diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Backup/backup_en.lex b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Backup/backup_en.lex new file mode 100644 index 0000000..0f4d3de --- /dev/null +++ b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Backup/backup_en.lex @@ -0,0 +1,284 @@ +'bac_No suitable local devices found' => 'No suitable local devices found', +'bac_BACKUP_TITLE' => 'Backup or restore server data', +'bac_BACKUP_DESC' => '

The server provides two ways to back up and restore +your server: using your local desktop or a tape drive.

+

The first method creates a copy of your server configuration and user +data files, and downloads it to your local desktop via your web browser. +Currently your configuration and data files total approximately +[_1]. The backup file will be somewhat less than this, +depending on how compressible the data are. The \"Verify desktop backup +file\" option can be used to check the integrity of a desktop backup +file.

+

The tape backup method uses a software package called [_2] +to back up your entire hard disk to tape every night. This requires a +supported tape drive and a tape that is not write-protected. The backup +is performed automatically at the selected time every night (with a +reminder automatically e-mailed to the administrator during the day). +Currently your hard disk contains [_3] of data.

+

Both restore methods allow you to restore your configuration and user +data files. Ideally, the restore should be performed on a freshly +installed server.

', +'bac_BACKUP_DESC_DAR' => '

Three ways are provided to back up and restore your +server: using a tape drive, using a network share or a local +removable disk, or using your local desktop.

+

Tape Backup. This method uses a software package called [_1] +to back up your entire hard disk to tape every night. This requires a +supported tape drive and a tape that is not write-protected. The backup +is performed automatically at the selected time every night (with a +reminder automatically e-mailed to the administrator during the day). +Currently your hard disk contains [_2] of data.

+

Workstation backup. This method uses a software package called dar +to back up your server configuration and data files to a network share +or a local removable disk such as a USB disk. +You can manage how many rotating sets of backups are kept, +and how many incremental backups to have in each set. +The backup is performed automatically at the selected time every day. Currently +configuration and data files total approximately [_3] uncompressed. +Twice the compressed data size must be available on the backup share.

+

Backup to Desktop. This method creates a copy of your server +configuration and user data files, and downloads it to your +local desktop via your web browser. +Currently your configuration and data files total approximately +[_3]. The backup file will be somewhat less than this, +depending on how much the data can be compressed. +This file can be used to restore the server from the console if you +copy it to a local removable disk such as a USB disk.

+

All backup methods allow you to restore your configuration and user +data files. Workstation backup provides individual file restore. Ideally, +full restore should be performed on a freshly installed server.

', +'bac_BACKUP_CONFIG_STATUS' => 'Backup configuration and status', +'bac_BACKUPS_RUN_AT' => 'Regular tape backups will run at: ', +'bac_REMINDER_MESSAGE_AT' => 'Reminder messages will be sent at: ', +'bac_TAPE_BACKUPS' => 'Tape backups are ', +'bac_DESKTOP_BACKUP' => 'Backup to desktop', +'bac_DESKTOP_RESTORE' => 'Restore from desktop', +'bac_DESKTOP_VERIFY' => 'Verify desktop backup file', +'bac_TAPE_CONFIGURE' => 'Configure tape backup', +'bac_TAPE_RESTORE' => 'Restore from tape', +'bac_RESTORE_IN_PROGRESS_BEGAN_AT' => 'A system restore is in progress. It began at: ', +'bac_REFRESH_THIS_DISPLAY' => 'Refresh this display', +'bac_CONFIGURE_TAPE_BACKUP' => 'Configure tape backup', +'bac_RESTORE_COMPLETED' => 'A system restore has completed', +'bac_STARTED_AT' => 'It began at: ', +'bac_FINISHED_AT' => 'and finished at: ', +'bac_YOU_MUST_REBOOT' => 'You must reboot the server to activate any configuration changes that were +made as a result of this restore.', +'bac_REBOOT' => 'Reboot', +'bac_SELECT_AN_ACTION' => 'Select an action', +'bac_X_BACKUP_OR_RESTORE' => 'X Backup or restore server data', +'bac_ERR_PRE_BACKUP' => 'Error occurred during pre-backup actions.', +'bac_ERR_PRE_RESTORE' => 'Error occurred during pre-restore actions.', +'bac_ERR_POST_BACKUP' => 'Error occurred during post-backup actions.', +'bac_RESTORE_SERVER_CONFIG' => 'Restore server configuration', +'bac_DESKTOP_RESTORE_DESC' => 'This process will upload a server backup file from your local desktop to your server and restore the configuration and user data files. The restore should be performed on a freshly installed server.', +'bac_FREE_SPACE' => 'You have approximately [_1] free space on the server. +Check that desktop backup file is less than [_2] before +commencing the restore.', +'bac_MUST_REBOOT_AFTER_RESTORE' => 'After the restore completes you must reboot the server.', +'bac_FILE_TO_RESTORE' => 'Backup file to restore from', +'bac_VERIFY_BACKUP_DESC' => ' +

