diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Backup/pofiles/backup_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Backup/pofiles/backup_en.po deleted file mode 100644 index dc00ed2..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Backup/pofiles/backup_en.po +++ /dev/null @@ -1,883 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "bac_No suitable local devices found" -msgid "No suitable local devices found" -msgstr "" - -msgctxt "bac_BACKUP_TITLE" -msgid "Backup or restore server data" -msgstr "" - -msgctxt "bac_BACKUP_DESC" -msgid "" -"

The server provides two ways to back up and restore\n" -"your server: using your local desktop or a tape drive.

\n" -"

The first method creates a copy of your server configuration and user\n" -"data files, and downloads it to your local desktop via your web browser.\n" -"Currently your configuration and data files total approximately\n" -"[_1]. The backup file will be somewhat less than this,\n" -"depending on how compressible the data are. The \\\"Verify desktop backup\n" -"file\\\" option can be used to check the integrity of a desktop backup\n" -"file.

\n" -"

The tape backup method uses a software package called [_2]\n" -"to back up your entire hard disk to tape every night. This requires a\n" -"supported tape drive and a tape that is not write-protected. The backup\n" -"is performed automatically at the selected time every night (with a\n" -"reminder automatically e-mailed to the administrator during the day).\n" -"Currently your hard disk contains [_3] of data.

\n" -"

Both restore methods allow you to restore your configuration and user\n" -"data files. Ideally, the restore should be performed on a freshly\n" -"installed server.

" -msgstr "" - -msgctxt "bac_BACKUP_DESC_DAR" -msgid "" -"

Three ways are provided to back up and restore your \n" -"server: using a tape drive, using a network share or a local \n" -"removable disk, or using your local desktop.

\n" -"

Tape Backup. This method uses a software package called [_1]\n" -"to back up your entire hard disk to tape every night. This requires a\n" -"supported tape drive and a tape that is not write-protected. The backup\n" -"is performed automatically at the selected time every night (with a\n" -"reminder automatically e-mailed to the administrator during the day).\n" -"Currently your hard disk contains [_2] of data.

\n" -"

Workstation backup. This method uses a software package called dar\n" -"to back up your server configuration and data files to a network share \n" -"or a local removable disk such as a USB disk. \n" -"You can manage how many rotating sets of backups are kept,\n" -"and how many incremental backups to have in each set. \n" -"The backup is performed automatically at the selected time every day. Currently \n" -"configuration and data files total approximately [_3] uncompressed.\n" -"Twice the compressed data size must be available on the backup share.

\n" -"

Backup to Desktop. This method creates a copy of your server \n" -"configuration and user data files, and downloads it to your \n" -"local desktop via your web browser.\n" -"Currently your configuration and data files total approximately\n" -"[_3]. The backup file will be somewhat less than this,\n" -"depending on how much the data can be compressed. \n" -"This file can be used to restore the server from the console if you \n" -"copy it to a local removable disk such as a USB disk.

\n" -"

All backup methods allow you to restore your configuration and user\n" -"data files. Workstation backup provides individual file restore. Ideally, \n" -"full restore should be performed on a freshly installed server.

" -msgstr "" - -msgctxt "bac_BACKUP_CONFIG_STATUS" -msgid "Backup configuration and status" -msgstr "" - -msgctxt "bac_BACKUPS_RUN_AT" -msgid "Regular tape backups will run at:" -msgstr "" - -msgctxt "bac_REMINDER_MESSAGE_AT" -msgid "Reminder messages will be sent at:" -msgstr "" - -msgctxt "bac_TAPE_BACKUPS" -msgid "Tape backups are" -msgstr "" - -msgctxt "bac_DESKTOP_BACKUP" -msgid "Backup to desktop" -msgstr "" - -msgctxt "bac_DESKTOP_RESTORE" -msgid "Restore from desktop" -msgstr "" - -msgctxt "bac_DESKTOP_VERIFY" -msgid "Verify desktop backup file" -msgstr "" - -msgctxt "bac_TAPE_CONFIGURE" -msgid "Configure tape backup" -msgstr "" - -msgctxt "bac_TAPE_RESTORE" -msgid "Restore from tape" -msgstr "" - -msgctxt "bac_RESTORE_IN_PROGRESS_BEGAN_AT" -msgid "A system restore is in progress. It began at:" -msgstr "" - -msgctxt "bac_REFRESH_THIS_DISPLAY" -msgid "Refresh this display" -msgstr "" - -msgctxt "bac_CONFIGURE_TAPE_BACKUP" -msgid "Configure tape backup" -msgstr "" - -msgctxt "bac_RESTORE_COMPLETED" -msgid "A system restore has completed" -msgstr "" - -msgctxt "bac_STARTED_AT" -msgid "It began at:" -msgstr "" - -msgctxt "bac_FINISHED_AT" -msgid "and finished at:" -msgstr "" - -msgctxt "bac_YOU_MUST_REBOOT" -msgid "" -"You must reboot the server to activate any configuration changes that were\n" -"made as a result of this restore." -msgstr "" - -msgctxt "bac_REBOOT" -msgid "Reboot" -msgstr "" - -msgctxt "bac_SELECT_AN_ACTION" -msgid "Select an action" -msgstr "" - -msgctxt "bac_X_BACKUP_OR_RESTORE" -msgid "X Backup or restore server data" -msgstr "" - -msgctxt "bac_ERR_PRE_BACKUP" -msgid "Error occurred during pre-backup actions." -msgstr "" - -msgctxt "bac_ERR_PRE_RESTORE" -msgid "Error occurred during pre-restore actions." -msgstr "" - -msgctxt "bac_ERR_POST_BACKUP" -msgid "Error occurred during post-backup actions." -msgstr "" - -msgctxt "bac_RESTORE_SERVER_CONFIG" -msgid "Restore server configuration" -msgstr "" - -msgctxt "bac_DESKTOP_RESTORE_DESC" -msgid "" -"This process will upload a server backup file from your local desktop to " -"your server and restore the configuration and user data files. The " -"restore should be performed on a freshly installed server." -msgstr "" - -msgctxt "bac_FREE_SPACE" -msgid "" -"You have approximately [_1] free space on the server.\n" -"Check that desktop backup file is less than [_2] before\n" -"commencing the restore." -msgstr "" - -msgctxt "bac_MUST_REBOOT_AFTER_RESTORE" -msgid "After the restore completes you must reboot the server." -msgstr "" - -msgctxt "bac_FILE_TO_RESTORE" -msgid "Backup file to restore from" -msgstr "" - -msgctxt "bac_VERIFY_BACKUP_DESC" -msgid "" -"

This option will display the names of all files\n" -"in a previously created desktop backup file. You\n" -"can use this option to verify the contents of the\n" -"backup file.

" -msgstr "" - -msgctxt "bac_SELECT_BACKUP_FILE" -msgid "Select backup file" -msgstr "" - -msgctxt "bac_VERIFY" -msgid "Verify" -msgstr "" - -msgctxt "bac_RESTORE_CANNOT_PROCEED" -msgid "Unable to proceed with restore of server configuration" -msgstr "" - -msgctxt "bac_ANOTHER_RESTORE_IN_PROGRESS" -msgid "Another restore is in progress. Please try again later." -msgstr "" - -msgctxt "bac_RESTORE_IN_PROGRESS" -msgid "Restore in progress" -msgstr "" - -msgctxt "bac_RESTORE_IN_PROGRESS_DESC" -msgid "" -"After the restore completes you must reboot the server. Your restore is\n" -"complete when the words \"Restore complete\" appear at the bottom of your screen." -msgstr "" - -msgctxt "bac_FILES_HAVE_BEEN_RESTORED" -msgid "The following files and directories have been restored:" -msgstr "" - -msgctxt "bac_RESTORE_FAILED_MSG" -msgid "Restore failed! There was an error in reading the backup file." -msgstr "" - -msgctxt "bac_RESTORE_COMPLETE" -msgid "Restore complete" -msgstr "" - -msgctxt "bac_ERR_RESTORING_GID" -msgid "Error occurred while restoring gid of \\'www\\'" -msgstr "" - -msgctxt "bac_ERR_RESTORING_INITIAL_GRP" -msgid "Error occurred while restoring initial group of \\'www\\'." -msgstr "" - -msgctxt "bac_RESTORE_FAILED" -msgid "Restore failed! The backup file was incomplete." -msgstr "" - -msgctxt "bac_COULD_NOT_EXEC_PIPELINE" -msgid "Could not execute backup pipeline:" -msgstr "" - -msgctxt "bac_COULD_NOT_DECODE" -msgid "Could not decode backup file:" -msgstr "" - -msgctxt "bac_FILES_IN_BACKUP" -msgid "The following files are considered in the backup :" -msgstr "" - -msgctxt "bac_VERIFY_COMPLETE" -msgid "Verification is complete" -msgstr "" - -msgctxt "bac_BACKUP_FILE_INCOMPLETE" -msgid "The backup file was incomplete" -msgstr "" - -msgctxt "bac_ERR_READING_FILE" -msgid "There was an error in reading the backup file." -msgstr "" - -msgctxt "bac_ENABLE_DISABLE_TAPE" -msgid "Enable/Disable Nightly Tape Backup" -msgstr "" - -msgctxt "bac_TAPE_CONFIG_DESC" -msgid "" -"

Select whether you wish to enable nightly backups. Then indicate the\n" -"desired times for the backup and the load tape reminder.

The tape\n" -"backup requires a supported tape drive. A warning message will be sent to\n" -"the administrator at the designated reminder time if the tape drive is\n" -"empty.

" -msgstr "" - -msgctxt "bac_ENABLE_TAPE_BACKUP" -msgid "Enable tape backup" -msgstr "" - -msgctxt "bac_TAPE_BACKUP_TIME" -msgid "Tape backup time of day (hour/min)" -msgstr "" - -msgctxt "bac_LOAD_TAPE_REMINDER_TIME" -msgid "Load tape reminder time of day (hour/min)" -msgstr "" - -msgctxt "bac_AM/PM" -msgid "AM/PM" -msgstr "" - -msgctxt "bac_AM" -msgid "AM" -msgstr "" - -msgctxt "bac_PM" -msgid "PM" -msgstr "" - -msgctxt "bac_UPDATE_CONF" -msgid "Update" -msgstr "" - -msgctxt "bac_UPDATING_TAPE_CONF" -msgid "Updating tape backup configuration" -msgstr "" - -msgctxt "bac_ERR_INVALID_HOUR" -msgid "Error: invalid backup hour:" -msgstr "" - -msgctxt "bac_BETWEEN_0_AND_12" -msgid "Please choose an hour between 0 and 12." -msgstr "" - -msgctxt "bac_ERR_INVALID_MINUTE" -msgid "Error: invalid backup minute:" -msgstr "" - -msgctxt "bac_BETWEEN_0_AND_59" -msgid "Please choose a minute between 0 and 59." -msgstr "" - -msgctxt "bac_ERR_INVALID_REMINDER_HOUR" -msgid "Error: invalid reminder hour:" -msgstr "" - -msgctxt "bac_ERR_INVALID_REMINDER_MINUTE" -msgid "Error: invalid reminder minute:" -msgstr "" - -msgctxt "bac_ERR_CONF_BACKUP" -msgid "Error occurred during conf-backup event." -msgstr "" - -msgctxt "bac_SUCCESSFULLY_ENABLED_TAPE" -msgid "Successfully enabled tape backups" -msgstr "" - -msgctxt "bac_WITH_BACKUP_TIME" -msgid "with backup time:" -msgstr "" - -msgctxt "bac_WITH_REMINDER_TIME" -msgid "and load tape reminder time:" -msgstr "" - -msgctxt "bac_SUCCESSFULLY_DISABLED" -msgid "Successfully disabled tape backups" -msgstr "" - -msgctxt "bac_RESTORE_CONF_FROM_TAPE" -msgid "Restore server configuration from tape backup" -msgstr "" - -msgctxt "bac_RESTORE_CONF_FROM_TAPE_DESC" -msgid "" -"

This process will restore the configuration and user data files from a\n" -"server tape backup. The restore should be performed on a freshly installed server.

\n" -"

Ensure that you have loaded the desired backup tape into the tape drive\n" -"before proceeding.

\n" -"

After the restore completes you must reboot the server.

" -msgstr "" - -msgctxt "bac_RESTORE_FROM_TAPE" -msgid "Restore From Tape" -msgstr "" - -msgctxt "bac_UNABLE_TO_RESTORE_CONF" -msgid "Unable to restore server configuration" -msgstr "" - -msgctxt "bac_RESTORING_FROM_TAPE" -msgid "Restoring From Tape" -msgstr "" - -msgctxt "bac_NOW_RESTORING_FROM_TAPE" -msgid "" -"Your server configuration and user data\n" -"files are now being restored from tape." -msgstr "" - -msgctxt "bac_ERR_RESTORING_FROM_TAPE" -msgid "Error occurred restoring files from tape." -msgstr "" - -msgctxt "bac_ERR_UPDATING_CONF_AFTER_TAPE_RESTORE" -msgid "" -"Error occurred while updating system configuration after tape \n" -"restore." -msgstr "" - -msgctxt "bac_COULD_NOT_FORK" -msgid "Could not fork:" -msgstr "" - -msgctxt "bac_SERVER_REBOOT" -msgid "Server reboot" -msgstr "" - -msgctxt "bac_SERVER_WILL_REBOOT" -msgid "Your server will now reboot." -msgstr "" - -msgctxt "bac_NO_UID_FOR_NAME" -msgid "Could not get uid for user named:" -msgstr "" - -msgctxt "bac_PAGE_REFRESH_IN" -msgid "" -"This page will refresh to the status display in [_1] seconds, or\n" -"click here." -msgstr "" - -msgctxt "Backup or restore" -msgid "Backup or restore" -msgstr "" - -msgctxt "bac_BACKUP_DESKTOP_TOO_BIG" -msgid "Your server has too much data for a reliable backup to desktop." -msgstr "" - -msgctxt "bac_WORKSTN_BACKUPS" -msgid "Workstation backups are" -msgstr "" - -msgctxt "bac_WKBACKUPS_RUN_AT" -msgid "Regular workstation backups will run at:" -msgstr "" - -msgctxt "bac_WORKSTN_CONFIGURE" -msgid "Configure workstation backup" -msgstr "" - -msgctxt "bac_WORKSTN_VERIFY" -msgid "Verify workstation backup" -msgstr "" - -msgctxt "bac_WORKSTN_RESTORE" -msgid "Restore from workstation" -msgstr "" - -msgctxt "bac_CONFIGURE_WORKSTN_BACKUP" -msgid "Configure Workstation Backup" -msgstr "" - -msgctxt "bac_ENABLE_DISABLE_WORKSTN" -msgid "Enable/Disable Daily Workstation Backup" -msgstr "" - -msgctxt "bac_ENABLE_WORKSTN_BACKUP" -msgid "Enable Workstation Backup" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_TIME" -msgid "Workstation backup time of day (hour/min)" -msgstr "" - -msgctxt "bac_UPDATING_WORKSTN_CONF" -msgid "Updating workstation backup configuration" -msgstr "" - -msgctxt "bac_SUCCESSFULLY_ENABLED_WORKSTN" -msgid "Successfully enabled workstation backups" -msgstr "" - -msgctxt "bac_SUCCESSFULLY_DISABLED_WORKSTN" -msgid "Successfully disabled workstation backups" -msgstr "" - -msgctxt "bac_VERIFY_WORKSTN_BACKUP_FILE" -msgid "Verify workstation backup" -msgstr "" - -msgctxt "bac_VERIFY_WORKSTN_BACKUP_DESC" -msgid "" -"

This option will display the names of all files\n" -"in a previously created workstation daily backup. You\n" -"can use this option to verify the contents of the\n" -"backup.You must choose the backup you want to verify

\n" -"

Only files flagged with (Saved) are contained in the backup.

\n" -"
Backup files are verified from shared folder :" -msgstr "" - -msgctxt "bac_RESTORE_CONF_FROM_WORKSTN" -msgid "Restore server configuration from workstation backup" -msgstr "" - -msgctxt "bac_RESTORE_CONF_FROM_WORKSTN_DESC" -msgid "" -"

This process will restore the configuration and user data files from a\n" -"Server workstation backup. The restore\n" -"should be performed on a freshly installed Server.

\n" -"

Ensure that choose the right backup to restore below\n" -"before proceeding.

\n" -"

After the restore completes you must reboot the server.

\n" -"Backup will be restored from :" -msgstr "" - -msgctxt "bac_RESTORE_FROM_WORKSTN" -msgid "Restore From Workstation" -msgstr "" - -msgctxt "bac_RESTORING_FROM_WORKSTN" -msgid "Restoring From Workstation" -msgstr "" - -msgctxt "bac_NOW_RESTORING_FROM_WORKSTN" -msgid "" -"Your server configuration and user data\n" -"files are now being restored from workstation shared folder." -msgstr "" - -msgctxt "bac_ERR_RESTORING_FROM_WORKSTN" -msgid "Error occurred restoring files from workstation." -msgstr "" - -msgctxt "bac_ERR_UPDATING_CONF_AFTER_WORKSTN_RESTORE" -msgid "" -"Error occurred while updating system configuration after workstation \n" -"restore." -msgstr "" - -msgctxt "bac_WORKSTN_NAME" -msgid "Workstation IP or hostname" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_SETTINGS" -msgid "Workstation Backup Settings" -msgstr "" - -msgctxt "bac_SHARED_FOLDER_NAME" -msgid "Backup share" -msgstr "" - -msgctxt "bac_WORKSTN_LOGIN" -msgid "Login name" -msgstr "" - -msgctxt "bac_WORKSTATION_BACKUP_DEST" -msgid "Backup workstation settings" -msgstr "" - -msgctxt "bac_CONFIGURE_WORKSTN_BACKUP_DESC" -msgid "" -"You can set the number of \n" -"successive backup sets to keep on the workstation, with automatic rotation. \n" -"Each set may contain saved data for several consecutive days.\n" -"In this case first backup of the set is full backup, others daily backups are \n" -"incremental. You can also set a time limit for each backup session or for incremental \n" -"backups only. When this limit occurs, backup is cleanly stopped and the next \n" -"incremental backup will safely continue with unsaved and modified datas." -msgstr "" - -msgctxt "bac_ERR_INVALID_WORKSTN" -msgid "Invalid Workstation IP or Hostname" -msgstr "" - -msgctxt "bac_ERR_INVALID_FOLDER" -msgid "Invalid share name" -msgstr "" - -msgctxt "bac_ERR_INVALID_LOGIN" -msgid "Invalid Login" -msgstr "" - -msgctxt "bac_ERR_INVALID_PASSWORD" -msgid "Invalid Password" -msgstr "" - -msgctxt "bac_ERR_ALREADY_MOUNTED" -msgid "Backup directory is already mounted" -msgstr "" - -msgctxt "bac_ERR_MOUNTING_SMBSHARE" -msgid "Unable to mount workstation shared folder" -msgstr "" - -msgctxt "bac_ERR_NOT_MOUNTED" -msgid "Backup directory is not mounted" -msgstr "" - -msgctxt "bac_WORKSTN_NOT_SET" -msgid "You must first correctly configure your workstation backup" -msgstr "" - -msgctxt "bac_NO_BACKUPS_TO_RESTORE" -msgid "" -"There is no backup set on configured workstation shared folder. Verify your " -"configuration settings." -msgstr "" - -msgctxt "bac_NUMBER_OF_SETS" -msgid "Number of rotating backup sets" -msgstr "" - -msgctxt "bac_NUMBER_OF_FILES_IN_SET" -msgid "Daily backups in each set" -msgstr "" - -msgctxt "bac_ERR_INVALID_SETS_NUMBER" -msgid "Sets number must be 1 or greater" -msgstr "" - -msgctxt "bac_ERR_INVALID_FILES_IN_SET_NUMBER" -msgid "" -"This number must be 1 or greater. First backup in set is full others " -"are incrementals" -msgstr "" - -msgctxt "bac_WORKSTN_TIMEOUT" -msgid "Optional backup session timeout (hours)" -msgstr "" - -msgctxt "bac_INC_ONLY_TIMEOUT" -msgid "Don\\'t timeout full backup sessions" -msgstr "" - -msgctxt "bac_ERR_INVALID_TIMEOUT" -msgid "Maximum backup time must be set between 1 and 24 hours" -msgstr "" - -msgctxt "bac_ERR_NO_HOST_DIR" -msgid "" -"No directory for your host in shared folder. Maybe your host name is " -"different from backup ones" -msgstr "" - -msgctxt "bac_ERROR_READING_FILE" -msgid "Error while reading files from" -msgstr "" - -msgctxt "bac_WORKSTN_SEL_RESTORE" -msgid "Selective file restore from workstation" -msgstr "" - -msgctxt "bac_WORKSTN_SELECTIVE_RESTORE" -msgid "Workstation selective file restore" -msgstr "" - -msgctxt "bac_ALL_BACKUPS" -msgid "All backups" -msgstr "" - -msgctxt "bac_WORKSTN_SEL_REST_DESC" -msgid "" -"This process will restore only specified files and directories. You must first choose \n" -"the backup from which the files will be restored. If you don\\'t know in which backup \n" -"are the required files, you can select \\'All backups\\' option.

