msgid "" msgstr "" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: da\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:16 msgid "Manage disk redundancy" msgstr "Administrer disk redundans" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:42 msgid "Disk redundancy status as of" msgstr "Disk-redundans-status" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:43 msgid "Current RAID status:" msgstr "Aktuel RAID-status:" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:52 msgid "There are no RAID devices configured" msgstr "Der er ikke konfigureret nogen RAID-enheder" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:93 msgid "A RAID resynchronization is in progress." msgstr "RAID synkronisering er i gang." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:101 msgid "Only some of the RAID devices are unclean or contain failed disks." msgstr "Nogle af RAID-enhederne er ikke ok." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:103 msgid "Manual intervention may be required." msgstr "Det kan være nødvendigt med manuel indstilling." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:112 msgid "All RAID devices are in a clean state." msgstr "Alle RAID-enheder er i ok tilstand" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:120 msgid "All RAID devices are in an unclean state or contain failed disks." msgstr "Alle RAID enheder er ikke synkroniseret eller indeholder fejlbehæftede disk(e)." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:125 msgid "Current disk status:" msgstr "Aktuel diskstatus:" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:126 msgid "Installed disks" msgstr "Installerede diske" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:128 msgid "Used disks" msgstr "Anvendte diske" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:130 msgid "Free disks" msgstr "Ledige diske" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:139 msgid "To ensure continued redundancy, please shut down, install another drive of the same capacity and then return to this screen." msgstr "Der er kun installeret en enkelt disk på dit system eller du bruger hardwarespejling. Ønsker du at anvende softwarespejling, luk serveren ned, installer en ekstra disk (med samme kapacitet) og vend så tilbage til denne skærm." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:150 msgid "Your RAID devices are in an inconsistent state, and no spare drives were detected. You may need to manually remove a failed drive from your arrays using mdadm." msgstr "Dine RAID enheder er i ikke synkroniseret, og der er ikke dedekteret et reserve drev. Du må eventuelt manuelt fjerne en fejlbehæftet disk ved hjælp af mdadm" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:161 msgid "Multiple spare drives have been detected. This utility can only add one drive at a time. Please either shut down and remove all but one of your spare drives, or configure your array manually." msgstr "Der er fundet flere ekstra drev. Denne funktion kan kun tilføje ét drev ad gangen. Luk enten ned og fjern alle reserve drev undtagen ét, eller konfigurer dit array manuelt." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:170 msgid "There is an unused disk drive in your system. Do you want to add it to the existing RAID array(s)?" msgstr "Der er en ubrugt disk i systemet. Ønsker du at føje den til de(t) eksisterende RAID-sæt?" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:172 msgid "WARNING: ALL DATA ON THE NEW DISK WILL BE DESTROYED!" msgstr "ADVARSEL: ALLE DATA PÅ DEN NYE DISK VIL BLIVE SLETTET!" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:185 msgid "The command failed:" msgstr "Kommandoen fejlede:" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:195 msgid "Couldn't open" msgstr "Kunne ikke åbne" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:212 #: root/sbin/e-smith/console-menu-items/manageRAID.pl:225 msgid "Couldn't call" msgstr "Kunne ikke kalde" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:267 msgid "Couldn't read" msgstr "Kunne ikke læse" #: root/sbin/e-smith/console-menu-items/reboot.pl:11 msgid "Reboot, reconfigure or shut down this server" msgstr "Genstart, genopsæt eller luk denne server" #: root/sbin/e-smith/console-menu-items/reboot.pl:36 #: root/sbin/e-smith/console-menu-items/reboot.pl:62 msgid "Reboot" msgstr "Genstart" #: root/sbin/e-smith/console-menu-items/reboot.pl:36 msgid "Reboot this server" msgstr "Genstart denne server" #: root/sbin/e-smith/console-menu-items/reboot.pl:37 #: root/sbin/e-smith/console-menu-items/reboot.pl:67 msgid "Reconfigure" msgstr "Omkonfigurer" #: root/sbin/e-smith/console-menu-items/reboot.pl:37 msgid "Reconfigure this server" msgstr "Omkonfigurer denne server" #: root/sbin/e-smith/console-menu-items/reboot.pl:38 #: root/sbin/e-smith/console-menu-items/reboot.pl:57 msgid "Shutdown" msgstr "Luk ned" #: root/sbin/e-smith/console-menu-items/reboot.pl:38 msgid "Shutdown this server" msgstr "Luk denne server ned" #: root/sbin/e-smith/console-menu-items/reboot.pl:43 msgid "Reboot, reconfigure or shutdown this server" msgstr "Genstart, omkonfigurer eller luk denne server" #: root/sbin/e-smith/console-menu-items/reboot.pl:45 msgid "Please select whether you wish to reboot, reconfigure or shutdown. The process will start as soon as you make your selection." msgstr "Vælg venligst om du ønsker at genstarte, omkonfigurere eller lukke serveren. Processen vil starte så snart du har angivet dit valg." #: root/sbin/e-smith/console-menu-items/reboot.pl:47 msgid "If you have an older computer without power management, the shutdown process will perform a clean halt of all system services, but will not actually power off your computer. In this case, wait for the power down message and then shut off the power manually." msgstr "Har du en ældre computer uden strømstyring vil nedlukningen medføre at alle systemprocesser standser, men strømmen vil ikke blive taget fra. I så tilfælde, vent på 'power down' beskeden og sluk så computeren manuelt." #: root/sbin/e-smith/console-menu-items/reboot.pl:49 msgid "If you have changed your mind and do not want to reboot or shutdown, use the Tab key to select Cancel, then press Enter." msgstr "Har du skiftet mening og alligevel ikke ønsker at genstarte eller lukke ned, så brug tabulatortasten for at vælge Fortryd og tast Enter." #: root/sbin/e-smith/console-menu-items/reboot.pl:51 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:207 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:231 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:244 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:216 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:269 msgid "Cancel" msgstr "Fortryd" #: root/sbin/e-smith/console-menu-items/reboot.pl:52 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:232 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:270 msgid "OK" msgstr "OK" #: root/sbin/e-smith/console-menu-items/serverManager.pl:11 #: root/sbin/e-smith/console-menu-items/serverManager.pl:37 msgid "Access server manager" msgstr "Gå til serverstyringen" #: root/sbin/e-smith/console-menu-items/serverManager.pl:39 msgid "This option will start a text-mode browser to access the server manager from this console. Normally you would access the server manager from a web browser at the following url:" msgstr "Denne mulighed vil starte en tekstbrowser og tilgå Serverstyring fra denne konsol. Normalt vil man tilgå Serverstyringen fra en webbrowser med følgende adresse:" #: root/sbin/e-smith/console-menu-items/serverManager.pl:43 msgid "You should only proceed if you are comfortable using a text-mode browser. Note that you will be prompted for the administrator password in order to access the server manager." msgstr "Du bør kun fortsætte hvis du er fortrolig med anvendelsen af en tekstbrowser. Bemærk at du vil blive afkrævet administratoradgangskoden for at få adgang til Serverstyringen." #: root/sbin/e-smith/console-menu-items/serverManager.pl:45 msgid "NOTE: The 'q' key is used to quit from the text-mode browser." msgstr "BEMÆRK: 'q'-tasten bruges til at forlade den tekstbaserede browser." #: root/sbin/e-smith/console-menu-items/serverManager.pl:47 msgid "Do you wish to proceed?" msgstr "Ønsker du at fortsætte?" #: root/sbin/e-smith/console-menu-items/status.pl:11 msgid "Check status of this server" msgstr "Check status for denne server" #: root/sbin/e-smith/console-menu-items/status.pl:60 msgid "Status of this server as of" msgstr "Status for denne server pr" #: root/sbin/e-smith/console-menu-items/status.pl:62 msgid "This server has been running for" msgstr "Serveren har været oppe i" #: root/sbin/e-smith/console-menu-items/status.pl:63 msgid "days" msgstr "dage" #: root/sbin/e-smith/console-menu-items/status.pl:64 msgid "hours" msgstr "timer" #: root/sbin/e-smith/console-menu-items/status.pl:65 msgid "minutes" msgstr "minutter" #: root/sbin/e-smith/console-menu-items/support.pl:11 msgid "View support and licensing information" msgstr "Læs support- og licensinformation" #: root/sbin/e-smith/console-menu-items/support.pl:37 msgid "Support and licensing information" msgstr "Support- og licensinformation" #: root/sbin/e-smith/console-menu-items/testInternet.pl:10 #: root/sbin/e-smith/console-menu-items/testInternet.pl:33 msgid "Test Internet access" msgstr "Test Internet-adgang" #: root/sbin/e-smith/console-menu-items/testInternet.pl:35 msgid "After your Internet connection is operational and your server has been connected and configured, this test will verify that your server can communicate with the Internet." msgstr "Når din Internetforbindelse er anvendelig, din server er opsat og tilsluttet, vil denne test bekræfte at serveren kan kommunikere via Internettet." #: root/sbin/e-smith/console-menu-items/testInternet.pl:37 msgid "As part of this test, two pieces of information will be sent to koozali.org - the version installed on your server and a string used to differentiate your server from others using this test. This string is generated by a one-way hash function and access to the string does not provide any information about your server." msgstr "Som en del af denne test vil to sæt informationer blive sendt til contribs.org - den version, der er installeret på din server og en streng, der anvendes til at adskille din server fra andre under testen. Denne stren er en hash-værdi og adgang til den oplyser intet om din server." #: root/sbin/e-smith/console-menu-items/testInternet.pl:39 msgid "We appreciate your assistance in sending this information so we can gain an accurate count of the installed servers." msgstr "Vi værdsætter din hjælp ved at sende denne streng, så vi kan få en præcis optælling af installerede servere." #: root/sbin/e-smith/console-menu-items/testInternet.pl:41 msgid "Do you wish to run the test?" msgstr "Ønsker du at udføre denne test?" #: root/sbin/e-smith/console-menu-items/testInternet.pl:47 msgid "Attempting to test Internet connection." msgstr "Forsøger at teste Internet-forbindelsen." #: root/sbin/e-smith/console-menu-items/testInternet.pl:48 msgid "If this test takes too long, please halt it by typing Ctrl-C." msgstr "Tager denne test for lang tid kan den standses med Ctrl-C." #: root/sbin/e-smith/console-menu-items/testInternet.pl:55 msgid "Internet connection successful" msgstr "Internetforbindelse ok" #: root/sbin/e-smith/console-menu-items/testInternet.pl:57 msgid "The test was successful! Your server was able to communicate with koozali.org." msgstr "Testen forløb med succes! Din server kunne kommunikere med koozali.org." #: root/sbin/e-smith/console-menu-items/testInternet.pl:64 msgid "Internet connection failed" msgstr "Internet-forbindelsen fejlede" #: root/sbin/e-smith/console-menu-items/testInternet.pl:66 msgid "The test failed. Your server was unable to establish contact with koozali.org via the Internet." msgstr "Testen fejlede. Serveren kunne ikke kommunikere med koozali.org via Internet." #: root/sbin/e-smith/console-menu-items/testInternet.pl:68 msgid "Please check that your server is correctly configured. A reboot may be required if certain settings are modified and the configuration process will advise you if this is required." msgstr "Kontrollér om din server er opsat korrekt. Det kan være nødvendigt at genstarte serveren hvis der er ændret på nogle indstillinger, men det vil du få besked om." #: root/sbin/e-smith/console-menu-items/testInternet.pl:70 msgid "You might also want to check with your Internet provider to make sure that your Internet connection is working properly." msgstr "Det kan være du skal konferere med din Internetudbyder for at sikre at din forbindelse virker efter hensigten." #: root/sbin/e-smith/console-menu-items/testInternet.pl:72 msgid "It is also possible (although unlikely) that there is a technical problem at the koozali.org site. In this case, you should proceed with your installation and run this test again later." msgstr "Det er også muligt (men usandsynligt) at der er tekniske problemer hos koozali.org. I så tilfælde, fortsæt din installation og test igen senere." #: root/sbin/e-smith/console.pl:88 msgid "Server console" msgstr "Serverkonsollen" #: root/sbin/e-smith/console.pl:91 msgid "** unsaved changes **" msgstr "** ændringer er ikke gemt **" #: root/sbin/e-smith/console.pl:98 #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:32 msgid "Welcome to the server console!" msgstr "Velkommen til server konsollen!" #: root/sbin/e-smith/console.pl:100 msgid "Use the Arrow and Tab keys to make your selection, then press Enter." msgstr "Brug piletaster og tabulator for at vælge og tast så Enter." #: root/sbin/e-smith/console.pl:102 msgid "Exit" msgstr "Afslut" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:86 msgid "Bad ttyname:" msgstr "Dårligt tty-navn:" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:89 msgid "Can't redirect stdin" msgstr "Kan ikke omstille 'stdin'" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:90 msgid "Can't redirect stdout" msgstr "Kan ikke omstille 'stdout'" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:93 msgid "Can't fork" msgstr "Kan ikke 'fork'" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:143 msgid "Couldn't create pipe" msgstr "Kunne ikke oprette 'pipe'" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:149 msgid "Couldn't fork" msgstr "Kunne ikke 'fork'" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:160 msgid "Couldn't close reading end of pipe" msgstr "Kunne ikke nærlæse slutning på 'pipe'" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:168 msgid "Couldn't connect STDERR to pipe" msgstr "Kunne ikke forbinde 'STDERR' til 'pipe'" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:171 msgid "Couldn't close writing end of pipe" msgstr "Kunne ikke lukke skrivning slut på 'pipe'" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:185 msgid "Couldn't exec:" msgstr "Kunne ikke udføre:" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:237 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:269 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:292 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:353 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:437 msgid "Back" msgstr "Tilbage" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:238 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:270 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:293 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:354 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:438 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:243 msgid "Next" msgstr "Næste" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:264 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:201 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:210 msgid "please try again" msgstr "venligst prøv igen" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:321 msgid "Yes" msgstr "Ja" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:322 msgid "No" msgstr "Nej" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:462 msgid "Keep the current setting" msgstr "Bevar aktuelle indstillinger" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:464 msgid "keep" msgstr "bevar" #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:29 msgid "Inconsistent system state" msgstr "Inkonsistent systemstatus" #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:31 msgid "********** Inconsistent system state detected ***********" msgstr "********** Inkonsistent systemstatus er opdaget **********" #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:33 msgid "The restoration of a system backup was running and incomplete at the time of the last reboot. The system should not be used in this state." msgstr "Gendannelse af serveren ud fra en sikkerhedskopi blev afbrudt af serverens genstart. Systemet bør ikke bruges i denne tilstand." #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:35 msgid "Consult the User Guide for further instructions." msgstr "Konsultér brugermanualen for yderligere instrukser." #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:40 msgid "System will be halted" msgstr "Systemet vil blive standset" #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:42 msgid "The server will now be halted." msgstr "Serveren vil blive standset nu." #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:44 msgid "Consult the User Guide for recovery instructions." msgstr "Konsulter brugermanualen for gendannelsesinstruktioner." #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:46 msgid "Do you wish to halt the system right now?" msgstr "Ønsker du at standse systemet lige nu?" