""
msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_CN\n"
"Plural-Forms: nplurals=1; plural=0;\n"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:16
msgid "Manage disk redundancy"
msgstr "管理磁盘冗余"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:42
msgid "Disk redundancy status as of"
msgstr "磁盘冗余状态"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:43
msgid "Current RAID status:"
msgstr "当前RAID状态"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:52
msgid "There are no RAID devices configured"
msgstr "暂无RAID设备配置"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:93
msgid "A RAID resynchronization is in progress."
msgstr "RAID正在重新同步。"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:101
msgid "Only some of the RAID devices are unclean or contain failed disks."
msgstr "只有一些RAID设备未清理。"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:103
msgid "Manual intervention may be required."
msgstr "可能需要手动干预。"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:112
msgid "All RAID devices are in a clean state."
msgstr "所有RAID设备处于空白状态"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:120
msgid "All RAID devices are in an unclean state or contain failed disks."
msgstr "所有RAID设备处于空白状态"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:125
msgid "Current disk status:"
msgstr "当前磁盘状态:"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:126
msgid "Installed disks"
msgstr "已安装的磁盘"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:128
msgid "Used disks"
msgstr "已使用的磁盘"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:130
msgid "Free disks"
msgstr "空余的磁盘"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:139
msgid "To ensure continued redundancy, please shut down, install another drive of the same capacity and then return to this screen."
msgstr "您的系统中只安装了一块磁盘或者正在使用硬件镜像。如果您想启用软件镜像,请关机,安装第二块硬盘驱动器(容量相同),然后再回到此界面。"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:150
msgid "Your RAID devices are in an inconsistent state, and no spare drives were detected. You may need to manually remove a failed drive from your arrays using mdadm."
msgstr ""
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:161
msgid "Multiple spare drives have been detected. This utility can only add one drive at a time. Please either shut down and remove all but one of your spare drives, or configure your array manually."
msgstr ""
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:170
msgid "There is an unused disk drive in your system. Do you want to add it to the existing RAID array(s)?"
msgstr "您的系统中有一块未使用的磁盘驱动器。是否将它添加到已有RAID阵列中去"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:172
msgid "WARNING: ALL DATA ON THE NEW DISK WILL BE DESTROYED!"
msgstr "警告:此硬盘上的所有数据都将被清除!"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:185
msgid "The command failed:"
msgstr "命令执行失败:"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:195
msgid "Couldn't open"
msgstr "无法打开"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:212
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:225
msgid "Couldn't call"
msgstr "无法调用"
#: root/sbin/e-smith/console-menu-items/manageRAID.pl:267
msgid "Couldn't read"
msgstr "无法读取"
#: root/sbin/e-smith/console-menu-items/reboot.pl:11
msgid "Reboot, reconfigure or shut down this server"
msgstr "重启、重新配置或者关机"
#: root/sbin/e-smith/console-menu-items/reboot.pl:36
#: root/sbin/e-smith/console-menu-items/reboot.pl:62
msgid "Reboot"
msgstr "重启"
#: root/sbin/e-smith/console-menu-items/reboot.pl:36
msgid "Reboot this server"
msgstr "重启服务器"
#: root/sbin/e-smith/console-menu-items/reboot.pl:37
#: root/sbin/e-smith/console-menu-items/reboot.pl:67
msgid "Reconfigure"
msgstr "重新配置"
#: root/sbin/e-smith/console-menu-items/reboot.pl:37
msgid "Reconfigure this server"
msgstr "重新配置服务器"
#: root/sbin/e-smith/console-menu-items/reboot.pl:38
#: root/sbin/e-smith/console-menu-items/reboot.pl:57
msgid "Shutdown"
msgstr "关机"
#: root/sbin/e-smith/console-menu-items/reboot.pl:38
msgid "Shutdown this server"
msgstr "关闭服务器"
#: root/sbin/e-smith/console-menu-items/reboot.pl:43
msgid "Reboot, reconfigure or shutdown this server"
msgstr "重启、重新配置或者关闭服务器"
#: root/sbin/e-smith/console-menu-items/reboot.pl:45
msgid "Please select whether you wish to reboot, reconfigure or shutdown. The process will start as soon as you make your selection."
msgstr "请选择您是要重启、重新配置还是关机,当您选择之后会马上执行。"
#: root/sbin/e-smith/console-menu-items/reboot.pl:47
msgid "If you have an older computer without power management, the shutdown process will perform a clean halt of all system services, but will not actually power off your computer. In this case, wait for the power down message and then shut off the power manually."
msgstr "如果您的旧电脑没有电源管理,那么关机会挂起所有的系统服务,但不会自动关闭电源。在这种情况下,请等待系统关闭,然后手动关闭电源。"
#: root/sbin/e-smith/console-menu-items/reboot.pl:49
msgid "If you have changed your mind and do not want to reboot or shutdown, use the Tab key to select Cancel, then press Enter."
msgstr "如果您改变主意不想重启或关机使用Tab键来选择取消然后按Enter键。"
#: root/sbin/e-smith/console-menu-items/reboot.pl:51
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:207
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:231
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:244
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:216
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:269
msgid "Cancel"
msgstr "取消"
#: root/sbin/e-smith/console-menu-items/reboot.pl:52
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:232
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:270
msgid "OK"
msgstr "OK"
#: root/sbin/e-smith/console-menu-items/serverManager.pl:11
#: root/sbin/e-smith/console-menu-items/serverManager.pl:37
msgid "Access server manager"
msgstr "访问server manager"
#: root/sbin/e-smith/console-menu-items/serverManager.pl:39
msgid "This option will start a text-mode browser to access the server manager from this console. Normally you would access the server manager from a web browser at the following url:"
msgstr "此选项将开启一个文本浏览器由控制台去访问server manager。一般情况下您可以通过以下地址使用网络浏览器来访问server manager。"
#: root/sbin/e-smith/console-menu-items/serverManager.pl:43
msgid "You should only proceed if you are comfortable using a text-mode browser. Note that you will be prompted for the administrator password in order to access the server manager."
msgstr "如果您习惯用文本浏览器请执行即可。注意系统会要求您输入管理员密码来访问server manager。"
#: root/sbin/e-smith/console-menu-items/serverManager.pl:45
msgid "NOTE: The 'q' key is used to quit from the text-mode browser."
msgstr "注意q键通常用来退出文本浏览器。"
#: root/sbin/e-smith/console-menu-items/serverManager.pl:47
msgid "Do you wish to proceed?"
msgstr "是否继续?"