\n" -"The next panel will display available files and directories, \n" -"so you can choose the ones to restore. To restrict the number of files and directories \n" -"displayed in this panel, you have the option to give now a filtering expression, \n" -"applied as a regular expression to the displayed names.

\n" -"You have the responsibility not to restore files which could break the\n" -"functioning of your server.

Currently, files will be restored from :" -msgstr "" - -msgctxt "bac_BACKUP_CHOICE" -msgid "Selecting files to display" -msgstr "" - -msgctxt "bac_SELECT_DATE_BEFORE" -msgid "Restore most recent before" -msgstr "" - -msgctxt "bac_FILTER_EXPRESSION" -msgid "Names filtered by" -msgstr "" - -msgctxt "bac_READ_COMPLETE" -msgid "" -"You can choose all the directories and files you want to restore in the displayed list \n" -"(use ctrl or shift for multiple selection).
Warning : If you select a directory, \n" -"all contained files and directories will be restored.

\n" -"By default the most recent version of selected files is restored, but if you specify a date \n" -"in the format ~[~[~[yyyy/~]mm/~]dd-~]hh:mm~[:ss~] the process \n" -"will restore only the most recent version modified before the given date." -msgstr "" - -msgctxt "bac_ERR_INVALID_SELDATE" -msgid "" -"Date format is invalid, must be ~[~[~[yyyy/~]mm/~]dd-~]hh:mm~[:ss~]. ie: 2005/12/31-08:23:32 or \n" -"10-08:32 or 08:32" -msgstr "" - -msgctxt "bac_SELECT_FILES_TO_RESTORE" -msgid "Select files to restore" -msgstr "" - -msgctxt "bac_ERR_WHILE_UNMOUNTING" -msgid "Error occurs when unmounting distant share" -msgstr "" - -msgctxt "bac_ERR_DAR_CATALOG" -msgid "Error when using Dar catalog" -msgstr "" - -msgctxt "bac_COMPRESSION_LEVEL" -msgid "Backup compression level ~[0-9~]" -msgstr "" - -msgctxt "bac_FULL_ONLY_ON" -msgid "Full backup is allowed on" -msgstr "" - -msgctxt "bac_ERR_INVALID_COMPRESSION" -msgid "" -"Compression level must be set between 0 (no compression) and 9 (maximum " -"compression)" -msgstr "" - -msgctxt "bac_DOW" -msgid "Sunday Monday Tuesday Wednesday Thursday Friday Saturday Everyday" -msgstr "" - -msgctxt "bac_CONFIGURATION_TO_BE_DONE" -msgid "Please configure the backup settings." -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_DESC" -msgid "" -"

This panel displays the present workstation backup configuration. You can \n" -"change it in this panel and the next one.

" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_NOT_CONFIGURED" -msgid "" -"

Presently, workstation backup is not configured. You can set this configuration\n" -"with this panel and the next one.

" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_ENABLED" -msgid "Backup is" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_USB" -msgid "Backup is made on local removable disk" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_MNT" -msgid "Backup is made on mounted disk" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_HOST" -msgid "Backup is made on LAN workstation" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_VFSTYPE" -msgid "via" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_SHARE" -msgid "Destination backup share folder is" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_TOD" -msgid "Daily backup occurs at" -msgstr "" - -msgctxt "bac_LOGIN" -msgid "Login is" -msgstr "" - -msgctxt "bac_PASSWORD" -msgid "Password is" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_SETSNUM" -msgid "Number of rotating backup sets is" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_DAYSINSET" -msgid "Number of daily backups contained in each set is" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_COMPRESSION" -msgid "Compression level (0-9) of backup is" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_TIMEOUT" -msgid "Each daily backup session is cleanly timed out after" -msgstr "" - -msgctxt "bac_WORKSTN_BACKUP_INCONLY_TIMEOUT" -msgid "except full backups which are cleanly timed out after 24 hours" -msgstr "" - -msgctxt "bac_WORKSTN_FULL_BACKUP_EVERYDAY" -msgid "Full backup sessions (new backup set) are allowed everyday" -msgstr "" - -msgctxt "bac_WORKSTN_FULL_BACKUP_DAY" -msgid "Full backup session (new backup sets) is allowed only on" -msgstr "" - -msgctxt "bac_WORKSTATION_BACKUP_SETCONF" -msgid "Create or modify workstation backup configuration" -msgstr "" - -msgctxt "bac_SELECT_VFS_TYPE" -msgid "Select the type of share for backup destination" -msgstr "" - -msgctxt "bac_ERR_NO_USB_DISK" -msgid "" -"Error : No removable disk available. Please connect a removable disk or " -"select another type of workstation backup." -msgstr "" - -msgctxt "bac_ERR_NO_MOUNTED_DISK" -msgid "" -"Error : No mounted disk available. Please mount a disk or select another " -"type of workstation backup." -msgstr "" - -msgctxt "bac_HOURS" -msgid "hours." -msgstr "" - -msgctxt "bac_ERR_NO_FULL_BACKUP" -msgid "Aborting restore because needed full backup is missing or unreadable." -msgstr "" - -msgctxt "bac_ERR_NO_INC_BACKUP" -msgid "" -"Aborting restore because the set has missing or unreadable incremental " -"backup number" -msgstr "" - -msgctxt "bac_CHECK_TO_VERIFY_FULL_RESTORE" -msgid "" -"Check here to test integrity of all backups needed for a full restore with " -"the selected backup" -msgstr "" - -msgctxt "bac_TESTING_NEEDED_BACKUPS_FOR_RESTORE" -msgid "Testing all backups needed for a full restore with selected backup" -msgstr "" - -msgctxt "bac_TESTED_BACKUP" -msgid "Testing integrity of backup" -msgstr "" - -msgctxt "bac_RESTORE_VERIFY_FAILED" -msgid "Verify integrity failed" -msgstr "" - -msgctxt "bac_CHECK_INTEGRITY_WARNING" -msgid "" -"Warning : For large backups, checking integrity may be a long task and " -"should be made with daily workstation backup disabled." -msgstr "" - -msgctxt "bac_cifs" -msgid "cifs" -msgstr "" - -msgctxt "bac_nfs" -msgid "nfs" -msgstr "" - -msgctxt "bac_local removable disk" -msgid "Local removable disk" -msgstr "" - -msgctxt "bac_Mounted disk" -msgid "Mounted disk" -msgstr "" - -msgctxt "bac_ERROR_WHEN_TESTING_REMOTE_SERVER" -msgid "" -"The parameters have been saved, however the remote host is not reachable, " -"please check your settings." -msgstr "" - -msgctxt "bac_ERR_EXTRACT" -msgid "Error when extracting with Dar" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Bugreport/pofiles/bugreport_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Bugreport/pofiles/bugreport_en.po deleted file mode 100644 index 04fce25..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Bugreport/pofiles/bugreport_en.po +++ /dev/null @@ -1,129 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "bugr_FORM_TITLE" -msgid "Report a Bug" -msgstr "" - -msgctxt "bugr_DO_NOT_PANIC" -msgid "Don\\'t Panic!" -msgstr "" - -msgctxt "bugr_SME_EXPERIENCE" -msgid "" -"Unfortunately there is no software without bugs, and you probably came to " -"this page because of an issue you are experiencing with your SME-server " -"installation." -msgstr "" - -msgctxt "bugr_PLEASE_REPORT_HERE" -msgid "" -"In order to help developers to diagnose and fix your issue, please download " -"one of the following text templates, fill it out and paste it into your bug " -"report at" -msgstr "" - -msgctxt "bugr_USE_TEMPLATE" -msgid "" -"Please refer to the following link on how to report efficiency a bug and use" -" its template" -msgstr "" - -msgctxt "bugr_FOLLOWING_REPORT_MIGHT_HELP" -msgid "" -"It will also help if you provide some vital information on the configuration" -" of your SME-server in your bug report. By clicking on the \"Create " -"configuration report\" button below, you can create and download a text file" -" containing this information. Please attach this file to your bug report as " -"well." -msgstr "" - -msgctxt "bugr_REPORT_CONTENT" -msgid "The report will contain the following information" -msgstr "" - -msgctxt "bugr_SME_VERSION" -msgid "Koozali SME Server version" -msgstr "" - -msgctxt "bugr_SERVER_MODE" -msgid "Server mode" -msgstr "" - -msgctxt "bugr_PREVIOUS_SERVER_MODE" -msgid "Previous server mode" -msgstr "" - -msgctxt "bugr_KERNEL_AND_ARCH" -msgid "Current running kernel version and architecture" -msgstr "" - -msgctxt "bugr_INSTALLED_RPMS" -msgid "A list of additional RPMs installed on your server" -msgstr "" - -msgctxt "bugr_ALTERED_TEMPLATES" -msgid "" -"A list of SME templates that have been altered on your server from a base " -"install" -msgstr "" - -msgctxt "bugr_ALTERED_EVENTS" -msgid "" -"A list of SME events that have been altered on your server from a base " -"install" -msgstr "" - -msgctxt "bugr_YUM_REPOS" -msgid "A list of additional software repositories configured on your server" -msgstr "" - -msgctxt "bugr_PRIVACY" -msgid "" -"No privacy related data (ie. users, passwords, IP addresses) will be " -"included in the report." -msgstr "" - -msgctxt "bugr_CREATE_REPORT" -msgid "Create configuration report" -msgstr "" - -msgctxt "bugr_DONATING" -msgid "Have you considered donating?" -msgstr "" - -msgctxt "bugr_AWARE_SME" -msgid "" -"You are probaly aware that SME server is developed and supported by a " -"collaborative community of volunteers from all over the world. While SME " -"server is free to download and use, maintaining the infrastructure behind " -"the project (eg. hosting the forums and wiki, providing repositories and " -"build servers etc.) costs real money in the real world." -msgstr "" - -msgctxt "bugr_YOUR_HELP" -msgid "" -"In very much the same way you need us to address your current issue, we need" -" YOUR help to keep this project alive!" -msgstr "" - -msgctxt "bugr_CONSIDER_DONATING" -msgid "" -"Please consider donating to the project by clicking on the image link below:" -msgstr "" - -msgctxt "bugr_THANK_YOU" -msgid "Thank you for your support!" -msgstr "" - -msgctxt "bugr_Download this report" -msgid "Download this report !" -msgstr "" - -msgctxt "Report a bug" -msgid "Report a bug" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Clamav/pofiles/clamav_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Clamav/pofiles/clamav_en.po deleted file mode 100644 index 5fc0826..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Clamav/pofiles/clamav_en.po +++ /dev/null @@ -1,46 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "clm_FORM_TITLE" -msgid "Antivirus settings" -msgstr "" - -msgctxt "clm_LABEL_FILESYSTEM_SCAN_PERIOD" -msgid "Scan filesystem" -msgstr "" - -msgctxt "clm_DESC_FILESYSTEM_SCAN_PERIOD" -msgid "" -"

