Brian Read
c8ce77259d
- Adding SM2 panel [SME: 13004] - Upgrade to phpsysinfo 3.4.4 - Add code to delete inline styles and add css to make it look better. - version saved / built uses the static version, which means no drops downs and choices.
411 lines
11 KiB
Plaintext
411 lines
11 KiB
Plaintext
Generating detailed summary of the adapter, it may take a while to complete.
|
|
|
|
|
|
Controller = 0
|
|
Status = Success
|
|
Description = None
|
|
|
|
Basics :
|
|
======
|
|
Controller = 0
|
|
Model = ServeRAID M5210
|
|
Serial Number = SV54341012
|
|
Current Controller Date/Time = 09/23/2016, 15:04:05
|
|
Current System Date/time = 09/23/2016, 15:04:05
|
|
SAS Address = 500605b00b3ee5e0
|
|
PCI Address = 00:01:00:00
|
|
Mfg Date = 10/28/15
|
|
Rework Date = 00/00/00
|
|
Revision No = 04D
|
|
|
|
|
|
Version :
|
|
=======
|
|
Firmware Package Build = 24.12.0-0024
|
|
Firmware Version = 4.620.00-6070
|
|
BIOS Version = 6.30.03.0_4.17.08.00_0x06130200
|
|
NVDATA Version = 3.1511.00-0009
|
|
Ctrl-R Version = 5.15-1002
|
|
Preboot CLI Version = 01.07-05:#%0000
|
|
Boot Block Version = 3.07.00.00-0003
|
|
Driver Name = megasas2.sys
|
|
Driver Version = 6.710.15.00
|
|
|
|
|
|
Bus :
|
|
===
|
|
Vendor ID = 0x1000
|
|
Device ID = 0x5D
|
|
SubVendor ID = 0x1014
|
|
SubDevice ID = 0x454
|
|
Host Interface = PCIE
|
|
Device Interface = SAS-12G
|
|
Bus Number = 1
|
|
Device Number = 0
|
|
Function Number = 0
|
|
|
|
|
|
Pending Images in Flash :
|
|
=======================
|
|
Image name = No pending images
|
|
|
|
|
|
Status :
|
|
======
|
|
Controller Status = Optimal
|
|
Memory Correctable Errors = 0
|
|
Memory Uncorrectable Errors = 0
|
|
ECC Bucket Count = 0
|
|
Any Offline VD Cache Preserved = No
|
|
BBU Status = 0
|
|
Support PD Firmware Download = No
|
|
Lock Key Assigned = No
|
|
Failed to get lock key on bootup = No
|
|
Lock key has not been backed up = No
|
|
BIOS was not detected during boot = No
|
|
Controller must be rebooted to complete security operation = No
|
|
A rollback operation is in progress = No
|
|
At least one PFK exists in NVRAM = No
|
|
SSC Policy is WB = No
|
|
Controller has booted into safe mode = No
|
|
|
|
|
|
Supported Adapter Operations :
|
|
============================
|
|
Rebuild Rate = Yes
|
|
CC Rate = Yes
|
|
BGI Rate = Yes
|
|
Reconstruct Rate = Yes
|
|
Patrol Read Rate = Yes
|
|
Alarm Control = No
|
|
Cluster Support = No
|
|
BBU = Yes
|
|
Spanning = Yes
|
|
Dedicated Hot Spare = Yes
|
|
Revertible Hot Spares = Yes
|
|
Foreign Config Import = Yes
|
|
Self Diagnostic = Yes
|
|
Allow Mixed Redundancy on Array = No
|
|
Global Hot Spares = Yes
|
|
Deny SCSI Passthrough = No
|
|
Deny SMP Passthrough = No
|
|
Deny STP Passthrough = No
|
|
Support more than 8 Phys = Yes
|
|
firmware and Event Time in GMT = No
|
|
Support Enhanced Foreign Import = Yes
|
|
Support Enclosure Enumeration = Yes
|
|
Support Allowed Operations = Yes
|
|
Abort CC on Error = Yes
|
|
Support Multipath = Yes
|
|
Support Odd and Even Drive count in RAID1E = No
|
|
Support Security = Yes
|
|
Support Config Page Model = Yes
|
|
Support the OCE without adding drives = Yes
|
|
support EKM = Yes
|
|
Snapshot Enabled = No
|
|
Support PFK = Yes
|
|
Support PI = Yes
|
|
Support LDPI Type1 = No
|