This option will display the names of all files +in a previously created desktop backup file. You +can use this option to verify the contents of the +backup file.

', +'bac_SELECT_BACKUP_FILE' => 'Select backup file', +'bac_VERIFY' => 'Verify', +'bac_RESTORE_CANNOT_PROCEED' => 'Unable to proceed with restore of server configuration', +'bac_ANOTHER_RESTORE_IN_PROGRESS' => 'Another restore is in progress. Please try again later.', +'bac_RESTORE_IN_PROGRESS' => 'Restore in progress', +'bac_RESTORE_IN_PROGRESS_DESC' => 'After the restore completes you must reboot the server. Your restore is +complete when the words "Restore complete" appear at the bottom of your screen. +', +'bac_FILES_HAVE_BEEN_RESTORED' => 'The following files and directories have been restored:', +'bac_RESTORE_FAILED_MSG' => 'Restore failed! There was an error in reading the backup file.', +'bac_RESTORE_COMPLETE' => 'Restore complete', +'bac_ERR_RESTORING_GID' => 'Error occurred while restoring gid of \'www\'', +'bac_ERR_RESTORING_INITIAL_GRP' => 'Error occurred while restoring initial group of \'www\'.', +'bac_RESTORE_FAILED' => 'Restore failed! The backup file was incomplete.', +'bac_COULD_NOT_EXEC_PIPELINE' => 'Could not execute backup pipeline: ', +'bac_COULD_NOT_DECODE' => 'Could not decode backup file: ', +'bac_FILES_IN_BACKUP' => 'The following files are considered in the backup :', +'bac_VERIFY_COMPLETE' => 'Verification is complete', +'bac_BACKUP_FILE_INCOMPLETE' => 'The backup file was incomplete', +'bac_ERR_READING_FILE' => 'There was an error in reading the backup file.', +'bac_ENABLE_DISABLE_TAPE' => 'Enable/Disable Nightly Tape Backup', +'bac_TAPE_CONFIG_DESC' => '

Select whether you wish to enable nightly backups. Then indicate the +desired times for the backup and the load tape reminder.

The tape +backup requires a supported tape drive. A warning message will be sent to +the administrator at the designated reminder time if the tape drive is +empty.

', +'bac_ENABLE_TAPE_BACKUP' => 'Enable tape backup', +'bac_TAPE_BACKUP_TIME' => 'Tape backup time of day (hour/min)', +'bac_LOAD_TAPE_REMINDER_TIME' => 'Load tape reminder time of day (hour/min)', +'bac_AM/PM' => 'AM/PM', +'bac_AM' => 'AM', +'bac_PM' => 'PM', +'bac_UPDATE_CONF' => 'Update', +'bac_UPDATING_TAPE_CONF' => 'Updating tape backup configuration', +'bac_ERR_INVALID_HOUR' => 'Error: invalid backup hour: ', +'bac_BETWEEN_0_AND_12' => 'Please choose an hour between 0 and 12.', +'bac_ERR_INVALID_MINUTE' => 'Error: invalid backup minute: ', +'bac_BETWEEN_0_AND_59' => 'Please choose a minute between 0 and 59.', +'bac_ERR_INVALID_REMINDER_HOUR' => 'Error: invalid reminder hour: ', +'bac_ERR_INVALID_REMINDER_MINUTE' => 'Error: invalid reminder minute: ', +'bac_ERR_CONF_BACKUP' => 'Error occurred during conf-backup event.', +'bac_SUCCESSFULLY_ENABLED_TAPE' => 'Successfully enabled tape backups', +'bac_WITH_BACKUP_TIME' => 'with backup time: ', +'bac_WITH_REMINDER_TIME' => 'and load tape reminder time: ', +'bac_SUCCESSFULLY_DISABLED' => 'Successfully disabled tape backups', +'bac_RESTORE_CONF_FROM_TAPE' => 'Restore server configuration from tape backup', +'bac_RESTORE_CONF_FROM_TAPE_DESC' => '

This process will restore the configuration and user data files from a +server tape backup. The restore should be performed on a freshly installed server.