General Settings

\n" -"If this option is enabled then the filesystem will be \n" -"scanned for viruses.A report of any found viruses will be\n" -"emailed to the administrator." -msgstr "" - -msgctxt "clm_LABEL_QUARANTINE" -msgid "Quarantine infected files" -msgstr "" - -msgctxt "clm_LABEL_CLAM_VERSIONS" -msgid "ClamAV and db versions" -msgstr "" - -msgctxt "clm_WEEKLY" -msgid "Weekly" -msgstr "" - -msgctxt "clm_NEVER" -msgid "Never" -msgstr "" - -msgctxt "clm_DAILY" -msgid "Daily" -msgstr "" - -msgctxt "clm_SUCCESS" -msgid "The new clamav antivirus settings have been saved." -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Datetime/pofiles/datetime_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Datetime/pofiles/datetime_en.po deleted file mode 100644 index 97fadb5..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Datetime/pofiles/datetime_en.po +++ /dev/null @@ -1,233 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'dat_FORM_TITLE'" -msgid "Date and time configuration" -msgstr "" - -msgctxt "dat_INITIAL_DESC" -msgid "" -"This is where you configure the date and time of this server. You may use an existing network time server or\n" -"manually set the date and time for your time zone." -msgstr "" - -msgctxt "dat_SET_DATE_TITLE" -msgid "Set Date and Time" -msgstr "" - -msgctxt "dat_COULD_NOT_OPEN_TZ_FILE" -msgid "Error: Could not open timezone file for reading:" -msgstr "" - -msgctxt "dat_JANUARY" -msgid "January" -msgstr "" - -msgctxt "dat_FEBRUARY" -msgid "February" -msgstr "" - -msgctxt "dat_MARCH" -msgid "March" -msgstr "" - -msgctxt "dat_APRIL" -msgid "April" -msgstr "" - -msgctxt "dat_MAY" -msgid "May" -msgstr "" - -msgctxt "dat_JUNE" -msgid "June" -msgstr "" - -msgctxt "dat_JULY" -msgid "July" -msgstr "" - -msgctxt "dat_AUGUST" -msgid "August" -msgstr "" - -msgctxt "dat_SEPTEMBER" -msgid "September" -msgstr "" - -msgctxt "dat_OCTOBER" -msgid "October" -msgstr "" - -msgctxt "dat_NOVEMBER" -msgid "November" -msgstr "" - -msgctxt "dat_DECEMBER" -msgid "December" -msgstr "" - -msgctxt "dat_NEW_M/D/Y" -msgid "New month/day/year:" -msgstr "" - -msgctxt "dat_NEW_H/M/S" -msgid "New hour/min/sec:" -msgstr "" - -msgctxt "dat_AM/PM_AND_TZ" -msgid "AM/PM and time zone:" -msgstr "" - -msgctxt "dat_NTP_ENABLE_DESC" -msgid "" -"The server can periodically synchronize the system clock to a network time " -"protocol (NTP) server. If you select this option, enter the hostname or IP " -"address of the NTP server below." -msgstr "" - -msgctxt "dat_NTP_CONFIGURE_DESC" -msgid "" -"The server is periodically synchronizing the system clock to the network " -"time protocol (NTP) server specified below. To synchronize to a different " -"NTP server, enter a different hostname or IP address in the field below." -msgstr "" - -msgctxt "dat_NTP_DISABLE_DESC" -msgid "" -"Choose this option to stop syncronizing the system clock to the NTP\n" -"server.When the NTP service is disabled, you can set the system date and time manually from this page." -msgstr "" - -msgctxt "dat_NTP_SERVER" -msgid "NTP Server" -msgstr "" - -msgctxt "dat_VERIFY_DATE_AND_TIME" -msgid "Verify date and time" -msgstr "" - -msgctxt "dat_NEW_DATE_AND_TIME" -msgid "New date and time setting:" -msgstr "" - -msgctxt "dat_SETTING_DATE_AND_TIME" -msgid "Setting date and time" -msgstr "" - -msgctxt "dat_INVALID_DAY" -msgid "Error: invalid day of month:" -msgstr "" - -msgctxt "dat_BETWEEN_1_AND_31" -msgid "Please choose a day between 1 and 31." -msgstr "" - -msgctxt "dat_INVALID_YEAR" -msgid "Error: invalid year:" -msgstr "" - -msgctxt "dat_FOUR_DIGIT_YEAR" -msgid "Please choose a four-digit year between 1900 and 2200." -msgstr "" - -msgctxt "dat_INVALID_HOUR" -msgid "Error: invalid hour:" -msgstr "" - -msgctxt "dat_BETWEEN_1_AND_12" -msgid "Please choose an hour between 1 and 12." -msgstr "" - -msgctxt "dat_INVALID_MINUTE" -msgid "Error: invalid minute:" -msgstr "" - -msgctxt "dat_BETWEEN_0_AND_59" -msgid "Please choose a minute between 0 and 59." -msgstr "" - -msgctxt "dat_INVALID_SECOND" -msgid "Error: invalid second" -msgstr "" - -msgctxt "dat_MONTH_BETWEEN_1_AND_12" -msgid "Please choose a month value between 1 and 12." -msgstr "" - -msgctxt "dat_INVALID_MONTH" -msgid "Error: invalid month" -msgstr "" - -msgctxt "dat_UPDATING_CLOCK" -msgid "" -"System clock is being updated. Please wait for a few seconds, \n" -"then click here\n" -"to verify changes." -msgstr "" - -msgctxt "dat_ERR_SETTING_CLOCK" -msgid "Error occurred while setting system time and hardware clock." -msgstr "" - -msgctxt "dat_SERVER_DISABLED" -msgid "Network time server disabled successfully" -msgstr "" - -msgctxt "dat_SERVER_DISABLED_DESC" -msgid "" -"You have disabled this service: The server will rely on its internal\n" -"clock, and will not try to synchronize from a time server." -msgstr "" - -msgctxt "dat_ERR_CHANGING_TS" -msgid "Error while changing network time server setting" -msgstr "" - -msgctxt "dat_INVALID_NTP_ADDR" -msgid "Invalid NTP server address:" -msgstr "" - -msgctxt "dat_SETTINGS_CHANGED" -msgid "Network time server setting changed successfully" -msgstr "" - -msgctxt "dat_SYNC_WITH" -msgid "" -"This server is now configured to synchronize periodically \n" -"(via the Internet) with:" -msgstr "" - -msgctxt "dat_INVALID_NTP_SERVER" -msgid "" -"Invalid NTP server, the server will not try to synchronize from a " -"time server." -msgstr "" - -msgctxt "dat_NETWORK_TIME_SERVER" -msgid "Network Time Server" -msgstr "" - -msgctxt "dat_NTP_CONFIGURE_TITLE" -msgid "Configure Network Time Server" -msgstr "" - -msgctxt "dat_NTP_ENABLE_TITLE" -msgid "Enable Network Time Server" -msgstr "" - -msgctxt "dat_NTP_DISABLE_TITLE" -msgid "Disable Network Time Server" -msgstr "" - -msgctxt "dat_CURRENT_SETTING" -msgid "Current setting" -msgstr "" - -msgctxt "Date and time" -msgid "Date and time" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Directory/pofiles/directory_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Directory/pofiles/directory_en.po deleted file mode 100644 index 9268084..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Directory/pofiles/directory_en.po +++ /dev/null @@ -1,88 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'dir_FORM_TITLE'" -msgid "Change LDAP directory settings" -msgstr "" - -msgctxt "dir_LABEL_ROOT" -msgid "Server root" -msgstr "" - -msgctxt "dir_DESCRIPTION" -msgid "" -"The LDAP server provides a network-available listing of the user accounts \n" -"and groups on your server, and can be accessed using an LDAP client such as the Address Book feature\n" -" in Netscape Communicator. Configure your LDAP client with the local IP address of your server, \n" -" port number 389, and the server root parameter shown below." -msgstr "" - -msgctxt "dir_DESC_DIRECTORY_ACCESS" -msgid "" -"You can control access to your LDAP directory: \n" -"the private setting allows access only from your local network, and the public setting allows access from anywhere on the Internet." -msgstr "" - -msgctxt "dir_DIRECTORY_ACCESS" -msgid "LDAP directory access" -msgstr "" - -msgctxt "dir_DESC_DEPARTMENT" -msgid "" -"These fields are the LDAP defaults for your organization.\n" -"Whenever you create a new user account, you will be prompted\n" -"to enter all of these fields (they can be different for each\n" -"user) but the values you set here\n" -"will show up as defaults. This is a convenience to make it\n" -"faster to create user accounts." -msgstr "" - -msgctxt "dir_DEPARTMENT" -msgid "Default department" -msgstr "" - -msgctxt "dir_COMPANY" -msgid "Default company" -msgstr "" - -msgctxt "dir_STREET" -msgid "Default Street address" -msgstr "" - -msgctxt "dir_CITY" -msgid "Default City" -msgstr "" - -msgctxt "dir_PHONENUMBER" -msgid "Default Phone Number" -msgstr "" - -msgctxt "dir_DESC_EXISTING" -msgid "" -"You can either leave existing user accounts as they are, using the above defaults only for\n" -"new users, or you can apply the above defaults to all existing users as well." -msgstr "" - -msgctxt "dir_EXISTING" -msgid "Existing users" -msgstr "" - -msgctxt "dir_SUCCESS" -msgid "The new LDAP default settings have been saved." -msgstr "" - -msgctxt "dir_LEAVE" -msgid "Leave as they are" -msgstr "" - -msgctxt "dir_UPDATE" -msgid "Update with new defaults" -msgstr "" - -msgctxt "Directory" -msgid "Directory" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Domains/pofiles/domains_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Domains/pofiles/domains_en.po deleted file mode 100644 index 561363f..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Domains/pofiles/domains_en.po +++ /dev/null @@ -1,180 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'dom_ADD_DOMAIN'" -msgid "Add domain" -msgstr "" - -msgctxt "dom_FORM_TITLE" -msgid "Manage domains" -msgstr "" - -msgctxt "dom_FORM_DESCRIPTION" -msgid "" -"When you create a domain, your server will be able to\n" -"receive e-mail for that domain and will also be able to host a\n" -"web site for that domain." -msgstr "" - -msgctxt "dom_ADD_DOMAIN" -msgid "Add domain" -msgstr "" - -msgctxt "dom_NO_VIRTUAL_DOMAINS" -msgid "There are no domains in the system" -msgstr "" - -msgctxt "dom_CURRENT_DOMAINS" -msgid "Current list of domains" -msgstr "" - -msgctxt "dom_PRIMARY_SITE" -msgid "primary site" -msgstr "" - -msgctxt "dom_CONTENT" -msgid "[_1] i-bay" -msgstr "" - -msgctxt "dom_CREATE_TITLE" -msgid "Create a new domain" -msgstr "" - -msgctxt "dom_CONTENT_FIELD_DESCRIPTION" -msgid "" -"For the web site, you may choose your primary web site or any\n" -"i-bay as the content." -msgstr "" - -msgctxt "dom_DOMAIN_NAME_VALIDATION_ERROR" -msgid "" -"Error: unexpected or missing characters in domain name\n" -"[_1].The domain name should contain one or more\n" -"letters, numbers, periods and minus signs.Did not create new domain." -msgstr "" - -msgctxt "dom_DOMAIN_DESCRIPTION_VALIDATION_ERROR" -msgid "" -"Error: unexpected or missing characters in domain description\n" -"[_1]. Did not create new domain." -msgstr "" - -msgctxt "dom_DOMAIN_IN_USE_ERROR" -msgid "" -"Error: domain [_1] is already in use.Did not create\n" -"new domain." -msgstr "" - -msgctxt "dom_SYSTEM_DOMAIN_ERROR" -msgid "" -"Error: domain [_1] is your system domain name.You\n" -"cannot have a domain with the same name.Did not create new domain." -msgstr "" - -msgctxt "dom_SUCCESSFULLY_CREATED" -msgid "" -"Successfully created domain [_1].Your web\n" -"server is now being restarted.The links on this page will be\n" -"inactive until the web server restart is complete." -msgstr "" - -msgctxt "dom_MODIFY_TITLE" -msgid "Modify domain" -msgstr "" - -msgctxt "dom_NONEXISTENT_DOMAIN_ERROR" -msgid "Error: [_1] is not an existing domain." -msgstr "" - -msgctxt "dom_SUCCESSFULLY_MODIFIED" -msgid "" -"Successfully modified domain [_1].Your web\n" -"server is now being restarted.The links on this page will be inactive until the web server restart is complete." -msgstr "" - -msgctxt "dom_REMOVE_TITLE" -msgid "Remove domain" -msgstr "" - -msgctxt "dom_REMOVE_DESCRIPTION" -msgid "You are about to remove the domain \"[_1]\" ([_2])." -msgstr "" - -msgctxt "dom_ABOUT_TO_REMOVE" -msgid "Are you sure you wish to remove this domain ?" -msgstr "" - -msgctxt "dom_ERROR_WHILE_REMOVING_DOMAIN" -msgid "Error: internal failure while removing domain [_1]." -msgstr "" - -msgctxt "dom_SUCCESSFULLY_DELETED" -msgid "" -"Successfully deleted domain [_1]. Your web server\n" -"is now being restarted.The links on this page will be inactive\n" -"until the web server restart is complete." -msgstr "" - -msgctxt "dom_DESC_CORPORATE_DNS_CURRENT" -msgid "Corporate DNS Settings" -msgstr "" - -msgctxt "dom_DOMAINS_PAGE_CORPORATE_DNS" -msgid "Modify corporate DNS settings" -msgstr "" - -msgctxt "dom_DESC_CORPORATE_DNS" -msgid "" -"If this server does not have access to the Internet, or\n" -"you have special requirements for DNS resolution, \n" -"enter the DNS server IP addresses here.\n" -"These fields should be left blank unless \n" -"you have a specific reason to configure other DNS servers.\n" -"You should not enter the address of your ISP\\'s DNS servers\n" -"here, as the server is capable of resolving all\n" -"Internet DNS names without this additional configuration." -msgstr "" - -msgctxt "dom_LABEL_CORPORATE_DNS_PRIMARY" -msgid "Primary corporate DNS server" -msgstr "" - -msgctxt "dom_LABEL_CORPORATE_DNS_SECONDARY" -msgid "Secondary corporate DNS server" -msgstr "" - -msgctxt "dom_DESC_NAMESERVERS" -msgid "" -"You can select whether this domain is resolved locally,\n" -"passed to the corporate DNS servers, or resolved by \n" -"the Internet DNS servers. The default will be correct \n" -"for most networks." -msgstr "" - -msgctxt "dom_LABEL_NAMESERVERS" -msgid "Domain DNS servers" -msgstr "" - -msgctxt "dom_localhost" -msgid "Resolve locally" -msgstr "" - -msgctxt "dom_internet" -msgid "Internet DNS servers" -msgstr "" - -msgctxt "dom_corporate" -msgid "Corporate DNS servers" -msgstr "" - -msgctxt "dom_REMOVE_DESC" -msgid "You are about to remove the domain" -msgstr "" - -msgctxt "dom_REMOVE_DESC2" -msgid "Are you sure you wish to remove this Domain ?" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Emailsettings/pofiles/emailsettings_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Emailsettings/pofiles/emailsettings_en.po deleted file mode 100644 index 626a1e8..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Emailsettings/pofiles/emailsettings_en.po +++ /dev/null @@ -1,459 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'mai_FORM_TITLE'" -msgid "E-mail settings" -msgstr "" - -msgctxt "E-mail" -msgid "E-mail" -msgstr "" - -msgctxt "mai_SUCCESS" -msgid "The new e-mail settings have been saved." -msgstr "" - -msgctxt "mai_NEVER" -msgid "not at all" -msgstr "" - -msgctxt "mai_EVERY5MIN" -msgid "Every 5 minutes" -msgstr "" - -msgctxt "mai_EVERY15MIN" -msgid "Every 15 minutes" -msgstr "" - -msgctxt "mai_EVERY30MIN" -msgid "Every 30 minutes" -msgstr "" - -msgctxt "mai_EVERYHOUR" -msgid "Every hour" -msgstr "" - -msgctxt "mai_EVERY2HRS" -msgid "Every 2 hours" -msgstr "" - -msgctxt "mai_STANDARD" -msgid "Standard (SMTP)" -msgstr "" - -msgctxt "mai_ETRN" -msgid "ETRN (SMTP with client request)" -msgstr "" - -msgctxt "mai_DEFAULT" -msgid "Default" -msgstr "" - -msgctxt "mai_SPECIFY_BELOW" -msgid "Specify below" -msgstr "" - -msgctxt "mai_MULTIDROP" -msgid "multi-drop" -msgstr "" - -msgctxt "mai_LABEL_MODE" -msgid "E-mail retrieval mode" -msgstr "" - -msgctxt "mai_DESC_MODE" -msgid "" -"The e-mail retrieval mode can be set to\n" -"standard (for dedicated Internet connections), ETRN (recommended\n" -"for dialup connections), or multi-drop (for dialup connections if\n" -"ETRN is not supported by your Internet provider). Note that\n" -"multi-drop mode is the only option available when the server is\n" -"configured in private server and gateway mode." -msgstr "" - -msgctxt "mai_LABEL_DELEGATE" -msgid "Address of internal mail server" -msgstr "" - -msgctxt "mai_TITLE_DELEGATE" -msgid "Delegate mail servers" -msgstr "" - -msgctxt "mai_DESC_DELEGATE" -msgid "" -"Your server includes a complete, full-featured e-mail server. However,\n" -"if for some reason you wish to delegate e-mail processing to\n" -"another system, specify the IP address of the delegate system\n" -"here. For normal operation, leave this field blank." -msgstr "" - -msgctxt "mai_LABEL_SECONDARY" -msgid "Secondary mail server" -msgstr "" - -msgctxt "mai_TITLE_SECONDARY" -msgid "ETRN or multi-drop settings" -msgstr "" - -msgctxt "mai_DESC_SECONDARY" -msgid "" -"For ETRN or multi-drop, specify the hostname or IP address of your\n" -"secondary mail server. (If using the standard e-mail setup, this\n" -"field can be left blank.)" -msgstr "" - -msgctxt "mai_DESC_FETCH_PERIOD" -msgid "" -"For ETRN or multi-drop, you can control how frequently this server\n" -"contacts your secondary e-mail server to fetch e-mail. More\n" -"frequent connections mean that you receive your e-mail more\n" -"quickly, but also cause Internet requests to be sent more often,\n" -"possibly increasing your phone and Internet charges." -msgstr "" - -msgctxt "mai_LABEL_FETCH_PERIOD" -msgid "During office hours (8:00 AM to 6:00 PM) on weekdays" -msgstr "" - -msgctxt "mai_LABEL_FETCH_PERIOD_NIGHTS" -msgid "Outside office hours (6:00 PM to 8:00 AM) on weekdays" -msgstr "" - -msgctxt "mai_LABEL_FETCH_PERIOD_WEEKENDS" -msgid "During the weekend" -msgstr "" - -msgctxt "mai_DESC_POP_ACCOUNT" -msgid "" -"For multi-drop e-mail, specify the POP user account and password.\n" -"(If using standard or ETRN e-mail, these fields can be blank.)\n" -"Also, for multi-drop, you can either use the default mail sorting\n" -"method, or you can specify a particular message header to use for\n" -"mail sorting." -msgstr "" - -msgctxt "mai_LABEL_POP_PASS" -msgid "POP user password (for multi-drop)" -msgstr "" - -msgctxt "mai_LABEL_POP_ACCOUNT" -msgid "POP user account (for multi-drop)" -msgstr "" - -msgctxt "mai_LABEL_SORT_METHOD" -msgid "Select sort method (for multi-drop)" -msgstr "" - -msgctxt "mai_LABEL_SORT_HEADER" -msgid "Select sort header (for multi-drop)" -msgstr "" - -msgctxt "mai_LABEL_FETCH_PROTO" -msgid "Protocol (for multi-drop)" -msgstr "" - -msgctxt "mai_LABEL_FETCH_SECURE" -msgid "Tunnel over SSL (for multi-drop)" -msgstr "" - -msgctxt "mai_AUTO" -msgid "Automatic" -msgstr "" - -msgctxt "mai_ENABLED_BOTH" -msgid "Allow both HTTP and HTTPS" -msgstr "" - -msgctxt "mai_ENABLED_SECURE_ONLY" -msgid "Allow HTTPS (secure)" -msgstr "" - -msgctxt "mai_ONLY_LOCAL_NETWORK_SSL" -msgid "Allow HTTPS (secure) from local networks" -msgstr "" - -msgctxt "mai_INSECURE_POP3" -msgid "Allow both POP3 and POP3S" -msgstr "" - -msgctxt "mai_ALLOW_PRIVATE" -msgid "Allow private" -msgstr "" - -msgctxt "mai_SECURE_POP3" -msgid "Allow private and public (secure POP3S)" -msgstr "" - -msgctxt "mai_INSECURE_IMAP" -msgid "Allow both IMAP and IMAPS" -msgstr "" - -msgctxt "mai_SECURE_IMAP" -msgid "Allow private and public (secure IMAPS)" -msgstr "" - -msgctxt "mai_INSECURE_SMTP" -msgid "Allow both SMTP and SSMTP" -msgstr "" - -msgctxt "mai_SECURE_SMTP" -msgid "Allow SSMTP (secure)" -msgstr "" - -msgctxt "mai_LABEL_POP_ACCESS_CONTROL" -msgid "POP3 server access" -msgstr "" - -msgctxt "mai_LABEL_IMAP_ACCESS_CONTROL" -msgid "IMAP server access" -msgstr "" - -msgctxt "mai_LABEL_SMTP_AUTH_CONTROL" -msgid "SMTP authentication" -msgstr "" - -msgctxt "mai_FORWARD_TO_ADMIN" -msgid "Send to administrator" -msgstr "" - -msgctxt "mai_FORWARD_TO" -msgid "Send to" -msgstr "" - -msgctxt "mai_RETURN_TO_SENDER" -msgid "Reject" -msgstr "" - -msgctxt "mai_LABEL_UNKNOWN" -msgid "E-mail to unknown users" -msgstr "" - -msgctxt "mai_TITLE_UNKNOWN" -msgid "Unknown Users" -msgstr "" - -msgctxt "mai_DESC_UNKNOWN" -msgid "" -"Selecting Reject (recommended setting) will configure the server to only\n" -"accept mail for valid email addresses (for example users, groups, pseudonyms).\n" -"Mail for other addresses will be rejected." -msgstr "" - -msgctxt "mai_LABEL_SMARTHOST" -msgid "Address of Internet provider\\'s mail server" -msgstr "" - -msgctxt "mai_TITLE_SMARTHOST" -msgid "SMTP server" -msgstr "" - -msgctxt "mai_DESC_SMARTHOST" -msgid "" -"The server can deliver outgoing messages directly to their\n" -"destination (recommended in most cases) or can deliver them via\n" -"your Internet provider\\'s SMTP server (recommended if you have an\n" -"unreliable Internet connection or are using a residential Internet\n" -"service). If using your Internet provider\\'s SMTP server, specify\n" -"its hostname or IP address below. Otherwise leave this field\n" -"blank." -msgstr "" - -msgctxt "mai_INVALID_SMARTHOST" -msgid "" -"The smarthost name you entered is not a valid internet domain name\n" -"and is not blank" -msgstr "" - -msgctxt "mai_DESC_POP_ACCESS_CONTROL" -msgid "" -"You can control POP3 server access. The setting \\'Allow access\n" -"only from local networks\\' allows POP3 access only from your\n" -"local network(s). The POP3S setting can be used to provide\n" -"encrypted external access to your POP3 server. We recommend\n" -"leaving this setting \\'Allow access only from local networks\\'\n" -"unless you have a specific reason to do otherwise." -msgstr "" - -msgctxt "mai_DESC_IMAP_ACCESS_CONTROL" -msgid "" -"You can control IMAP server access. The setting \\'Allow access\n" -"only from local networks\\' allows IMAP access only from your\n" -"local network(s). The IMAPS setting can be used to provide\n" -"encrypted external access to your IMAP server. We recommend\n" -"leaving this setting \\'Allow access only from local networks\\'\n" -"unless you have a specific reason to do otherwise." -msgstr "" - -msgctxt "mai_DESC_SMTP_AUTH_CONTROL" -msgid "" -"You can provide authenticated access to your SMTP server, or \n" -"set it to Disabled.\n" -"The SSMTP setting requires all users to use SSL/TLS \n" -"authentication. The SMTP and SSMTP option additionally allows \n" -"STARTTLS to be used to ensure secure authentication." -msgstr "" - -msgctxt "mai_DESC_WEBMAIL" -msgid "" -"You can enable or disable webmail on this system. Webmail allows\n" -"users to access their mail through a regular web browser by\n" -"pointing the browser to https://[_1]/webmail,and \n" -" logging in to their account." -msgstr "" - -msgctxt "mai_LABEL_WEBMAIL" -msgid "Webmail access" -msgstr "" - -msgctxt "mai_LABEL_BLOCK_EXECUTABLE_CONTENT" -msgid "Executable content blocking" -msgstr "" - -msgctxt "mai_LABEL_CONTENT_TO_BLOCK" -msgid "Content to block" -msgstr "" - -msgctxt "mai_DESC_BLOCK_EXECUTABLE_CONTENT" -msgid "" -"You can block executable content in e-mail attachments\n" -"by highlighting the executable attachment types you wish to\n" -"block. E-mail containing these attachment types will \n" -"be automatically returned to the sender." -msgstr "" - -msgctxt "mai_UNACCEPTABLE_CHARS" -msgid "" -"This field requires a valid e-mail address, which must include\n" -"the @ symbol and a domain name." -msgstr "" - -msgctxt "mai_DESC_STATE_ACCESS" -msgid "E-mail access" -msgstr "" - -msgctxt "mai_DESC_STATE_ACCESS_BUTTON" -msgid "Change e-mail access settings" -msgstr "" - -msgctxt "mai_DESC_STATE_RECEPTION" -msgid "E-mail reception" -msgstr "" - -msgctxt "mai_DESC_STATE_RECEPTION_BUTTON" -msgid "Change e-mail reception settings" -msgstr "" - -msgctxt "mai_DESC_STATE_DELIVERY" -msgid "E-mail delivery" -msgstr "" - -msgctxt "mai_DESC_STATE_DELIVERY_BUTTON" -msgid "Change e-mail delivery settings" -msgstr "" - -msgctxt "mai_DESC_STATE_FILTERING_BUTTON" -msgid "Change e-mail filtering settings" -msgstr "" - -msgctxt "mai_LABEL_VIRUS_SCAN" -msgid "Virus scanning" -msgstr "" - -msgctxt "mai_DESC_VIRUS_SCAN" -msgid "" -"You can scan incoming and outgoing e-mail for viruses. If scanning is enabled and a virus is detected, the e-mail will be rejected and returned to the\n" -"sender." -msgstr "" - -msgctxt "mai_LABEL_SPAM_SCAN" -msgid "Spam filtering" -msgstr "" - -msgctxt "mai_DESC_SPAM_SCAN" -msgid "" -"You can scan e-mail for spam. If Spam filtering is\n" -"enabled, an X-Spam-Status: header is added to each\n" -"message, which can be used for filtering spam.\n" -"You can adjust the sensitivity of the Spam detection\n" -"process from the default of medium. For fine-grained\n" -"control, you can set the Spam sensitivity to Custom\n" -"and then choose a custom tagging level, and \n" -"optionally a level at which to reject the message." -msgstr "" - -msgctxt "mai_LABEL_SPAM_SUBJECT" -msgid "SPAM subject prefix" -msgstr "" - -msgctxt "mai_DESC_SPAM_SUBJECT" -msgid "" -"You can enable to add a tag to the subject of each\n" -"message that is classified as SPAM.\n" -"The value for this tag can be defined below." -msgstr "" - -msgctxt "mai_LABEL_SPAM_SENSITIVITY" -msgid "Spam sensitivity" -msgstr "" - -msgctxt "mai_LABEL_SPAM_TAGLEVEL" -msgid "Custom spam tagging level" -msgstr "" - -msgctxt "mai_LABEL_SPAM_REJECTLEVEL" -msgid "Custom spam rejection level" -msgstr "" - -msgctxt "mai_LABEL_SPAM_SUBJECTTAG" -msgid "Modify subject of spam messages" -msgstr "" - -msgctxt "mai_LABEL_SORTSPAM" -msgid "Sort spam into junkmail folder" -msgstr "" - -msgctxt "mai_VERYHIGH" -msgid "Very high" -msgstr "" - -msgctxt "mai_HIGH" -msgid "High" -msgstr "" - -msgctxt "mai_MEDIUM" -msgid "Medium" -msgstr "" - -msgctxt "mai_LOW" -msgid "Low" -msgstr "" - -msgctxt "mai_VERYLOW" -msgid "Very low" -msgstr "" - -msgctxt "mai_CUSTOM" -msgid "Custom" -msgstr "" - -msgctxt "mai_LABEL_SMARTHOST_SMTPAUTH_STATUS" -msgid "SMTP Authentication for Internet provider" -msgstr "" - -msgctxt "mai_LABEL_SMARTHOST_SMTPAUTH_USERID" -msgid "Mail server user id" -msgstr "" - -msgctxt "mai_LABEL_SMARTHOST_SMTPAUTH_PASSWD" -msgid "Mail server password" -msgstr "" - -msgctxt "mai_VALIDATION_SMTPAUTH_NONBLANK" -msgid "" -"This field cannot be left blank if SMTP Authentication is\n" -"enabled." -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/General/pofiles/general_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/General/pofiles/general_en.po deleted file mode 100644 index b2456ad..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/General/pofiles/general_en.po +++ /dev/null @@ -1,629 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "edit" -msgid "edit" -msgstr "" - -msgctxt "del" -msgid "del" -msgstr "" - -msgctxt "exit" -msgid "Exit" -msgstr "" - -msgctxt "cancel" -msgid "Cancel" -msgstr "" - -msgctxt "hello" -msgid "hello" -msgstr "" - -msgctxt "All rights reserved" -msgid "All Rights Reserved" -msgstr "" - -msgctxt "Collaboration" -msgid "Collaboration" -msgstr "" - -msgctxt "Administration" -msgid "Administration" -msgstr "" - -msgctxt "Security" -msgid "Security" -msgstr "" - -msgctxt "Configuration" -msgid "Configuration" -msgstr "" - -msgctxt "Miscellaneous" -msgid "Miscellaneous" -msgstr "" - -msgctxt "Your Settings" -msgid "Your Settings" -msgstr "" - -msgctxt "SAVE" -msgid "Save" -msgstr "" - -msgctxt "CANCEL" -msgid "Cancel" -msgstr "" - -msgctxt "ENABLED" -msgid "Enabled" -msgstr "" - -msgctxt "DISABLED" -msgid "Disabled" -msgstr "" - -msgctxt "NO" -msgid "No" -msgstr "" - -msgctxt "YES" -msgid "Yes" -msgstr "" - -msgctxt "ADD" -msgid "Add" -msgstr "" - -msgctxt "CREATE" -msgid "Create" -msgstr "" - -msgctxt "MODIFY" -msgid "Modify" -msgstr "" - -msgctxt "REMOVE" -msgid "Remove" -msgstr "" - -msgctxt "COMMENT" -msgid "Comment" -msgstr "" - -msgctxt "NEXT" -msgid "Next" -msgstr "" - -msgctxt "SELF" -msgid "Self" -msgstr "" - -msgctxt "REMOTE" -msgid "Remote" -msgstr "" - -msgctxt "LOCAL" -msgid "Local" -msgstr "" - -msgctxt "ACTION" -msgid "Action" -msgstr "" - -msgctxt "NETWORK" -msgid "Network" -msgstr "" - -msgctxt "ROUTER" -msgid "Router" -msgstr "" - -msgctxt "OPERATION_STATUS_REPORT" -msgid "Operation status report" -msgstr "" - -msgctxt "ACCOUNT" -msgid "Account" -msgstr "" - -msgctxt "GROUP" -msgid "Group" -msgstr "" - -msgctxt "DESC_SECTIONBAR" -msgid "