|
Support LDPI Type2 = No
|
|
Support LDPI Type3 = No
|
|
Support Ld BBM Info = No
|
|
Support Shield State = Yes
|
|
Block SSD Write Disk Cache Change = Yes
|
|
Support Suspend Resume BG ops = Yes
|
|
Support Emergency Spares = Yes
|
|
Support Set Link Speed = Yes
|
|
Support Boot Time PFK Change = Yes
|
|
Support JBOD = Yes
|
|
Disable Online PFK Change = Yes
|
|
Support Perf Tuning = Yes
|
|
Support SSD PatrolRead = Yes
|
|
Real Time Scheduler = Yes
|
|
Support Reset Now = Yes
|
|
Support Emulated Drives = Yes
|
|
Headless Mode = Yes
|
|
Dedicated HotSpares Limited = No
|
|
Point In Time Progress = Yes
|
|
Extended LD = Yes
|
|
|
|
|
|
Supported PD Operations :
|
|
=======================
|
|
Force Online = Yes
|
|
Force Offline = Yes
|
|
Force Rebuild = Yes
|
|
Deny Force Failed = No
|
|
Deny Force Good/Bad = No
|
|
Deny Missing Replace = No
|
|
Deny Clear = No
|
|
Deny Locate = No
|
|
Support Power State = No
|
|
Set Power State For Cfg = No
|
|
Support T10 Power State = No
|
|
Support Temperature = Yes
|
|
NCQ = Yes
|
|
|
|
|
|
Supported VD Operations :
|
|
=======================
|
|
Read Policy = Yes
|
|
Write Policy = Yes
|
|
I/O Policy = Yes
|
|
Access Policy = Yes
|
|
Disk Cache Policy = Yes
|
|
Reconstruction = Yes
|
|
Deny Locate = No
|
|
Deny CC = No
|
|
Allow Ctrl Encryption = No
|
|
Enable LDBBM = No
|
|
Support FastPath = No
|
|
Performance Metrics = Yes
|
|
Power Savings = No
|
|
Support Powersave Max With Cache = No
|
|
Support Breakmirror = Yes
|
|
Support SSC WriteBack = No
|
|
Support SSC Association = No
|
|
|
|
|
|
Advanced Software Option part number :
|
|
========================
|
|
|
|
--------------------------------------------
|
|
Adv S/W Opt Time Remaining Mode
|
|
--------------------------------------------
|
|
MegaRAID SafeStore Unlimited Secured
|
|
MegaRAID RAID5 Unlimited Secured
|
|
--------------------------------------------
|
|
|
|
Safe ID = XCR9FXJX6PQ866ND56BJ86DU5V7CQ8XG4NQAKDRZ
|
|
|
|
HwCfg :
|
|
=====
|
|
ChipRevision = C0
|
|
BatteryFRU = N/A
|
|
Front End Port Count = 0
|
|
Backend Port Count = 8
|
|
BBU = Present
|
|
Alarm = Missing
|
|
Serial Debugger = Present
|
|
NVRAM Size = 32KB
|
|
Flash Size = 32MB
|
|
On Board Memory Size = 1024MB
|
|
On Board Expander = Absent
|
|
Temperature Sensor for ROC = Present
|
|
Temperature Sensor for Controller = Absent
|
|
Current Size of CacheCade (GB) = 0
|
|
Current Size of firmware Cache (MB) = 651
|
|
ROC temperature(Degree Celcius) = 72
|
|
|
|
|
|
Policies :
|
|
========
|
|
|
|
Policies Table :
|
|
==============
|
|
|
|
------------------------------------------------
|
|
Policy Current Default
|
|
------------------------------------------------
|
|
Predictive Fail Poll Interval 300 sec
|
|
Interrupt Throttle Active Count 16
|
|
Interrupt Throttle Completion 50 us
|
|
Rebuild Rate 30 % 30%
|
|
PR Rate 30 % 30%
|
|
BGI Rate 30 % 30%
|
|
Check Consistency Rate 30 % 30%
|
|
Reconstruction Rate 30 % 30%
|
|
Cache Flush Interval 0s
|
|
------------------------------------------------
|
|
|
|
Flush Time(Default) = 4s
|
|
Drive Coercion Mode = 1GB
|
|
Auto Rebuild = On
|
|
Battery Warning = On
|
|
ECC Bucket Size = 15
|
|
ECC Bucket Leak Rate (hrs) = 24
|
|
Restore HotSpare on Insertion = Off
