msgid "" msgstr "" "Language: it\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:16 msgid "Manage disk redundancy" msgstr "Gestione RAID" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:42 msgid "Disk redundancy status as of" msgstr "Stato RAID" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:43 msgid "Current RAID status:" msgstr "Stato attuale dei dischi RAID:" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:52 msgid "There are no RAID devices configured" msgstr "Non ci sono dispositivi RAID configurati" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:93 msgid "A RAID resynchronization is in progress." msgstr "Sincronizzazione RAID in corso." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:101 msgid "Only some of the RAID devices are unclean or contain failed disks." msgstr "Solo alcuni dispositivi RAID non sono allineati o contengono dischi guasti." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:103 msgid "Manual intervention may be required." msgstr "Può essere richiesto un intervento manuale." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:112 msgid "All RAID devices are in a clean state." msgstr "Tutti i dispositivi RAID sono allineati" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:120 msgid "All RAID devices are in an unclean state or contain failed disks." msgstr "Tutti i dispositivi RAID sono degradati o contengono dischi guasti." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:125 msgid "Current disk status:" msgstr "Attuale stato dei dischi:" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:126 msgid "Installed disks" msgstr "Dischi installati" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:128 msgid "Used disks" msgstr "Dischi utilizzati" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:130 msgid "Free disks" msgstr "Dischi non utilizzati" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:139 msgid "To ensure continued redundancy, please shut down, install another drive of the same capacity and then return to this screen." msgstr "Per abilitare il RAID software, spegnere il server, installare un secondo disco (della stessa capacità) e ritornare in questo menu." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:150 msgid "Your RAID devices are in an inconsistent state, and no spare drives were detected. You may need to manually remove a failed drive from your arrays using mdadm." msgstr "I dispositivi RAID sono malfunzionanti e non è stato rilevato un disco \"spare\". Può essere necessario rimuovere manualmente un disco guasto dagli array utilizzando mdadm." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:161 msgid "Multiple spare drives have been detected. This utility can only add one drive at a time. Please either shut down and remove all but one of your spare drives, or configure your array manually." msgstr "Sono stati rilevati più dischi \"spare\". Questa utility può aggiungere un solo disco per volta. Spegnere il sistema rimuovendo tutti i dischi \"spare\" tranne uno o configurare manualmente l'array." #: root/sbin/e-smith/console-menu-items/manageRAID.pl:170 msgid "There is an unused disk drive in your system. Do you want to add it to the existing RAID array(s)?" msgstr "C'è un disco non utilizzato installato nel sistema. Si desidera aggiungerlo all'array RAID esistente?" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:172 msgid "WARNING: ALL DATA ON THE NEW DISK WILL BE DESTROYED!" msgstr "ATTENZIONE: TUTTI I DATI SUL NUOVO DISCO SARANNO ELIMINATI!" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:185 msgid "The command failed:" msgstr "Il comando ha riportato un errore:" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:195 msgid "Couldn't open" msgstr "Impossibile aprire" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:212 #: root/sbin/e-smith/console-menu-items/manageRAID.pl:225 msgid "Couldn't call" msgstr "Impossibile chiamare" #: root/sbin/e-smith/console-menu-items/manageRAID.pl:267 msgid "Couldn't read" msgstr "Impossibile leggere" #: root/sbin/e-smith/console-menu-items/reboot.pl:11 msgid "Reboot, reconfigure or shut down this server" msgstr "Riavvia, riconfigura o spegni questo server" #: root/sbin/e-smith/console-menu-items/reboot.pl:36 #: root/sbin/e-smith/console-menu-items/reboot.pl:62 msgid "Reboot" msgstr "Riavvio" #: root/sbin/e-smith/console-menu-items/reboot.pl:36 msgid "Reboot this server" msgstr "Riavvia il server" #: root/sbin/e-smith/console-menu-items/reboot.pl:37 #: root/sbin/e-smith/console-menu-items/reboot.pl:67 msgid "Reconfigure" msgstr "Riconfigura" #: root/sbin/e-smith/console-menu-items/reboot.pl:37 msgid "Reconfigure this server" msgstr "Riconfigura il server" #: root/sbin/e-smith/console-menu-items/reboot.pl:38 #: root/sbin/e-smith/console-menu-items/reboot.pl:57 msgid "Shutdown" msgstr "Arresta" #: root/sbin/e-smith/console-menu-items/reboot.pl:38 msgid "Shutdown this server" msgstr "Arresta il sistema" #: root/sbin/e-smith/console-menu-items/reboot.pl:43 msgid "Reboot, reconfigure or shutdown this server" msgstr "Riavvia, riconfigura o spegni questo server" #: root/sbin/e-smith/console-menu-items/reboot.pl:45 msgid "Please select whether you wish to reboot, reconfigure or shutdown. The process will start as soon as you make your selection." msgstr "Selezionare se si desidera Riavviare o Arrestare il sistema. Il processo inizierà subito dopo aver fatto la selezione." #: root/sbin/e-smith/console-menu-items/reboot.pl:47 msgid "If you have an older computer without power management, the shutdown process will perform a clean halt of all system services, but will not actually power off your computer. In this case, wait for the power down message and then shut off the power manually." msgstr "Se si dispone di un computer vecchio senza la gestione dell'alimentazione, il processo d'arresto del sistema fermerà tutti i servizi del sistema, ma non toglierà l'alimentazione al computer. In questo caso, aspettare il messaggio 'Power down' e poi togliere l'alimentazione manualmente." #: root/sbin/e-smith/console-menu-items/reboot.pl:49 msgid "If you have changed your mind and do not want to reboot or shutdown, use the Tab key to select Cancel, then press Enter." msgstr "Se non si vuole più riavviare o spegnere, usare il tasto Tab per selezionare Annulla e poi premere Invio." #: root/sbin/e-smith/console-menu-items/reboot.pl:51 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:207 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:231 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:244 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:216 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:269 msgid "Cancel" msgstr "Annulla" #: root/sbin/e-smith/console-menu-items/reboot.pl:52 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:232 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:270 msgid "OK" msgstr "OK" #: root/sbin/e-smith/console-menu-items/serverManager.pl:11 #: root/sbin/e-smith/console-menu-items/serverManager.pl:37 msgid "Access server manager" msgstr "Accedi al server-manager" #: root/sbin/e-smith/console-menu-items/serverManager.pl:39 msgid "This option will start a text-mode browser to access the server manager from this console. Normally you would access the server manager from a web browser at the following url:" msgstr "Questa opzione lancerà un browser in modalità testo per accedere alla gestione del server dalla console. Normalmente per accedere alla gestione del server da un browser web digitare il seguente url:" #: root/sbin/e-smith/console-menu-items/serverManager.pl:43 msgid "You should only proceed if you are comfortable using a text-mode browser. Note that you will be prompted for the administrator password in order to access the server manager." msgstr "Continuare solo se si sta usando un browser in modalità testuale. Una finestra di dialogo chiederà la password dell'amministratore per accedere al server manager." #: root/sbin/e-smith/console-menu-items/serverManager.pl:45 msgid "NOTE: The 'q' key is used to quit from the text-mode browser." msgstr "NOTE: Per uscire dal browser in modalità testuale utilizzare il carattere 'q'." #: root/sbin/e-smith/console-menu-items/serverManager.pl:47 msgid "Do you wish to proceed?" msgstr "Si desidera continuare?" #: root/sbin/e-smith/console-menu-items/status.pl:11 msgid "Check status of this server" msgstr "Controllo lo stato del server" #: root/sbin/e-smith/console-menu-items/status.pl:60 msgid "Status of this server as of" msgstr "Stato del server" #: root/sbin/e-smith/console-menu-items/status.pl:62 msgid "This server has been running for" msgstr "Questo server è attivo da" #: root/sbin/e-smith/console-menu-items/status.pl:63 msgid "days" msgstr "giorni" #: root/sbin/e-smith/console-menu-items/status.pl:64 msgid "hours" msgstr "ore" #: root/sbin/e-smith/console-menu-items/status.pl:65 msgid "minutes" msgstr "minuti" #: root/sbin/e-smith/console-menu-items/support.pl:11 msgid "View support and licensing information" msgstr "Visualizza informazioni sul supporto e la licenza d'uso." #: root/sbin/e-smith/console-menu-items/support.pl:37 msgid "Support and licensing information" msgstr "Informazioni sul supporto e la licenza d'uso." #: root/sbin/e-smith/console-menu-items/testInternet.pl:10 #: root/sbin/e-smith/console-menu-items/testInternet.pl:33 msgid "Test Internet access" msgstr "Prova l'accesso Internet" #: root/sbin/e-smith/console-menu-items/testInternet.pl:35 msgid "After your Internet connection is operational and your server has been connected and configured, this test will verify that your server can communicate with the Internet." msgstr "Con una connessione ad Internet funzionante e il server connesso e configurato, questo test verificherà se il server può comunicare con Internet." #: root/sbin/e-smith/console-menu-items/testInternet.pl:37 msgid "As part of this test, two pieces of information will be sent to koozali.org - the version installed on your server and a string used to differentiate your server from others using this test. This string is generated by a one-way hash function and access to the string does not provide any information about your server." msgstr "Durante questo test, alcune informazioni saranno inviate a koozali.org - la versione di SME installata sul tuo server e una stringa univoca per distinguere il tuo server dagli altri che eseguoono questo test. Questa stringa è generata da una funzione di hash unidirezionale e l'accesso ad essa non fornisce alcuna informazione sul tuo server." #: root/sbin/e-smith/console-menu-items/testInternet.pl:39 msgid "We appreciate your assistance in sending this information so we can gain an accurate count of the installed servers." msgstr "Apprezziamo la tua collaborazione nell'inviare queste informazioni affinchè possiamo ottenere un accurato censimento dei server installati." #: root/sbin/e-smith/console-menu-items/testInternet.pl:41 msgid "Do you wish to run the test?" msgstr "Si desidera effettuare il test?" #: root/sbin/e-smith/console-menu-items/testInternet.pl:47 msgid "Attempting to test Internet connection." msgstr "Tentativo di test della connessione Internet." #: root/sbin/e-smith/console-menu-items/testInternet.pl:48 msgid "If this test takes too long, please halt it by typing Ctrl-C." msgstr "Se il test impiega molto tempo, premere Ctrl-C per interromperlo." #: root/sbin/e-smith/console-menu-items/testInternet.pl:55 msgid "Internet connection successful" msgstr "Connessione Internet riuscita" #: root/sbin/e-smith/console-menu-items/testInternet.pl:57 msgid "The test was successful! Your server was able to communicate with koozali.org." msgstr "Il test è terminato con successo! Il server è riuscito a comunicare con koozali.org." #: root/sbin/e-smith/console-menu-items/testInternet.pl:64 msgid "Internet connection failed" msgstr "Connessione ad internet non riuscita" #: root/sbin/e-smith/console-menu-items/testInternet.pl:66 msgid "The test failed. Your server was unable to establish contact with koozali.org via the Internet." msgstr "Il test è fallito. Il server non può stabilire un contatto con koozali.org attraverso Internet." #: root/sbin/e-smith/console-menu-items/testInternet.pl:68 msgid "Please check that your server is correctly configured. A reboot may be required if certain settings are modified and the configuration process will advise you if this is required." msgstr "Verificare se il server è correttamente configurato. Potrebbe essere necessario un riavvio se alcune configurazioni sono cambiate. Il processo di configurazione avviserà se necessario." #: root/sbin/e-smith/console-menu-items/testInternet.pl:70 msgid "You might also want to check with your Internet provider to make sure that your Internet connection is working properly." msgstr "Verificare con il proprio provider che la connessione Internet funzioni correttamente." #: root/sbin/e-smith/console-menu-items/testInternet.pl:72 msgid "It is also possible (although unlikely) that there is a technical problem at the koozali.org site. In this case, you should proceed with your installation and run this test again later." msgstr "E' possibile (sebbene improbabile) che ci sia un problema tecnico sul sito koozali.org. In questo caso, procedere con l'installazione e eseguire nuovamente il test in seguito." #: root/sbin/e-smith/console.pl:88 msgid "Server console" msgstr "Console del server" #: root/sbin/e-smith/console.pl:91 msgid "** unsaved changes **" msgstr "* modifiche non salvate *" #: root/sbin/e-smith/console.pl:98 #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:32 msgid "Welcome to the server console!" msgstr "Benvenuti nella console del server!" #: root/sbin/e-smith/console.pl:100 msgid "Use the Arrow and Tab keys to make your selection, then press Enter." msgstr "Usare il tasto Tab e i tasti cursore per selezionare una voce, poi premere Invio." #: root/sbin/e-smith/console.pl:102 msgid "Exit" msgstr "Esci" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:86 msgid "Bad ttyname:" msgstr "Nome tty errato:" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:89 msgid "Can't redirect stdin" msgstr "Impossibile redirigere stdin" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:90 msgid "Can't redirect stdout" msgstr "Impossibile redirigere stdout" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:93 msgid "Can't fork" msgstr "Fork non riuscita" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:143 msgid "Couldn't create pipe" msgstr "Non posso creare il file di backup sulla periferica" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:149 msgid "Couldn't fork" msgstr "Fork del processo non riuscita" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:160 msgid "Couldn't close reading end of pipe" msgstr "Impossibile chiudere il lato di lettura del canale" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:168 msgid "Couldn't connect STDERR to pipe" msgstr "Impossibile connettere lo STDERR al canale" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:171 msgid "Couldn't close writing end of pipe" msgstr "Impossibile chiudere il lato di scrittura del canale" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:185 msgid "Couldn't exec:" msgstr "Impossibile eseguire:" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:237 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:269 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:292 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:353 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:437 msgid "Back" msgstr "Indietro" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:238 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:270 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:293 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:354 #: root/usr/share/perl5/vendor_perl/esmith/console.pm:438 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:243 msgid "Next" msgstr "Avanti" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:264 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:201 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:210 msgid "please try again" msgstr "Riprova" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:321 msgid "Yes" msgstr "Si" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:322 msgid "No" msgstr "No" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:462 msgid "Keep the current setting" msgstr "Mantenere l'impostazione attuale" #: root/usr/share/perl5/vendor_perl/esmith/console.pm:464 msgid "keep" msgstr "Mantieni" #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:29 msgid "Inconsistent system state" msgstr "Stato del sistema inconsistente" #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:31 msgid "********** Inconsistent system state detected ***********" msgstr "*********** Stato del sistema inconsistente **********" #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:33 msgid "The restoration of a system backup was running and incomplete at the time of the last reboot. The system should not be used in this state." msgstr "Al momento dell'ultimo riavvio era in corso un backup di sistema che è risultato incompleto. Il sistema non dovrebbe essere utilizzato in questo stato." #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:35 msgid "Consult the User Guide for further instructions." msgstr "Consultare la guida utente per trovare ulteriori istruzioni." #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:40 msgid "System will be halted" msgstr "Il sistema verrà arrestato" #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:42 msgid "The server will now be halted." msgstr "Il sistema verrà arrestato ora." #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:44 msgid "Consult the User Guide for recovery instructions." msgstr "Consultare la guida utente per trovare le istruzioni." #: root/usr/share/perl5/vendor_perl/esmith/console/backup_running.pm:46 msgid "Do you wish to halt the system right now?" msgstr "Si desidera arrestare il sistema?" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:21 msgid "Configure this server" msgstr "Configura il server" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:99 msgid "Use" msgstr "Usa" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:114 msgid "local" msgstr "locale" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:115 msgid "external" msgstr "esterno" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:120 msgid "Select %s network device" msgstr "Selezionare la scheda ethernet %s" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:124 msgid "You now need to select the proper device for your %s network. The server can attempt to do this automatically, or you can do it manually. The network driver, MAC address and model of your network adapter are listed below.