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:21 msgid "Configure this server" msgstr "Konfigurer denne server" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:99 msgid "Use" msgstr "Brug" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:114 msgid "local" msgstr "Lokal" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:115 msgid "external" msgstr "ekstern" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:120 msgid "Select %s network device" msgstr "Vælg %s netkort driver" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:124 msgid "You now need to select the proper device for your %s network. The server can attempt to do this automatically, or you can do it manually. The network driver, MAC address and model of your network adapter are listed below.\n" msgstr "Du er nødt til at vælge den rette driver til dit %s netkort. Serveren kan forsøge at gøre dette automatisk eller du kan gøre det manuelt. Netkortets driver, MACD adresse og model på dit netværkskort er angivet nedenfor.\n" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:179 msgid "No network interfaces found" msgstr "Der er ikke fundet netværkskort" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:180 msgid "The installer can't continue because no network interfaces are installed or recognised. Please install at least one network interface." msgstr "Installationen kan ikke fortsætte, fordi der ikke er installeret netværkskort, eller fordi netværkkort ikke er identificeret. Installer mindst et netværkskort." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:194 msgid "Primary domain name" msgstr "Primært domænenavn" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:196 msgid "Please enter the primary domain name for your server." msgstr "Venligst indtast det primære domænenavn for din server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:198 msgid "This will be the default domain for your e-mail and web server. Virtual domains can be added later using the server manager." msgstr "Dette vil være standard domænenavn for din post- og webserver. Virtuelle domæner kan tilføjes senere i Serverstyringen." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:224 msgid "Invalid domain name" msgstr "Ugyldigt domænenavn" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:242 msgid "Select system name" msgstr "Vælg et servernavn" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:244 msgid "Please enter the system name for your server." msgstr "Venligst indtast et navn for din server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:246 msgid "You should select unique system names for each server." msgstr "Du bør vælge et unikt systemnavn for hver server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:248 msgid "The system name must start with a letter and can be composed of letters, numbers and hyphens." msgstr "Systemnavnet skal starte med et bogstav og kan bestå af bogstaver, tal og bindestreger." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:282 msgid "Invalid system name" msgstr "Ugyldigt systemnavn" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:295 msgid "The specified driver failed to load." msgstr "Den angivne driver kunne ikke indlæses." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:333 msgid "Local networking parameters" msgstr "Lokale netværksparametre" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:335 msgid "Please enter the local IP address for this server." msgstr "Venligst indtast den lokale IP-adresse for denne server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:337 msgid "If this server is the first machine on your network, we recommend accepting the default value unless you have a specific reason to choose something else." msgstr "Hvis denne server er den første maskine på dit netværk, anbefaler vi at du beholder de foreslåede værdier medmindre du har specifikke grunde til at vælge noget andet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:339 msgid "If your server is being installed into an existing network, you must choose an address which is not in use by any other computer on this network." msgstr "Bliver din server installeret ind i et eksisterende netværk skal du vælge en adresse som ikke er i brug på en anden maskine på dit net." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:361 msgid "Invalid local IP address" msgstr "Ugyldig lokal IP-adresse" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:374 msgid "Select local subnet mask" msgstr "Angiv en subnetmaske" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:376 msgid "Please enter the local subnet mask for this server." msgstr "Venligst indtast den lokale subnetmaske for denne server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:378 msgid "If this server is the first machine on your network, we recommend using the default unless you have a specific reason to choose something else." msgstr "Hvis denne server er den første maskine på dit netværk, anbefaler vi at du beholder de foreslåede værdier medmindre du har specifikke grunde til at vælge noget andet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:380 msgid "If your server is being installed into an existing network, you must choose the same subnet mask used by other computers on this network." msgstr "Bliver din server installeret ind i et eksisterende netværk, skal du vælge den samme subnetmaske, som de andre maskiner på dit net." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:403 msgid "Invalid local subnet mask" msgstr "Ugyldig lokal subnetmaske" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:420 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:435 msgid "Server and gateway" msgstr "Server og gateway" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:425 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:436 msgid "Private server and gateway" msgstr "Privat server og gateway" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:430 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:437 msgid "Server-only" msgstr "Kun server" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:442 msgid "Select operation mode" msgstr "Vælg serverens arbejdstilstand" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:445 msgid "If you want this server to act as a gateway to the Internet, choose one of the server and gateway options. Server and gateway mode acts as a firewall and provides an external web and mail server. Private server and gateway mode also acts as a firewall but disables all incoming services." msgstr "Ønsker du at denne server skal fungere som gateway til Internettet vælg en af \"server og gateway\" tilstandene. I 'Server og gateway' tilstand fungerer serveren som brandmur og udbyder extern web- og postserver. I 'Privat server og gateway' tilstand fungerer serveren også som brandmur men afviser alle indkommende tjenester." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:447 msgid "Server-only mode provides services to a local, protected network. If you choose this mode and Internet access is required, the network must be protected by another server configured in server and gateway mode (or another firewall)." msgstr "I 'Kun server' tilstand tilbydes tjenester til et lokalnetværk. Hvis du vælger denne tilstand og Internetadgang er påkrævet må du sikre dit netværk med en anden server i 'Server og gateway' tilstand (eller en anden brandmur)." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:493 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:503 msgid "Server and gateway - dedicated" msgstr "Server og gateway - dedikeret" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:498 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:504 msgid "Server and gateway - dialup" msgstr "Server og gateway - dialup" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:509 msgid "Select external access mode" msgstr "Vælg ekstern adgangsform" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:512 msgid "The next step is to select the access mode that your server will use to connect to the Internet." msgstr "Det næste skridt er at vælge adgangsformen som serveren skal anvende for at få adgang til Internet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:514 msgid "Choose the dedicated option if you access the Internet via a router, a cable modem or ADSL. Choose the dialup option if you use a modem or ISDN connection." msgstr "Vælg 'dedikeret' hvis din adgang foregår via en router, et kablmodem eller en ADSL-linje. Vælg 'dailup' hvis du bruger modem eller en ISDN- linje." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:542 msgid "Only one network adapter" msgstr "Kun et netkort" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:544 msgid "Your system only has a single network adapter. It cannot be used in this configuration." msgstr "Den valgte konfiguration kan ikke bruges, da din server kun har kun ét netkort." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:582 msgid "use DHCP (send account name as client identifier)" msgstr "brug DHCP (send kontonavn til identifikation)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:583 msgid "DHCP with account name" msgstr "DHCP med kontonavn" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:589 msgid "use DHCP (send ethernet address as client identifier)" msgstr "brug DHCP (send netadresse til identifikation)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:590 msgid "DHCP with ethernet address" msgstr "DHCP med netadresse" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:596 msgid "use PPP over Ethernet (PPPoE)" msgstr "brug PPP over Ethernet (PPPoE)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:597 msgid "PPPoE" msgstr "PPPoE" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:603 msgid "use static IP address (do not use DHCP or PPPoE)" msgstr "brug statisk IP-adresse (brug ikke DHCP eller PPPoE)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:604 msgid "static IP" msgstr "statisk IP" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:609 msgid "Use DHCP (send account name as client identifier)" msgstr "Brug DHCP (send kontonavn til identifikation)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:610 msgid "Use DHCP (send ethernet address as client identifier)" msgstr "Brug DHCP (send netadresse til identifikation)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:611 msgid "Use PPP over Ethernet (PPPoE)" msgstr "Brug PPP over Ethernet (PPPoE)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:612 msgid "Use static IP address" msgstr "Brug statisk IP-adresse" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:617 msgid "External Interface Configuration" msgstr "Opsætning af ekstern forbindelse" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:620 msgid "Next, specify how to configure the external ethernet adapter." msgstr "Specificer hvordan dit eksterne netkort skal sættes op." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:622 msgid "For cable modem connections, select DHCP. If your ISP has assigned a system name for your connection, use the account name option. Otherwise use the ethernet address option. For residential ADSL, use PPPoE. For most corporate connections, use a static IP address." msgstr "For kabelmodemforbindelser vælg DHCP. Hvis din Internetudbyder har tildelt dig et kontonavn for din forbindelse, brug navnemuligheden. Hvis ikke, brug netadresse-muligheden. Nogle ADSLforbindelser bruger PPPoE. De fleste virksomhedsforbindelser bruger en statisk IP-adresse." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:675 msgid "Enter ISP assigned hostname" msgstr "Indtast det fra internetudbyderen tildelte navn" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:677 msgid "You have selected DHCP (send account name). Please enter the account name assigned by your ISP. You must enter the account name exactly as specified by your ISP." msgstr "Du har valgt DHCP (send kontonavn). Angiv venligst det kontonavn du har fået tildelt af din internetudbyder. Du skal indtaste kontonavnet præsis som angivet af udbyderen." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:694 msgid "Select PPPoE user account" msgstr "Vælg PPPoE brugerkonto" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:696 msgid "Please enter the user account name for your PPPoE Internet connection. Most PPPoE service providers use an account name and e-mail domain. For example, " msgstr "Venligst indtast kontonavn for din PPPoE forbindelse. De fleste PPPoE udbydere bruger et kontonavn og et postdomæne. F. eks. " #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:714 msgid "Select PPPoE password" msgstr "Angiv PPPoE adgangskode" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:716 msgid "Please enter the password for your PPPoE Internet connection." msgstr "Venligst indtast adgangskode for din PPPoE frobindelse." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:739 msgid "Select static IP address" msgstr "Vælg statisk IP-adresse" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:741 msgid "You have chosen to configure your external Ethernet connection with a static IP address. Please enter the IP address which should be used for the external interface on this server." msgstr "Du har valgt at opsætte din eksterne netforbindelse med en statisk IP-adresse. Angiv venligst serverens eksterne IP-adresse." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:743 msgid "Please note, this is not the address of your external gateway." msgstr "Bemærk: det er ikke gateway-adressen." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:764 msgid "Invalid external IP address" msgstr "Ugyldig ekstern IP-adresse" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:778 msgid "Select subnet mask" msgstr "Vælg subnetmaske" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:780 msgid "Please enter the subnet mask for your Internet connection. A typical subnet mask is 255.255.255.0." msgstr "Venligst angiv subnetmasken for din internetforbindelse. En typisk subnetmaske er 255.255.255.0." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:805 msgid "Invalid address ranges" msgstr "Ugyldig adresse interval" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:807 msgid "" "Internal address range overlaps external address range\n" "\n" "Local interface: %s/%s\n" "External interface: %s/%s\n" "\n" "Please review your settings." msgstr "" "Intern adresse interval lapper over ekstern adresse interval\n" "\n" "Intern netværk: %s/%s\n" "Ekstern netværk: %s/%s\n" "\n" "Kontroller venligst din opsætning." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:833 msgid "Invalid external subnet mask" msgstr "Ugyldig ekstern subnetmaske" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:856 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1471 msgid "Select gateway IP address" msgstr "Vælg gateway IP-adresse" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:858 msgid "Please enter the gateway IP address for your Internet connection." msgstr "Venligst indtast gateway IP-adressen for din Internetforbindelse." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:883 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1507 msgid "Invalid" msgstr "Ugyldig" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:899 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:900 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:901 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:902 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:903 msgid "Set modem port to" msgstr "Sæt modemporten til" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:903 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:937 msgid "ISDN" msgstr "ISDN" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:904 msgid "internal ISDN card" msgstr "internt ISDN-kort" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:909 msgid "Select modem/ISDN port" msgstr "Vælg modem/ISDN -port" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:912 msgid "Please specify which serial port your modem or ISDN terminal adapter is connected to. Select ISDN if you wish to use an internal ISDN card." msgstr "Specificer venligst hvilken seriel port dit modem eller din ISDN-terminal er tilsluttet til. Vælg ISDN hvis du ønsker at bruge et internt ISDN kort." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1090 msgid "ISDN card detected" msgstr "ISDN-kort fundet" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1092 msgid "Do you wish to use the following ISDN card for your Internet connection?" msgstr "Ønsker du at bruge følgende ISDN-kort til din Internetforbindelse?" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1108 msgid "ISDN driver options" msgstr "ISDN-driver indstillinger" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1110 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1174 msgid "You have selected an internal ISDN card." msgstr "Du har valgt et internt ISDN-kort." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1112 msgid "The ISDN software will need to be told what ISDN hardware you have. It may also need to be told what protocol number to use and may need to be given some additional information about your hardware such as the I/O address and interrupt settings." msgstr "ISDN-softwaren skal vide hvilken ISDN-hardware du har. Den må også vide hvilket protokol-nr. der skal bruges og også I/O adresse og IRQ-indstilling." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1114 msgid "This information is provided via an options string. An example is" msgstr "Denne information angives som en initialiseringsstreng. Et eksempel er" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1116 msgid "which would be used to set the" msgstr "som vil blive brugt til at indstille" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1118 msgid "to EURO-ISDN." msgstr "til EURO-ISDN." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1144 msgid "Multiple Subscriber Numbering" msgstr "Ekstra nummering" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1146 msgid "Your ISDN line may have more than one number associated with it known as Multiple Subscriber Numbering (MSN). In order to receive an incoming ISDN call from an ISP or a remote site, you may need to configure your ISDN card with its MSN so that ISDN calls are routed correctly. If you do not know this number, you can leave this value blank." msgstr "Din ISDN-forbindelse kan have flere numre kendt som Multiple Subscriber Numbering (MSN). For at kunne modtage et indkommende opkald skal dit ISDN-kort indstilles med det korrekte nummer. Kender du ikke nummeret, kan du efterlade feltet blankt." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1156 msgid "Invalid Multiple Subscriber Numbering (MSN)" msgstr "Ugyldigt nummer (MSN)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1176 msgid "The driver for this card includes modem emulation software, and modem control commands are used by the networking software to configure and control the ISDN interface card." msgstr "Driveren til dette kort inkluderer modememulerings-software, og modem kommandoer bruges af netvækssoftwaren til at styre ISDN-kortet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1178 msgid "The precise behavior of your ISDN card can be modified by using a specific modem initialization string, to adjust the settings of the card, or to modify its default behavior. Most cards should work correctly with the default settings, but you may enter a modem initialization string here if required." msgstr "ISDN-kortets opførsel kan ændres med en specifik modem-initialiserings-streng. De fleste kort arbejder korrekt med de prædefinerede indstillinger, men du kan angive en initialiseringsstreng her hvis det er påkrævet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1181 msgid "You have selected a modem device." msgstr "Du har valgt et modem." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1183 msgid "The precise behavior of your modem can be modified by using a specific modem initialization string, to adjust the settings of your modem, or to modify its default behavior. You may enter a modem initialization string here." msgstr "Modemets opførsel kan ændres med en specifik modem-initialiserings-streng. De fleste kort modemer arbejder korrekt med de prædefinerede indstillinger, men du kan angive en initialiseringsstreng her hvis det er påkrævet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1185 msgid "Many modems will work correctly without any special settings. If you leave this field blank, the default string of" msgstr "Mange modemer vil fungere korrekt uden specielle indstillinger. Efterlader du dette felt blankt vil de prædefinerede indstillinger for" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1187 msgid "will be used. This turns the modem speaker off, so that you will not be bothered by the noises that a modem makes when it starts a connection." msgstr "blive brugt. Det vil slå højtaleren i modem fra så du undgår støjen når modem opretter sin forbindelse." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1193 msgid "Modem initialization string" msgstr "Modem-initialiserings-streng" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1226 msgid "Select access phone number" msgstr "Vælg adgangs-telefonnummer" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1229 msgid "Please enter the access phone number for your Internet connection. Long distance numbers can be entered. The phone number must not contain spaces, but may contain dashes for readability. Commas may be inserted where a delay is required. For example, if you need to dial 9 first, then wait, then dial a phone number, you could enter" msgstr "Venligst angiv et adgangs-telefonnummer til din Internetforbindelse. Langdistance-telefonnumre kan angives. Nummeret må ikke indeholde mellemrum, men bindestreger kan bruges for at øge læsbarheden. Komma kan angives hvor der er behov for forsinkelser. Har du eksempelvis behov for at vælge 9 først, så en en lille pause, for så at vælge telefonnummeret kan du indtaste" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1256 msgid "Invalid access phone number" msgstr "Ugyldigt adgangstelefonnummer" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1268 msgid "Please enter the user account name for your Internet connection." msgstr "Venligst angiv et brugernavn til din Internetforbindelse." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1270 msgid "Please note that account names are usually case sensitive." msgstr "Bemærk at det normalt ikke er ligegyldigt om du bruger store eller små bogstaver i brugernavne." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1274 msgid "Select dialup user account" msgstr "Vælg 'dialup' brugerkonto" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1290 msgid "Please enter the password for your Internet connection." msgstr "Venligst indtast adgangskoden for din Internetforbindelse." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1292 msgid "Please note that passwords are usually case sensitive." msgstr "Bemærk at det normalt ikke er ligegyldigt om du bruger store eller små bogstaver i adgangskoder." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1296 msgid "Select dialup password" msgstr "Vælg 'dialup' adgangskode" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1338 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1362 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1384 msgid "Select connect policy" msgstr "Vælg en forbindelses-politik" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1341 msgid "Select the dialup connect policy that you would like to use during office hours (8:00 AM to 6:00 PM) on weekdays." msgstr "Vælg en dialup forbindelsespolitik i kontortiden (8:00 AM til 6:00 PM) på hverdage." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1365 msgid "Please select the dialup connect policy that you would like to use outside office hours (6:00 PM to 8:00 AM) on weekdays." msgstr "Vælg venligst en 'dialup'-forbindelses-politik, til perioden udenfor normal kontortid (6:00 PM til 8:00 AM) på hverdage." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1387 msgid "Please select the dialup connect policy that you would like to use during the weekend." msgstr "Vælg venligst en 'dialup'-forbindelses-politik i weekender." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1414 msgid "Enable NIC bonding" msgstr "Aktiver netkortsbinding" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1414 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1428 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1430 msgid "enabled" msgstr "aktiveret" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1415 msgid "Disable NIC bonding" msgstr "Deaktiver netkortsbinding" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1415 msgid "disabled" msgstr "deaktiveret" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1420 msgid "NIC Bonding" msgstr "Netkortsbinding" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1423 msgid "You have more than one network adapter. Would you like to bond them together into a single interface? This can provide greater throughput and/or failure resiliency, depending on your adapters and network configuration." msgstr "Du har mere end et netkort. Ønsker du at bindes samen til en enkelt forbindelse? Det kan give en større netværkskapacitet og/eller forbedre fejltolerance, afhængig af netkortets og netværkets opsætning." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1441 msgid "" "The NIC bonding driver allows various modes and performance options. Edit the option string below if the defaults are not suitable.\n" "\n" "Most users do not need to change this setting.\n" msgstr "" "Netkortets bindingsdriver tillader forskellige former og ydelsesmuligheder. Rediger opsætningsstrengen nedenfor, hvis de prædefinerede indstillinger ikke er passende.\n" "\n" "De fleste bruger behøver ikke at ændre indstillingerne.\n" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1445 msgid "NIC Bonding Options" msgstr "Indstillinger for netkortsbinding" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1473 msgid "In server-only mode, this server will use only one ethernet adapter connected to your local network. If you have a firewall and wish to use this server as your e-mail/web server, you should consult the firewall documentation for networking details." msgstr "I 'kun server'-tilstand vil serveren kun bruge et netkort tilsluttet til dit lokalnet. Har du en brandmur (firewall) og ønsker at bruge serveren som post- og webserver, bør du konsultere brandmurens dokumentation for netværksdetaljer." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1475 msgid "Please specify the gateway IP address that this server should use to access the Internet. Leave blank if you have no Internet access." msgstr "Venligst angiv en gateway IP-adresse til adgang til Internet. Efterlad feltet tomt hvis du ikke har nogen Internetadgang." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1550 msgid "Can't open output file" msgstr "Kan ikke åbne output-fil" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1571 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1576 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1597 msgid "Off" msgstr "Fra" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1571 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1575 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1592 msgid "On" msgstr "Tænd" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1575 msgid "Provide DHCP service to local network" msgstr "Tilbyd DHCP-service til lokalnettet" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1576 msgid "Do not provide DHCP service to local network" msgstr "Tilbyd IKKE DHCP-service til lokalnettet" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1581 msgid "Select DHCP server configuration" msgstr "Vælg DHCP-serveropsætning" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1584 msgid "Please specify whether you would like this server to provide DHCP service to your local network. This will let you assign IP addresses to your other network computers automatically by configuring them to obtain their IP information using DHCP." msgstr "Venligst angiv om du ønsker at serveren tilbyder DHCP-service til lokalnettet. Det vil medføre at de andre computere på lokalnettet kan få tilført en IP-adresse automatisk gennem DHCP." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1586 msgid "We strongly advise that all clients are configured using DHCP." msgstr "Vi vil kraftigt tilråde, at alle klientcomputere får tildelt IP-adresse gennem DHCP." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1620 msgid "Select beginning of DHCP host number range" msgstr "Vælg begyndelsen for DHCP-nummerområdet" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1622 msgid "You must reserve a range of host numbers for the DHCP server to use." msgstr "Du skal reserver et område af værtsnumre til brug for DHCP-serveren." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1624 msgid "Please enter the first host number in this range. If you are using the standard server defaults and have no particular preference, you should keep the default values." msgstr "Venligst angiv det første værtsnummer i dette område. Brug de prædefinerede værdier hvis du ikke har specielle ønsker og bruger en standard-serveropsætning." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1646 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1742 msgid "That address is not on the local network." msgstr "Den adresse er ikke på lokalnettet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1651 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1747 msgid "Invalid IP address for DHCP start" msgstr "Ugyldig IP-adresse til DHCP-start" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1657 msgid "You must provide an IP address for the start of the DHCP range." msgstr "Du skal angive en IP-adresse til begyndelse af DHCP-området." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1683 msgid "Select end of DHCP host number range" msgstr "Vælg slutning for DHCP-værtsnummer-området" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1685 msgid "Please enter the last host address in this range. If you are using the standard server defaults and have no particular preference, you should keep the default value. Think to add enough ip for vpn sessions." msgstr "Angiv den sidste værtsadresse i dette område. Brug de prædefinerede værdier hvis du ikke har specielle ønsker og bruger en standard-serveropsætning. Overvej at tilføje nok ip til VPN sessioner." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1725 msgid "There is not enough IP in the range to include all your vpn sessions" msgstr "Der er ikke nok IP i dette område til alle dine VPN sessioner" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1730 msgid "The IP range cannot include our private network address." msgstr "IP-området kan ikke inkludere serverens lokale netværksadresse." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1736 msgid "The end of the range must be larger than the start." msgstr "Tallet for slutningen af området skal være større end tallet for begyndelsen." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1753 msgid "You must provide an IP address for the end of the DHCP range." msgstr "Du skal angive en IP-adresse for slutningen af DHCP-området." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1773 msgid "Corporate DNS server address" msgstr "Firmaets DNS-server-adresse" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1775 msgid "If this server does not have access to the Internet, or you have special requirements for DNS resolution, enter the DNS server IP address here." msgstr "Har denne server ikke adgang til Internet, eller hvis du har specielle behov for DNS-bestemmelse angiv DNS-serverens IP-adresse her." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1777 msgid "This field should be left blank unless you have a specific reason to configure another DNS server." msgstr "Efterlad dette felt tomt, medmindre du har specielle grunde til at angive en anden DNS-server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1779 msgid "You should not enter the address of your ISP's DNS servers here, as the server is capable of resolving all Internet DNS names without this additional configuration." msgstr "Du bør ikke angive din Internetudbyders DNS-server her, idet denne server er i stand til at bestemme Internet DNS navne uden yderligere opsætning." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1809 msgid "Invalid IP address for DNS forwarder" msgstr "Ugyldig IP-adresse for DNS-server" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1825 msgid "No unsaved changes" msgstr "Ingen ændringer der ikke er gemt" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1827 msgid "No changes were made during the configuration process" msgstr "Der var ingen ændringer i opsætningen" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1829 msgid "Press ENTER to proceed." msgstr "Tast ENTER for at fortsætte." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1830 msgid "Finish" msgstr "Slut" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1843 msgid "Changes will take effect after reboot" msgstr "Ændringer vil blive udført ved genstart" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1845 msgid "The new configuration will take effect when you reboot the server." msgstr "Den nye opsætning vil blive anvendt når serveren bliver genstartet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1847 msgid "Do you wish to reboot right now?" msgstr "Ønsker du at genstarte nu?" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1865 msgid "Activate configuration changes" msgstr "Aktiverer ændringer i opsætning" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1867 msgid "Your configuration changes will now be activated. The configuration files on this server will be changed to reflect your new settings. This may take a few minutes." msgstr "Dine ændringer vil blive aktiveret nu. Opsætningsfilerne på denne server bliver ændret i overenstemmelse med de nye indstillinger. Dette vil vare nogle et lille stykke tid." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1869 msgid "Do you wish to activate your changes?" msgstr "Ønsker du at aktivere dine ændringer?" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1884 #: root/usr/share/perl5/vendor_perl/esmith/console/save_config.pm:27 msgid "Activating configuration settings" msgstr "Aktiverer ændringer i opsætningen" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1885 #: root/usr/share/perl5/vendor_perl/esmith/console/save_config.pm:28 msgid "Please stand by while your configuration settings are activated ..." msgstr "Vent venligst mens dine ændringer bliver aktiveret ..." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1916 #: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:34 msgid "*** THERE ARE UNACTIVATED CHANGES - QUIT ANYWAY? ***" msgstr "*** DER ER ÆNDRINGER DER IKKE ER AKTIVERET - ØNSKER DU AT AFSLUTTE ALLIGEVEL? ***" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1919 #: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:37 msgid "Your configuration changes have been saved but have not yet been activated. This may result in unpredictable system behavior. We recommend that you complete the configuration process and activate the changes before exiting the console." msgstr "Dine ændringer er blevet gemt, men er ikke aktiveret endnu. Dette kan føre til uforudsigelig systemadfærd. Vi anbefaler at du gennemfører opsætningsprocessen og aktiverer ændringerne inden du forlader konsollen." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1921 #: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:39 msgid "Are you sure you want to quit with unactivated changes?" msgstr "Er du sikker på du vil afbryde med ikke aktiverede ændringer?" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:25 msgid "Perform backup to removable media" msgstr "Gennemfør sikkerhedskopi til flytbart medie" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:85 msgid "Could not create backup file on device" msgstr "Kunne ikke lave sikkerhedskopi-fil på enheden" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:150 msgid "Backup failed. Look at the log files for more details." msgstr "Sikkerhedskopi fejlede. kik i log-filen for yderligere oplysninger." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:150 msgid "Backup successfully created." msgstr "Sikkerhedskopiering gennemført." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:171 msgid "Create Backup to removable media" msgstr "Lav sikkerhedskopi på flytbart medie" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:173 msgid "Do you wish to create a backup on removable media?" msgstr "Ønsker du at sikkerhedskopiere til et flytbart medie?" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:174 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:173 msgid "Insert removable media before proceeding." msgstr "Tilslut flytbart medie før du fortsætter." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:175 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:174 msgid "It may take many seconds to scan for media." msgstr "Det kan godt tage lang tid at skanne efter medier." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:191 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:202 msgid "These filesystems are not valid:" msgstr "Disse filsystemer kan ikke anvendes." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:194 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:205 msgid "Reason" msgstr "Årsag" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:200 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:209 msgid "No valid backup device found" msgstr "Der er ikke fundet et brugbart backup medie" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:200 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:220 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:228 msgid "size" msgstr "størrelse" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:206 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:215 msgid "Try again" msgstr "Venligst prøv igen" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:219 msgid "The following are valid for backup" msgstr "De følgende er brugbare til backup" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:228 msgid "Choose device to use for backup" msgstr "Vælg enhed til sikkerhedskopi" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:242 msgid "Some parts are excluded of your backup" msgstr "Nogle dele af din backup er ikke medtaget" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:251 msgid "Preparing for backup" msgstr "Forbereder sikkerhedskopi" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:252 msgid "Please stand by while the system is prepared for backup..." msgstr "Vent venligst mens systemet forbereder sikkerhedskopien..." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:257 msgid "Creating backup file" msgstr "Laver sikkerhedskopi" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:265 msgid "Backup complete" msgstr "Sikkerhedskopien er færdig" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:266 msgid "Remove backup media." msgstr "Fjern sikkerhedskopi medie." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:21 msgid "Restore from removable media" msgstr "Gendan fra sikkerhedskopi på flytbart medie" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:137 msgid "Restore failed. Your system is likely in an inconsistent state - look at the log files for more details." msgstr "Gendannelse mislykkedes. Dit system er sandsynligvis i en inkonsekvent tilstand - se logfilerne for flere detaljer." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:140 msgid "Restore successful." msgstr "Gendannelse gennemført med succes." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:170 msgid "Restore From Backup" msgstr "Gendan fra sikkerhedskopi" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:172 msgid "Do you wish to restore from backup?" msgstr "Ønsker du at gendanne fra sikkerhedskopi?" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:189 msgid "These filesystems could hold backups" msgstr "På disse filsystemer kan der placeres sikkerhedskopier " #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:234 msgid "Date" msgstr "Dato" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:235 msgid "Size" msgstr "Størrelse" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:239 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:264 msgid "Start restore from backup" msgstr "Start gendan fra sikkerhedskopi" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:241 msgid "Backup found on device" msgstr "Sikkerhedskopi fundet på medie" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:243 msgid "Backup details" msgstr "Detaljer om sikkerhedskopi" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:245 msgid "Do you wish to restore from this file?" msgstr "Ønsker du at gendanne fra denne fil?" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:252 msgid "Backups found on these devices" msgstr "Sikkerhedskopi er fundet på disse medier" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:267 msgid "Please select the backup that you wish to restore from." msgstr "Vælg hvilken sikkerhedskopi du ønsker af gendanne fra." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:283 msgid "Preparing for restore" msgstr "Forbereder gendannelse" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:284 msgid "Please stand by while the system is prepared for restore..." msgstr "Vent venligst mens systemet forbereder gendannelse..." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:293 msgid "Restoring from backup" msgstr "Gendan fra sikkerhedskopi" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:309 msgid "Restore Complete" msgstr "Gendannelse gennemført" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:310 msgid "You must restart your system to finish the restore." msgstr "Du skal genstarte systemet for at færdiggøre gendannelse" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:311 msgid "Do you want to restart now?" msgstr "Ønsker du at genstarte nu?" #: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:10 msgid "Exit from the server console" msgstr "Afslut serverkonsollen" #: root/usr/share/perl5/vendor_perl/esmith/console/startup.pm:112 msgid "Starting system services" msgstr "starter systemtjenester" #: root/usr/share/perl5/vendor_perl/esmith/console/startup.pm:114 msgid "Please standby while system services are started ..." msgstr "Vent venligst mens system services starter ..." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:30 #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:109 msgid "Choose administrator password" msgstr "Vælg administrator-adgangskode" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:34 msgid "You will now be taken through a sequence of screens to perform basic networking configuration on this server." msgstr "Du vil nu blive ført gennem en række skærmbilleder til udformning af den basale netværksopsætning på denne server." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:36 msgid "You can make your selections in each screen using the Arrow and Tab keys. At any point, if you select Back you will be returned to the previous screen." msgstr "Brug pile-taster og Tabulator-tasten til at udføre dine valg. Alle steder kan du vælge 'Tilbage' for at komme til det forgående skærmbillede." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:38 msgid "Before you start, you must first choose the administrator password for your system and enter it below. You will not see the password as you enter it." msgstr "Inden du begynder, skal du indtaste en administrator-adgangskode nedenfor. Du vil ikke kunne se din indtastning." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:45 #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:117 msgid "Administrator password not set" msgstr "Administrator-adgangskoden er ikke indsat" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:46 #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:118 msgid "Sorry, you must set the administrator password now." msgstr "Desværre, du skal angive en administrator-adgangskode nu." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:56 msgid "Unprintable characters in password" msgstr "Ikke printbare tegn i adgangskoden" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:57 msgid "The password must contain only printable characters." msgstr "Adgangskoden må kun indeholde printbare tegn." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:70 msgid "it is based on your username" msgstr "bygger på dit brugernavn" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:71 msgid "it is based upon your password entry" msgstr "bygger på din adgangskode" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:72 msgid "it is derived from your password entry" msgstr "er afledt af din adgangskode" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:73 msgid "it is derivable from your password entry" msgstr "er afledbart fra din adgangskode" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:74 msgid "it is too short" msgstr "er for kort" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:75 msgid "it is all whitespace" msgstr "består kun af blanktegn" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:76 msgid "it is too simplistic/systematic" msgstr "er for simpelt/systematisk" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:77 msgid "it is based on a dictionary word" msgstr "er afledt af et ordbogsopslag" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:78 msgid "it is based on a (reversed) dictionary word" msgstr "er afledt af et (omvendt) ordbogsopslag" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:79 msgid "it does not contain numbers" msgstr "indeholder ikke tal" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:80 msgid "it does not contain uppercase characters" msgstr "indeholder ikke store bogstaver" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:81 msgid "it does not contain lowercase characters" msgstr "indeholder ikke små bogstaver" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:82 msgid "it does not contain special characters" msgstr "indeholder ikke speciel tegn" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:91 msgid "Software error: password check failed" msgstr "Programfejl: Adgangskodekontrollen fejlede" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:96 msgid "Bad Password Choice" msgstr "Dårligt valg af adgangskode" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:98 msgid "The password you have chosen is not a good choice, because " msgstr "Adgangskoden er dårlig fordi " #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:101 msgid "Do you wish to choose a better one?" msgstr "Ønsker du at vælge en bedre?" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:110 msgid "Please type your administrator password again to verify." msgstr "Indtast venligst adgangskoden igen for at bekræfte den." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:128 msgid "Passwords do not match" msgstr "Adgangskoderne er ikke ens" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:129 msgid "The two passwords did not match" msgstr "De to adgangskoder er ikke ens" #~ msgid "The server has detected these ethernet adapters:" #~ msgstr "Serveren har fundet følgende netkort:" #~ msgid "You now need to select the proper driver for your %s network ethernet adapter. The server can attempt to do this automatically, or you can do it manually - either by specifying the model of your ethernet adapter or by directly choosing a driver." #~ msgstr "Du er nødt til at vælge den rette driver til dit %s netkort. Serveren kan forsøge at gøre dette automatisk eller du kan gøre det manuelt - enten ved at specificere netkortet eller ved at vælge driveren direkte." #~ msgid "Please select which device should be used for the backup file." #~ msgstr "Vælg hvilken enhed der skal bruges til sikkerhedskopi." #~ msgid "Please select whether you want to operate in normal or swapped mode." #~ msgstr "Vælg venligst om du ønsker at anvende 'normal' eller 'ombyttet' tilstand." #~ msgid "You have two Ethernet cards which use the same driver. The server will automatically designate one for your local network (called eth0) and one for your external Internet connection (called eth1). If this default assignment is not appropriate for your situation, you can select the opposite assignment using swapped mode. Most installations can accept the default setting of normal." #~ msgstr "Du har to netkort som bruger samme driver. Serveren vil automatisk tildele et til dit lokalnet (kaldet eth0) og et til din eksterne Internetforbindelse (kaldet eth1). Hvis denne tildeling ikke passer til din situation, kan du vælge den modsatte tildeling ved at vælge 'ombyttet' tilstand. De fleste installationer kan bruge de forud givne indstillinger." #~ msgid "Select ethernet card assignment" #~ msgstr "Vælg netkorttildeling" #~ msgid "swapped" #~ msgstr "ombyttet" #~ msgid "eth1 is local, eth0 is external" #~ msgstr "eth1 er lokal, eth0 er ekstern" #~ msgid "normal" #~ msgstr "normal" #~ msgid "eth0 is local, eth1 is external" #~ msgstr "eth0 er lokal, eth1 er ekstern" #~ msgid "Please specify the driver to use for the %s ethernet adapter" #~ msgstr "Venligst specificer driveren til brug for %s netkort" #~ msgid "Specify %s ethernet driver" #~ msgstr "Specificer %s netkortdriver" #~ msgid "Please specify your %s ethernet adapter and corresponding driver" #~ msgstr "Venligst specificer dit %s netkort og tilhørende driver" #~ msgid "Specify %s adapter and driver" #~ msgstr "Specificer %s kort og driver" #~ msgid "Please select one of the following:" #~ msgstr "Venligst vælg et af følgende:" #~ msgid "Select %s adapter manually" #~ msgstr "Vælg %s kort manuelt" #~ msgid "Choose driver directly" #~ msgstr "Vælg driver direkte" #~ msgid "Choose driver by specifying ethernet adapter model" #~ msgstr "Vælg driver ved at specificere netkortmodel" #~ msgid "unknown" #~ msgstr "ukendt" #~ msgid "Manually select driver for %s ethernet adapter" #~ msgstr "Vælg driver for %s netkort manuelt" #~ msgid "internal" #~ msgstr "intern" #~ msgid "for chipset" #~ msgstr "for chipset" #~ msgid "Success" #~ msgstr "Succes" #~ msgid "You can scroll through this document using the up and down arrow keys or the Page Up and Page Down keys." #~ msgstr "Du kan rulle gennem dette dokument med pile-, Page Up og Page Down tasterne." #~ msgid "Mitel Networks Corporation support and licensing information" #~ msgstr "Mitel Networks Corporations support- og licensinformation" #~ msgid "bytes" #~ msgstr "bytes" #~ msgid "Backup file found:" #~ msgstr "Sikkerhedskopien er fundet:" #~ msgid "Backup file not found" #~ msgstr "Sikkerhedskopien blev ikke fundet" #~ msgid "Choose device to restore from" #~ msgstr "Vælg enhed til indlæsning af sikkehedskopi" #~ msgid "No removable media or device found" #~ msgstr "Der er ikke fundet noget medie" #~ msgid "Backup medium not found" #~ msgstr "Enhed til sikkerhedskopi er ikke fundet" #~ msgid "Insert removable media containing your backup file, then hit the enter key." #~ msgstr "Indsæt flytbart medie med sikkerhedskopien og tast enter." #~ msgid "Insert media containing backup" #~ msgstr "Indsæt mediet der indeholder sikkerhedskopien" #~ msgid "Remove removable media, then hit the enter key." #~ msgstr "Fjern flytbart medie, og tast enter." #~ msgid "No mountable backup medium" #~ msgstr "Der er ikke fundet et skrivbart medie til backup" #~ msgid "No removable and/or writable media or device found" #~ msgstr "Der er ikke fundet et flytbart og/eller skrivbart medie" #~ msgid "Writable backup medium not found" #~ msgstr "Der er ikke fundet et skrivbart medie til backup" #~ msgid "Insert media to use for backup" #~ msgstr "Indsæt et medie til sikkerhedskopi" #~ msgid "This configuration is not yet fully supported in these screens." #~ msgstr "Denne konfiguration er ikke fuldt ud understøttet på disse skærmsider." #~ msgid "The free and used disk count must equal one." #~ msgstr "Antallet af anvendte og ledige diske skal være ens." #~ msgid "Please enter the password for your dynamic DNS service" #~ msgstr "Indtast venligst en adgangskode for dynamisk DNS-service" #~ msgid "Select dynamic DNS password" #~ msgstr "Vælg dynamisk DNS adgangskode" #~ msgid "Please enter the account name for your dynamic DNS service" #~ msgstr "Angiv venligst et kontonavn for dynamisk DNS-service" #~ msgid "Select dynamic DNS account" #~ msgstr "Vælg dynamisk DNS-konto" #~ msgid "Choose which dynamic DNS service you would like to use." #~ msgstr "Vælg hvilken dynamisk DNS-service du ønsker at bruge." #~ msgid "Please specify whether you wish to subscribe to a dynamic DNS service. Such services allow you to have a domain name without a static IP address, and are available from various organizations for free or for a reasonable charge. A notification must be sent to the dynamic DNS service whenever your IP address changes. Your server can automatically do this for some dynamic DNS services." #~ msgstr "Angiv venligst om du ønsker at abonnere på en dynamisk DNS-service. Det giver dig mulighed for at have eget domæne uden fast IP-adresse, og tilbydes af varierende organisationer gratis eller for et mindre vederlag. Der sendes en besked til den dynamiske DNS-service hver gang din IP-adresse skifter. Din server kan gøre dette automatisk hos nogle udbydere." #~ msgid "Select dynamic DNS service" #~ msgstr "Vælg dynamisk DNS-service" #~ msgid "custom DynDNS service" #~ msgstr "selvvalgt DynDNS service" #~ msgid "commercial service" #~ msgstr "kommerciel service" #~ msgid "free service" #~ msgstr "gratis service" #~ msgid "Do not use a dynamic DNS service" #~ msgstr "Brug ikke en dynamisk DNS-service" #~ msgid "Cannot read directory" #~ msgstr "Kan ikke læse biblioteket"