#: root/sbin/e-smith/console-menu-items/status.pl:11
msgid "Check status of this server"
msgstr "检查服务器状态"
#: root/sbin/e-smith/console-menu-items/status.pl:60
msgid "Status of this server as of"
msgstr "服务器状态"
#: root/sbin/e-smith/console-menu-items/status.pl:62
msgid "This server has been running for"
msgstr "服务器已运行"
#: root/sbin/e-smith/console-menu-items/status.pl:63
msgid "days"
msgstr "天"
#: root/sbin/e-smith/console-menu-items/status.pl:64
msgid "hours"
msgstr "小时"
#: root/sbin/e-smith/console-menu-items/status.pl:65
msgid "minutes"
msgstr "分钟"
#: root/sbin/e-smith/console-menu-items/support.pl:11
msgid "View support and licensing information"
msgstr "查看支持和许可信息"
#: root/sbin/e-smith/console-menu-items/support.pl:37
msgid "Support and licensing information"
msgstr "查看支持和许可信息"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:10
#: root/sbin/e-smith/console-menu-items/testInternet.pl:33
msgid "Test Internet access"
msgstr "测试因特网连接"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:35
msgid "After your Internet connection is operational and your server has been connected and configured, this test will verify that your server can communicate with the Internet."
msgstr "在因特网连接和服务器已被配置之后,此测试会检验服务器与因特网之间的通讯。"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:37
msgid "As part of this test, two pieces of information will be sent to koozali.org - the version installed on your server and a string used to differentiate your server from others using this test. This string is generated by a one-way hash function and access to the string does not provide any information about your server."
msgstr "作为此次测试的一部分有两个信息将被发送到koozali.org,一个是您安装的版本,一个是用于区分您同其他人的字符串。此字符串由一个单向散列函数产生,并不泄露服务器的任何信息。"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:39
msgid "We appreciate your assistance in sending this information so we can gain an accurate count of the installed servers."
msgstr "建议您发送此信息,以便我们能够得到一个准确的装机统计。"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:41
msgid "Do you wish to run the test?"
msgstr "是否运行测试?"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:47
msgid "Attempting to test Internet connection."
msgstr "正在测试因特网连接。"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:48
msgid "If this test takes too long, please halt it by typing Ctrl-C."
msgstr "如果测试花费太长时间请使用Ctrl-C键来终止。"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:55
msgid "Internet connection successful"
msgstr "因特网连接成功"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:57
msgid "The test was successful! Your server was able to communicate with koozali.org."
msgstr "测试成功服务器能够与koozali.org通信。"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:64
msgid "Internet connection failed"
msgstr "因特网连接失败"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:66
msgid "The test failed. Your server was unable to establish contact with koozali.org via the Internet."
msgstr "测试失败您的服务器无法通过因特网与koozali.org通信。"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:68
msgid "Please check that your server is correctly configured. A reboot may be required if certain settings are modified and the configuration process will advise you if this is required."
msgstr "请检查服务器的配置是否正确。某些配置被修改后,系统会提示您需要重启。"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:70
msgid "You might also want to check with your Internet provider to make sure that your Internet connection is working properly."
msgstr "您可能还需要联系您的ISP确认您的因特网连接工作正常。"
#: root/sbin/e-smith/console-menu-items/testInternet.pl:72
msgid "It is also possible (although unlikely) that there is a technical problem at the koozali.org site. In this case, you should proceed with your installation and run this test again later."
msgstr "这也可能虽然看起来不像是koozali.org站点有技术问题这种情况下请您继续安装稍后再运行测试。"
#: root/sbin/e-smith/console.pl:88
msgid "Server console"
msgstr "服务器控制台"
#: root/sbin/e-smith/console.pl:91
msgid "** unsaved changes **"
msgstr "** 未保存的更改 **"
#: root/sbin/e-smith/console.pl:98
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:32
msgid "Welcome to the server console!"
msgstr "欢迎使用服务器控制台!"
#: root/sbin/e-smith/console.pl:100
msgid "Use the Arrow and Tab keys to make your selection, then press Enter."
msgstr "使用方向键和Tab键来选择然后按Enter键。"
#: root/sbin/e-smith/console.pl:102
msgid "Exit"
msgstr "退出"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:86
msgid "Bad ttyname:"
msgstr "受损tty名称"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:89
msgid "Can't redirect stdin"
msgstr "无法重定向标准输入"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:90
msgid "Can't redirect stdout"
msgstr "无法重定向标准输出"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:93
msgid "Can't fork"
msgstr "无法创建子进程"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:143
msgid "Couldn't create pipe"
msgstr "无法创建管道"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:149
msgid "Couldn't fork"
msgstr "无法创建子进程"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:160
msgid "Couldn't close reading end of pipe"
msgstr "无法关闭读取管道结尾"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:168
msgid "Couldn't connect STDERR to pipe"
msgstr "无法连接管道标准错误"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:171
msgid "Couldn't close writing end of pipe"
msgstr "无法关闭写入管道结尾"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:185
msgid "Couldn't exec:"
msgstr "无法执行:"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:237
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:269
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:292
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:353
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:437
msgid "Back"
msgstr "后退"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:238
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:270
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:293
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:354
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:438
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:243
msgid "Next"
msgstr "下一步"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:264
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:201
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:210
msgid "please try again"
msgstr "请重试"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:321
msgid "Yes"
msgstr "是"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:322
msgid "No"
msgstr "否"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:462
msgid "Keep the current setting"
msgstr "保持当前设置"
#: root/usr/share/perl5/vendor_perl/esmith/console.pm:464
msgid "keep"
msgstr "保持"
#: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:29
msgid "Inconsistent system state"
msgstr "系统状态不一致"
#: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:31
msgid "********** Inconsistent system state detected ***********"
msgstr "********** 检测到有不一致的系统状态***********"
#: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:33
msgid "The restoration of a system backup was running and incomplete at the time of the last reboot. The system should not be used in this state."