\n" msgstr "Selezionare l'adattatore ethernet per la rete %s. Il server tenterà di rilevarlo automaticamente, ma è possibile selezionarlo manualmente. Il modello dell'adattatore ethernet, il mac-address e il modello della scheda di rete sono elencati di seguito.\n" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:179 msgid "No network interfaces found" msgstr "Interfacce di rete non trovate" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:180 msgid "The installer can't continue because no network interfaces are installed or recognised. Please install at least one network interface." msgstr "L'installatore non può proseguire a causa della mancanza di una scheda di rete. Installare almeno una scheda di rete." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:194 msgid "Primary domain name" msgstr "Nome del dominio primario" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:196 msgid "Please enter the primary domain name for your server." msgstr "Inserire il nome del dominio primario del server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:198 msgid "This will be the default domain for your e-mail and web server. Virtual domains can be added later using the server manager." msgstr "Questo sarà il dominio di default per il server Web e il server di posta. Eventuali domini virtuali potranno essere aggiunti successivamente utilizzando il server-manager." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:224 msgid "Invalid domain name" msgstr "Nome di dominio non valido" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:242 msgid "Select system name" msgstr "Nome del sistema" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:244 msgid "Please enter the system name for your server." msgstr "Inserire il nome di sistema per il server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:246 msgid "You should select unique system names for each server." msgstr "Scegliere un nome di sistema unico per ogni server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:248 msgid "The system name must start with a letter and can be composed of letters, numbers and hyphens." msgstr "Il nome del sistema deve iniziare con una lettera e può contenere lettere, numeri e trattini." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:282 msgid "Invalid system name" msgstr "Nome del sistema non valido" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:295 msgid "The specified driver failed to load." msgstr "Il drive specificato non è stato caricato." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:333 msgid "Local networking parameters" msgstr "Parametri di rete locale" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:335 msgid "Please enter the local IP address for this server." msgstr "Inserire l'indirizzo IP locale del server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:337 msgid "If this server is the first machine on your network, we recommend accepting the default value unless you have a specific reason to choose something else." msgstr "Se il server è il primo computer della rete, si raccomanda di lasciare il valore di default, a meno che non ci sia una ragione particolare per cambiarlo." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:339 msgid "If your server is being installed into an existing network, you must choose an address which is not in use by any other computer on this network." msgstr "Se il server è stato installato all'interno di una rete esistente, si scelga un indirizzo non utilizzato dagli altri computer della rete." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:361 msgid "Invalid local IP address" msgstr "Indirizzo IP locale non valido" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:374 msgid "Select local subnet mask" msgstr "Subnet mask locale" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:376 msgid "Please enter the local subnet mask for this server." msgstr "Inserire la subnet mask locale per il server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:378 msgid "If this server is the first machine on your network, we recommend using the default unless you have a specific reason to choose something else." msgstr "Se il server è il primo computer della rete, si raccomanda di usare il valore di default, a meno che non ci sia una ragione particolare per cambiarlo." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:380 msgid "If your server is being installed into an existing network, you must choose the same subnet mask used by other computers on this network." msgstr "Se il server è stato installato all'interno di una rete esistente, si scelga la stessa subnet mask usata dagli altri computer della rete." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:403 msgid "Invalid local subnet mask" msgstr "Subnet mask locale non valida" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:420 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:435 msgid "Server and gateway" msgstr "Server e gateway" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:425 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:436 msgid "Private server and gateway" msgstr "Server e gateway privato" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:430 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:437 msgid "Server-only" msgstr "Solo Server" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:442 msgid "Select operation mode" msgstr "Selezionare la modalità di funzionamento" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:445 msgid "If you want this server to act as a gateway to the Internet, choose one of the server and gateway options. Server and gateway mode acts as a firewall and provides an external web and mail server. Private server and gateway mode also acts as a firewall but disables all incoming services." msgstr "Se si desidera che il server svolga le funzionalità di un gateway, si scelga l'opzione Server e gateway. La modalità Server e gateway attiva le funzionalità di firewall e fornisce un server web e un server di posta accessibili dall'esterno. La modalità Server e gateway privato attiva le funzionalità di firewall, ma disabilita tutti i servizi accessibili dall'esterno." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:447 msgid "Server-only mode provides services to a local, protected network. If you choose this mode and Internet access is required, the network must be protected by another server configured in server and gateway mode (or another firewall)." msgstr "La modalità Solo server fornisce servizi alla rete protetta locale. Se si è scelta questa modalità ed è necessario l'accesso ad Internet, la rete dovrebbe essere protetta da un altro server configurato in modalità Server e gateway (o da un altro firewall)." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:493 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:503 msgid "Server and gateway - dedicated" msgstr "Server e gateway - dedicato" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:498 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:504 msgid "Server and gateway - dialup" msgstr "Server e gateway - dialup" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:509 msgid "Select external access mode" msgstr "Selezionare la modalità d'accesso esterna" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:512 msgid "The next step is to select the access mode that your server will use to connect to the Internet." msgstr "Selezionare la modalità d'accesso che il server utilizzerà per connettersi ad Internet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:514 msgid "Choose the dedicated option if you access the Internet via a router, a cable modem or ADSL. Choose the dialup option if you use a modem or ISDN connection." msgstr "Scegliere l'opzione dedicato se si accede ad Internet attraverso un router ADSL. Scegliere l'opzione dialup se si usa una connessione modem o ISDN." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:542 msgid "Only one network adapter" msgstr "Solo un adattatore di rete" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:544 msgid "Your system only has a single network adapter. It cannot be used in this configuration." msgstr "Il sistema ha un solo adattatore di rete. Non è possibile usare questa configurazione." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:582 msgid "use DHCP (send account name as client identifier)" msgstr "usa DHCP (nome account come identificatore del client)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:583 msgid "DHCP with account name" msgstr "DHCP con nome account" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:589 msgid "use DHCP (send ethernet address as client identifier)" msgstr "usa DHCP (indirizzo ethernet come identificatore del client)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:590 msgid "DHCP with ethernet address" msgstr "DHCP con indirizzo Ethernet" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:596 msgid "use PPP over Ethernet (PPPoE)" msgstr "usa PPP over Ethernet (PPPoE)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:597 msgid "PPPoE" msgstr "PPPoE" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:603 msgid "use static IP address (do not use DHCP or PPPoE)" msgstr "usa indirizzo IP statico (non usare DHCP o PPPoE)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:604 msgid "static IP" msgstr "IP statico" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:609 msgid "Use DHCP (send account name as client identifier)" msgstr "Usa DHCP (nome account come identificatore del client)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:610 msgid "Use DHCP (send ethernet address as client identifier)" msgstr "Usa DHCP (indirizzo ethernet come identificatore del client)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:611 msgid "Use PPP over Ethernet (PPPoE)" msgstr "Usa PPP over Ethernet (PPPoE)" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:612 msgid "Use static IP address" msgstr "Usa indirizzo IP statico" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:617 msgid "External Interface Configuration" msgstr "Configurazione interfaccia esterna" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:620 msgid "Next, specify how to configure the external ethernet adapter." msgstr "In seguito, specificare come configurare l'adattatore ethernet esterno." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:622 msgid "For cable modem connections, select DHCP. If your ISP has assigned a system name for your connection, use the account name option. Otherwise use the ethernet address option. For residential ADSL, use PPPoE. For most corporate connections, use a static IP address." msgstr "Per la configurazione, selezionare DHCP. Se l'ISP ha assegnato un nome alla connessione, utilizzare l'opzione nome account. Altrimenti utilizzare l'opzione indirizzo ethernet. Per una connessione ADSL residenziale, utilizzare PPPoE. Per la maggior parte delle connessioni aziendali, utilizzare l'indirizzo IP statico." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:675 msgid "Enter ISP assigned hostname" msgstr "Inserire l'hostname assegnato dall'ISP" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:677 msgid "You have selected DHCP (send account name). Please enter the account name assigned by your ISP. You must enter the account name exactly as specified by your ISP." msgstr "E' stato selezionato DHCP (inviare il nome account). Inserire il nome account esattamente come specificato dall'ISP." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:694 msgid "Select PPPoE user account" msgstr "Selezionare l'account utente PPPoE" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:696 msgid "Please enter the user account name for your PPPoE Internet connection. Most PPPoE service providers use an account name and e-mail domain. For example, " msgstr "Inserire il nome dell'account utente per la connessione Internet PPPoE. Molti provider PPPoE usano un nome account e un dominio e-mail. Per esempio, " #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:714 msgid "Select PPPoE password" msgstr "Selezionare la password PPPoE" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:716 msgid "Please enter the password for your PPPoE Internet connection." msgstr "Inserire la password per la connessione Internet PPPoE." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:739 msgid "Select static IP address" msgstr "Selezionare l'indirizzo IP statico" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:741 msgid "You have chosen to configure your external Ethernet connection with a static IP address. Please enter the IP address which should be used for the external interface on this server." msgstr "Si è scelto di configurare una connessione Ethernet esterna con un indirizzo IP statico. Inserire l'indirizzo IP che dovrebbe essere usato per l'interfaccia esterna sul server." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:743 msgid "Please note, this is not the address of your external gateway." msgstr "Attenzione, questo non è l'indirizzo del vostro gateway esterno." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:764 msgid "Invalid external IP address" msgstr "Indirizzo IP esterno non valido" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:778 msgid "Select subnet mask" msgstr "Selezionare la subnet mask" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:780 msgid "Please enter the subnet mask for your Internet connection. A typical subnet mask is 255.255.255.0." msgstr "Inserire la subnet mask per la connessione Internet. Una tipica subnet mask è 255.255.255.0." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:805 msgid "Invalid address ranges" msgstr "Range indirizzi IP non validi" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:807 msgid "" "Internal address range overlaps external address range\n" "\n" "Local interface: %s/%s\n" "External interface: %s/%s\n" "\n" "Please review your settings." msgstr "" "Intervallo di IP interni sovrapposto al quelli esterni\n" "\n" "Interfaccia locale: %s/%s\n" "Interfaccia esterna: %s/%s\n" "\n" "Ricontrolla le impostazioni." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:833 msgid "Invalid external subnet mask" msgstr "Subnet mask esterna non valida" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:856 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1471 msgid "Select gateway IP address" msgstr "Selezionare l'indirizzo IP del gateway" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:858 msgid "Please enter the gateway IP address for your Internet connection." msgstr "Inserire l'indirizzo IP del gateway per la connessione Internet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:883 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1507 msgid "Invalid" msgstr "Non valido" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:899 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:900 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:901 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:902 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:903 msgid "Set modem port to" msgstr "Selezionare la porta del modem" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:903 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:937 msgid "ISDN" msgstr "ISDN" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:904 msgid "internal ISDN card" msgstr "scheda ISDN interna" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:909 msgid "Select modem/ISDN port" msgstr "Selezionare la porta modem/ISDN" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:912 msgid "Please specify which serial port your modem or ISDN terminal adapter is connected to. Select ISDN if you wish to use an internal ISDN card." msgstr "Specificare a quale porta seriale è collegato il modem. Selezionare ISDN se si desidera usare una scheda ISDN interna." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1090 msgid "ISDN card detected" msgstr "Scheda ISDN rilevata" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1092 msgid "Do you wish to use the following ISDN card for your Internet connection?" msgstr "Si desidera usare la seguente scheda ISDN per la connessione ad Internet?" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1108 msgid "ISDN driver options" msgstr "Opzioni del driver ISDN" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1110 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1174 msgid "You have selected an internal ISDN card." msgstr "E' stata selezionata una scheda ISDN interna." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1112 msgid "The ISDN software will need to be told what ISDN hardware you have. It may also need to be told what protocol number to use and may need to be given some additional information about your hardware such as the I/O address and interrupt settings." msgstr "E' necessario specificare il tipo di hardware ISDN. Potrebbe anche essere necessario indicare il numero di protocollo da utilizzare, oltre ad alcune informazioni addizionali quali indirizzo I/O e interrupt." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1114 msgid "This information is provided via an options string. An example is" msgstr "Questa informazione è fornita attraverso una stringa d'opzioni. Per esempio è" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1116 msgid "which would be used to set the" msgstr "che dovrebbero essere usate per impostare le" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1118 msgid "to EURO-ISDN." msgstr "da EURO-ISDN." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1144 msgid "Multiple Subscriber Numbering" msgstr "Multiple Subscriber Numbering" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1146 msgid "Your ISDN line may have more than one number associated with it known as Multiple Subscriber Numbering (MSN). In order to receive an incoming ISDN call from an ISP or a remote site, you may need to configure your ISDN card with its MSN so that ISDN calls are routed correctly. If you do not know this number, you can leave this value blank." msgstr "La linea ISDN potrebbe avere associato più di un numero che è conosciuto come Multiple Subscriber Numbering (MSN). Per ricevere una chiamata ISDN i iniziata da un ISP o da un sito remoto si deve necessariamente configurare la scheda ISDN con gli MSN così che le chiamate ISDN sono instradate correttamente. Lasciare i campi vuoti se non si conoscono questi numeri." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1156 msgid "Invalid Multiple Subscriber Numbering (MSN)" msgstr "Multiple Subscriber Numbering (MSN) non valido" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1176 msgid "The driver for this card includes modem emulation software, and modem control commands are used by the networking software to configure and control the ISDN interface card." msgstr "Il driver della scheda include un software d'emulazione del modem, i comandi di controllo sono utilizzati dal software di rete per configurare e controllare la scheda ISDN." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1178 msgid "The precise behavior of your ISDN card can be modified by using a specific modem initialization string, to adjust the settings of the card, or to modify its default behavior. Most cards should work correctly with the default settings, but you may enter a modem initialization string here if required." msgstr "Il comportamento della scheda ISDN può essere modificato usando una stringa d'inizializzazione del modem specifica, questa può aggiustare i parametri della scheda o modificare il comportamento di default. La maggior parte delle schede dovrebbero lavorare correttamente con i parametri di default, ma se necessario, inserire qui una stringa d'inizializzazione del modem." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1181 msgid "You have selected a modem device." msgstr "E' stato selezionato un modem." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1183 msgid "The precise behavior of your modem can be modified by using a specific modem initialization string, to adjust the settings of your modem, or to modify its default behavior. You may enter a modem initialization string here." msgstr "Il comportamento del modem può essere modificato usando una stringa d'inizializzazione del modem specifica, questa può aggiustare i parametri della scheda o modificare il comportamento di default. Se necessario, inserire qui una stringa d'inizializzazione del modem." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1185 msgid "Many modems will work correctly without any special settings. If you leave this field blank, the default string of" msgstr "Molti modem funzionano correttamente senza nessuna configurazione speciale. Se si lascia il campo vuoto, la stringa di default" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1187 msgid "will be used. This turns the modem speaker off, so that you will not be bothered by the noises that a modem makes when it starts a connection." msgstr "sarà usata. Questa disattiva l'altoparlante del modem, così che non si sarà più infastiditi dal rumore che il modem produce quando inizia una connessione." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1193 msgid "Modem initialization string" msgstr "Stringa d'inizializzazione del modem" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1226 msgid "Select access phone number" msgstr "Selezionare il numero di telefono" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1229 msgid "Please enter the access phone number for your Internet connection. Long distance numbers can be entered. The phone number must not contain spaces, but may contain dashes for readability. Commas may be inserted where a delay is required. For example, if you need to dial 9 first, then wait, then dial a phone number, you could enter" msgstr "Inserire il numero di telefono per la connessione ad Internet. Il numero non deve contenere spazi. Inserire una virgola dove è richiesta una pausa. Per esempio, se è necessario comporre prima il 9 e poi attendere prima di comporre il numero di telefono inserire" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1256 msgid "Invalid access phone number" msgstr "Numero di telefono non valido" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1268 msgid "Please enter the user account name for your Internet connection." msgstr "Inserire il nome dell'account dell'utente per la connessione Internet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1270 msgid "Please note that account names are usually case sensitive." msgstr "Attenzione a maiuscole e minuscole nei nomi account." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1274 msgid "Select dialup user account" msgstr "Selezionare l'account utente di dialup" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1290 msgid "Please enter the password for your Internet connection." msgstr "Inserire la password per la connessione Internet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1292 msgid "Please note that passwords are usually case sensitive." msgstr "Attenzione a maiuscole e minuscole nella password." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1296 msgid "Select dialup password" msgstr "Selezionare la password di dialup" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1338 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1362 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1384 msgid "Select connect policy" msgstr "Selezionare la politica di connessione" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1341 msgid "Select the dialup connect policy that you would like to use during office hours (8:00 AM to 6:00 PM) on weekdays." msgstr "Selezionare la politica di connessione da utilizzare durante le ore d'ufficio (dalle 8:00 alle 18:00) nei giorni lavorativi." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1365 msgid "Please select the dialup connect policy that you would like to use outside office hours (6:00 PM to 8:00 AM) on weekdays." msgstr "Selezionare la politica di connessione da utilizzare fuori dalle ore d'ufficio (dalle 18:00 alle 8:00) nei giorni lavorativi." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1387 msgid "Please select the dialup connect policy that you would like to use during the weekend." msgstr "Selezionare la politica di connessione da utilizzare durante il fine settimana." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1414 msgid "Enable NIC bonding" msgstr "abilita NIC bonding" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1414 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1428 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1430 msgid "enabled" msgstr "abilitato" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1415 msgid "Disable NIC bonding" msgstr "disabilita NIC bonding" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1415 msgid "disabled" msgstr "disabilitato" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1420 msgid "NIC Bonding" msgstr "NIC bonding" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1423 msgid "You have more than one network adapter. Would you like to bond them together into a single interface? This can provide greater throughput and/or failure resiliency, depending on your adapters and network configuration." msgstr "Hai più di una scheda di rete. Vuoi collegarle insieme come un unica interfaccia? Questo può consentire una maggiore banda passante e/o una maggiore ridondanza, a seconda delle tue schede di rete e della configurazione della rete." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1441 msgid "" "The NIC bonding driver allows various modes and performance options. Edit the option string below if the defaults are not suitable.\n" "\n" "Most users do not need to change this setting.\n" msgstr "" "Il driver del NIC Bonding consente varie modalità e opzioni prestazionali. Modifica la seguente stringa delle opzioni se le impostazioni di default non sono adeguate.\n" "\n" "La maggior parte degli utenti non ha necessità di cambiare queste impostazioni.\n" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1445 msgid "NIC Bonding Options" msgstr "Opzioni di NIC Bonding" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1473 msgid "In server-only mode, this server will use only one ethernet adapter connected to your local network. If you have a firewall and wish to use this server as your e-mail/web server, you should consult the firewall documentation for networking details." msgstr "Nella modalità server-only, il server utilizzerà solo un adattatore ethernet connesso alla rete locale. Se si ha un firewall e si vuole usare il server come un server Web o un server di posta, consultare la documentazione del firewall per i dettagli." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1475 msgid "Please specify the gateway IP address that this server should use to access the Internet. Leave blank if you have no Internet access." msgstr "Indicare l'indirizzo IP del gateway che il server dovrebbe usare per accedere ad Internet. Lasciare il campo vuoto, se non si ha un accesso ad Internet." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1550 msgid "Can't open output file" msgstr "Impossibile aprire il file di output" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1571 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1576 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1597 msgid "Off" msgstr "Disabilitato" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1571 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1575 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1592 msgid "On" msgstr "Abilitato" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1575 msgid "Provide DHCP service to local network" msgstr "Fornisce il servizio DHCP per la rete locale" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1576 msgid "Do not provide DHCP service to local network" msgstr "Non fornisce il servizio DHCP per la rete locale" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1581 msgid "Select DHCP server configuration" msgstr "Selezionare la configurazione del server DHCP" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1584 msgid "Please specify whether you would like this server to provide DHCP service to your local network. This will let you assign IP addresses to your other network computers automatically by configuring them to obtain their IP information using DHCP." msgstr "Specificare se si vuole che il server fornisca il servizio DHCP per la rete locale. Sarà possibile assegnare indirizzi IP ai computer della rete in maniera automatica, configurandoli per ottenere le informazioni sull'indirizzo IP utilizzando il DHCP." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1586 msgid "We strongly advise that all clients are configured using DHCP." msgstr "Si raccomanda di usare DHCP per configurare tutti i clients." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1620 msgid "Select beginning of DHCP host number range" msgstr "Selezionare l'inizio dell'intervallo degli indirizzi host DHCP" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1622 msgid "You must reserve a range of host numbers for the DHCP server to use." msgstr "Riservare un intervallo di indirizzi IP utilizzati dal server DHCP." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1624 msgid "Please enter the first host number in this range. If you are using the standard server defaults and have no particular preference, you should keep the default values." msgstr "Inserire l'indirizzo IP iniziale. Se si stanno usando i valori di default e non si hanno particolari preferenze, mantenere i valori proposti." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1646 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1742 msgid "That address is not on the local network." msgstr "Questo indirizzo non fa parte del network locale." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1651 #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1747 msgid "Invalid IP address for DHCP start" msgstr "Indirizzo IP di partenza del DHCP non valido" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1657 msgid "You must provide an IP address for the start of the DHCP range." msgstr "Inserire un indirizzo IP per l'inizio dell'intervallo DHCP." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1683 msgid "Select end of DHCP host number range" msgstr "Selezionare la fine dell'intervallo DHCP" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1685 msgid "Please enter the last host address in this range. If you are using the standard server defaults and have no particular preference, you should keep the default value. Think to add enough ip for vpn sessions." msgstr "Inserire l'ultimo indirizzo IP in questo range. Se si stanno usando i valori di default e non si hanno particolari preferenze, mantenere i valori proposti. Aggiungere un numero di indirizzi ip sufficienti per le sessioni vpn." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1725 msgid "There is not enough IP in the range to include all your vpn sessions" msgstr "Non ci sono indirizzi ip sufficienti per le sessioni VPN." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1730 msgid "The IP range cannot include our private network address." msgstr "L'intervallo IP non può contenere gli indirizzi di rete privati." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1736 msgid "The end of the range must be larger than the start." msgstr "L'indirizzo finale deve essere maggiore dell'indirizzo iniziali." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1753 msgid "You must provide an IP address for the end of the DHCP range." msgstr "Inserire un indirizzo IP per la fine dell'intervallo DHCP." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1773 msgid "Corporate DNS server address" msgstr "Indirizzo server DNS aziendale" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1775 msgid "If this server does not have access to the Internet, or you have special requirements for DNS resolution, enter the DNS server IP address here." msgstr "Se il server non ha accesso ad Internet o la risoluzione dei nomi è affidata ad altri server, inserire l'indirizzo IP del server DNS nel campo sottostante." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1777 msgid "This field should be left blank unless you have a specific reason to configure another DNS server." msgstr "Si consiglia di lasciare il campo vuoto se non si ha la necessita di configurare un altro server DNS." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1779 msgid "You should not enter the address of your ISP's DNS servers here, as the server is capable of resolving all Internet DNS names without this additional configuration." msgstr "Non inserire l'indirizzo del DNS del provider perché il server è in grado di risolvere direttamente tutti i nomi di dominio Internet senza necessità di ulteriori configurazioni." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1809 msgid "Invalid IP address for DNS forwarder" msgstr "Indirizzo IP non valido per il DNS" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1825 msgid "No unsaved changes" msgstr "Nessuna modifica non salvata" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1827 msgid "No changes were made during the configuration process" msgstr "Nessuna modifica è stata fatta durante la procedura di configurazione" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1829 msgid "Press ENTER to proceed." msgstr "Premere Invio per continuare." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1830 msgid "Finish" msgstr "Fine" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1843 msgid "Changes will take effect after reboot" msgstr "Le modifiche saranno attive dopo il riavvio" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1845 msgid "The new configuration will take effect when you reboot the server." msgstr "La nuova configurazione diventerà attiva dopo il riavvio del sistema." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1847 msgid "Do you wish to reboot right now?" msgstr "Si desidera riavviare ora?" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1865 msgid "Activate configuration changes" msgstr "Attivare le modifiche alla configurazione" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1867 msgid "Your configuration changes will now be activated. The configuration files on this server will be changed to reflect your new settings. This may take a few minutes." msgstr "Le modifiche alla configurazione saranno attivate ora. I file di configurazione saranno modificati con i nuovi parametri. Questo potrebbe richiedere alcuni minuti." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1869 msgid "Do you wish to activate your changes?" msgstr "Si desidera attivare i cambiamenti apportati?" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1884 #: root/usr/share/perl5/vendor_perl/esmith/console/save_config.pm:27 msgid "Activating configuration settings" msgstr "Attivazione dei parametri di configurazione" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1885 #: root/usr/share/perl5/vendor_perl/esmith/console/save_config.pm:28 msgid "Please stand by while your configuration settings are activated ..." msgstr "Attendere mentre i parametri di configurazione vengono attivati ..." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1916 #: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:34 msgid "*** THERE ARE UNACTIVATED CHANGES - QUIT ANYWAY? ***" msgstr "*** CI SONO MODIFICHE NON ATTIVE - USCIRE COMUNQUE? ***" #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1919 #: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:37 msgid "Your configuration changes have been saved but have not yet been activated. This may result in unpredictable system behavior. We recommend that you complete the configuration process and activate the changes before exiting the console." msgstr "Le modifiche alla configurazione sono state salvate ma non sono ancora state attivate. Questo può rendere le funzionalità del sistema imprevedibili. Si raccomanda di completare il processo di configurazione e attivare i cambiamenti prima di uscire dalla console." #: root/usr/share/perl5/vendor_perl/esmith/console/configure.pm:1921 #: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:39 msgid "Are you sure you want to quit with unactivated changes?" msgstr "Siete sicuri di voler uscire con i cambiamenti non attivi?" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:25 msgid "Perform backup to removable media" msgstr "Crea backup su disco rimovibile." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:85 msgid "Could not create backup file on device" msgstr "Non posso creare il file di backup sulla periferica" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:150 msgid "Backup failed. Look at the log files for more details." msgstr "Backup fallito. Controllare i log per maggiori dettagli." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:150 msgid "Backup successfully created." msgstr "Backup eseguito con successo." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:171 msgid "Create Backup to removable media" msgstr "Crea backup su disco rimovibile" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:173 msgid "Do you wish to create a backup on removable media?" msgstr "Vuoi effettuare il backup su un supporto rimovibile ?" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:174 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:173 msgid "Insert removable media before proceeding." msgstr "Inserisci il supporto rimovibile, poi premi il tasto invio." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:175 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:174 msgid "It may take many seconds to scan for media." msgstr "L'analisi dei media potrebbe richiedere qualche secondo." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:191 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:202 msgid "These filesystems are not valid:" msgstr "Questi filesystem non sono validi:" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:194 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:205 msgid "Reason" msgstr "Ragione" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:200 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:209 msgid "No valid backup device found" msgstr "Nessun device di backup trovato" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:200 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:220 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:228 msgid "size" msgstr "dimensione" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:206 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:215 msgid "Try again" msgstr "Riprova" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:219 msgid "The following are valid for backup" msgstr "I seguenti sono validi per il backup:" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:228 msgid "Choose device to use for backup" msgstr "Scegli la periferica da usare per il backup" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:242 msgid "Some parts are excluded of your backup" msgstr "Alcuni elementi del tuo backup sono esclusi " #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:251 msgid "Preparing for backup" msgstr "Preparazione per il backup" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:252 msgid "Please stand by while the system is prepared for backup..." msgstr "Attendi, il sistema sta preparando il backup..." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:257 msgid "Creating backup file" msgstr "Creazione file di backup" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:265 msgid "Backup complete" msgstr "Backup completato" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:266 msgid "Remove backup media." msgstr "Rimuovere il supporto di backup." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:21 msgid "Restore from removable media" msgstr "Ripristina da disco rimovibile." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:137 msgid "Restore failed. Your system is likely in an inconsistent state - look at the log files for more details." msgstr "Ripristino fallito. Il sistema è probabilmente in stato inaffidabile - Controllare il file di log per maggiori dettagli." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:140 msgid "Restore successful." msgstr "Ripristino avvenuto con successo." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:170 msgid "Restore From Backup" msgstr "Ripristina da backup" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:172 msgid "Do you wish to restore from backup?" msgstr "Vuoi effettuare il ripristino da backup?" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:189 msgid "These filesystems could hold backups" msgstr "Questi filesystem non possono contenere il backup" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:234 msgid "Date" msgstr "Data" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:235 msgid "Size" msgstr "Dimensione" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:239 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:264 msgid "Start restore from backup" msgstr "Inzio della procedura di ripristino dal backup" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:241 msgid "Backup found on device" msgstr "Rilevato un backup sul device:" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:243 msgid "Backup details" msgstr "Dettagli del backup:" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:245 msgid "Do you wish to restore from this file?" msgstr "Vuoi effettuare il ripristino da questo file?" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:252 msgid "Backups found on these devices" msgstr "Backup rilevati su questi supporti" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:267 msgid "Please select the backup that you wish to restore from." msgstr "Seleziona il backup che vuoi ripristinare." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:283 msgid "Preparing for restore" msgstr "Preparazione per il ripristino" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:284 msgid "Please stand by while the system is prepared for restore..." msgstr "Attendi, il sistema sta preparando il ripristino..." #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:293 msgid "Restoring from backup" msgstr "Ripristina da backup" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:309 msgid "Restore Complete" msgstr "Ripristino completato" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:310 msgid "You must restart your system to finish the restore." msgstr "Il sistema va riavviato per completare il ripristino" #: root/usr/share/perl5/vendor_perl/esmith/console/perform_restore.pm:311 msgid "Do you want to restart now?" msgstr "Si desidera riavviare ora?" #: root/usr/share/perl5/vendor_perl/esmith/console/quitConsole.pm:10 msgid "Exit from the server console" msgstr "Esci dalla console del server" #: root/usr/share/perl5/vendor_perl/esmith/console/startup.pm:112 msgid "Starting system services" msgstr "Servizi di sistema in corso di avvio" #: root/usr/share/perl5/vendor_perl/esmith/console/startup.pm:114 msgid "Please standby while system services are started ..." msgstr "Attendi,mentre i servizi vengono avviati ..." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:30 #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:109 msgid "Choose administrator password" msgstr "Inserire la password dell'amministratore" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:34 msgid "You will now be taken through a sequence of screens to perform basic networking configuration on this server." msgstr "Seguire le istruzioni che appariranno in sequenza sullo schermo per effettuare la configurazione di base della rete su questo server." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:36 msgid "You can make your selections in each screen using the Arrow and Tab keys. At any point, if you select Back you will be returned to the previous screen." msgstr "E' possibile utilizzare il tasto Tab e i tasti cursore in ogni schermata. Se si seleziona Indietro, in qualsiasi momento, si ritorna alla schermata precedente." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:38 msgid "Before you start, you must first choose the administrator password for your system and enter it below. You will not see the password as you enter it." msgstr "Prima di iniziare, scegliere la password dell'amministratore di sistema e inserirla nel campo sottostante. La password non verrà visualizzata mentre viene digitata." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:45 #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:117 msgid "Administrator password not set" msgstr "La password dell'amministratore non è stata inserita" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:46 #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:118 msgid "Sorry, you must set the administrator password now." msgstr "Inserire ora la password dell'amministratore." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:56 msgid "Unprintable characters in password" msgstr "Caratteri non validi nella password" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:57 msgid "The password must contain only printable characters." msgstr "La password deve contenere solo caratteri stampabili." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:70 msgid "it is based on your username" msgstr "è basata sull'username" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:71 msgid "it is based upon your password entry" msgstr "è basata sulla password utilizzata per accedere" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:72 msgid "it is derived from your password entry" msgstr "è derivata dalla password utilizzata per accedere" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:73 msgid "it is derivable from your password entry" msgstr "è derivabile dalla password utilizzata per accedere" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:74 msgid "it is too short" msgstr "è troppo corta" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:75 msgid "it is all whitespace" msgstr "contiene solo spazi bianchi" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:76 msgid "it is too simplistic/systematic" msgstr "è troppo semplice" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:77 msgid "it is based on a dictionary word" msgstr "è basata su una parola del dizionario" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:78 msgid "it is based on a (reversed) dictionary word" msgstr "è basata su una parola del dizionario (invertita)" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:79 msgid "it does not contain numbers" msgstr "non contiene numeri" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:80 msgid "it does not contain uppercase characters" msgstr "non contiene lettere maiuscole" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:81 msgid "it does not contain lowercase characters" msgstr "non contiene lettere minuscole" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:82 msgid "it does not contain special characters" msgstr "non contiene caratteri speciali" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:91 msgid "Software error: password check failed" msgstr "Errore software: fallita la verifica della password" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:96 msgid "Bad Password Choice" msgstr "Cattiva scelta della password" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:98 msgid "The password you have chosen is not a good choice, because " msgstr "La password inserita non è una buona scelta, perché " #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:101 msgid "Do you wish to choose a better one?" msgstr "Si desidera cambiarla con una migliore?" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:110 msgid "Please type your administrator password again to verify." msgstr "Inserire nuovamente la password amministratore per verifica." #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:128 msgid "Passwords do not match" msgstr "Le password non coincidono" #: root/usr/share/perl5/vendor_perl/esmith/console/system_password.pm:129 msgid "The two passwords did not match" msgstr "Le due password non coincidevano" #~ msgid "The server has detected these ethernet adapters:" #~ msgstr "Il server ha trovato i seguenti adattatori ethernet:" #~ msgid "You now need to select the proper driver for your %s network ethernet adapter. The server can attempt to do this automatically, or you can do it manually - either by specifying the model of your ethernet adapter or by directly choosing a driver." #~ msgstr "Selezionare il driver corretto per l'adattatore ethernet di rete %s. Il server tenterà di rilevarlo automaticamente, ma è possibile selezionarlo manualmente specificando il modello dell'adattatore ethernet o scegliendo direttamente un driver." #~ msgid "Please select which device should be used for the backup file." #~ msgstr "Seleziona la periferica che vuoi usare per i file di backup." #~ msgid "Please select whether you want to operate in normal or swapped mode." #~ msgstr "Selezionare la modalità di funzionamento: normale o invertita." #~ msgid "You have two Ethernet cards which use the same driver. The server will automatically designate one for your local network (called eth0) and one for your external Internet connection (called eth1). If this default assignment is not appropriate for your situation, you can select the opposite assignment using swapped mode. Most installations can accept the default setting of normal." #~ msgstr "Due schede ethernet usano lo stesso driver. Il server automaticamente utilizzerà una delle due per la rete locale (eth0) e l'altra per la connessione Internet esterna (eth1). Se l'assegnamento automatico non è appropriato, è possibile utilizzare la modalità invertita. Nella maggior parte dei casi accettare la configurazione di default (normale)." #~ msgid "Select ethernet card assignment" #~ msgstr "Selezionare l'assegnazione della scheda ethernet" #~ msgid "swapped" #~ msgstr "invertita" #~ msgid "eth1 is local, eth0 is external" #~ msgstr "eth1 è locale, eth0 è esterna" #~ msgid "normal" #~ msgstr "normale" #~ msgid "eth0 is local, eth1 is external" #~ msgstr "eth0 è locale, eth1 è esterna" #~ msgid "Please specify the driver to use for the %s ethernet adapter" #~ msgstr "Indicare il driver da usare per l'adattatore ethernet %s" #~ msgid "Specify %s ethernet driver" #~ msgstr "Specificare il driver ethernet %s" #~ msgid "Please specify your %s ethernet adapter and corresponding driver" #~ msgstr "Specificare l'adattatore ethernet %s e il driver corrispondente" #~ msgid "Specify %s adapter and driver" #~ msgstr "Specificare il driver e l'adattatore %s" #~ msgid "Please select one of the following:" #~ msgstr "Selezionare uno dei seguenti:" #~ msgid "Select %s adapter manually" #~ msgstr "Selezionare l'adattatore %s manualmente" #~ msgid "Choose driver directly" #~ msgstr "Scegliere il driver direttamente" #~ msgid "Choose driver by specifying ethernet adapter model" #~ msgstr "Scegliere il driver specifico del modello dell'adatattore ethernet" #~ msgid "unknown" #~ msgstr "sconosciuto" #~ msgid "Manually select driver for %s ethernet adapter" #~ msgstr "Selezionare manualmente il driver per l'adattatore ethernet %s" #~ msgid "internal" #~ msgstr "interno" #~ msgid "for chipset" #~ msgstr "per chipset" #~ msgid "Success" #~ msgstr "Successo" #~ msgid "You can scroll through this document using the up and down arrow keys or the Page Up and Page Down keys." #~ msgstr "E' possibile spostarsi all'interno del documento con i tasti cursore o i tasti Pag su e Pag giù." #~ msgid "Mitel Networks Corporation support and licensing information" #~ msgstr "Informazioni di supporto tecnico e di licenza su Mitel Networks Corporation" #~ msgid "bytes" #~ msgstr "bytes" #~ msgid "Backup file found:" #~ msgstr "File di backup trovato:" #~ msgid "Backup file not found" #~ msgstr "File di backup non trovato" #~ msgid "Choose device to restore from" #~ msgstr "Seleziona la periferica di restore" #~ msgid "No removable media or device found" #~ msgstr "Nessuna periferica removibile è stato trovata" #~ msgid "Backup medium not found" #~ msgstr "Il supporto per il backup non è stato trovato" #~ msgid "Insert removable media containing your backup file, then hit the enter key." #~ msgstr "Inserisci il supporto rimovibile contenente i tuoi file di backup, premi poi il tasto invio" #~ msgid "Insert media containing backup" #~ msgstr "Inserisci il supporto contenente il backup" #~ msgid "Remove removable media, then hit the enter key." #~ msgstr "Estrai il supporto rimovibile, premi poi il testo invio." #~ msgid "No removable and/or writable media or device found" #~ msgstr "Nessuna periferica removibile è stata trovata" #~ msgid "Writable backup medium not found" #~ msgstr "Il supporto per il backup non è stato trovato" #~ msgid "Insert media to use for backup" #~ msgstr "Inserisci il supporto da utilizzare per il backup" #~ msgid "This configuration is not yet fully supported in these screens." #~ msgstr "Questa configurazione non è ancora gestibile da console." #~ msgid "The free and used disk count must equal one." #~ msgstr "Il numero di dischi vuoti ed usati deve essere 1." #~ msgid "Please enter the password for your dynamic DNS service" #~ msgstr "Inserire la password per il servizio di DNS dinamico." #~ msgid "Select dynamic DNS password" #~ msgstr "Selezionare la password del DNS dinamico" #~ msgid "Please enter the account name for your dynamic DNS service" #~ msgstr "Inserire l'account per il servizio di DNS dinamico" #~ msgid "Select dynamic DNS account" #~ msgstr "Selezionare l'account del DNS dinamico" #~ msgid "Choose which dynamic DNS service you would like to use." #~ msgstr "Scegliere il servizio di DNS dinamico che si desidera usare." #~ msgid "Please specify whether you wish to subscribe to a dynamic DNS service. Such services allow you to have a domain name without a static IP address, and are available from various organizations for free or for a reasonable charge. A notification must be sent to the dynamic DNS service whenever your IP address changes. Your server can automatically do this for some dynamic DNS services." #~ msgstr "Specificare se si desidera utilizzare un servizio di DNS dinamico. Questi servizi permettono di avere un nome di dominio senza un indirizzo IP statico. Tali servizi vengono forniti da diverse organizzazioni liberamente o ad un prezzo ragionevole. Ogni volta che l'indirizzo IP cambia deve essere spedita una notifica al servizio DNS dinamico. Per alcuni servizi di DNS dinamico il server può automaticamente effettuare la notifica." #~ msgid "Select dynamic DNS service" #~ msgstr "Selezionare un servizio di DNS dinamico" #~ msgid "custom DynDNS service" #~ msgstr "Selezionare un servizio di DNS dinamico" #~ msgid "commercial service" #~ msgstr "servizio commerciale" #~ msgid "free service" #~ msgstr "servizio gratuito" #~ msgid "Do not use a dynamic DNS service" #~ msgstr "Non usare un server di DNS dinamico" #~ msgid "Cannot read directory" #~ msgstr "Impossibile leggere la directory"