|
|
Expose Enclosure Devices = On
|
|
Maintain PD Fail History = On
|
|
Reorder Host Requests = On
|
|
Auto detect BackPlane = SGPIO/i2c SEP
|
|
Load Balance Mode = Auto
|
|
Security Key Assigned = Off
|
|
Disable Online Controller Reset = Off
|
|
Use drive activity for locate = Off
|
|
|
|
|
|
Boot :
|
|
====
|
|
BIOS Enumerate VDs = 1
|
|
Stop BIOS on Error = On
|
|
Delay during POST = 0
|
|
Spin Down Mode = None
|
|
Enable Ctrl-R = No
|
|
Enable Web BIOS = No
|
|
Enable PreBoot CLI = No
|
|
Enable BIOS = Yes
|
|
Max Drives to Spinup at One Time = 2
|
|
Maximum number of direct attached drives to spin up in 1 min = 10
|
|
Delay Among Spinup Groups (sec) = 12
|
|
Allow Boot with Preserved Cache = Off
|
|
|
|
|
|
High Availability :
|
|
=================
|
|
Topology Type = None
|
|
Cluster Permitted = No
|
|
Cluster Active = No
|
|
|
|
|
|
Defaults :
|
|
========
|
|
Phy Polarity = 0
|
|
Phy PolaritySplit = 0
|
|
Strip Size = 256kB
|
|
Write Policy = WB
|
|
Read Policy = Adaptive
|
|
Cache When BBU Bad = Off
|
|
Cached I/O = Off
|
|
VD PowerSave Policy = Controller Defined
|
|
Default spin down time (mins) = 30
|
|
Coercion Mode = 1 GB
|
|
ZCR Config = Unknown
|
|
Max Chained Enclosures = 16
|
|
Direct PD Mapping = No
|
|
Restore Hot Spare on Insertion = No
|
|
Expose Enclosure Devices = Yes
|
|
Maintain PD Fail History = Yes
|
|
Zero Based Enclosure Enumeration = No
|
|
Disable Puncturing = Yes
|
|
EnableLDBBM = No
|
|
Un-Certified Hard Disk Drives = Allow
|
|
SMART Mode = Mode 6
|
|
Enable LED Header = No
|
|
LED Show Drive Activity = Yes
|
|
Dirty LED Shows Drive Activity = No
|
|
EnableCrashDump = Yes
|
|
Disable Online Controller Reset = No
|
|
Treat Single span R1E as R10 = No
|
|
Power Saving Option part number = Disabled
|
|
TTY Log In Flash = No
|
|
Auto Enhanced Import = Yes
|
|
BreakMirror RAID Support = Yes
|
|
Disable Join Mirror = No
|
|
Enable Shield State = Yes
|
|
Time taken to detect CME = 60 sec
|
|
|
|
|
|
Capabilities :
|
|
============
|
|
Supported Drives = SAS, SATA
|
|
Boot Volume Supported = NO
|
|
RAID Level Supported = RAID0, RAID1, RAID5, RAID00, RAID10, RAID50,
|
|
PRL 11, PRL 11 with spanning, SRL 3 supported,
|
|
PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span
|
|
Enable JBOD = No
|
|
Mix in Enclosure = Allowed
|
|
Mix of SAS/SATA of HDD type in VD = Not Allowed
|
|
Mix of SAS/SATA of SSD type in VD = Not Allowed
|
|
Mix of SSD/HDD in VD = Not Allowed
|
|
SAS Disable = No
|
|
Max Arms Per VD = 32
|
|
Max Spans Per VD = 8
|
|
Max Arrays = 128
|
|
Max VD per array = 64
|
|
Max Number of VDs = 64
|
|
Max Parallel Commands = 928
|
|
Max SGE Count = 60
|
|
Max Data Transfer Size = 8192 sectors
|
|
Max Strips PerIO = 128
|
|
Max Configurable CacheCade Size = 0
|
|
Min Strip Size = 64 KB
|
|
Max Strip Size = 1.0 MB
|
|
|
|
|
|
Scheduled Tasks :
|
|
===============
|
|
Consistency Check Reoccurrence = 168 hrs
|
|
Next Consistency check launch = 09/24/2016, 02:59:53
|
|
Patrol Read Reoccurrence = 168 hrs
|
|
Next Patrol Read launch = 09/24/2016, 02:59:53
|
|
Battery learn Reoccurrence = 672 hrs
|
|
Next Battery Learn = 10/06/2016, 14:28:32
|
|
OEMID = IBM
|
|
|
|
Drive Groups = 1
|
|
|
|
TOPOLOGY :
|
|
========
|
|
|
|