msgstr "系统还原正在运行,由于上次重启后未引导完全。系统在这种状态下不可用。"
#: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:35
msgid "Consult the User Guide for further instructions."
msgstr "进一步的说明请参考用户指南"
#: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:40
msgid "System will be halted"
msgstr "系统即将关机"
#: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:42
msgid "The server will now be halted."
msgstr "系统即将关机。"
#: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:44
msgid "Consult the User Guide for recovery instructions."
msgstr "有关恢复的说明请参考用户指南。"
#: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:46
msgid "Do you wish to halt the system right now?"
msgstr "是否立即关闭系统?"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:21
msgid "Configure this server"
msgstr "配置服务器"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:99
msgid "Use"
msgstr "使用"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:114
msgid "local"
msgstr "本地"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:115
msgid "external"
msgstr "外部"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:120
msgid "Select %s network device"
msgstr "选择网卡设备%s"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:124
msgid "You now need to select the proper device for your %s network. The server can attempt to do this automatically, or you can do it manually. The network driver, MAC address and model of your network adapter are listed below.\n"
msgstr "您现在需要为网卡%s选择合适的驱动程序。服务器可以尝试自动处理或者您也可以手动指定。要么通过指定您以网卡的型号要么直接选择一个驱动。\n"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:179
msgid "No network interfaces found"
msgstr "找不到网卡"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:180
msgid "The installer can't continue because no network interfaces are installed or recognised. Please install at least one network interface."
msgstr "安装无法继续,因为没有或未能识别网卡。至少需要一块网网卡。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:194
msgid "Primary domain name"
msgstr "主域名"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:196
msgid "Please enter the primary domain name for your server."
msgstr "请为服务器输入主域名。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:198
msgid "This will be the default domain for your e-mail and web server. Virtual domains can be added later using the server manager."
msgstr "这将是邮件服务器和网页服务器的默认域名。以后通过server manager可以增加虚拟域名。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:224
msgid "Invalid domain name"
msgstr "无效的域名"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:242
msgid "Select system name"
msgstr "选择系统名称"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:244
msgid "Please enter the system name for your server."
msgstr "请为服务器输入系统名称。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:246
msgid "You should select unique system names for each server."
msgstr "请为每个服务器选择一个唯一的系统名称。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:248
msgid "The system name must start with a letter and can be composed of letters, numbers and hyphens."
msgstr "系统名称必须以字母开头,并且由字母、数字和连接符组成。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:282
msgid "Invalid system name"
msgstr "无效的系统名称"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:295
msgid "The specified driver failed to load."
msgstr "某个驱动器加载失败。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:333
msgid "Local networking parameters"
msgstr "本地网络参数"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:335
msgid "Please enter the local IP address for this server."
msgstr "请为服务器输入本地IP地址。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:337
msgid "If this server is the first machine on your network, we recommend accepting the default value unless you have a specific reason to choose something else."
msgstr "如果此服务器是网络中的第一台机器,除非您必须要指定某些参数,否则,建议您使用默认值。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:339
msgid "If your server is being installed into an existing network, you must choose an address which is not in use by any other computer on this network."
msgstr "如果您的服务器被安装在一个已有的网络中个,您必须选择一个未被使用的地址。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:361
msgid "Invalid local IP address"
msgstr "无效的本地IP地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:374
msgid "Select local subnet mask"
msgstr "选择本地子网掩码"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:376
msgid "Please enter the local subnet mask for this server."
msgstr "请为此服务器输入本地子网掩码。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:378
msgid "If this server is the first machine on your network, we recommend using the default unless you have a specific reason to choose something else."
msgstr "如果此服务器是您网络中的第一个机器,除非您必须要指定某些参数,否则建议您使用默认参数。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:380
msgid "If your server is being installed into an existing network, you must choose the same subnet mask used by other computers on this network."
msgstr "如果您的服务器被安装在一个已有的网络中个,您必须选择一个相同的子网掩码。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:403
msgid "Invalid local subnet mask"
msgstr "无效本地子网掩码"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:420
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:435
msgid "Server and gateway"
msgstr "Server and gateway"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:425
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:436
msgid "Private server and gateway"
msgstr "Private server and gateway"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:430
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:437
msgid "Server-only"
msgstr "Server-only"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:442
msgid "Select operation mode"
msgstr "选择操作模式"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:445
msgid "If you want this server to act as a gateway to the Internet, choose one of the server and gateway options. Server and gateway mode acts as a firewall and provides an external web and mail server. Private server and gateway mode also acts as a firewall but disables all incoming services."
msgstr "如果您想此服务器作为网关来使用请选择server and gateway 选项。server and gateway模式提供防火墙和一个web和e-mail服务器功能Private server and gateway 模式只提供防火墙功能,并且屏蔽所有入站服务。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:447
msgid "Server-only mode provides services to a local, protected network. If you choose this mode and Internet access is required, the network must be protected by another server configured in server and gateway mode (or another firewall)."