+

Ensure that you have loaded the desired backup tape into the tape drive +before proceeding.

+

After the restore completes you must reboot the server.

', +'bac_RESTORE_FROM_TAPE' => 'Restore From Tape', +'bac_UNABLE_TO_RESTORE_CONF' => 'Unable to restore server configuration', +'bac_RESTORING_FROM_TAPE' => 'Restoring From Tape', +'bac_NOW_RESTORING_FROM_TAPE' => 'Your server configuration and user data +files are now being restored from tape.', +'bac_ERR_RESTORING_FROM_TAPE' => 'Error occurred restoring files from tape.', +'bac_ERR_UPDATING_CONF_AFTER_TAPE_RESTORE' => 'Error occurred while updating system configuration after tape +restore.', +'bac_COULD_NOT_FORK' => 'Could not fork: ', +'bac_SERVER_REBOOT' => 'Server reboot', +'bac_SERVER_WILL_REBOOT' => 'Your server will now reboot.', +'bac_NO_UID_FOR_NAME' => 'Could not get uid for user named: ', +'bac_PAGE_REFRESH_IN' => 'This page will refresh to the status display in [_1] seconds, or +click here.', +'Backup or restore' => 'Backup or restore', +'bac_BACKUP_DESKTOP_TOO_BIG' => 'Your server has too much data for a reliable backup to desktop.', +'bac_WORKSTN_BACKUPS' => 'Workstation backups are ', +'bac_WKBACKUPS_RUN_AT' => 'Regular workstation backups will run at: ', +'bac_WORKSTN_CONFIGURE' => 'Configure workstation backup', +'bac_WORKSTN_VERIFY' => 'Verify workstation backup', +'bac_WORKSTN_RESTORE' => 'Restore from workstation', +'bac_CONFIGURE_WORKSTN_BACKUP' => 'Configure Workstation Backup', +'bac_ENABLE_DISABLE_WORKSTN' => 'Enable/Disable Daily Workstation Backup', +'bac_ENABLE_WORKSTN_BACKUP' => 'Enable Workstation Backup', +'bac_WORKSTN_BACKUP_TIME' => 'Workstation backup time of day (hour/min)', +'bac_UPDATING_WORKSTN_CONF' => 'Updating workstation backup configuration', +'bac_SUCCESSFULLY_ENABLED_WORKSTN' => 'Successfully enabled workstation backups', +'bac_SUCCESSFULLY_DISABLED_WORKSTN' => 'Successfully disabled workstation backups', +'bac_VERIFY_WORKSTN_BACKUP_FILE' => 'Verify workstation backup', +'bac_VERIFY_WORKSTN_BACKUP_DESC' => '

This option will display the names of all files +in a previously created workstation daily backup. You +can use this option to verify the contents of the +backup.You must choose the backup you want to verify

+

Only files flagged with (Saved) are contained in the backup.

+
Backup files are verified from shared folder :', +'bac_RESTORE_CONF_FROM_WORKSTN' => 'Restore server configuration from workstation backup', +'bac_RESTORE_CONF_FROM_WORKSTN_DESC' => '

This process will restore the configuration and user data files from a +Server workstation backup. The restore +should be performed on a freshly installed Server.

+

Ensure that choose the right backup to restore below +before proceeding.

+

After the restore completes you must reboot the server.