--------------------------------------------------------------------------
|
|
DG Arr Row EID:Slot DID Type State BT Size PDC PI SED DS3 FSpace
|
|
--------------------------------------------------------------------------
|
|
0 - - - - RAID5 Optl N 4.087 TB dsbl N N none N
|
|
0 0 - - - RAID5 Optl N 4.087 TB dsbl N N none N
|
|
0 0 0 252:5 7 DRIVE Onln N 837.258 GB dsbl N N none -
|
|
0 0 1 252:4 8 DRIVE Onln N 837.258 GB dsbl N N none -
|
|
0 0 2 252:1 10 DRIVE Onln N 837.258 GB dsbl N N none -
|
|
0 0 3 252:6 11 DRIVE Onln N 837.258 GB dsbl N N none -
|
|
0 0 4 252:2 12 DRIVE Onln N 837.258 GB dsbl N N none -
|
|
0 0 5 252:3 13 DRIVE Onln N 837.258 GB dsbl N N none -
|
|
--------------------------------------------------------------------------
|
|
|
|
DG=Disk Group Index|Arr=Array Index|Row=Row Index|EID=Enclosure Device ID
|
|
DID=Device ID|Type=Drive Type|Onln=Online|Rbld=Rebuild|Dgrd=Degraded
|
|
Pdgd=Partially degraded|Offln=Offline|BT=Background Task Active
|
|
PDC=PD Cache|PI=Protection Info|SED=Self Encrypting Drive|Frgn=Foreign
|
|
DS3=Dimmer Switch 3|dflt=Default|Msng=Missing|FSpace=Free Space Present
|
|
|
|
Virtual Drives = 1
|
|
|
|
VD LIST :
|
|
=======
|
|
|
|
---------------------------------------------------------
|
|
DG/VD TYPE State Access Consist Cache sCC Size Name
|
|
---------------------------------------------------------
|
|
0/0 RAID5 Optl RW Yes RWBD - 4.087 TB
|
|
---------------------------------------------------------
|
|
|
|
Cac=CacheCade|Rec=Recovery|OfLn=OffLine|Pdgd=Partially Degraded|dgrd=Degraded
|
|
Optl=Optimal|RO=Read Only|RW=Read Write|B=Blocked|Consist=Consistent|
|
|
R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack|
|
|
AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled
|
|
Check Consistency
|
|
|
|
Physical Drives = 7
|
|
|
|
PD LIST :
|
|
=======
|
|
|
|
-------------------------------------------------------------------------
|
|
EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp
|
|
-------------------------------------------------------------------------
|
|
252:0 9 GHS - 837.258 GB SAS HDD N N 512B ST900MM0168 U
|
|
252:1 10 Onln 0 837.258 GB SAS HDD N N 512B ST900MM0168 U
|
|
252:2 12 Onln 0 837.258 GB SAS HDD N N 512B AL14SEB090N U
|
|
252:3 13 Onln 0 837.258 GB SAS HDD N N 512B AL14SEB090N U
|
|
252:4 8 Onln 0 837.258 GB SAS HDD N N 512B AL14SEB090N U
|
|
252:5 7 Onln 0 837.258 GB SAS HDD N N 512B AL14SEB090N U
|
|
252:6 11 Onln 0 837.258 GB SAS HDD N N 512B AL14SEB090N U
|
|
-------------------------------------------------------------------------
|
|
|
|
EID-Enclosure Device ID|Slt-Slot No.|DID-Device ID|DG-DriveGroup
|
|
DHS-Dedicated Hot Spare|UGood-Unconfigured Good|GHS-Global Hotspare
|
|
UBad-Unconfigured Bad|Onln-Online|Offln-Offline|Intf-Interface
|
|
Med-Media Type|SED-Self Encryptive Drive|PI-Protection Info
|
|
SeSz-Sector Size|Sp-Spun|U-Up|D-Down|T-Transition|F-Foreign
|
|
UGUnsp-Unsupported|UGShld-UnConfigured shielded|HSPShld-Hotspare shielded
|
|
CFShld-Configured shielded
|
|
|
|
|
|
Cachevault_Info :
|
|
===============
|
|
|
|
------------------------------------
|
|
Model State Temp Mode MfgDate
|
|
------------------------------------
|
|
CVPM02 Optimal 28C - 2016/01/09
|
|
------------------------------------
|