msgstr "Server-only模式只向本地网络和受保护网络提供服务。如果您选择此模式必须能访问因特网并且有另一台被配置为server and gateway模式的服务器或者其他的防火墙保护您的网络。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:493
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:503
msgid "Server and gateway - dedicated"
msgstr "Server and gateway - 专用"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:498
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:504
msgid "Server and gateway - dialup"
msgstr "Server and gateway - 拨号"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:509
msgid "Select external access mode"
msgstr "选择外部连接模式"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:512
msgid "The next step is to select the access mode that your server will use to connect to the Internet."
msgstr "下一步是选择您服务器连接因特网的访问模式。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:514
msgid "Choose the dedicated option if you access the Internet via a router, a cable modem or ADSL. Choose the dialup option if you use a modem or ISDN connection."
msgstr "如果您访问因特网的方式是通过一个路由器、一个cable modem或者ADSL请选择专用选项。如果您使用一个modem或者ISDN,请选择拨号模式。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:542
msgid "Only one network adapter"
msgstr "只有一个网络适配器"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:544
msgid "Your system only has a single network adapter. It cannot be used in this configuration."
msgstr "您的系统中只有一块网络适配器,在此配置中无法被使用。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:582
msgid "use DHCP (send account name as client identifier)"
msgstr "使用DHCP发送账户名称来作为客户端标识"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:583
msgid "DHCP with account name"
msgstr "带有账户名称的DHCP"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:589
msgid "use DHCP (send ethernet address as client identifier)"
msgstr "使用DHCP发送以太网地址来作为客户端标识"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:590
msgid "DHCP with ethernet address"
msgstr "带有以太网地址的DHCP"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:596
msgid "use PPP over Ethernet (PPPoE)"
msgstr "使用PPP over Ethernet(PPPoE)"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:597
msgid "PPPoE"
msgstr "PPPoE"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:603
msgid "use static IP address (do not use DHCP or PPPoE)"
msgstr "使用静态IP地址不适用DHPC或者PPPoE"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:604
msgid "static IP"
msgstr "静态IP地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:609
msgid "Use DHCP (send account name as client identifier)"
msgstr "使用DHCP发送账号名称作为客户端标示"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:610
msgid "Use DHCP (send ethernet address as client identifier)"
msgstr "使用DHCP发送以太网地址作为客户端标示"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:611
msgid "Use PPP over Ethernet (PPPoE)"
msgstr "使用PPPoE"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:612
msgid "Use static IP address"
msgstr "使用静态IP地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:617
msgid "External Interface Configuration"
msgstr "外网配置"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:620
msgid "Next, specify how to configure the external ethernet adapter."
msgstr "下一步,指定如何配置此外部以太网适配器。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:622
msgid "For cable modem connections, select DHCP. If your ISP has assigned a system name for your connection, use the account name option. Otherwise use the ethernet address option. For residential ADSL, use PPPoE. For most corporate connections, use a static IP address."
msgstr "对于cable modem连接选择DHCP。如果您的ISP已经为您分配了系统名称请使用账号名称选项。其他的就使用以太网地址选项。对于ADSL,请使用PPPoE。对于大部分企业来说会使用静态IP地址。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:675
msgid "Enter ISP assigned hostname"
msgstr "输入ISP分配的名称"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:677
msgid "You have selected DHCP (send account name). Please enter the account name assigned by your ISP. You must enter the account name exactly as specified by your ISP."
msgstr "您选择了DHCP发送账号名称作为客户端标示。请输入您ISP分配给您的账号名称。您必须完整无误地输入。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:694
msgid "Select PPPoE user account"
msgstr "选择PPPoE用户账号"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:696
msgid "Please enter the user account name for your PPPoE Internet connection. Most PPPoE service providers use an account name and e-mail domain. For example, "
msgstr "请输入PPPoE连接的用户账号。大部分PPPoE服务提供商会使用一个账号名称和e-mail域比如"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:714
msgid "Select PPPoE password"
msgstr "选择PPPoE密码"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:716
msgid "Please enter the password for your PPPoE Internet connection."
msgstr "请输入PPPoE连接的密码。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:739
msgid "Select static IP address"
msgstr "选择静态IP地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:741
msgid "You have chosen to configure your external Ethernet connection with a static IP address. Please enter the IP address which should be used for the external interface on this server."
msgstr "您选择了使用静态IP地址来配置您的外部以太网连接。请为此外部接口输入一个IP地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:743
msgid "Please note, this is not the address of your external gateway."
msgstr "请注意,这不是您外部网关的地址。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:764
msgid "Invalid external IP address"
msgstr "无效的外网IP地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:778
msgid "Select subnet mask"
msgstr "选择子网掩码"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:780
msgid "Please enter the subnet mask for your Internet connection. A typical subnet mask is 255.255.255.0."
msgstr "请为您的因特网连接输入一个子网掩码。比如255.255.255.0。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:805
msgid "Invalid address ranges"
msgstr "无效的地址范围"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:807
msgid ""
"Internal address range overlaps external address range\n"
"\n"
"Local interface: %s/%s\n"
"External interface: %s/%s\n"
"\n"
"Please review your settings."
msgstr ""
"内网地址范围与外网地址范围交叉\n"
"\n"
"内网: %s/%s\n"
"外网: %s/%s\n"
"\n"
"请检查设置."