" -msgstr "" - -msgctxt "NO_PIPES_ALLOWED" -msgid "Pipe symbols (|) are not permitted in this field" -msgstr "" - -msgctxt "ERROR_BELOW" -msgid "" -"ERROR: There was an error in the validation of this page. Please scroll down" -" and find the specific problem." -msgstr "" - -msgctxt "ACCESS" -msgid "Access" -msgstr "" - -msgctxt "ACCOUNT_LOCKED" -msgid "Account is locked" -msgstr "" - -msgctxt "GROUP_ADD" -msgid "Add group" -msgstr "" - -msgctxt "NETWORKS_ALLOW_LOCAL" -msgid "Allow access only from local networks" -msgstr "" - -msgctxt "NETWORKS_ALLOW_PUBLIC" -msgid "Allow public access (entire Internet)" -msgstr "" - -msgctxt "ERROR_PASSWORD_CHANGE" -msgid "" -"An error occurred while attempting to change your password. Please make sure" -" that the old password entered is correct." -msgstr "" - -msgctxt "BACK" -msgid "Back" -msgstr "" - -msgctxt "BACKUP" -msgid "Backup" -msgstr "" - -msgctxt "DESCRIPTION_BRIEF" -msgid "Brief description" -msgstr "" - -msgctxt "PASSWORD_CHANGE" -msgid "Change Password" -msgstr "" - -msgctxt "RESET_PASSWORD_TITLE" -msgid "Reset user password" -msgstr "" - -msgctxt "ACCOUNT_PASSWORD_CHANGE" -msgid "Change account password" -msgstr "" - -msgctxt "CONTENT" -msgid "Content" -msgstr "" - -msgctxt "CREATE_GROUP" -msgid "Create user group" -msgstr "" - -msgctxt "USER_LIST_CURRENT" -msgid "Current list of users" -msgstr "" - -msgctxt "DESCRIPTION" -msgid "Description" -msgstr "" - -msgctxt "DESTINATION" -msgid "Destination" -msgstr "" - -msgctxt "DOMAIN_NAME" -msgid "Domain name" -msgstr "" - -msgctxt "DOMAIN" -msgid "Domain" -msgstr "" - -msgctxt "DOMAINS" -msgid "Domains" -msgstr "" - -msgctxt "DOWNLOAD" -msgid "Download" -msgstr "" - -msgctxt "ERROR_UPDATING_CONFIGURATION" -msgid "Error occurred while updating system configuration." -msgstr "" - -msgctxt "GROUP_MEMBERS" -msgid "Group Members" -msgstr "" - -msgctxt "GROUP_NAME" -msgid "Group Name" -msgstr "" - -msgctxt "GROUPS" -msgid "Groups" -msgstr "" - -msgctxt "IP_ADDRESS" -msgid "IP Address" -msgstr "" - -msgctxt "IP_ADDRESS_OR_FQDN" -msgid "IP Address or FQDN" -msgstr "" - -msgctxt "USER_INVALID" -msgid "Invalid user" -msgstr "" - -msgctxt "LOCATION" -msgid "Location" -msgstr "" - -msgctxt "MB" -msgid "Mb" -msgstr "" - -msgctxt "MODIFY_USER_GROUP" -msgid "Modify user group" -msgstr "" - -msgctxt "NAME" -msgid "Name" -msgstr "" - -msgctxt "PASSWORD_VERIFY_NEW" -msgid "New password (verify):" -msgstr "" - -msgctxt "PASSWORD_NEW" -msgid "New password:" -msgstr "" - -msgctxt "OFF" -msgid "Off" -msgstr "" - -msgctxt "OK" -msgid "Ok" -msgstr "" - -msgctxt "PASSWORD_OLD" -msgid "Old password:" -msgstr "" - -msgctxt "ON" -msgid "On" -msgstr "" - -msgctxt "PASSWORD" -msgid "Password" -msgstr "" - -msgctxt "PERFORM" -msgid "Perform" -msgstr "" - -msgctxt "RECONFIGURE" -msgid "Reconfigure" -msgstr "" - -msgctxt "REMOVE_USER_GROUP" -msgid "Remove user group" -msgstr "" - -msgctxt "PASSWORD_RESET" -msgid "Reset password" -msgstr "" - -msgctxt "RESTORE" -msgid "Restore" -msgstr "" - -msgctxt "SHUTDOWN" -msgid "Shutdown" -msgstr "" - -msgctxt "SUCCESS" -msgid "Success" -msgstr "" - -msgctxt "ACCOUNT_NAME_INVALID" -msgid "The account name entered is invalid." -msgstr "" - -msgctxt "ACCOUNT_NAME_INVALID_CHARS" -msgid "The account name you entered contained invalid characters." -msgstr "" - -msgctxt "PASSWORD_OLD_INVALID_CHARS" -msgid "The old password you entered contained invalid characters." -msgstr "" - -msgctxt "PASSWORD_INVALID_CHARS" -msgid "The password you entered contained invalid characters." -msgstr "" - -msgctxt "PASSWORD_VERIFY_ERROR" -msgid "The passwords you entered did not match." -msgstr "" - -msgctxt "ACCOUNT_USER_NONE" -msgid "There are no user accounts in the system." -msgstr "" - -msgctxt "ACCOUNT_GROUP_NONE" -msgid "There are no user groups in the system." -msgstr "" - -msgctxt "ERROR_INVALID_CHARS" -msgid "Unexpected characters in description." -msgstr "" - -msgctxt "USER_NAME" -msgid "User Name" -msgstr "" - -msgctxt "YOUR_ACCOUNT" -msgid "Your account:" -msgstr "" - -msgctxt "YOUR_ACCOUNT_INVALID" -msgid "The account name entered is invalid." -msgstr "" - -msgctxt "PASSWORD_CHANGE_SUCCESS" -msgid "Your password has been successfully changed." -msgstr "" - -msgctxt "FM_NONBLANK" -msgid "This field must not be left blank" -msgstr "" - -msgctxt "FM_INTEGER" -msgid "This field must contain a positive integer" -msgstr "" - -msgctxt "FM_NUMBER" -msgid "This field must contain a number" -msgstr "" - -msgctxt "FM_WORD" -msgid "This field must look like a single word." -msgstr "" - -msgctxt "FM_DATE" -msgid "The data entered could not be parsed as a date" -msgstr "" - -msgctxt "FM_CREDIT_CARD_NUMBER1" -msgid "You must enter a credit card number" -msgstr "" - -msgctxt "FM_CREDIT_CARD_NUMBER2" -msgid "" -"Credit card numbers shouldn\\'t have anything but numbers, spaces or dashes" -msgstr "" - -msgctxt "FM_CREDIT_CARD_NUMBER3" -msgid "Must be at least 14 characters in length" -msgstr "" - -msgctxt "FM_CREDIT_CARD_NUMBER4" -msgid "Doesn\\'t appear to be a valid credit card number" -msgstr "" - -msgctxt "FM_CREDIT_CARD_EXPIRY1" -msgid "No expiry date entered." -msgstr "" - -msgctxt "FM_CREDIT_CARD_EXPIRY2" -msgid "Expiry date must be in the format MM/YY or MM/YYYY" -msgstr "" - -msgctxt "FM_CREDIT_CARD_EXPIRY3" -msgid "This expiry date appears to have already passed" -msgstr "" - -msgctxt "FM_CREDIT_CARD_EXPIRY4" -msgid "This expiry date appears to be too far in the future" -msgstr "" - -msgctxt "FM_ISO_COUNTRY_CODE1" -msgid "You must provide a country code" -msgstr "" - -msgctxt "FM_ISO_COUNTRY_CODE2" -msgid "This field does not contain an ISO country code" -msgstr "" - -msgctxt "FM_US_STATE" -msgid "This doesn\\'t appear to be a valid 2-letter US state abbreviation" -msgstr "" - -msgctxt "FM_US_ZIPCODE" -msgid "US zip codes must contain 5 or 9 numbers" -msgstr "" - -msgctxt "FM_MINLENGTH1" -msgid "Minimum length has been specified meaninglessly as [_1]" -msgstr "" - -msgctxt "FM_MINLENGTH2" -msgid "This field must be at least [_1] characters" -msgstr "" - -msgctxt "FM_MAXLENGTH1" -msgid "Maximum length has been specified meaninglessly as [_1]" -msgstr "" - -msgctxt "FM_MAXLENGTH2" -msgid "This field must be no more than [_1] characters" -msgstr "" - -msgctxt "FM_EXACTLENGTH1" -msgid "You must specify the length for the field." -msgstr "" - -msgctxt "FM_EXACTLENGTH2" -msgid "You must specify the exactlength of the field with an integer" -msgstr "" - -msgctxt "FM_EXACTLENGTH3" -msgid "This field must be exactly [_1] characters" -msgstr "" - -msgctxt "FM_LENGTHRANGE1" -msgid "You must specify the maximum and minimum length for the field." -msgstr "" - -msgctxt "FM_LENGTHRANGE2" -msgid "" -"You must specify the maximum and minimum lengths of the field with an " -"integer" -msgstr "" - -msgctxt "FM_LENGTHRANGE3" -msgid "This field must be between [_1] and [_2] characters" -msgstr "" - -msgctxt "FM_URL" -msgid "This field must contain a URL starting with http:// or ftp://" -msgstr "" - -msgctxt "FM_EMAIL_SIMPLE1" -msgid "You must enter an email address." -msgstr "" - -msgctxt "FM_EMAIL_SIMPLE2" -msgid "This field doesn\\'t look like an RFC822-compliant email address" -msgstr "" - -msgctxt "FM_DOMAIN_NAME" -msgid "This field doesn\\'t look like a valid Internet domain name or hostname." -msgstr "" - -msgctxt "FM_IP_NUMBER1" -msgid "This field must contain a valid IP number and can not be left blank." -msgstr "" - -msgctxt "FM_IP_NUMBER2" -msgid "Invalid IP address format (expected X.X.X.X)" -msgstr "" - -msgctxt "FM_IP_NUMBER3" -msgid "[_1] is more than 255" -msgstr "" - -msgctxt "FM_USERNAME" -msgid "" -"This field must look like a valid username (3 to 8 letters and numbers)" -msgstr "" - -msgctxt "FM_PASSWORD1" -msgid "You must provide a password." -msgstr "" - -msgctxt "FM_PASSWORD2" -msgid "" -"The password you provided was not a good password.A good password must " -"contain all of the following: upper case letter, lower case letter, number, " -"non-alphanumeric character, be at least 7 characters long." -msgstr "" - -msgctxt "FM_MAC_ADDRESS1" -msgid "You must provide a MAC address." -msgstr "" - -msgctxt "FM_MAC_ADDRESS2" -msgid "The MAC address you provided was not valid." -msgstr "" - -msgctxt "FM_ERR_UNEXPECTED_DESC" -msgid "Error: unexpected or missing characters in description" -msgstr "" - -msgctxt "swt_THEME" -msgid "Theme" -msgstr "" - -msgctxt "swt_LOGIN_AGAIN" -msgid "You may need to login again to see the choosed theme" -msgstr "" - -msgctxt "acs_NO" -msgid "Not Authorized" -msgstr "" - -msgctxt "acs_LOGIN" -msgid "Login required" -msgstr "" - -msgctxt "acs_ADMIN" -msgid "Admin rights required" -msgstr "" - -msgctxt "User password" -msgid "User password" -msgstr "" - -msgctxt "Logout" -msgid "Logout" -msgstr "" - -msgctxt "Home" -msgid "Home" -msgstr "" - -msgctxt "CSRF_VALIDATION_FAILURE" -msgid "Error: CSRF token is invalid or outdated." -msgstr "" - -msgctxt "Empty" -msgid "Empty" -msgstr "" - -msgctxt "Active" -msgid "Active" -msgstr "" - -msgctxt "MINUTE" -msgid "Minute" -msgstr "" - -msgctxt "MINUTES" -msgid "Minutes" -msgstr "" - -msgctxt "HOUR" -msgid "Hour" -msgstr "" - -msgctxt "HOURS" -msgid "Hours" -msgstr "" - -msgctxt "SMALL" -msgid "Small" -msgstr "" - -msgctxt "MEDIUM" -msgid "Medium" -msgstr "" - -msgctxt "LARGE" -msgid "Large" -msgstr "" - -msgctxt "FIELD_INVALID_CHARS" -msgid "A field you entered contains invalid characters." -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Groups/pofiles/groups_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Groups/pofiles/groups_en.po deleted file mode 100644 index f15ed4e..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Groups/pofiles/groups_en.po +++ /dev/null @@ -1,100 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'grp_FORM_TITLE'" -msgid "Create, modify, or remove user groups" -msgstr "" - -msgctxt "grp_GROUP_TOO_LONG" -msgid "Error: group name is too long. The maximum is [_1] characters." -msgstr "" - -msgctxt "grp_ACCOUNT_CONFLICT" -msgid "" -"Error: the group \"[_1]\" can\\'t be created because there is\n" -"already a [_2] account of that name." -msgstr "" - -msgctxt "grp_INVALID_GROUP_DESCRIPTION" -msgid "Error: unexpected or missing characters in group description" -msgstr "" - -msgctxt "grp_NO_MEMBERS" -msgid "Error: no members in group.Did not create new group." -msgstr "" - -msgctxt "grp_CREATED_GROUP" -msgid "Successfully created user group" -msgstr "" - -msgctxt "grp_DELETED_GROUP" -msgid "Successfully removed user group" -msgstr "" - -msgctxt "grp_MODIFIED_GROUP" -msgid "Successfully modifed user group" -msgstr "" - -msgctxt "grp_CREATE_ERROR" -msgid "An error occurred while creating user group." -msgstr "" - -msgctxt "grp_DELETE_ERROR" -msgid "An error occurred while removing user group." -msgstr "" - -msgctxt "grp_MODIFY_ERROR" -msgid "An error occurred while modifying user group." -msgstr "" - -msgctxt "grp_GROUP_NAMING" -msgid "" -"The group name should contain only lower-case\n" -"letters, numbers, hyphens, periods, and underscores, \n" -"and should start with a lower-case letter. For \n" -"example \"sales\", \"beta5\", and \"reseller_partners\" are\n" -"all valid group names, but \"3rd-event\", \"Marketing Team\"\n" -"and \"lost&found\" are not." -msgstr "" - -msgctxt "grp_GROUP_HAS_MEMBERS" -msgid "This group contains the following members:" -msgstr "" - -msgctxt "grp_NOT_A_GROUP" -msgid "Error: That is not an existing group account." -msgstr "" - -msgctxt "grp_GROUP_DESC" -msgid "Brief Description/Windows Group Alias" -msgstr "" - -msgctxt "grp_GROUP_DESC_EXPL" -msgid "" -"Input a brief group description in the field below.\n" -" This field also designates the group name viewable by \n" -" Windows clients." -msgstr "" - -msgctxt "grp_IBAYS_WILL_BE_CHANGED" -msgid "" -"The following information bays were assigned to this group and\n" -"will be changed to the Administrator group (you can change them to\n" -"something else afterward):" -msgstr "" - -msgctxt "grp_CONFIRM_DELETE_GROUP" -msgid "Are you sure you wish to remove this group?" -msgstr "" - -msgctxt "grp_CURRENT_LIST" -msgid "Current list of User Groups" -msgstr "" - -msgctxt "grp_DELETE_DESCRIPTION" -msgid "You are about to remove the user group \"[_1].\"" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Hostentries/pofiles/hostentries_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Hostentries/pofiles/hostentries_en.po deleted file mode 100644 index 578aaa3..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Hostentries/pofiles/hostentries_en.po +++ /dev/null @@ -1,233 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'hos_FORM_TITLE'" -msgid "Hostnames and addresses" -msgstr "" - -msgctxt "hos_UNABLE_TO_OPEN_CONFIGDB" -msgid "Unable to open configuration database" -msgstr "" - -msgctxt "hos_DNS_FORWARDER_ENABLED" -msgid "" -"A DNS forwarder has been configured. This means that all DNS\n" -"lookups will be handled by the DNS forwarder. Hostnames \n" -"and addresses cannot be modified on this server while\n" -"a DNS forwarder is configured." -msgstr "" - -msgctxt "hos_ADD_HOSTNAME" -msgid "Add hostname" -msgstr "" - -msgctxt "hos_HOSTNAME" -msgid "Hostname" -msgstr "" - -msgctxt "hos_HOSTTYPE" -msgid "Location" -msgstr "" - -msgctxt "hos_LOCAL_IP" -msgid "Local IP" -msgstr "" - -msgctxt "hos_ETHERNET_ADDRESS" -msgid "Ethernet address" -msgstr "" - -msgctxt "hos_CURRENT_HOSTNAMES_FOR_DOMAIN" -msgid "Current list of hostnames for [_1]." -msgstr "" - -msgctxt "hos_NO_HOSTNAMES_FOR_SERVICENAME" -msgid "There are no hostnames in the system for [_1]." -msgstr "" - -msgctxt "hos_CURRENT_HOSTNAMES_FOR_LOCAL_DOMAIN" -msgid "Current list of hostnames for [_1]" -msgstr "" - -msgctxt "hos_NO_HOSTNAMES_FOR_LOCAL_DOMAIN" -msgid "There are no hostnames in the system for [_1]." -msgstr "" - -msgctxt "hos_STATIC_HOST_MESSAGE" -msgid "" -"- This host represents your system name and cannot be modifiedor removed." -msgstr "" - -msgctxt "hos_CREATE_LOCAL_HOST_TITLE" -msgid "Create a new hostname referring to a local host." -msgstr "" - -msgctxt "hos_HOSTNAME_VALIDATION_ERROR" -msgid "" -"Error: unexpected characters in host name: \"[_1]\". \n" -"The host name should contain only \n" -"letters, numbers, and hyphens and must start \n" -"with a letter or a number." -msgstr "" - -msgctxt "hos_HOSTNAME_LENGTH_ERROR" -msgid "" -"Error: account name [_1] is too long. The\n" -"maximum is 32 characters." -msgstr "" - -msgctxt "hos_DOMAIN_VALIDATION_ERROR" -msgid "" -"Error: unexpected or missing characters in domain name \n" -"[_1]. The domain name should contain one or more \n" -"letters, numbers, periods and minus signs. Did not create new \n" -"domain." -msgstr "" - -msgctxt "hos_HOSTNAME_EXISTS_ERROR" -msgid "Error: account [_1] hostname." -msgstr "" - -msgctxt "hos_SUCCESSFULLY_CREATED" -msgid "Successfully created hostname." -msgstr "" - -msgctxt "hos_HOSTNAME_DESCRIPTION" -msgid "" -"The hostname must contain only letters, numbers, and hyphens, and must start" -" with a letter or number." -msgstr "" - -msgctxt "hos_LOCAL_IP_DESCRIPTION" -msgid "" -"The Local IP address is the IP address of another machine on\n" -"the local network. Please enter a valid IP address in the\n" -"format \"aaa.bbb.ccc.ddd\"." -msgstr "" - -msgctxt "hos_ETHERNET_ADDRESS_DESCRIPTION" -msgid "" -"The ethernet address is optional and causes the DHCP server to\n" -"statically bind the local IP address to the computer with this\n" -"ethernet address.If specified, it must be of the form\n" -"\"AA:BB:CC:DD:EE:FF\" and must contain only the numbers 0-9 and\n" -"the letters A-F." -msgstr "" - -msgctxt "hos_DIDNT_ENTER_LOCAL_IP" -msgid "" -"Error: You did not specify a Local IP address.IP\n" -"addresses must contain only numbers and periods and\n" -"be in the form \"aaa.bbb.ccc.ddd\".Did not create hostname." -msgstr "" - -msgctxt "hos_IP_VALIDATION_ERROR" -msgid "" -"Error: IP Address [_1] is\n" -"invalid. IP Addresses must contain only numbers and periodsand be in the form \"aaa.bbb.ccc.ddd\". Did not create hostname." -msgstr "" - -msgctxt "hos_MAC_ADDRESS_VALIDATION_ERROR" -msgid "" -"Error: Ethernet address [_1]\n" -"is invalid.Ethernet addresses must be in the\n" -"form \"AA:BB:CC:DD:EE:FF\" and only contain the\n" -"numbers 0-9 and the letters A-F. Did not create\n" -"hostname." -msgstr "" - -msgctxt "hos_CREATE_REMOTE_HOST_TITLE" -msgid "Create a new hostname referring to a remote host" -msgstr "" - -msgctxt "hos_CREATE_TITLE" -msgid "Create or modify hostname" -msgstr "" - -msgctxt "hos_MODIFY_TITLE" -msgid "Modify hostname" -msgstr "" - -msgctxt "hos_LOCAL_PAGE_DESCRIPTION" -msgid "Please enter the following additional details for a localhost:" -msgstr "" - -msgctxt "hos_REMOTE_PAGE_DESCRIPTION" -msgid "Please enter the following additional details for a remotehost:" -msgstr "" - -msgctxt "hos_SUCCESSFULLY_DELETED" -msgid "Successfully deleted host." -msgstr "" - -msgctxt "hos_SUCCESSFULLY_MODIFIED" -msgid "Successfully modified host." -msgstr "" - -msgctxt "hos_REMOVE_TITLE" -msgid "Remove hostname" -msgstr "" - -msgctxt "hos_REMOVE_PAGE_DESCRIPTION" -msgid "You are about to remove the hostname \"[_1]\"" -msgstr "" - -msgctxt "hos_ABOUT_TO_REMOVE" -msgid "Are you sure you wish to remove this hostname?" -msgstr "" - -msgctxt "hos_CONFIRM_DESCRIPTION" -msgid "Please confirm the following details." -msgstr "" - -msgctxt "hos_NO_HOSTS_FOR_THIS_DOMAIN" -msgid "There are no hosts for this domain." -msgstr "" - -msgctxt "hos_ADDR_IN_DHCP_RANGE" -msgid "Address is inside the DHCP assigned dynamic range" -msgstr "" - -msgctxt "hos_ERROR_WHILE_CREATING_HOST" -msgid "Error occurred while creating hostname." -msgstr "" - -msgctxt "hos_ERROR_WHILE_MODIFYING_HOST" -msgid "Error occurred while modifying hostname." -msgstr "" - -msgctxt "hos_ERROR_WHILE_DELETING_HOST" -msgid "Error occurred while deleting hostname." -msgstr "" - -msgctxt "hos_ERR_IP_IS_LOCAL_OR_GATEWAY" -msgid "Error: IP cannot be server IP or Gateway IP." -msgstr "" - -msgctxt "hos_ERR_IP_NOT_LOCAL" -msgid "Error: This IP address is not on any of our local networks." -msgstr "" - -msgctxt "hos_MUST_BE_VALID_HOSTNAME_OR_IP" -msgid "Must be a valid hostname or IP number" -msgstr "" - -msgctxt "hos_HOSTNAME_COMMENT_ERROR" -msgid "" -"Error: unexpected characters in the comment of \"[_1]\". \n" -"The comment must contain only letters, spaces, numbers, dots, commas, undescores, hyphens and must start with a letter or number." -msgstr "" - -msgctxt "hos_HOSTNAME_VALIDATOR_ERROR" -msgid "" -"Error: unexpected characters in host name: \"[_1]\". The host name should contain only \n" -"letters, numbers, and hyphens and must start with a letter or a number." -msgstr "" - -msgctxt "Hostnames and addresses" -msgid "Hostnames and addresses" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Ibays/pofiles/ibays_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Ibays/pofiles/ibays_en.po deleted file mode 100644 index c964806..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Ibays/pofiles/ibays_en.po +++ /dev/null @@ -1,217 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'iba_FORM_TITLE'" -msgid "Create, modify, or remove i-bays" -msgstr "" - -msgctxt "iba_ADD_IBAY" -msgid "Add ibay" -msgstr "" - -msgctxt "iba_FIRSTPAGE_DESC" -msgid "" -"You can remove any information bay or reset its password by\n" -"clicking on the corresponding command\n" -"next to the information bay. If the information bay shows up\n" -"in red, that means that the password has not\n" -"yet been changed from the default, and should be changed\n" -"soon." -msgstr "" - -msgctxt "iba_ADD_TITLE" -msgid "Create or modify an i-bay" -msgstr "" - -msgctxt "iba_NAME_FIELD_DESC" -msgid "" -"The information bay name should contain only lower-case\n" -"letters, numbers, periods, hyphens and underscores, and\n" -"should start with a lower-case letter. For example\n" -"\"johnson\", \"intra\", and \"cust3.prj12\" are all valid\n" -"names, but \"3associates\", \"John Smith\" and\n" -"\"Bus!Partner\" are not. The name is limited to [_1] characters." -msgstr "" - -msgctxt "iba_NAME_LABEL" -msgid "Information bay name" -msgstr "" - -msgctxt "iba_USER_ACCESS" -msgid "User access via file sharing or user ftp" -msgstr "" - -msgctxt "iba_PUBLIC_ACCESS" -msgid "Public access via web or anonymous ftp" -msgstr "" - -msgctxt "iba_PUBLIC_ACCESS_DESCRIPTION" -msgid "" -"The public access mode \"password required outside local\n" -"network\" is not supported by the FTP server component. If\n" -"you select this mode, the FTP server will require a\n" -"password both inside and outside the local network for this\n" -"i-bay." -msgstr "" - -msgctxt "iba_ALLOW_DYNAMIC_CONTENT" -msgid "Execution of dynamic content (CGI, PHP, SSI)" -msgstr "" - -msgctxt "iba_HTTPS_Only" -msgid "Force secure connections" -msgstr "" - -msgctxt "iba_REMOVE_TITLE" -msgid "Remove information bay" -msgstr "" - -msgctxt "iba_REMOVE_DESC" -msgid "" -"