+Backup will be restored from : ', +'bac_RESTORE_FROM_WORKSTN' => 'Restore From Workstation', +'bac_RESTORING_FROM_WORKSTN' => 'Restoring From Workstation', +'bac_NOW_RESTORING_FROM_WORKSTN' => 'Your server configuration and user data +files are now being restored from workstation shared folder.', +'bac_ERR_RESTORING_FROM_WORKSTN' => 'Error occurred restoring files from workstation.', +'bac_ERR_UPDATING_CONF_AFTER_WORKSTN_RESTORE' => 'Error occurred while updating system configuration after workstation +restore.', +'bac_WORKSTN_NAME' => 'Workstation IP or hostname', +'bac_WORKSTN_BACKUP_SETTINGS' => 'Workstation Backup Settings', +'bac_SHARED_FOLDER_NAME' => 'Backup share', +'bac_WORKSTN_LOGIN' => 'Login name', +'bac_WORKSTATION_BACKUP_DEST' => 'Backup workstation settings', +'bac_CONFIGURE_WORKSTN_BACKUP_DESC' => 'You can set the number of +successive backup sets to keep on the workstation, with automatic rotation. +Each set may contain saved data for several consecutive days. +In this case first backup of the set is full backup, others daily backups are +incremental. You can also set a time limit for each backup session or for incremental +backups only. When this limit occurs, backup is cleanly stopped and the next +incremental backup will safely continue with unsaved and modified datas.', +'bac_ERR_INVALID_WORKSTN' => 'Invalid Workstation IP or Hostname ', +'bac_ERR_INVALID_FOLDER' => 'Invalid share name', +'bac_ERR_INVALID_LOGIN' => 'Invalid Login', +'bac_ERR_INVALID_PASSWORD' => 'Invalid Password', +'bac_ERR_ALREADY_MOUNTED' => 'Backup directory is already mounted', +'bac_ERR_MOUNTING_SMBSHARE' => 'Unable to mount workstation shared folder', +'bac_ERR_NOT_MOUNTED' => 'Backup directory is not mounted', +'bac_WORKSTN_NOT_SET' => 'You must first correctly configure your workstation backup', +'bac_NO_BACKUPS_TO_RESTORE' => 'There is no backup set on configured workstation shared folder. Verify your configuration settings.', +'bac_NUMBER_OF_SETS' => 'Number of rotating backup sets', +'bac_NUMBER_OF_FILES_IN_SET' => 'Daily backups in each set', +'bac_ERR_INVALID_SETS_NUMBER' => 'Sets number must be 1 or greater', +'bac_ERR_INVALID_FILES_IN_SET_NUMBER' => 'This number must be 1 or greater. First backup in set is full others are incrementals', +'bac_WORKSTN_TIMEOUT' => 'Optional backup session timeout (hours)', +'bac_INC_ONLY_TIMEOUT' => 'Don\'t timeout full backup sessions', +'bac_ERR_INVALID_TIMEOUT' => 'Maximum backup time must be set between 1 and 24 hours', +'bac_ERR_NO_HOST_DIR' => 'No directory for your host in shared folder. Maybe your host name is different from backup ones', +'bac_ERROR_READING_FILE' => 'Error while reading files from', +'bac_WORKSTN_SEL_RESTORE' => 'Selective file restore from workstation', +'bac_WORKSTN_SELECTIVE_RESTORE' => 'Workstation selective file restore', +'bac_ALL_BACKUPS' => 'All backups', +'bac_WORKSTN_SEL_REST_DESC' => 'This process will restore only specified files and directories. You must first choose +the backup from which the files will be restored. If you don\'t know in which backup +are the required files, you can select \'All backups\' option.

+The next panel will display available files and directories, +so you can choose the ones to restore. To restrict the number of files and directories +displayed in this panel, you have the option to give now a filtering expression, +applied as a regular expression to the displayed names.

+You have the responsibility not to restore files which could break the +functioning of your server.

Currently, files will be restored from :', +'bac_BACKUP_CHOICE' => 'Selecting files to display', +'bac_SELECT_DATE_BEFORE' => 'Restore most recent before', +'bac_FILTER_EXPRESSION' => 'Names filtered by', +'bac_READ_COMPLETE' => 'You can choose all the directories and files you want to restore in the displayed list +(use ctrl or shift for multiple selection).
Warning : If you select a directory, +all contained files and directories will be restored.