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:833
msgid "Invalid external subnet mask"
msgstr "无效外部子网掩码"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:856
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1471
msgid "Select gateway IP address"
msgstr "选择网关IP地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:858
msgid "Please enter the gateway IP address for your Internet connection."
msgstr "请为你的因特网连接输入一个网关IP地址。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:883
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1507
msgid "Invalid"
msgstr "无效的"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:899
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:900
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:901
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:902
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:903
msgid "Set modem port to"
msgstr "设置modem端口为"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:903
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:937
msgid "ISDN"
msgstr "ISDN"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:904
msgid "internal ISDN card"
msgstr "内部ISDN卡"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:909
msgid "Select modem/ISDN port"
msgstr "选择modem/ISDN端口"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:912
msgid "Please specify which serial port your modem or ISDN terminal adapter is connected to. Select ISDN if you wish to use an internal ISDN card."
msgstr "请指定连接modem或者ISDN终端适配器的串行端口。如果您使用内部ISDN卡请选择ISDN。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1090
msgid "ISDN card detected"
msgstr "检测到ISDN卡"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1092
msgid "Do you wish to use the following ISDN card for your Internet connection?"
msgstr "您想要为您的因特网连接使用下面的ISDN卡么"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1108
msgid "ISDN driver options"
msgstr "ISDN驱动选项"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1110
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1174
msgid "You have selected an internal ISDN card."
msgstr "您选择了一快内部ISND卡。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1112
msgid "The ISDN software will need to be told what ISDN hardware you have. It may also need to be told what protocol number to use and may need to be given some additional information about your hardware such as the I/O address and interrupt settings."
msgstr "您需要告知系统ISDN硬件信息包括所用协议号其他诸如I/O地址和中断等。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1114
msgid "This information is provided via an options string. An example is"
msgstr "此信息由一个可选 字符串提供。比如"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1116
msgid "which would be used to set the"
msgstr "一般用来设置"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1118
msgid "to EURO-ISDN."
msgstr "为EURO-ISDN."
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1144
msgid "Multiple Subscriber Numbering"
msgstr "多个用户号码"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1146
msgid "Your ISDN line may have more than one number associated with it known as Multiple Subscriber Numbering (MSN). In order to receive an incoming ISDN call from an ISP or a remote site, you may need to configure your ISDN card with its MSN so that ISDN calls are routed correctly. If you do not know this number, you can leave this value blank."
msgstr "您的ISDN有多个分配号码简称MSN。为了从您的ISP或者其他站点接收一个入站ISDN呼叫您需要做好ISDN卡的多号码MSN配置以便您的ISDN呼叫路径正确。如果您不知道这个号码请留空。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1156
msgid "Invalid Multiple Subscriber Numbering (MSN)"
msgstr "无效多用户号码(MSN)"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1176
msgid "The driver for this card includes modem emulation software, and modem control commands are used by the networking software to configure and control the ISDN interface card."
msgstr "此卡的驱动包括modem模拟程序和modem控制命令通常被网络软件用来配置和控制ISDN卡。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1178
msgid "The precise behavior of your ISDN card can be modified by using a specific modem initialization string, to adjust the settings of the card, or to modify its default behavior. Most cards should work correctly with the default settings, but you may enter a modem initialization string here if required."
msgstr "要修改ISDN卡的性能可以通过指定的modem初始化字符串来实现它可以调整ISDN卡参数设置或者修改ISDN卡的默认性能值。大部分卡使用默认设置工作正常如有需要您可以输入modem初始化字符串。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1181
msgid "You have selected a modem device."
msgstr "您已经选择了一个modem设备"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1183
msgid "The precise behavior of your modem can be modified by using a specific modem initialization string, to adjust the settings of your modem, or to modify its default behavior. You may enter a modem initialization string here."
msgstr "要修改ISDN卡的性能可以通过指定的modem初始化字符串来实现它可以调整ISDN卡参数设置或者修改ISDN卡的默认性能值。您可以在此处输入modem初始化字符串。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1185
msgid "Many modems will work correctly without any special settings. If you leave this field blank, the default string of"
msgstr "不需要特别的设置大部分modem工作都很正常。如果此字段留空默认字符串"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1187
msgid "will be used. This turns the modem speaker off, so that you will not be bothered by the noises that a modem makes when it starts a connection."
msgstr "将被使用。这将关闭modem的喇叭以避免开始连接产生的噪音打扰。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1193
msgid "Modem initialization string"
msgstr "modem初始化字符串"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1226
msgid "Select access phone number"
msgstr "选择接入电话号码"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1229
msgid "Please enter the access phone number for your Internet connection. Long distance numbers can be entered. The phone number must not contain spaces, but may contain dashes for readability. Commas may be inserted where a delay is required. For example, if you need to dial 9 first, then wait, then dial a phone number, you could enter"
msgstr "请为您的因特网连接输入接入电话号码区号也要输入。接入电话号码不能包含空格但为了易读性会包含破折号。例如如果您需要先拨9然后等待接下来再拨您输入的电话号码。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1256
msgid "Invalid access phone number"
msgstr "无效接入电话号码"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1268
msgid "Please enter the user account name for your Internet connection."
msgstr "请为您的因特网连接输入账户名。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1270
msgid "Please note that account names are usually case sensitive."
msgstr "请注意账号名通常区分大小写。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1274
msgid "Select dialup user account"
msgstr "选择拨号连接用户账号"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1290
msgid "Please enter the password for your Internet connection."
msgstr "请为您的因特网连接输入密码。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1292
msgid "Please note that passwords are usually case sensitive."
msgstr "请注意密码通常区分大小写。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1296
msgid "Select dialup password"
msgstr "选择拨号密码"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1338
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1362
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1384
msgid "Select connect policy"
msgstr "选择连接策略"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1341
msgid "Select the dialup connect policy that you would like to use during office hours (8:00 AM to 6:00 PM) on weekdays."
msgstr "选择拨号连接政策在平日办公时间内上午8:00至下午6:00使用使用"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1365
msgid "Please select the dialup connect policy that you would like to use outside office hours (6:00 PM to 8:00 AM) on weekdays."
msgstr "选择拨号连接政策在平日非办公时间内下午6:00至上午8:00使用使用"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1387
msgid "Please select the dialup connect policy that you would like to use during the weekend."