You are about to remove the information bay [_1] ([_2]).\n" -"

All files belonging to this information bay will be deleted.\n" -"

Are you sure you wish to remove this information bay?\n" -"

" -msgstr "" - -msgctxt "iba_ERROR_WHILE_CREATING_IBAY" -msgid "An error occurred while creating the i-bay." -msgstr "" - -msgctxt "iba_SUCCESSFULLY_CREATED_IBAY" -msgid "Successfully created i-bay." -msgstr "" - -msgctxt "iba_NO_IBAYS" -msgid "There are no i-bays currently configured." -msgstr "" - -msgctxt "iba_CANT_FIND_IBAY" -msgid "Can\\'t find account for [_1] (does it exist?)" -msgstr "" - -msgctxt "iba_CANT_CREATE_IBAY" -msgid "Can\\'t create new account for [_1] (does it already exist?)" -msgstr "" - -msgctxt "iba_ERROR_WHILE_MODIFYING_IBAY" -msgid "An error occurred while modifying the i-bay." -msgstr "" - -msgctxt "iba_SUCCESSFULLY_MODIFIED_IBAY" -msgid "Successfully modified i-bay." -msgstr "" - -msgctxt "iba_VIRTUAL_HOST_MESSAGE" -msgid "" -"The following virtual domains were using this information\n" -"bay as their content and will be changed to the primary web \n" -"site (you can change them to something else afterward)." -msgstr "" - -msgctxt "iba_SUCCESSFULLY_DELETED_IBAY" -msgid "Successfully deleted i-bay." -msgstr "" - -msgctxt "iba_ERROR_WHILE_DELETING_IBAY" -msgid "An error occurred while deleting the i-bay." -msgstr "" - -msgctxt "iba_PASSWORD_DESC" -msgid "You are about to change the password for the i-bay [_1]." -msgstr "" - -msgctxt "iba_IBAY_PASSWD_VALIDATION_ERROR" -msgid "The password may contain only letters and numbers." -msgstr "" - -msgctxt "iba_IBAY_PASSWD_VERIFY_ERROR" -msgid "The passwords do not match." -msgstr "" - -msgctxt "iba_SUCCESSFULLY_RESET_PASSWORD" -msgid "Successfully reset password." -msgstr "" - -msgctxt "iba_ERROR_WHILE_RESETTING_PASSWORD" -msgid "Error while resetting password." -msgstr "" - -msgctxt "iba_VHOST_MESSAGE" -msgid "" -"

The following virtual domains were using this information bay \n" -"as their content and will be changed to the primary web site \n" -"(you can change them to something else afterward):

" -msgstr "" - -msgctxt "Information bays" -msgid "Information bays" -msgstr "" - -msgctxt "WGRG" -msgid "Write = group, Read = group" -msgstr "" - -msgctxt "WGRE" -msgid "Write = group, Read = everyone" -msgstr "" - -msgctxt "WARG" -msgid "Write = admin, Read = group" -msgstr "" - -msgctxt "NONE" -msgid "No access" -msgstr "" - -msgctxt "LOCAL_NETWORK_NO_PASSWORD" -msgid "Local network (no password required)" -msgstr "" - -msgctxt "LOCAL_NETWORK_PASSWORD" -msgid "Local network (password required)" -msgstr "" - -msgctxt "ENTIRE_INTERNET_NO_PASSWORD" -msgid "Entire Internet (no password required)" -msgstr "" - -msgctxt "ENTIRE_INTERNET_PASSWORD" -msgid "Entire Internet (password required)" -msgstr "" - -msgctxt "ENTIRE_INTERNET_PASSWORD_REMOTE" -msgid "Entire Internet (password required outside local network)" -msgstr "" - -msgctxt "INVALID_IBAY_DESCRIPTION" -msgid "Error: unexpected or missing characters in i-bay description" -msgstr "" - -msgctxt "iba_ACCT_NAME_HAS_INVALID_CHARS" -msgid "" -"The i-bay name \"[_1]\" contains invalid characters.\n" -"I-bay names must start with a lower case letter and contain\n" -"only lower case letters, numbers, and hyphens." -msgstr "" - -msgctxt "iba_MAX_IBAY_NAME_LENGTH_ERROR" -msgid "" -"The i-bay name \"[_1]\" is too long. The maximum is \n" -"[_2] characters." -msgstr "" - -msgctxt "iba_ACCT_CLASHES_WITH_PSEUDONYM" -msgid "" -"The account \"[_1]\" clashes with pseudonym\n" -"details for [_2] account \"[_3]\".\n" -"

[_1] is a pseudonym for [_2].

" -msgstr "" - -msgctxt "iba_ACCOUNT_EXISTS" -msgid "The account \"[_1]\" is an existing [_2] account." -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Initial/pofiles/initial_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Initial/pofiles/initial_en.po deleted file mode 100644 index 8f9c5bf..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Initial/pofiles/initial_en.po +++ /dev/null @@ -1,69 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "initial_FORM_TITLE" -msgid "Welcome to the server manager" -msgstr "" - -msgctxt "initial_FRAMES_BODY" -msgid "" -"

\n" -" Welcome to SME Server, the leading Linux distribution for\n" -" small and medium enterprises. SME Server is brought to\n" -" you by Koozali Foundation, Inc.,\n" -" a non-profit corporation that exists to provide marketing and\n" -" legal support for SME Server.\n" -"

\n" -"\n" -"

\n" -" SME Server is freely available under the GNU General Public\n" -" License and is only possible through the efforts of the SME\n" -" Server community. However, the availability and quality of SME\n" -" Server is dependent on meeting our expenses, such as hosting\n" -" costs, server hardware, etc.\n" -"

\n" -"\n" -"\n" -"

\n" -" As such, we ask for a donation to offset costs and fund\n" -" further development.\n" -"

\n" -"\n" -"

\n" -" a) If you are a school, a church, a non-profit organisation or an\n" -" individual using SME for private purposes, we would appreciate you to\n" -" contribute within your means toward the costs associated with hosting,\n" -" maintenance and development.\n" -"

\n" -"\n" -"

\n" -" b) If you are a company or an integrator and you are deploying SME in\n" -" the course of your work to generate revenue, we expect you to make a\n" -" donation commensurate with the level of revenue you generate and the\n" -" number of servers your have in the field. Please, help the project\n" -"

\n" -"\n" -"
\n" -"\n" -"

\n" -" \n" -" \"https://wiki.koozali.org/Donate\"\n" -"

\n" -"\n" -"
\n" -"\n" -"

\n" -" This software comes with ABSOLUTELY NO WARRANTY.\n" -" Please\tclick here\t\n" -" to view detailed support, warranty and licensing information.\n" -"

\n" -"\n" -"

\n" -" To perform a system administration function, click one of the links in the menu on the left of your screen.\n" -"

" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Localnetworks/pofiles/localnetworks_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Localnetworks/pofiles/localnetworks_en.po deleted file mode 100644 index 0918118..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Localnetworks/pofiles/localnetworks_en.po +++ /dev/null @@ -1,159 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "ln_LOCAL NETWORKS" -msgid "Local networks" -msgstr "" - -msgctxt "Local networks" -msgid "Local networks" -msgstr "" - -msgctxt "ln_FIRSTPAGE_DESC" -msgid "" -"For security reasons, several services on your server are available only to " -"your local network. However you can grant these local access privileges to " -"additional networks by listing them below. Most installations should leave " -"this list empty." -msgstr "" - -msgctxt "ln_ADD_TITLE" -msgid "Add a local network" -msgstr "" - -msgctxt "ln_ADD_DESC" -msgid "" -"Each parameter must be in the form #.#.#.# (each # is a number from 0 to " -"255). The server software will zero out the ending (host identifier) part " -"of the network address according to the subnet mask, to ensure that the " -"network address is valid.

\"Router\" should be the IP address of " -"the router on your local network via which the additional network is " -"reached." -msgstr "" - -msgctxt "ln_NETWORK_ADDRESS" -msgid "Network address" -msgstr "" - -msgctxt "ln_SUBNET_MASK" -msgid "Subnet mask" -msgstr "" - -msgctxt "ln_INVALID_IP_ADDRESS" -msgid "Invalid IP address - [_1]" -msgstr "" - -msgctxt "ln_INVALID_SUBNET_MASK" -msgid "Invalid subnet mask" -msgstr "" - -msgctxt "ln_REMOVE_TITLE" -msgid "Remove local network" -msgstr "" - -msgctxt "ln_REMOVE_DESC" -msgid "You are about to remove the following local network." -msgstr "" - -msgctxt "ln_REMOVE_CONFIRM" -msgid "Are you sure you wish to remove this network?" -msgstr "" - -msgctxt "ln_DEFAULT" -msgid "default" -msgstr "" - -msgctxt "ln_NUMBER_OF_HOSTS" -msgid "Number of hosts" -msgstr "" - -msgctxt "ln_NOT_ACCESSIBLE_FROM_LOCAL_NETWORK" -msgid "" -"Error: router address {$networkRouter} is not accessible from local " -"network. Did not add network." -msgstr "" - -msgctxt "ln_LOCALNETWORK_ADD" -msgid "Add network" -msgstr "" - -msgctxt "ln_NETWORK_ALREADY_LOCAL" -msgid "" -"Error: network {$network} (derived from network {$networkAddress} and " -"subnet mask {$networkMask}) is already considered local. Did not add new " -"network." -msgstr "" - -msgctxt "ln_NETWORK_ALREADY_ADDED" -msgid "" -"Error: network {$network} (derived from network {$networkAddress} and " -"subnet mask {$networkMask}) has already been added. Did not add new " -"network." -msgstr "" - -msgctxt "ln_ERROR_CREATING_NETWORK" -msgid "Error occurred while creating network." -msgstr "" - -msgctxt "ln_SUCCESS" -msgid "Successfully added network [_1]/[_2] via router [_3]." -msgstr "" - -msgctxt "ln_SUCCESS_SINGLE_ADDRESS" -msgid "" -"Successfully added network {$network}/{$networkMask} via router " -"{$networkRouter}. Your server will grant local access privileges to the " -"single IP address {$network}." -msgstr "" - -msgctxt "ln_SUCCESS_NETWORK_RANGE" -msgid "" -"Successfully added network [_1]/[_2] via router [_3]. Your server will grant" -" local access privileges to [_4] IP addresses in the range [_5] to [_6]." -msgstr "" - -msgctxt "ln_NO_SUCH_NETWORK" -msgid "Network not found in network db" -msgstr "" - -msgctxt "ln_SUCCESS_REMOVED_NETWORK" -msgid "Successfully removed network [_1]/[_2] via router [_3]." -msgstr "" - -msgctxt "ln_ERROR_DELETING_NETWORK" -msgid "Error occurred while deleting network." -msgstr "" - -msgctxt "ln_NO_ADDITIONAL_NETWORKS" -msgid "No additional networks" -msgstr "" - -msgctxt "ln_REMOVE_HOSTS_DESC" -msgid "" -"Local hosts configured on the network you are about to remove have been " -"detected. By default, they will also be removed. Uncheck this box if, for " -"some reason, you do not wish this to happen. Note that they will not be " -"treated as local, and may not even be reachable, after this network is " -"removed." -msgstr "" - -msgctxt "ln_REMOVE_HOSTS_LABEL" -msgid "Remove hosts on network" -msgstr "" - -msgctxt "ln_extra" -msgid "{$network}/{$networkMask} via router $networkRouter}." -msgstr "" - -msgctxt "ln_SUCCESS_NONSTANDARD_RANGE" -msgid "" -"

Successfully added network [_1]/[_2] via router [_3].

Your server" -" will grant local access privileges to [_4] IP addresses in the range [_5] " -"to [_6].

Warning: the ProFTPd FTP server cannot handle this " -"nonstandard subnet mask. The simpler specification [_7] will be used" -" instead.

" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Login/pofiles/login_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Login/pofiles/login_en.po deleted file mode 100644 index 127f0f4..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Login/pofiles/login_en.po +++ /dev/null @@ -1,83 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "use_TITLE" -msgid "User login" -msgstr "" - -msgctxt "use_SIGNIN" -msgid "Sign in" -msgstr "" - -msgctxt "use_FORGOT" -msgid "Forgot password ?" -msgstr "" - -msgctxt "use_RESET_REGISTERED" -msgid "" -"A password reset message has been sent to the e-mail address of this account.
\n" -"If you do not receive it, check your spam/junk folders or ask your local administrator for help.
\n" -"If it is not there ask your local administrator." -msgstr "" - -msgctxt "use_TOO_MANY_LOGIN" -msgid "" -"Login access blocked !!
Too many failed login attempts. Try again later" -msgstr "" - -msgctxt "use_INVALID_DATA" -msgid "Invalid input data, Try again" -msgstr "" - -msgctxt "use_WELCOME" -msgid "Welcome Back!" -msgstr "" - -msgctxt "use_SORRY" -msgid "Sorry try again" -msgstr "" - -msgctxt "use_ERR_NAME" -msgid "Enter a valid account name" -msgstr "" - -msgctxt "use_NOT_THAT_OPER" -msgid "Operation not allowed for this account." -msgstr "" - -msgctxt "use_CONFIRM_RESET" -msgid "Confirm Password Reset" -msgstr "" - -msgctxt "use_GO_TO_URL" -msgid "" -"Password reset\n" -"\n" -"Click the following link to reset your password. If you have not requested the password reset, then ignore this email.\n" -"\n" -"[_1]" -msgstr "" - -msgctxt "use_BYE" -msgid "Goodbye !" -msgstr "" - -msgctxt "use_DESC_RESET" -msgid "Please enter an account name for a password reset !" -msgstr "" - -msgctxt "use_RESET" -msgid "Reset Password" -msgstr "" - -msgctxt "use_OK_FOR_RESET" -msgid "You are about to reset your user account password" -msgstr "" - -msgctxt "use_INVALID_REQUEST" -msgid "Error: your request is invalid or outdated" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Manual/pofiles/manual_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Manual/pofiles/manual_en.po deleted file mode 100644 index 5d1eb0e..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Manual/pofiles/manual_en.po +++ /dev/null @@ -1,29 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "manual_FORM_TITLE" -msgid "Online manual and other documentation" -msgstr "" - -msgctxt "manual_DESCRIPTION" -msgid "" -"\t

Support and licensing

\tThis software is released " -"under the terms listed in the \tSupport and " -"Licensing page." -msgstr "" - -msgctxt "Documentation" -msgid "Documentation" -msgstr "" - -msgctxt "Online manual" -msgid "Online manual" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Portforwarding/pofiles/portforwarding_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Portforwarding/pofiles/portforwarding_en.po deleted file mode 100644 index fd49c61..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Portforwarding/pofiles/portforwarding_en.po +++ /dev/null @@ -1,155 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "pf_FORM_TITLE" -msgid "Configure Port Forwarding" -msgstr "" - -msgctxt "pf_FIRST_PAGE_DESCRIPTION" -msgid "" -"

\n" -" You can use this panel to modify your firewall rules so\n" -" as to open a specific port on this server and forward it\n" -" to another port on another host. Doing so will permit\n" -" incoming traffic to directly access a private host on\n" -" your LAN.\n" -"

\n" -" WARNING: Misuse of this feature can seriously compromise the\n" -" security of your network. Do not use this feature\n" -" lightly, or without fully understanding the implications\n" -" of your actions.\n" -"

" -msgstr "" - -msgctxt "pf_CREATE_RULE" -msgid "Create portforwarding rule" -msgstr "" - -msgctxt "pf_SUMMARY_ADD_DESC" -msgid "" -"The following summarizes the port-forwarding rule\n" -" that you are about to add. If you are satisfied with the rule,\n" -" click the \\'Add\\' button." -msgstr "" - -msgctxt "pf_SUMMARY_REMOVE_DESC" -msgid "" -"The following summarizes the port-forwarding rule\n" -" that you are about to remove. If you are sure you want to \n" -" remove the rule, click the \\'Remove\\' button." -msgstr "" - -msgctxt "pf_SHOW_FORWARDS" -msgid "" -"Below you will find a table summarizing the current\n" -" port-forwarding rules installed on this server. Click on the\n" -" \\'Remove\\' link to remove the corresponding rule." -msgstr "" - -msgctxt "pf_NO_FORWARDS" -msgid "There are currently no forwarded ports on the system." -msgstr "" - -msgctxt "pf_CREATE_PAGE_DESCRIPTION" -msgid "" -"

Select the protocol, the port you wish to forward, the\n" -" destination host, and the port on the destination host\n" -" that you wish to forward to. If you wish to specify a port\n" -" range, enter the lower and upper boundaries separated by a\n" -" hyphen. The destination port may be left blank, which will\n" -" instruct the firewall to leave the source port \n" -" unaltered.