+By default the most recent version of selected files is restored, but if you specify a date +in the format ~[~[~[yyyy/~]mm/~]dd-~]hh:mm~[:ss~] the process +will restore only the most recent version modified before the given date.', +'bac_ERR_INVALID_SELDATE' => 'Date format is invalid, must be ~[~[~[yyyy/~]mm/~]dd-~]hh:mm~[:ss~]. ie: 2005/12/31-08:23:32 or +10-08:32 or 08:32', +'bac_SELECT_FILES_TO_RESTORE' => 'Select files to restore', +'bac_ERR_WHILE_UNMOUNTING' => 'Error occurs when unmounting distant share', +'bac_ERR_DAR_CATALOG' => 'Error when using Dar catalog', +'bac_COMPRESSION_LEVEL' => 'Backup compression level ~[0-9~]', +'bac_FULL_ONLY_ON' => 'Full backup is allowed on', +'bac_ERR_INVALID_COMPRESSION' => 'Compression level must be set between 0 (no compression) and 9 (maximum compression)', +'bac_DOW' => 'Sunday Monday Tuesday Wednesday Thursday Friday Saturday Everyday', +'bac_CONFIGURATION_TO_BE_DONE' => 'Please configure the backup settings.', +'bac_WORKSTN_BACKUP_DESC' => '

This panel displays the present workstation backup configuration. You can +change it in this panel and the next one.

', +'bac_WORKSTN_BACKUP_NOT_CONFIGURED' => '

Presently, workstation backup is not configured. You can set this configuration +with this panel and the next one.

', +'bac_WORKSTN_BACKUP_ENABLED' => 'Backup is ', +'bac_WORKSTN_BACKUP_USB' => 'Backup is made on local removable disk', +'bac_WORKSTN_BACKUP_MNT' => 'Backup is made on mounted disk', +'bac_WORKSTN_BACKUP_HOST' => 'Backup is made on LAN workstation ', +'bac_WORKSTN_BACKUP_VFSTYPE' => ' via ', +'bac_WORKSTN_BACKUP_SHARE' => 'Destination backup share folder is ', +'bac_WORKSTN_BACKUP_TOD' => 'Daily backup occurs at ', +'bac_LOGIN' => 'Login is ', +'bac_PASSWORD' => 'Password is ', +'bac_WORKSTN_BACKUP_SETSNUM' => 'Number of rotating backup sets is ', +'bac_WORKSTN_BACKUP_DAYSINSET' => 'Number of daily backups contained in each set is ', +'bac_WORKSTN_BACKUP_COMPRESSION' => 'Compression level (0-9) of backup is ', +'bac_WORKSTN_BACKUP_TIMEOUT' => 'Each daily backup session is cleanly timed out after ', +'bac_WORKSTN_BACKUP_INCONLY_TIMEOUT' => 'except full backups which are cleanly timed out after 24 hours', +'bac_WORKSTN_FULL_BACKUP_EVERYDAY' => 'Full backup sessions (new backup set) are allowed everyday', +'bac_WORKSTN_FULL_BACKUP_DAY' => 'Full backup session (new backup sets) is allowed only on', +'bac_WORKSTATION_BACKUP_SETCONF' => 'Create or modify workstation backup configuration', +'bac_SELECT_VFS_TYPE' => 'Select the type of share for backup destination', +'bac_ERR_NO_USB_DISK' => 'Error : No removable disk available. Please connect a removable disk or select another type of workstation backup.', +'bac_ERR_NO_MOUNTED_DISK' => 'Error : No mounted disk available. Please mount a disk or select another type of workstation backup.', +'bac_HOURS' => 'hours.', +'bac_ERR_NO_FULL_BACKUP' => 'Aborting restore because needed full backup is missing or unreadable.', +'bac_ERR_NO_INC_BACKUP' => 'Aborting restore because the set has missing or unreadable incremental backup number', +'bac_CHECK_TO_VERIFY_FULL_RESTORE' => 'Check here to test integrity of all backups needed for a full restore with the selected backup ', +'bac_TESTING_NEEDED_BACKUPS_FOR_RESTORE' => 'Testing all backups needed for a full restore with selected backup', +'bac_TESTED_BACKUP' => 'Testing integrity of backup', +'bac_RESTORE_VERIFY_FAILED' => 'Verify integrity failed', +'bac_CHECK_INTEGRITY_WARNING' => 'Warning : For large backups, checking integrity may be a long task and should be made with daily workstation backup disabled.', +'bac_cifs' => 'cifs', +'bac_nfs' => 'nfs', +'bac_local removable disk' => 'Local removable disk', +'bac_Mounted disk' => 'Mounted disk', +'bac_ERROR_WHEN_TESTING_REMOTE_SERVER' => 'The parameters have been saved, however the remote host is not reachable, please check your settings.', +'bac_ERR_EXTRACT' => 'Error when extracting with Dar', +