msgstr "请选择周末的拨号连接策略。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1414
msgid "Enable NIC bonding"
msgstr "启用NIC绑定"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1414
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1428
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1430
msgid "enabled"
msgstr "启用"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1415
msgid "Disable NIC bonding"
msgstr "禁用NIC绑定"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1415
msgid "disabled"
msgstr "禁用"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1420
msgid "NIC Bonding"
msgstr "NIC绑定"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1423
msgid "You have more than one network adapter. Would you like to bond them together into a single interface? This can provide greater throughput and/or failure resiliency, depending on your adapters and network configuration."
msgstr "您有多快网络适配器。您是否要将它们绑定到一个单独的接口上?根据您的适配器和网络的配置,这将提供更好的吞吐量和(或)稳定性。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1441
msgid ""
"The NIC bonding driver allows various modes and performance options. Edit the option string below if the defaults are not suitable.\n"
"\n"
"Most users do not need to change this setting.\n"
msgstr ""
"NIC绑定驱动程序有多种模式和选项。如果默认设置不适合请修改下面的字符串\n"
"\n"
"大部分用户无需修改。\n"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1445
msgid "NIC Bonding Options"
msgstr "网卡绑定选项"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1473
msgid "In server-only mode, this server will use only one ethernet adapter connected to your local network. If you have a firewall and wish to use this server as your e-mail/web server, you should consult the firewall documentation for networking details."
msgstr "在server-only模式中只允许使用一个以太网适配器连接到您的本地网路。如果您有一个防火墙并且您想让此服务器作为您的mail/web服务器请仔细查阅防火墙文档的网络部分。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1475
msgid "Please specify the gateway IP address that this server should use to access the Internet. Leave blank if you have no Internet access."
msgstr "请指定此服务器的网关IP地址。如果没有因特网接入请留空。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1550
msgid "Can't open output file"
msgstr "无法打开输出文件"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1571
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1576
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1597
msgid "Off"
msgstr "Off"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1571
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1575
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1592
msgid "On"
msgstr "On"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1575
msgid "Provide DHCP service to local network"
msgstr "向本地网络提供DHCP服务"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1576
msgid "Do not provide DHCP service to local network"
msgstr "不向本地网络提供DHCP服务"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1581
msgid "Select DHCP server configuration"
msgstr "选择DHCP服务器配置"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1584
msgid "Please specify whether you would like this server to provide DHCP service to your local network. This will let you assign IP addresses to your other network computers automatically by configuring them to obtain their IP information using DHCP."
msgstr "请指定此服务器是否向本地网络提供DHCP服务。通过DHCP的配置可以自动为您本地网络中的计算机指派IP地址。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1586
msgid "We strongly advise that all clients are configured using DHCP."
msgstr "我们强烈加你所有的客户端配置使用为DHCP即自动获取IP地址。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1620
msgid "Select beginning of DHCP host number range"
msgstr "选择DHCP的起始地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1622
msgid "You must reserve a range of host numbers for the DHCP server to use."
msgstr "您必须保留一些地址以备用。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1624
msgid "Please enter the first host number in this range. If you are using the standard server defaults and have no particular preference, you should keep the default values."
msgstr "请输入分配的第一主机号。如果您正在使用默认的标准服务器,且没有特殊要求,请保持默认值。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1646
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1742
msgid "That address is not on the local network."
msgstr "此IP地址不在本地网络范围内。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1651
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1747
msgid "Invalid IP address for DHCP start"
msgstr "无效的DHCP起始IP地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1657
msgid "You must provide an IP address for the start of the DHCP range."
msgstr "必须为DHCP提供起始IP地址。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1683
msgid "Select end of DHCP host number range"
msgstr "选择DHCP的结尾地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1685
msgid "Please enter the last host address in this range. If you are using the standard server defaults and have no particular preference, you should keep the default value. Think to add enough ip for vpn sessions."
msgstr "请输入要分配的最后一个地址。如果您正在使用默认的标准服务器且没有特殊要求请保持默认值。保证有足够的ip维持VPN会话。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1725
msgid "There is not enough IP in the range to include all your vpn sessions"
msgstr "没有足够的IP维持VPN会话"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1730
msgid "The IP range cannot include our private network address."
msgstr "IP分配范围不能包括私有网络地址。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1736
msgid "The end of the range must be larger than the start."
msgstr "分配的结尾值必须大于起始值。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1753
msgid "You must provide an IP address for the end of the DHCP range."
msgstr "您必须为DHCP的结尾提供一个IP地址。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1773
msgid "Corporate DNS server address"
msgstr "公共DNS服务器地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1775
msgid "If this server does not have access to the Internet, or you have special requirements for DNS resolution, enter the DNS server IP address here."
msgstr "如果服务器没有联网或者您对于DNS解析有特殊要求请在这里输入DNS服务器IP地址。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1777
msgid "This field should be left blank unless you have a specific reason to configure another DNS server."
msgstr "这里应该留空除非您有特殊的原因要设置另一台DNS服务器。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1779
msgid "You should not enter the address of your ISP's DNS servers here, as the server is capable of resolving all Internet DNS names without this additional configuration."
msgstr "您不需在这里输入ISP的DNS服务器因为这台服务器本身不需要额外配置就能够解析所有互联网的域名请求。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1809
msgid "Invalid IP address for DNS forwarder"
msgstr "无效的DNS转发IP地址"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1825
msgid "No unsaved changes"
msgstr "没有未保存的更改"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1827
msgid "No changes were made during the configuration process"
msgstr "配置过程没有作任何更改"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1829
msgid "Press ENTER to proceed."
msgstr "按enter键继续。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1830
msgid "Finish"
msgstr "完成"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1843
msgid "Changes will take effect after reboot"
msgstr "更改在重启后生效"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1845
msgid "The new configuration will take effect when you reboot the server."
msgstr "新的配置将在服务器重启后生效。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1847
msgid "Do you wish to reboot right now?"
msgstr "是否立即重启?"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1865
msgid "Activate configuration changes"
msgstr "激活配置更改"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1867
msgid "Your configuration changes will now be activated. The configuration files on this server will be changed to reflect your new settings. This may take a few minutes."
msgstr "您的配置更改将被激活,服务器的配置文件将被修改,这可能会花费几分钟。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1869
msgid "Do you wish to activate your changes?"
msgstr "是否激活变更?"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1884
#: root/usr/share/perl5/vendor_perl/esmith/console/save_config.pm:27
msgid "Activating configuration settings"
msgstr "正在激活配置设置"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1885
#: root/usr/share/perl5/vendor_perl/esmith/console/save_config.pm:28
msgid "Please stand by while your configuration settings are activated ..."
msgstr "配置设置正在激活,请稍后..."