" -msgstr "" - -msgctxt "pf_LABEL_SOURCE_PORT" -msgid "Source Port(s)" -msgstr "" - -msgctxt "pf_LABEL_PROTOCOL" -msgid "Protocol" -msgstr "" - -msgctxt "pf_LABEL_DESTINATION_PORT" -msgid "Destination Port(s)" -msgstr "" - -msgctxt "pf_LABEL_DESTINATION_HOST" -msgid "Destination Host IP Address" -msgstr "" - -msgctxt "pf_LABEL_RULE_COMMENT" -msgid "Rule Comment" -msgstr "" - -msgctxt "pf_LABEL_ALLOW_HOSTS" -msgid "Allow Hosts" -msgstr "" - -msgctxt "Port forwarding" -msgid "Port forwarding" -msgstr "" - -msgctxt "pf_SUCCESS" -msgid "Your change to the port forwarding rules has been successfully saved." -msgstr "" - -msgctxt "pf_RULE_COMMENT" -msgid "Rule Comment" -msgstr "" - -msgctxt "pf_ALLOW_HOSTS" -msgid "Allow Hosts" -msgstr "" - -msgctxt "pf_ERR_NO_MASQ_RECORD" -msgid "Cannot retrieve masq record from the configuration database." -msgstr "" - -msgctxt "pf_ERR_UNSUPPORTED_MODE" -msgid "Unsupported mode." -msgstr "" - -msgctxt "pf_ERR_CANNOT_REMOVE_NORULE" -msgid "Cannot remove non-existant rule." -msgstr "" - -msgctxt "pf_ERR_NONZERO_RETURN_EVENT" -msgid "Event returned a non-zero return value." -msgstr "" - -msgctxt "pf_ERR_BADPORT" -msgid "The ports must be a positive integer less than 65536." -msgstr "" - -msgctxt "pf_ERR_BADIP" -msgid "" -"This does not appear to be an IP address. You must use\n" -" dotted-quad notation, and each of the four numbers should be less\n" -" than 256. ie: 192.168.0.5" -msgstr "" - -msgctxt "pf_ERR_DUPRULE" -msgid "This rule has already been added, it cannot be added twice." -msgstr "" - -msgctxt "pf_ERR_PORT_COLLISION" -msgid "" -"ERROR: This port or port range conflicts with an existing\n" -" rule. Please modify this new rule, or remove the old rule." -msgstr "" - -msgctxt "pf_ERR_BADAHOST" -msgid "" -"This does not appear to be a valid IP address list.\n" -" ie: 192.168.0.1,192.168.1.1/24" -msgstr "" - -msgctxt "pf_IN_SERVERONLY" -msgid "" -"This server is currently in serveronly mode and portforwarding\n" -" is possible only to localhost." -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Printers/pofiles/printers_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Printers/pofiles/printers_en.po deleted file mode 100644 index 89aa1ba..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Printers/pofiles/printers_en.po +++ /dev/null @@ -1,173 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'prt_FORM_TITLE'" -msgid "Add or remove printers" -msgstr "" - -msgctxt "prt_INITIAL_BTN" -msgid "Add printer" -msgstr "" - -msgctxt "prt_INITIAL_DESC" -msgid "" -"

Add " -"printer

" -msgstr "" - -msgctxt "prt_NO_PRINTERS" -msgid "There are no printers in the system." -msgstr "" - -msgctxt "prt_CURRENT_LIST" -msgid "Current List of printers" -msgstr "" - -msgctxt "prt_REMOTE_ADDRESS" -msgid "Remote address" -msgstr "" - -msgctxt "prt_REMOTE_NAME" -msgid "Remote name" -msgstr "" - -msgctxt "prt_CREATE_NEW_PRINTER" -msgid "Create a new printer" -msgstr "" - -msgctxt "prt_CREATE_NEW_DESC" -msgid "" -"Please choose a unique name for the printer and enter a brief\n" -"description. The printer name should contain only lower-case\n" -"letters and numbers, and should start with a lower-case\n" -"letter. For example \"hplaser\", \"epsonlp\", and\n" -"\"canonbj\" are valid choices, but \"HP Laser Jet\", \n" -"\"Canon BubbleJet\", and\n" -"\"HP JetDirect Printer\" are not.\n" -"Avoid names and descriptions that contain these terms, \n" -"\"offline\", \"disabled\", \"down\", \"off\", \"waiting\", \"jam\",\n" -"\"paper\", \"error\" and \"responding\"." -msgstr "" - -msgctxt "prt_PRINTER_NAME" -msgid "Printer name" -msgstr "" - -msgctxt "prt_LOCAL_PRINTER_0" -msgid "Local printer port 0 (LPT1)" -msgstr "" - -msgctxt "prt_LOCAL_PRINTER_1" -msgid "Local printer port 1 (LPT2)" -msgstr "" - -msgctxt "prt_LOCAL_PRINTER_2" -msgid "Local printer port 2 (LPT3)" -msgstr "" - -msgctxt "prt_NET_PRINTER" -msgid "Network printer ..." -msgstr "" - -msgctxt "prt_FIRST_USB_PRINTER" -msgid "First USB attached printer" -msgstr "" - -msgctxt "prt_SECOND_USB_PRINTER" -msgid "Second USB attached printer" -msgstr "" - -msgctxt "prt_ERR_UNEXPECTED_NAME" -msgid "" -"

Error: unexpected characters in printer name.

\n" -"

The printer name should contain only lower-case \n" -"letters and numbers, and should start with a lower-case \n" -"letter. For example \"hplaser\", \"epsonlp\", and \n" -"\"canonbj\" are valid names.

" -msgstr "" - -msgctxt "prt_ERR_UNEXPECTED_DESC" -msgid "" -"Error: unexpected or missing characters in description. \n" -"Did not create new printer." -msgstr "" - -msgctxt "prt_ERR_EXISTS" -msgid "Error: An account with the same name exists with type:" -msgstr "" - -msgctxt "prt_ERR_INVALID_ADDRESS" -msgid "Error: invalid network address. Did not create new printer." -msgstr "" - -msgctxt "prt_ERR_INVALID_REMOTE_NAME" -msgid "Error: invalid network printer name. Did not create new printer." -msgstr "" - -msgctxt "prt_ERR_CREATING" -msgid "Error occurred while creating printer." -msgstr "" - -msgctxt "prt_CREATED_SUCCESSFULLY" -msgid "Successfully created printer:" -msgstr "" - -msgctxt "prt_CREATE_NETWORK_PRINTER" -msgid "Create a new network printer" -msgstr "" - -msgctxt "prt_ERR_OPENING_DB" -msgid "Error occurred while opening accounts database." -msgstr "" - -msgctxt "prt_CREATE_NETWORK_DESC" -msgid "Please enter the address and name of the network printer" -msgstr "" - -msgctxt "prt_HOSTNAME_OR_IP" -msgid "Hostname or IP address of the network printer" -msgstr "" - -msgctxt "prt_REMOTE_NAME_DESC" -msgid "Network printer name (enter raw if not sure)" -msgstr "" - -msgctxt "prt_REMOVE_PRINTER" -msgid "Remove printer" -msgstr "" - -msgctxt "prt_ABOUT_TO_REMOVE" -msgid "You are about to remove the printer:" -msgstr "" - -msgctxt "prt_SPOOL_FILE_WARNING" -msgid "All the spool files for this printer will be deleted." -msgstr "" - -msgctxt "prt_ARE_YOU_SURE" -msgid "Are you sure you wish to remove this printer?" -msgstr "" - -msgctxt "prt_ERR_INTERNAL_FAILURE" -msgid "Error: internal failure while removing printer:" -msgstr "" - -msgctxt "prt_ERR_DELETING" -msgid "Error occurred while deleting printer." -msgstr "" - -msgctxt "prt_DELETED_SUCCESSFULLY" -msgid "Successfully deleted printer:" -msgstr "" - -msgctxt "prt_MUST_BE_VALID_HOSTNAME_OR_IP" -msgid "Must be a valid hostname or IP number" -msgstr "" - -msgctxt "Printers" -msgid "Printers" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Proxy/pofiles/proxy_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Proxy/pofiles/proxy_en.po deleted file mode 100644 index 8c78a04..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Proxy/pofiles/proxy_en.po +++ /dev/null @@ -1,70 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'prx_TITLE'" -msgid "Proxy settings" -msgstr "" - -msgctxt "prx_FIRST_PAGE_DESCRIPTION" -msgid "" -"This page allows configuration of the server\\'s \n" -"proxy settings.\n" -"The server includes a transparent proxy and cache for \n" -"HTTP traffic. This is enabled by default, but not enforced \n" -"if the server is in "serveronly" mode. \n" -"If this server is acting as an e-mail server, connections \n" -"from local network clients to external SMTP servers \n" -"will default to being redirected to the local e-mail server." -msgstr "" - -msgctxt "prx_HTTP_PROXY_STATUS_DESCRIPTION" -msgid "" -"The server\\'s HTTP proxy works to reduce overall uplink usage by\n" -"caching recently-visited pages. It is transparent to web browsers\n" -"using this server as their gateway. Enable or disable this proxy\n" -"with the following toggle." -msgstr "" - -msgctxt "prx_HTTP_PROXY_STATUS_LABEL" -msgid "HTTP proxy status" -msgstr "" - -msgctxt "prx_SMTP_PROXY_STATUS_DESCRIPTION" -msgid "" -"The server\\'s transparent SMTP proxy works to reduce virus traffic \n" -"from infected client hosts by forcing all outgoing SMTP traffic \n" -"through this server if set to \"enabled\". \n" -"If you wish to use an alternate SMTP server, and this server is \n" -"your gateway to it, set this proxy to \"disabled\". Setting the \n" -"proxy to \"blocked\" prevents all SMTP traffic to other servers, \n" -"this is the default. The proxy only intercepts/blocks normal smtp \n" -"(port 25) traffic." -msgstr "" - -msgctxt "prx_SMTP_PROXY_STATUS_LABEL" -msgid "SMTP proxy status" -msgstr "" - -msgctxt "prx_ERR_PROXY_UPDATE_FAILED" -msgid "ERROR: The proxy-update event returned an error." -msgstr "" - -msgctxt "prx_ERR_NO_SQUID_REC" -msgid "ERROR: There is no squid record in the configuration database." -msgstr "" - -msgctxt "prx_SUCCESS" -msgid "The new proxy settings were applied successfully." -msgstr "" - -msgctxt "prx_BLOCKED" -msgid "Blocked" -msgstr "" - -msgctxt "Proxy settings" -msgid "Proxy settings" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Pseudonyms/pofiles/pseudonyms_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Pseudonyms/pofiles/pseudonyms_en.po deleted file mode 100644 index 8038d1f..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Pseudonyms/pofiles/pseudonyms_en.po +++ /dev/null @@ -1,159 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'pse_NO_PSEUDONYMS'" -msgid "There are no pseudonyms in the system." -msgstr "" - -msgctxt "pse_REMOVE_PSEUDONYM" -msgid "Remove pseudonym" -msgstr "" - -msgctxt "pse_ABOUT_TO_REMOVE" -msgid "" -"You are about to remove the pseudonym: [_1]
\n" -"Are you sure you wish to continue?" -msgstr "" - -msgctxt "pse_FORM_TITLE" -msgid "Create, modify, or remove pseudonyms" -msgstr "" - -msgctxt "pse_DESCRIPTION" -msgid "" -"

The server automatically creates\n" -"an e-mail alias for each group. If you want to define an e-mail\n" -"alias for a list of users, simply create a group and the\n" -"list will automatically be maintained by the server.

\n" -"

Pseudonyms allow you to\n" -"create other names for existing users or groups.\n" -"For example, you may wish to create a pseudonym\n" -"\"webmaster\" for your \"webdevelopers\" group or a\n" -"pseudonym \"joe\" for the user \"joseph\".

\n" -"

The server automatically creates pseudonyms of the form\n" -"firstname.lastname and firstname_lastname for every user\n" -"on the system and a pseudonym \"everyone\" which contains\n" -"all users on the system.

\n" -"

Pseudonyms also allow you to create e-mail aliases for valid\n" -"(virtual) domains & users. For example you can forward\n" -"\"sales@virtualdomain1.com\" to user \"mary\" and \n" -"\"sales@virtualdomain2.com\" to user \"john\".\n" -"You must create the domains and user accounts before creating\n" -"the email aliases.

\n" -"

Pseudonyms can also forward to other pseudonyms, although this\n" -"is limited to one further level. For example the pseudonym\n" -"\"webmaster\" can forward to the pseudonym \"techsupport\" which\n" -"then forwards to a specified user \"ray\". This is useful where\n" -"one user is responsiblefor multiple roles and saves having\n" -"to change the pseudonym\\'s associated with that user many times\n" -"in the event that the user departs the organisation.

\n" -"

You can modify or remove a\n" -"pseudonym by clicking on the corresponding\n" -"command next to the pseudonym.

" -msgstr "" - -msgctxt "pse_LOCAL_ONLY" -msgid "(local network only)" -msgstr "" - -msgctxt "pse_SELECT_ACCOUNT" -msgid "Select account or group" -msgstr "" - -msgctxt "pse_SELECT_INTERNAL" -msgid "Local network only" -msgstr "" - -msgctxt "pse_CLICK_TO_CREATE" -msgid "Add pseudonym" -msgstr "" - -msgctxt "pse_PSEUDONYM" -msgid "Pseudonym" -msgstr "" - -msgctxt "pse_USER_OR_GROUP" -msgid "User or group" -msgstr "" - -msgctxt "pse_CURRENT_PSEUDONYMS" -msgid "Current List of Pseudonyms" -msgstr "" - -msgctxt "pse_TITLE_CREATE" -msgid "Create a pseudonym" -msgstr "" - -msgctxt "pse_DESC_PSEUDONYM_NAME" -msgid "" -"Please select an existing account or group for the pseudonym from the " -"pulldown menu below" -msgstr "" - -msgctxt "pse_MODIFY_PSEUDONYM" -msgid "Modify Pseudonym" -msgstr "" - -msgctxt "pse_PSEUDONYM_NAME" -msgid "Pseudonym name" -msgstr "" - -msgctxt "pse_VALID_PSEUDONYM_NAMES" -msgid "" -"The pseudonym\n" -" should contain only lower-case letters, numbers, period, \n" -" hyphen and underscore \n" -" and should start with a lower-case letter or \n" -" number. For example \"sales\", \"john.holland\", \"123\" \n" -" and \"email-administrator\" are all valid pseudonyms, \n" -" but \"John Smith\" and \"Henry Miller\" are not.\n" -"

You can also create email aliases for accounts and (virtual)\n" -"domains that are valid on this server. For example\n" -"\"fred@virtualdomain.com\" can be forwarded to \"mary\"\n" -"(or to another valid user account).

" -msgstr "" - -msgctxt "pse_NAME_IN_USE" -msgid "" -"Error: That name is in use You cannot create a pseudonym with that name." -msgstr "" - -msgctxt "pse_NOT_A_PSEUDONYM" -msgid "That account is not a pseudonym" -msgstr "" - -msgctxt "pse_PSEUDONYM_INVALID_DOMAIN" -msgid "That domain is not hosted on this server" -msgstr "" - -msgctxt "pse_PSEUDONYM_INVALID_NOACCT" -msgid "That account is not hosted on this server" -msgstr "" - -msgctxt "pse_PSEUDONYM_INVALID_SAMEACCT" -msgid "A pseudonym cannot point to the same account" -msgstr "" - -msgctxt "pse_CREATE_SUCCEEDED" -msgid "Successfully created pseudonym" -msgstr "" - -msgctxt "pse_MODIFY_SUCCEEDED" -msgid "Successfully modified pseudonym" -msgstr "" - -msgctxt "pse_REMOVE_SUCCEEDED" -msgid "Successfully removed pseudonym" -msgstr "" - -msgctxt "pse_EVERYONE" -msgid "Everyone" -msgstr "" - -msgctxt "Pseudonyms" -msgid "Pseudonyms" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Qmailanalog/pofiles/qmailanalog_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Qmailanalog/pofiles/qmailanalog_en.po deleted file mode 100644 index d1cea00..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Qmailanalog/pofiles/qmailanalog_en.po +++ /dev/null @@ -1,96 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'qma_FORM_TITLE'" -msgid "Mail Log File Analysis" -msgstr "" - -msgctxt "qma_INITIAL_DESC" -msgid "" -"

Analysing the mail system log files can aid both in\n" -"understanding how your system is performing and in\n" -"diagnosing delivery problems. Several different\n" -"reports are available.