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1916
#: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:34
msgid "*** THERE ARE UNACTIVATED CHANGES - QUIT ANYWAY? ***"
msgstr "*** 还有未被激活的变更,无论如何都退出?***"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1919
#: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:37
msgid "Your configuration changes have been saved but have not yet been activated. This may result in unpredictable system behavior. We recommend that you complete the configuration process and activate the changes before exiting the console."
msgstr "您的配置更改已被保存但没有被激活。这可能是系统意外。建议您完成配置,激活变更之后再退出。"
#: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1921
#: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:39
msgid "Are you sure you want to quit with unactivated changes?"
msgstr "是否不激活变更就退出?"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:25
msgid "Perform backup to removable media"
msgstr "备份到可移动介质"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:85
msgid "Could not create backup file on device"
msgstr "在磁盘上不能创建备份文件"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:150
msgid "Backup failed. Look at the log files for more details."
msgstr "备份失败。详情请查看日志。"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:150
msgid "Backup successfully created."
msgstr "备份创建成功。"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:171
msgid "Create Backup to removable media"
msgstr "备份到可移动介质"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:173
msgid "Do you wish to create a backup on removable media?"
msgstr "是否在可移动介质上创建备份?"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:174
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:173
msgid "Insert removable media before proceeding."
msgstr "请插入可移动介质然后按enter键。"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:175
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:174
msgid "It may take many seconds to scan for media."
msgstr ""
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:191
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:202
msgid "These filesystems are not valid:"
msgstr ""
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:194
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:205
msgid "Reason"
msgstr ""
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:200
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:209
msgid "No valid backup device found"
msgstr "没有发现备份文件"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:200
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:220
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:228
msgid "size"
msgstr "大小"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:206
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:215
msgid "Try again"
msgstr "请重试"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:219
msgid "The following are valid for backup"
msgstr "以下文件被识别为备份文件:"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:228
msgid "Choose device to use for backup"
msgstr "请选择用于备份的设备"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:242
msgid "Some parts are excluded of your backup"
msgstr ""
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:251
msgid "Preparing for backup"
msgstr "正在准备备份"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:252
msgid "Please stand by while the system is prepared for backup..."
msgstr "系统正在准备备份,请稍后..."
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:257
msgid "Creating backup file"
msgstr "正在创建备份文件"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:265
msgid "Backup complete"
msgstr "备份完毕"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:266
msgid "Remove backup media."
msgstr "移除备份任务"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:21
msgid "Restore from removable media"
msgstr "从可移动介质中还原"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:137
msgid "Restore failed. Your system is likely in an inconsistent state - look at the log files for more details."
msgstr ""
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:140
msgid "Restore successful."
msgstr "因特网连接成功"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:170
msgid "Restore From Backup"
msgstr "从备份中还原"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:172
msgid "Do you wish to restore from backup?"
msgstr "是否从备份中还原?"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:189
msgid "These filesystems could hold backups"
msgstr ""
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:234
msgid "Date"
msgstr "日期"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:235
msgid "Size"
msgstr "大小"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:239
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:264
msgid "Start restore from backup"
msgstr "开始从备份中还原"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:241
msgid "Backup found on device"
msgstr "备份返回值非零"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:243
msgid "Backup details"
msgstr "备份为"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:245
msgid "Do you wish to restore from this file?"
msgstr "是否从这个文件还原?"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:252
msgid "Backups found on these devices"
msgstr "备份返回值非零"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:267
msgid "Please select the backup that you wish to restore from."
msgstr "请选择包含您想要还原的备份文件的设备"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:283
msgid "Preparing for restore"
msgstr "正在准备备份"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:284
msgid "Please stand by while the system is prepared for restore..."
msgstr "系统正在准备备份,请稍后..."
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:293
msgid "Restoring from backup"
msgstr "从备份中还原"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:309
msgid "Restore Complete"
msgstr "系统还原完成"
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:310
msgid "You must restart your system to finish the restore."
msgstr ""
#: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:311
msgid "Do you want to restart now?"
msgstr "是否立即重启?"
#: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:10
msgid "Exit from the server console"
msgstr "退出终端"
#: root/usr/share/perl5/vendor_perl/esmith/console/startup.pm:112
msgid "Starting system services"
msgstr ""
#: root/usr/share/perl5/vendor_perl/esmith/console/startup.pm:114
msgid "Please standby while system services are started ..."
msgstr "系统正在准备备份,请稍后..."
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:30
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:109
msgid "Choose administrator password"
msgstr "选择管理员密码"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:34
msgid "You will now be taken through a sequence of screens to perform basic networking configuration on this server."
msgstr "您将通过一系列界面执行服务器的基本网络配置。"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:36
msgid "You can make your selections in each screen using the Arrow and Tab keys. At any point, if you select Back you will be returned to the previous screen."
msgstr "在界面使用方向键和tab键进行选择。在任何时候您都可以选择后退回到上一个界面。"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:38
msgid "Before you start, you must first choose the administrator password for your system and enter it below. You will not see the password as you enter it."
msgstr "在开始之前,您必须在下面设置系统管理员密码。密码不会以明文显示。"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:45
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:117
msgid "Administrator password not set"
msgstr "没有设置管理员密码"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:46
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:118
msgid "Sorry, you must set the administrator password now."
msgstr "对不起,您必须立即设置管理员密码。"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:56
msgid "Unprintable characters in password"
msgstr "在密码中有不可打印的字符。"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:57
msgid "The password must contain only printable characters."
msgstr "密码只能包含可打印的字符。"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:70
msgid "it is based on your username"
msgstr "它是基于您的用户名"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:71
msgid "it is based upon your password entry"
msgstr "它是基于您的密码输入"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:72
msgid "it is derived from your password entry"
msgstr "这是来自你的密码输入"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:73
msgid "it is derivable from your password entry"
msgstr "密码基于您的输入"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:74
msgid "it is too short"
msgstr "密码太短"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:75
msgid "it is all whitespace"
msgstr "全是空白"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:76
msgid "it is too simplistic/systematic"
msgstr "太过简单"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:77
msgid "it is based on a dictionary word"
msgstr "密码基于字典"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:78
msgid "it is based on a (reversed) dictionary word"
msgstr "密码基于字典单词"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:79
msgid "it does not contain numbers"
msgstr "密码没有包含数字"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:80
msgid "it does not contain uppercase characters"
msgstr "不包含大写字母"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:81
msgid "it does not contain lowercase characters"
msgstr "不包含小写字母"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:82
msgid "it does not contain special characters"
msgstr "不包含特殊字符"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:91
msgid "Software error: password check failed"
msgstr "软件错误:密码检查失败"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:96
msgid "Bad Password Choice"
msgstr "糟糕的密码"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:98
msgid "The password you have chosen is not a good choice, because "
msgstr "您输入的密码不够强健,因为"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:101
msgid "Do you wish to choose a better one?"
msgstr "是否选择一个更好的密码?"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:110
msgid "Please type your administrator password again to verify."
msgstr "请重新输入管理员密码"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:128
msgid "Passwords do not match"
msgstr "密码不匹配。"
#: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:129
msgid "The two passwords did not match"
msgstr "两次密码不匹配。"
#~ msgid "for chipset"
#~ msgstr "芯片组"
#~ msgid "Success"
#~ msgstr "成功"
#~ msgid "You can scroll through this document using the up and down arrow keys or the Page Up and Page Down keys."
#~ msgstr "您可以通过使用上下键或者Page Up和Page Down键来浏览此文档。"
#~ msgid "Mitel Networks Corporation support and licensing information"
#~ msgstr "Mitel Network支持和许可信息"
#~ msgid "bytes"
#~ msgstr "字节"
#~ msgid "Backup file found:"
#~ msgstr "发现备份文件:"
#~ msgid "Backup file not found"
#~ msgstr "备份文件没有找到"
#~ msgid "Choose device to restore from"
#~ msgstr "从哪个设备还原"
#~ msgid "No removable media or device found"
#~ msgstr "没有发现可移动介质或设备"
#~ msgid "Backup medium not found"
#~ msgstr "备份媒介没找到"
#~ msgid "Insert removable media containing your backup file, then hit the enter key."
#~ msgstr "请插入包含备份文件的可移动介质然后按enter键。"
#~ msgid "Insert media containing backup"
#~ msgstr "请插入包含备份的介质"
#~ msgid "Remove removable media, then hit the enter key."
#~ msgstr "请移除可移动介质然后按enter键。"
#~ msgid "No mountable backup medium"
#~ msgstr "没有找到可读的备份介质"
#~ msgid "No removable and/or writable media or device found"
#~ msgstr "没有发现可移动的/可读的介质或设备"
#~ msgid "Writable backup medium not found"
#~ msgstr "没有找到可读的备份介质"
#~ msgid "Insert media to use for backup"
#~ msgstr "请插入用于备份的媒介"
#~ msgid "This configuration is not yet fully supported in these screens."
#~ msgstr "此配置在这些屏幕上不完全被支持。"
#~ msgid "The free and used disk count must equal one."
#~ msgstr "空余磁盘和已用磁盘数必须等于1."
#~ msgid "Please enter the password for your dynamic DNS service"
#~ msgstr "请输入您动态DNS服务的密码"
#~ msgid "Select dynamic DNS password"
#~ msgstr "选择动态DSN密码"
#~ msgid "Please enter the account name for your dynamic DNS service"
#~ msgstr "请输入您动态DNS服务的账号名称"
#~ msgid "Select dynamic DNS account"
#~ msgstr "选择动态DNS账号"
#~ msgid "Choose which dynamic DNS service you would like to use."
#~ msgstr "选择您想使用的动态DNS服务"
#~ msgid "Please specify whether you wish to subscribe to a dynamic DNS service. Such services allow you to have a domain name without a static IP address, and are available from various organizations for free or for a reasonable charge. A notification must be sent to the dynamic DNS service whenever your IP address changes. Your server can automatically do this for some dynamic DNS services."
#~ msgstr "请指定您是否要使用动态DNS服务。此服务可让您不需要静态IP地址同样可以拥有一个域名有很多组织免费提供此类服务。当您的IP地址变更后必须通告动态DNS服务放心您的服务器会自动处理。"
#~ msgid "Select dynamic DNS service"
#~ msgstr "选择动态DNS服务"
#~ msgid "custom DynDNS service"
#~ msgstr "自定义动态DNS服务"
#~ msgid "commercial service"
#~ msgstr "商业服务"
#~ msgid "free service"
#~ msgstr "免费服务"
#~ msgid "Do not use a dynamic DNS service"
#~ msgstr "未使用动态DNS服务"
#~ msgid "Cannot read directory"
#~ msgstr "无法读取目录"