\n" -"

Please note that it may take several minutes to generate\n" -"these reports

" -msgstr "" - -msgctxt "qma_REPORT_TYPE" -msgid "Choose a report type" -msgstr "" - -msgctxt "qma_GENERATE_REPORT" -msgid "Generate report" -msgstr "" - -msgctxt "qma_LIST_OUTGOING" -msgid "List outgoing messages and recipients" -msgstr "" - -msgctxt "qma_SUMMARIZE_QUEUE" -msgid "Summarize status of mail queue" -msgstr "" - -msgctxt "qma_SUCCESSFUL_DELIVERY_DELAY" -msgid "Successful delivery delay distribution" -msgstr "" - -msgctxt "qma_REASONS_DEFERRAL" -msgid "Reasons for deferral" -msgstr "" - -msgctxt "qma_REASONS_FAILURE" -msgid "Reasons for failure" -msgstr "" - -msgctxt "qma_BASIC_STATS" -msgid "Basic statistics" -msgstr "" - -msgctxt "qma_RECIP_STATS" -msgid "Recipients statistics" -msgstr "" - -msgctxt "qma_RECIP_HOSTS" -msgid "Recipient hosts" -msgstr "" - -msgctxt "qma_RECIP_ORDERED" -msgid "Recipients in best order for mailing lists" -msgstr "" - -msgctxt "qma_SENDER_STATS" -msgid "Sender statistics" -msgstr "" - -msgctxt "qma_SENDMAIL_STYLE" -msgid "Sendmail style log" -msgstr "" - -msgctxt "qma_REASONS_SUCCESS" -msgid "Reasons for success" -msgstr "" - -msgctxt "qma_SENDER_UIDS" -msgid "Sender uids" -msgstr "" - -msgctxt "qma_INVALID_REPORT_TYPE" -msgid "Invalid report type:" -msgstr "" - -msgctxt "qma_REPORT_GENERATED" -msgid "Report generated:" -msgstr "" - -msgctxt "qma_END_OF_REPORT" -msgid "End of Report" -msgstr "" - -msgctxt "Mail log file analysis" -msgid "Mail log file analysis" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Quota/pofiles/quota_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Quota/pofiles/quota_en.po deleted file mode 100644 index 10584fc..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Quota/pofiles/quota_en.po +++ /dev/null @@ -1,128 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'quo_FORM_TITLE'" -msgid "Create, modify, or remove user account quotas" -msgstr "" - -msgctxt "quo_UNABLE_TO_OPEN_ACCOUNTS" -msgid "Unable to open accounts db" -msgstr "" - -msgctxt "quo_QUOTA_DESC" -msgid "" -"

You can set filesystem quotas for users on your system by clicking\n" -"the \"Modify\" button next to the user you wish to update.\n" -"

If the user exceeds the \"Limit with grace period\", warnings will be\n" -"generated. If this limit is exceeded for longer than a week or if the\n" -"\"Absolute limit\" is reached, the user will be unable to store any more\n" -"files or receive any more e-mail.\n" -"

A setting of \\'0\\' for either limit disables that limit for the\n" -"corresponding user.\n" -"

The disk space for each user includes the user\\'s home directory,\n" -"e-mail, and any files owned by the user in information bays." -msgstr "" - -msgctxt "quo_CURRENT_USAGE_AND_SETTINGS" -msgid "Current Quota Usage and Settings" -msgstr "" - -msgctxt "quo_LIMIT_WITH_GRACE" -msgid "Limit with grace period" -msgstr "" - -msgctxt "quo_LIMIT_WITH_GRACE_MB" -msgid "Limit with grace period (MB)" -msgstr "" - -msgctxt "quo_ABS_LIMIT" -msgid "Absolute limit" -msgstr "" - -msgctxt "quo_ABS_LIMIT_MB" -msgid "Absolute limit (MB)" -msgstr "" - -msgctxt "quo_CURRENT_USAGE" -msgid "Current usage (MB)" -msgstr "" - -msgctxt "quo_COULD_NOT_GET_UID" -msgid "Could not determine the uid for user:" -msgstr "" - -msgctxt "quo_ERR_NO_SUCH_ACCT" -msgid "Error: there is no account named:" -msgstr "" - -msgctxt "quo_ERR_NOT_A_USER_ACCT" -msgid "Error: the account is not a user account:" -msgstr "" - -msgctxt "quo_ACCOUNT_IS_TYPE" -msgid "It is an account of type:" -msgstr "" - -msgctxt "quo_MODIFY_USER_TITLE" -msgid "Modify user quota limits" -msgstr "" - -msgctxt "quo_USER" -msgid "User:" -msgstr "" - -msgctxt "quo_CURRENTLY_HAS" -msgid "currently has:" -msgstr "" - -msgctxt "quo_FILES" -msgid "files" -msgstr "" - -msgctxt "quo_OCCUPYING" -msgid "occupying:" -msgstr "" - -msgctxt "quo_MEGABYTES" -msgid "megabytes" -msgstr "" - -msgctxt "quo_INSTRUCTIONS" -msgid "" -"Enter the quota with optional unit suffix of \\'K\\' for kilobytes, \\'M\\' for megabytes, \n" -"\\'G\\' for gigabytes or \\'T\\' for terabytes. \n" -"Entries with no suffix are assumed to be in megabytes. A setting of \\'0\\'\n" -"for either limit disables that limit for the corresponding user." -msgstr "" - -msgctxt "quo_SOFT_VAL_MUST_BE_NUMBER" -msgid "" -"Error: limit with grace period must be a number, optionally followed by one " -"of the unit suffixes K, M, G, or T." -msgstr "" - -msgctxt "quo_HARD_VAL_MUST_BE_NUMBER" -msgid "" -"Error: absolute limit must be a number, optionally followed by one of the " -"unit suffixes K, M, G, or T." -msgstr "" - -msgctxt "quo_ERR_HARD_LT_SOFT" -msgid "Error: absolute limit must be greater than limit with grace time." -msgstr "" - -msgctxt "quo_ERR_MODIFYING" -msgid "Error occurred while modifying user." -msgstr "" - -msgctxt "quo_SUCCESSFULLY_MODIFIED" -msgid "Successfully modified quota for user account:" -msgstr "" - -msgctxt "Quotas" -msgid "Quotas" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Reboot/pofiles/reboot_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Reboot/pofiles/reboot_en.po deleted file mode 100644 index 994794f..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Reboot/pofiles/reboot_en.po +++ /dev/null @@ -1,58 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'rbo_FORM_TITLE'" -msgid "Shutdown or reboot" -msgstr "" - -msgctxt "rbo_REBOOT" -msgid "Reboot" -msgstr "" - -msgctxt "rbo_REBOOT_SUCCEEDED" -msgid "Reboot request initiated successfully." -msgstr "" - -msgctxt "rbo_DESC_REBOOT" -msgid "Your server has initiated the reboot process." -msgstr "" - -msgctxt "rbo_RECONFIGURE_SUCCEEDED" -msgid "Reconfiguration request initiated successfully." -msgstr "" - -msgctxt "rbo_DESC_RECONFIGURE" -msgid "Your server has initiated a full system reconfiguration and reboot." -msgstr "" - -msgctxt "rbo_SHUTDOWN_SUCCEEDED" -msgid "Shutdown request initiated successfully." -msgstr "" - -msgctxt "rbo_DESC_SHUTDOWN" -msgid "" -"Your server has initiated the shutdown process. \n" -"The process will take several minutes to complete, after which\n" -"you can switch off the power." -msgstr "" - -msgctxt "rbo_LABEL_REBOOT" -msgid "Select Shutdown, Reboot or Reconfigure" -msgstr "" - -msgctxt "rbo_DESCRIPTION" -msgid "" -"You can reboot, shut down your server or perform a full system\n" -"reconfiguration from this screen. You must perform a shutdown\n" -"before switching the power off. All of these functions take\n" -"several minutes to complete.\n" -"When you click perform the operation will be initiated immediately, so be ready!" -msgstr "" - -msgctxt "Reboot or shutdown" -msgid "Reboot or shutdown" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Remoteaccess/pofiles/remoteaccess_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Remoteaccess/pofiles/remoteaccess_en.po deleted file mode 100644 index 4dbe362..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Remoteaccess/pofiles/remoteaccess_en.po +++ /dev/null @@ -1,251 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'rma_FORM_TITLE'" -msgid "Change remote access settings" -msgstr "" - -msgctxt "rma_DESCRIPTION" -msgid "" -"For each of the options below, the private setting allows anyone\n" -"from your local network to access your server. The\n" -"public setting allows access from anywhere on the Internet. The no\n" -"access setting disables access. To understand the security\n" -"implications of changing these options from the default settings, you\n" -"should read the user\\'s guide section on remote access." -msgstr "" - -msgctxt "rma_SUCCESS" -msgid "The new remote access settings have been saved." -msgstr "" - -msgctxt "rma_NO_ACCESS" -msgid "No Access" -msgstr "" - -msgctxt "rma_PASSWORD_LOGIN_PRIVATE" -msgid "Accept passwords only from local networks" -msgstr "" - -msgctxt "rma_PASSWORD_LOGIN_PUBLIC" -msgid "Accept passwords from anywhere" -msgstr "" - -msgctxt "rma_LABEL_TELNET_ACCESS" -msgid "Telnet access" -msgstr "" - -msgctxt "rma_LABEL_FTP_ACCESS" -msgid "FTP access" -msgstr "" - -msgctxt "rma_LABEL_FTP_LOGIN" -msgid "FTP password access" -msgstr "" - -msgctxt "rma_LABEL_PPTP" -msgid "Number of PPTP clients" -msgstr "" - -msgctxt "" -"rma_NUMBER_OF_PPTP_CLIENTS_MUST_BE_LESSER_THAN_NUMBER_OF_IP_IN_DHCP_RANGE" -msgid "" -"The number of pptp clients is greater than the number of reserved IP for " -"DHCP. You should take a smaller number." -msgstr "" - -msgctxt "rma_LABEL_SSH_PORT" -msgid "TCP Port for secure shell access" -msgstr "" - -msgctxt "rma_LABEL_SSH" -msgid "Secure shell access" -msgstr "" - -msgctxt "rma_LABEL_SSH_ADMIN" -msgid "Allow administrative command line access over secure shell" -msgstr "" - -msgctxt "rma_LABEL_SSH_PASSWORD_ACCESS" -msgid "Allow secure shell access using standard passwords" -msgstr "" - -msgctxt "rma_TITLE_SSH" -msgid "Secure Shell Settings" -msgstr "" - -msgctxt "rma_DESC_SSH" -msgid "" -"You can control Secure Shell access to your server.\n" -"The public setting should only be enabled by \n" -"experienced administrators \n" -"for remote problem diagnosis and resolution. \n" -"We recommend leaving this\n" -"parameter set to \"No Access\"\n" -"unless you have a specific reason to do otherwise." -msgstr "" - -msgctxt "rma_TITLE_FTP_ACCESS" -msgid "FTP Settings" -msgstr "" - -msgctxt "rma_DESC_FTP_ACCESS" -msgid "" -"You can also control FTP access to your server. We\n" -"recommend leaving this parameter set to \\'no access\\' unless you\n" -"have a specific reason to do otherwise.\n" -"

\n" -"Note: these settings limit access to the server and override other \n" -"settings, including those for individual information bays.

" -msgstr "" - -msgctxt "rma_DESC_FTP_LOGIN" -msgid "" -"You can also control authenticated FTP access to information\n" -"bays and user accounts. We strongly recommend leaving this\n" -"parameter set to private unless you have a specific reason to\n" -"do otherwise.\n" -"

\n" -"Note: a secure shell sftp client can also be used to access the\n" -"server, if remote access via the secure shell is enabled.\n" -"This method of access protects the\n" -"passwords and data of the FTP session, whereas standard FTP\n" -"provides no protection.

" -msgstr "" - -msgctxt "rma_TITLE_PPTP" -msgid "PPTP Settings" -msgstr "" - -msgctxt "rma_DESC_PPTP" -msgid "" -"You can allow PPTP access to your server. \n" -"You should leave this feature disabled by setting the value \n" -"to the number 0 unless you require PPTP access." -msgstr "" - -msgctxt "rma_VALUE_ZERO_OR_POSITIVE" -msgid "Value must be zero or a positive integer" -msgstr "" - -msgctxt "rma_REMOTE_MANAGEMENT" -msgid "Remote Management" -msgstr "" - -msgctxt "rma_VALIDFROM_TITLE" -msgid "[_1]" -msgstr "" - -msgctxt "rma_VALIDFROM_DESC" -msgid "" -"It is possible to allow hosts on remote networks to access the\n" -"server manager by entering those networks here. Use a subnet\n" -"mask of 255.255.255.255 to limit the access to the specified host.\n" -"Any hosts within the specified range will be able to access the\n" -"server manager using HTTPS." -msgstr "" - -msgctxt "rma_DESC_VALID_FROM_ENTRIES" -msgid "" -"To add a new remote management network, \n" -"enter the details below." -msgstr "" - -msgctxt "rma_SUBNET_MASK" -msgid "Subnet mask" -msgstr "" - -msgctxt "rma_NUM_OF_HOSTS" -msgid "Number of hosts" -msgstr "" - -msgctxt "rma_NO_ENTRIES_YET" -msgid "There are no entries yet" -msgstr "" - -msgctxt "rma_INVALID_SUBNET_MASK" -msgid "Invalid subnet mask" -msgstr "" - -msgctxt "rma_ERR_INVALID_PARAMS" -msgid "" -"Either provide both a network and subnet mask, or leave both\n" -"fields blank." -msgstr "" - -msgctxt "rma_ERR_NO_RECORD" -msgid "Unable to locate httpd-admin record in configuration db" -msgstr "" - -msgctxt "Remote access" -msgid "Remote access" -msgstr "" - -msgctxt "rma_LABEL_SERIAL_CONSOLE_ACCESS" -msgid "Serial console" -msgstr "" - -msgctxt "rma_DESC_SERIAL_CONSOLE_ACCESS" -msgid "" -"

Serial console

\n" -"You can allow access to the server console from a terminal\n" -"connected to a server serial port." -msgstr "" - -msgctxt "rma_PORT1_ENABLED" -msgid "Enabled on serial port 1" -msgstr "" - -msgctxt "rma_PORT2_ENABLED" -msgid "Enabled on serial port 2" -msgstr "" - -msgctxt "rma_LABEL_PPTP_ACCESS" -msgid "PPTP default user access" -msgstr "" - -msgctxt "rma_TITLE_TELNET_ACCESS" -msgid "Telnet Settings" -msgstr "" - -msgctxt "rma_DESC_TELNET_ACCESS" -msgid "" -"WARNING:Telnet is currently enabled, but this feature is\n" -"no longer supported.Telnet is inherently insecure and should only\n" -"be used in circumstances where no practical alternative exists. You\n" -"should change option to [_1] and use\n" -"secure shell if remote access is\n" -"required.Once disabled, telnet will no longer appear on this \n" -"screen." -msgstr "" - -msgctxt "rma_TITLE_IPSECRW" -msgid "IPSEC Client (Roadwarrior) Settings" -msgstr "" - -msgctxt "rma_DESC_IPSECRW" -msgid "" -"You can allow IPSEC client access to your server, authenticated by\n" -"digital certificates. You should leave this feature disabled by setting the value \n" -"to the number 0 unless you require IPSEC client access." -msgstr "" - -msgctxt "rma_LABEL_IPSECRW_SESS" -msgid "Number of IPSEC clients" -msgstr "" - -msgctxt "rma_DESC_IPSECRW_RESET" -msgid "" -"If you wish to reset all digital certificates, you\n" -"can do so here.
Any old certificates will no longer\n" -"authenticate against the server, so all IPSEC clients will\n" -"need to import a new certificate!." -msgstr "" - -msgctxt "rma_LABEL_IPSECRW_RESET" -msgid "Reset digital certificates" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Review/pofiles/review_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Review/pofiles/review_en.po deleted file mode 100644 index 18b5979..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Review/pofiles/review_en.po +++ /dev/null @@ -1,138 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'rvw_FORM_TITLE'" -msgid "Review configuration" -msgstr "" - -msgctxt "rvw_DESCRIPTION" -msgid "" -"This report summarizes the networking, server, and domain\n" -"parameters on this server relevant to configuring\n" -"the client computers on your network.You may wish to print this\n" -"page and use it as a reference." -msgstr "" - -msgctxt "rvw_NETWORKING_PARAMS" -msgid "Networking Parameters" -msgstr "" - -msgctxt "rvw_SERVER_MODE" -msgid "Server Mode" -msgstr "" - -msgctxt "rvw_LOCAL_IP_ADDRESS_SUBNET_MASK" -msgid "Local IP address / subnet mask" -msgstr "" - -msgctxt "rvw_EXTERNAL_IP_ADDRESS_SUBNET_MASK" -msgid "External IP address / subnet mask" -msgstr "" - -msgctxt "rvw_GATEWAY" -msgid "Gateway" -msgstr "" - -msgctxt "rvw_ADDITIONAL_LOCAL_NETWORKS" -msgid "Additional local networks" -msgstr "" - -msgctxt "rvw_DHCP_SERVER" -msgid "DHCP server" -msgstr "" - -msgctxt "rvw_BEGINNING_OF_DHCP_ADDRESS_RANGE" -msgid "Beginning of DHCP address range" -msgstr "" - -msgctxt "rvw_END_OF_DHCP_ADDRESS_RANGE" -msgid "End of DHCP address range" -msgstr "" - -msgctxt "rvw_SERVER_NAMES" -msgid "Server names" -msgstr "" - -msgctxt "rvw_DNS_SERVER" -msgid "DNS server" -msgstr "" - -msgctxt "rvw_WEB_SERVER" -msgid "Web server" -msgstr "" - -msgctxt "rvw_PROXY_SERVER" -msgid "Proxy server" -msgstr "" - -msgctxt "rvw_FTP_SERVER" -msgid "FTP server" -msgstr "" - -msgctxt "rvw_SMTP_POP_AND_IMAP_MAIL_SERVERS" -msgid "SMTP, POP, and IMAP mail servers" -msgstr "" - -msgctxt "rvw_HOSTS" -msgid "Hosts" -msgstr "" - -msgctxt "rvw_DOMAIN_INFORMATION" -msgid "Domain information" -msgstr "" - -msgctxt "rvw_PRIMARY_DOMAIN" -msgid "Primary domain" -msgstr "" - -msgctxt "rvw_VIRTUAL_DOMAINS" -msgid "Virtual domains" -msgstr "" - -msgctxt "rvw_PRIMARY_WEB_SITE" -msgid "Primary web site" -msgstr "" - -msgctxt "rvw_SERVER_MANAGER" -msgid "Server manager" -msgstr "" - -msgctxt "rvw_USER_PASSWORD_PANEL" -msgid "User password panel" -msgstr "" - -msgctxt "rvw_EMAIL_ADDRESSES" -msgid "Email Addresses" -msgstr "" - -msgctxt "rvw_EMAIL_USERACCOUNT" -msgid "useraccount" -msgstr "" - -msgctxt "rvw_EMAIL_FIRSTNAME" -msgid "firstname" -msgstr "" - -msgctxt "rvw_EMAIL_LASTNAME" -msgid "lastname" -msgstr "" - -msgctxt "rvw_NO_VIRTUAL_DOMAINS" -msgid "No virtual domains defined" -msgstr "" - -msgctxt "rvw_NO_NETWORKS" -msgid "No additional networks defined" -msgstr "" - -msgctxt "rvw_INTERNET_VISIBLE_ADDRESS" -msgid "Internet Visible IP Address" -msgstr "" - -msgctxt "Review configuration" -msgid "Review configuration" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Support/pofiles/support_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Support/pofiles/support_en.po deleted file mode 100644 index 015d173..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Support/pofiles/support_en.po +++ /dev/null @@ -1,14 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "support_FORM_TITLE" -msgid "Support, warranty and licensing information" -msgstr "" - -msgctxt "Support and licensing" -msgid "Support and licensing" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Useraccounts/pofiles/useraccounts_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Useraccounts/pofiles/useraccounts_en.po deleted file mode 100644 index 429d4ad..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Useraccounts/pofiles/useraccounts_en.po +++ /dev/null @@ -1,294 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'usr_FORM_TITLE'" -msgid "Create, modify, or remove user accounts" -msgstr "" - -msgctxt "usr_FIRSTPAGE_DESC" -msgid "" -"

You can modify, lock or remove any account or reset the account\\'s " -"password by clicking on the corresponding command next to the account. " -"

If the account is marked as locked, that means that the user\\'s " -"password needs to be reset. Please note that newly created accounts are " -"automatically locked until the password is changed.

" -msgstr "" - -msgctxt "usr_P2_TITLE" -msgid "Create or modify" -msgstr "" - -msgctxt "usr_CREATE_MODIFY_DESC" -msgid "" -"

The account name should contain only lower-case letters, numbers, " -"hyphens, periods, underscores and should start with a lower-case letter. For" -" example \"betty\",\"hjohnson\", and \"mary-jane\" are all valid account " -"names, but \"3friends\", \"John Smith\", and \"henry:miller\" are not. " -"

Note that two special pseudonyms will be created for each new " -"account. These pseudonyms provide the ability to have alternative mail " -"accounts for that user which include their first name and last name " -"separated with a period (.) and underscore (_). So, for the account " -"\"betty\" with first name \"Betty\" and last name \"Rubble\" two pseudonyms " -"are created as betty.rubble and betty_rubble.

The directory " -"information (department, company, etc.) can be changed from the defaults " -"shown below. The changes will apply only to this user.

" -msgstr "" - -msgctxt "usr_ADD_USER" -msgid "Add user account" -msgstr "" - -msgctxt "usr_MODIFY_ADMIN_TITLE" -msgid "Modify the admin account" -msgstr "" - -msgctxt "usr_USER_CREATED" -msgid "Successfully created user account." -msgstr "" - -msgctxt "usr_USER_MODIFIED" -msgid "Successfully modified user account." -msgstr "" - -msgctxt "usr_CANNOT_MODIFY_USER" -msgid "" -"Error: an internal error occurred while attempting to modify the user " -"\"[_1]\"." -msgstr "" - -msgctxt "usr_CANNOT_MODIFY_USER_GROUPS" -msgid "" -"Error: an internal error occurred while attempting to modify the group " -"\"[_1]\" for user \"[_2]\"." -msgstr "" - -msgctxt "usr_TAINTED_USER" -msgid "The account name \"[_1]\" contains invalid characters." -msgstr "" - -msgctxt "usr_ACCOUNT_NAME" -msgid "Account name" -msgstr "" - -msgctxt "usr_FIRSTNAME" -msgid "First name" -msgstr "" - -msgctxt "usr_LASTNAME" -msgid "Last name" -msgstr "" - -msgctxt "usr_DEPARTMENT" -msgid "Department" -msgstr "" - -msgctxt "usr_COMPANY" -msgid "Company" -msgstr "" - -msgctxt "usr_STREET_ADDRESS" -msgid "Street address" -msgstr "" - -msgctxt "usr_CITY" -msgid "City" -msgstr "" - -msgctxt "usr_PHONE_NUMBER" -msgid "Phone number" -msgstr "" - -msgctxt "usr_EMAIL_DELIVERY" -msgid "Email delivery" -msgstr "" - -msgctxt "usr_DELIVER_EMAIL_LOCALLY" -msgid "Deliver email locally" -msgstr "" - -msgctxt "usr_FORWARD_EMAIL" -msgid "Forward email to address below" -msgstr "" - -msgctxt "usr_DELIVER_AND_FORWARD" -msgid "Both deliver locally and forward" -msgstr "" - -msgctxt "usr_FORWARDING_ADDRESS" -msgid "Forwarding address" -msgstr "" - -msgctxt "usr_GROUP_MEMBERSHIPS" -msgid "Group memberships" -msgstr "" - -msgctxt "usr_RESET_DESC" -msgid "You are about to change the password for the user account \"[_1]\" ([_2])" -msgstr "" - -msgctxt "usr_RESET_DESC2" -msgid "Enter the new password in the fields below" -msgstr "" - -msgctxt "usr_ERR_OCCURRED_MODIFYING_PASSWORD" -msgid "An error occurred while updating the password" -msgstr "" - -msgctxt "usr_PASSWORD_CHANGE_SUCCEEDED" -msgid "Successfully changed password for user \"[_1]\"." -msgstr "" - -msgctxt "usr_LOCK_DESC" -msgid "You are about to lock the user account \"[_1]\" ([_2])" -msgstr "" - -msgctxt "usr_LOCKED_ACCOUNT" -msgid "Successfully locked account for user \"[_1]\"." -msgstr "" - -msgctxt "usr_NO_SUCH_USER" -msgid "Error: the user account \"[_1]\" does not exist." -msgstr "" - -msgctxt "usr_PSEUDONYM_CLASH" -msgid "" -"Error: the pseudonym \"[_1]\" is already taken by the existing user account " -"\"[_1]\".To differentiate, add initials to this field." -msgstr "" - -msgctxt "usr_LOCK_ACCOUNT" -msgid "Lock account" -msgstr "" - -msgctxt "usr_LOCK_ACCOUNT_TITLE" -msgid "Lock user account" -msgstr "" - -msgctxt "usr_LOCK_DESC2" -msgid "" -"This user account will be locked. This means that this user will not be able" -" to log in, and will not be able to collect e-mail. Any e-mail arriving will" -" still be stored and/or forwarded to an external e-mail address, as " -"configured. The account may be activated in the future by setting a new " -"password. The current password will not be retained.

Are you sure " -"you wish to lock this account?" -msgstr "" - -msgctxt "usr_REMOVE_ACCOUNT_TITLE" -msgid "Remove user account" -msgstr "" - -msgctxt "usr_REMOVE_DESC" -msgid "You are about to remove the user account \"[_1]\" ([_2])" -msgstr "" - -msgctxt "usr_REMOVE_DESC2" -msgid "" -"All files belonging to this user account will be deleted. Also, any e-mail " -"for this user account still remaining on the server (i.e. that has not yet " -"been retrieved by the user) will be discarded.

Are you sure you " -"wish to remove this account?" -msgstr "" - -msgctxt "usr_LOCK" -msgid "Lock" -msgstr "" - -msgctxt "usr_NO_USER_ACCOUNTS" -msgid "There are no user accounts on this system." -msgstr "" - -msgctxt "Users" -msgid "Users" -msgstr "" - -msgctxt "usr_ACCT_NAME_HAS_INVALID_CHARS" -msgid "" -"The account name \"[_1]\" contains invalid characters. Account names must " -"start with a lower case letter and contain only lower case letters, numbers," -" hyphens, periods and underscores." -msgstr "" - -msgctxt "usr_ACCOUNT_TOO_LONG" -msgid "Error: account name is too long. The maximum is [_1] characters." -msgstr "" - -msgctxt "usr_ACCOUNT_CONFLICT" -msgid "" -"Error: the account \"[_1]\" can\\'t be created because there is already a " -"[_1] account of that name." -msgstr "" - -msgctxt "usr_ERR_OCCURRED_CREATING" -msgid "An error occurred creating the user." -msgstr "" - -msgctxt "usr_CANNOT_CONTAIN_WHITESPACE" -msgid "This field cannot contain white-space" -msgstr "" - -msgctxt "usr_UNACCEPTABLE_CHARS" -msgid "" -"This field must contain only letters, numbers, dots, hypens and underscores " -"and start with a letter" -msgstr "" - -msgctxt "usr_MEMBER" -msgid "Member?" -msgstr "" - -msgctxt "usr_VPN_CLIENT_ACCESS" -msgid "VPN Client Access" -msgstr "" - -msgctxt "usr_SYSTEM_PASSWORD_FORM_TITLE" -msgid "Change system password" -msgstr "" - -msgctxt "usr_SYSTEM_PASSWORD_DESCRIPTION" -msgid "" -"Certain services on this server installation require a username and password" -" (for example this web page for the server manager application). The " -"username is always admin. You can change the system password using the " -"fields below." -msgstr "" - -msgctxt "usr_SYSTEM_PASSWORD_UNPRINTABLES_IN_PASS" -msgid "Password must contain only printable characters" -msgstr "" - -msgctxt "usr_SYSTEM_PASSWORD_VERIFY_ERROR" -msgid "The two passwords are not identical." -msgstr "" - -msgctxt "usr_SYSTEM_PASSWORD_AUTH_ERROR" -msgid "The current password is incorrect." -msgstr "" - -msgctxt "usr_SYSTEM_PASSWORD_CHANGED" -msgid "The system password has been changed." -msgstr "" - -msgctxt "usr_CURRENT_SYSTEM_PASSWORD" -msgid "Current system password" -msgstr "" - -msgctxt "usr_NEW_SYSTEM_PASSWORD" -msgid "New system password" -msgstr "" - -msgctxt "usr_NEW_SYSTEM_PASSWORD_VERIFY" -msgid "New system password (verify)" -msgstr "" - -msgctxt "usr_LABEL_IPSECRW_DOWNLOAD" -msgid "Download digital certificate to IPSec client" -msgstr "" - -msgctxt "usr_ERR_OCCURRED_DELETING" -msgid "An error occurred while trying to delete the user." -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Userpassword/pofiles/userpassword_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Userpassword/pofiles/userpassword_en.po deleted file mode 100644 index 60b7e44..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Userpassword/pofiles/userpassword_en.po +++ /dev/null @@ -1,102 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "pwd_FIELDS_REQUIRED" -msgid "All fields are required" -msgstr "" - -msgctxt "pwd_ERROR_PASSWORD_CHANGE" -msgid "" -"An error occurred while attempting to change your password. Please make sure" -" that the old password entered is correct." -msgstr "" - -msgctxt "pwd_PASSWORD_CHANGE" -msgid "Change Password" -msgstr "" - -msgctxt "pwd_RESET_PASSWORD_TITLE" -msgid "Reset user password" -msgstr "" - -msgctxt "pwd_ACCOUNT_PASSWORD_CHANGE" -msgid "Change account password" -msgstr "" - -msgctxt "pwd_PASSWORD_VERIFY_NEW" -msgid "New password (verify):" -msgstr "" - -msgctxt "pwd_PASSWORD_NEW" -msgid "New password:" -msgstr "" - -msgctxt "pwd_PASSWORD_OLD" -msgid "Old password:" -msgstr "" - -msgctxt "pwd_PASSWORD_RESET" -msgid "Reset password" -msgstr "" - -msgctxt "pwd_ACCOUNT_NAME_INVALID" -msgid "The account name entered is invalid." -msgstr "" - -msgctxt "pwd_ACCOUNT_NAME_INVALID_CHARS" -msgid "The account name you entered contained invalid characters." -msgstr "" - -msgctxt "pwd_PASSWORD_OLD_INVALID_CHARS" -msgid "The old password you entered contained invalid characters." -msgstr "" - -msgctxt "pwd_PASSWORD_INVALID_CHARS" -msgid "The password you entered contained invalid characters." -msgstr "" - -msgctxt "pwd_PASSWORD_VERIFY_ERROR" -msgid "The new passwords you entered did not match." -msgstr "" - -msgctxt "pwd_ACCOUNT_USER_NONE" -msgid "There are no user accounts in the system." -msgstr "" - -msgctxt "pwd_ACCOUNT_GROUP_NONE" -msgid "There are no user groups in the system." -msgstr "" - -msgctxt "pwd_YOUR_ACCOUNT" -msgid "Your account:" -msgstr "" - -msgctxt "pwd_YOUR_ACCOUNT_INVALID" -msgid "The account name entered is invalid." -msgstr "" - -msgctxt "pwd_PASSWORD_CHANGE_SUCCESS" -msgid "Your password has been successfully changed." -msgstr "" - -msgctxt "pwd_DESCRIPTION" -msgid "" -"

To change your account password, please fill out the following form. You " -"will need to provide the name of your account, your old password, and your " -"desired new password. (You must type the new password twice.)

If you " -"cannot change your password because you have forgotten the old one, your " -"local system administrator can reset your password using the server " -"manager.

" -msgstr "" - -msgctxt "pwd_DESCRIPTION_RESET" -msgid "" -"

To reset your account password, please fill out the following form. You " -"will need to provide your desired new password. (You must type it " -"twice.)

In cas of problem, your local system administrator can reset " -"your password using the server manager.

" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Viewlogfiles/pofiles/viewlogfiles_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Viewlogfiles/pofiles/viewlogfiles_en.po deleted file mode 100644 index 076a4d6..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Viewlogfiles/pofiles/viewlogfiles_en.po +++ /dev/null @@ -1,111 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'log_FORM_TITLE'" -msgid "View log files" -msgstr "" - -msgctxt "log_FIRSTPAGE_DESC" -msgid "" -"This panel allows you to view or download the log files generated\n" -"by the services running on your server." -msgstr "" - -msgctxt "log_LOG_FILE_SELECT_DESC" -msgid "Choose a log file to view" -msgstr "" - -msgctxt "log_FILTER_PATTERN_DESC" -msgid "" -"You may optionally specify a filter pattern to display only the\n" -"lines from the log file which match this pattern.If you leave\n" -"this field blank, all available lines of the log file will be\n" -"displayed. Note that this option is not used if you download the\n" -"logfile." -msgstr "" - -msgctxt "log_FILTER_PATTERN_LABEL" -msgid "Filter Pattern (optional)" -msgstr "" - -msgctxt "log_MATCH_PATTERN_DESC" -msgid "" -"You may also optionally specify a highlight pattern to mark in bold\n" -"any lines from the log file which match the highlight pattern. The\n" -"highlight pattern is applied to any lines which have already\n" -"matched the filter pattern. Note that this option is not used if\n" -"you download the logfile." -msgstr "" - -msgctxt "log_MATCH_PATTERN_LABEL" -msgid "Highlight Pattern (optional)" -msgstr "" - -msgctxt "log_END_DESC" -msgid "" -"Please note that it may take quite some time to generate these\n" -"reports." -msgstr "" - -msgctxt "log_VIEW" -msgid "View log file" -msgstr "" - -msgctxt "log_LOG_FILE_EMPTY" -msgid "Log file \"[_1]\" is empty!" -msgstr "" - -msgctxt "log_VIEWING_TIME" -msgid "Viewed at [_1]." -msgstr "" - -msgctxt "log_MATCH_HEADER" -msgid "Displaying lines matching: \"[_1]\"." -msgstr "" - -msgctxt "log_HIGHLIGHT_HEADER" -msgid "Highlighting lines matching: \"[_1]\"." -msgstr "" - -msgctxt "log_NO_MATCHING_LINES" -msgid "No matching lines displayed." -msgstr "" - -msgctxt "log_FILENAME_ERROR" -msgid "" -"

Error while specifying log file name.

\n" -"

Invalid report type \"[_1]\".

" -msgstr "" - -msgctxt "log_REFRESH" -msgid "Refresh this logfile" -msgstr "" - -msgctxt "log_OP_DESC" -msgid "" -"You must choose between viewing the logfile in your browser, or\n" -"downloading the logfile to your computer. If the logfile is\n" -"particularly large, you may wish to download it instead of\n" -"attempting to open it in your browser, as this is a problem for\n" -"some web browsers." -msgstr "" - -msgctxt "log_OP_LABEL" -msgid "Operation" -msgstr "" - -msgctxt "log_DOWNLOAD_PAGE_DESC" -msgid "" -"Your logfile download is now prepared. It will proceed as soon\n" -"as you click on the "Next" button below, and instruct\n" -"your browser to accept the download via the pop-up window that\n" -"will appear." -msgstr "" - -msgctxt "log_DOWNLOAD_FILE" -msgid "Preparing to download the logfile [_1]." -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Workgroup/pofiles/workgroup_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Workgroup/pofiles/workgroup_en.po deleted file mode 100644 index 8d52da8..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Workgroup/pofiles/workgroup_en.po +++ /dev/null @@ -1,81 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'wkg_FORM_TITLE'" -msgid "Change workgroup settings" -msgstr "" - -msgctxt "wkg_DESC_WORKGROUP" -msgid "" -"Enter the name of the Windows workgroup that this server should appear in." -msgstr "" - -msgctxt "wkg_LABEL_WORKGROUP" -msgid "Windows workgroup" -msgstr "" - -msgctxt "wkg_DESC_SERVERNAME" -msgid "" -"Enter the name that this server should use for\n" -"Windows and Macintosh file sharing." -msgstr "" - -msgctxt "wkg_LABEL_SERVERNAME" -msgid "Server Name" -msgstr "" - -msgctxt "wkg_DESC_PDC" -msgid "" -"Should this server act as the workgroup\n" -"and domain controller on your Windows network? You should leave\n" -"this set to No if another server is already performing this\n" -"role on your network." -msgstr "" - -msgctxt "wkg_LABEL_PDC" -msgid "Workgroup and Domain Controller" -msgstr "" - -msgctxt "wkg_DESC_ROAM" -msgid "" -"Should this server support roaming profiles?\n" -"You should leave this set to the default of No unless you have\n" -"experience administering server-based Windows roaming profiles and\n" -"know that this feature is required." -msgstr "" - -msgctxt "wkg_LABEL_ROAM" -msgid "Roaming profiles" -msgstr "" - -msgctxt "wkg_SUCCESS" -msgid "The new workgroup settings have been saved" -msgstr "" - -msgctxt "wkg_INVALID_WORKGROUP" -msgid "" -"The workgroup name must begin with a letter (upper or lower\n" -"case), followed by any combination of letters, numbers,\n" -"underscores, periods and hyphens." -msgstr "" - -msgctxt "wkg_INVALID_SERVERNAME" -msgid "" -"The server name must begin with a letter (upper or lower case),\n" -"followed by any combination of letters, numbers, underscores and\n" -"hyphens." -msgstr "" - -msgctxt "wkg_INVALID_WORKGROUP_MATCHES_SERVERNAME" -msgid "" -"The server and workgroup names match, when compared in lower case. \n" -"These values must be different in order for filesharing to be turned on." -msgstr "" - -msgctxt "Workgroup" -msgid "Workgroup" -msgstr "" diff --git a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Yum/pofiles/yum_en.po b/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Yum/pofiles/yum_en.po deleted file mode 100644 index 375d37d..0000000 --- a/root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Yum/pofiles/yum_en.po +++ /dev/null @@ -1,225 +0,0 @@ -# -msgid "" -msgstr "" -"Project-Id-Version: 1.0\n" -"Language: en\n" -"Content-Type: text/plain; charset=utf-8\n" - -msgctxt "'yum_FORM_TITLE'" -msgid "Software installer" -msgstr "" - -msgctxt "yum_SUCCESS" -msgid "The new settings have been saved." -msgstr "" - -msgctxt "yum_LABEL_YUM_STATUS" -msgid "Check for updates" -msgstr "" - -msgctxt "yum_LABEL_YUM_AUTOINSTALLUPDATES" -msgid "Automatically install updates" -msgstr "" - -msgctxt "yum_DESC_YUM_AUTOINSTALLUPDATES" -msgid "" -"If enabled this will take precedence over the simple check for updates " -"notification and predownload features. Instead it will install the available" -" updates from enabled repositories. For more information refer to yum and " -"yum-cron manual page." -msgstr "" - -msgctxt "yum_LABEL_YUM_PACKAGEFUNCTIONS" -msgid "Manage individual packages" -msgstr "" - -msgctxt "yum_DESC_YUM_PACKAGEFUNCTIONS" -msgid "" -"The software installer can manage groups of \n" -"related package or individual packages. By \n" -"default, only groups of packages are presented.\n" -"If you wish to manage individual packages, \n" -"enable this option. This should only be done \n" -"by experienced administrators." -msgstr "" - -msgctxt "yum_LABEL_ENABLED_REPOSITORIES" -msgid "Enabled repositories" -msgstr "" - -msgctxt "yum_DESC_ENABLED_REPOSITORIES" -msgid "" -"The software installer can install software\n" -"from any of enabled repositories. To enable\n" -"a repository, select it from the list. \n" -"To disable a repository, de-select it from the list.\n" -"By default, only stable, tested software is available\n" -"for installation." -msgstr "" - -msgctxt "yum_TITLE_UPTODATE" -msgid "This system is up to date." -msgstr "" - -msgctxt "yum_DESC_UPTODATE" -msgid "All updates have been installed." -msgstr "" - -msgctxt "yum_TITLE_UPDATES_AVAILABLE" -msgid "Updates Available" -msgstr "" - -msgctxt "yum_DESC_UPDATES_AVAILABLE" -msgid "" -"There are updates available for your system. These updates \n" -"should be installed as soon as possible." -msgstr "" - -msgctxt "yum_LABEL_AVAILABLE_UPDATES" -msgid "Updates available" -msgstr "" - -msgctxt "yum_DESC_AVAILABLE_UPDATES" -msgid "" -"The following updates are available for your system. \n" -"You should normally install all available updates. \n" -"If there are updates you do not wish to install, de-select\n" -"them from the list below." -msgstr "" - -msgctxt "yum_INSTALL_UPDATES" -msgid "Install selected updates" -msgstr "" - -msgctxt "yum_BUTTON_INSTALL_UPDATES" -msgid "List available updates" -msgstr "" - -msgctxt "yum_HEADER_AVAILABLE_SOFTWARE" -msgid "" -"The following software is available to be installed \n" -"onto your system. You should only install additional\n" -"software onto this system if you are aware\n" -"of the consequences of doing so." -msgstr "" - -msgctxt "yum_DESC_AVAILABLE_GROUPS" -msgid "" -"You can select software groups\n" -"to install from the list below." -msgstr "" - -msgctxt "yum_LABEL_AVAILABLE_GROUPS" -msgid "Available groups" -msgstr "" - -msgctxt "yum_DESC_AVAILABLE_PACKAGES" -msgid "" -"You can also select individual packages \n" -"to install from the list below." -msgstr "" - -msgctxt "yum_LABEL_AVAILABLE_PACKAGES" -msgid "Available packages" -msgstr "" - -msgctxt "yum_INSTALL_SOFTWARE" -msgid "Install" -msgstr "" - -msgctxt "yum_HEADER_INSTALLED_SOFTWARE" -msgid "" -"The following software is installed \n" -"on this system. You should only remove\n" -"software from this system if you are aware\n" -"of the consequences of doing so." -msgstr "" - -msgctxt "yum_DESC_INSTALLED_GROUPS" -msgid "" -"You can select software groups\n" -"to remove from the list below." -msgstr "" - -msgctxt "yum_LABEL_INSTALLED_GROUPS" -msgid "Installed groups" -msgstr "" - -msgctxt "yum_DESC_INSTALLED_PACKAGES" -msgid "" -"You can also select individual packages \n" -"you wish to remove from the list below." -msgstr "" - -msgctxt "yum_LABEL_INSTALLED_PACKAGES" -msgid "Installed packages" -msgstr "" - -msgctxt "yum_BUTTON_CONFIGURATION" -msgid "Change software installer settings" -msgstr "" - -msgctxt "yum_BUTTON_INSTALL_AVAILABLE" -msgid "Install additional software" -msgstr "" - -msgctxt "yum_BUTTON_REMOVE" -msgid "Remove installed software" -msgstr "" - -msgctxt "yum_HEADER_POSTUPGRADE_REQUIRED" -msgid "" -"The system needs to be reconfigured\n" -" after adding or removing software,\n" -" or applying updates. \n" -"

\n" -"Please click on the Reconfigure button at the bottom of\n" -"this page to start the reconfiguration process.\n" -" An automatic reboot will be\n" -" initiated as part of this reconfiguration process\n" -"

" -msgstr "" - -msgctxt "yum_SYSTEM_BEING_RECONFIGURED" -msgid "" -"Your system is being automatically rebooted to \n" -"complete the reconfiguraton process." -msgstr "" - -msgctxt "yum_1DAILY" -msgid "Daily" -msgstr "" - -msgctxt "yum_2WEEKLY" -msgid "Weekly" -msgstr "" - -msgctxt "yum_3MONTHLY" -msgid "Monthly" -msgstr "" - -msgctxt "yum_LABEL_YUM_DELTARPMPROCESS" -msgid "Delta Rpm Update" -msgstr "" - -msgctxt "yum_DESC_YUM_DELTARPMPROCESS" -msgid "" -"A deltarpm contains the difference between an old and a new version of a rpm, \n" -" which can save bandwith. The drawback is that update \n" -" operations consume considerably more CPU cycles" -msgstr "" - -msgctxt "yum_LABEL_YUM_DOWNLOADONLY" -msgid "Predownload updates" -msgstr "" - -msgctxt "yum_DESC_YUM_DOWNLOADONLY" -msgid "" -"The rpm updates can be downloaded during the night, \n" -" this will ease and give faster the yum update process \n" -" (only enabled repositories will be used)." -msgstr "" - -msgctxt "yum_UPDATE_SUCCESS" -msgid "The requested changes have been successfully implemented." -msgstr ""