* Mon Mar 17 2025 Brian Read <brianr@koozali.org> 11.0.0-67.sme

- re-write qmailanalog for postfix [SME: 12951]
- Clean up backup.pm
- Enhance module panel - used by mail log analysis and Licence display

root/usr/lib/systemd/system/bootsequence.service

@@ -0,0 +1,9 @@
+[Unit]
+Description=Koozali SME Server boot diagnostic tool
+After=sme-server.target
+PartOf=sme-server.target
+
+[Service]
+Type=oneshot
+ExecStart=/bin/sh -c "/usr/bin/systemd-analyze plot > /usr/share/smanager/themes/default/public/images/boot.svg"
+RemainAfterExit=yes

root/usr/share/smanager/lib/SrvMngr/Controller/Backup.pm

@@ -32,6 +32,10 @@ use esmith::util;
 use esmith::lockfile;
 use esmith::BlockDevices;
 use constant DEBUG => $ENV{MOJO_SMANAGER_DEBUG} || 0;
+
+use constant FALSE => 0;
+use constant TRUE  => 1;
+
 #our $cdb = esmith::ConfigDB->open   || die "Couldn't open config db"; #remove as cached gives problems
 #our $adb = esmith::AccountsDB->open || die "Couldn't open accounts db";
 #our $rdb = esmith::ConfigDB->open('/etc/e-smith/restore') || die "Couldn't open restore db";
@@ -526,13 +530,13 @@ sub do_update {
 
     # common part for all functions
     if ($res ne 'OK') {
-
         if ($res eq 'NEXT') {
             $dest = 'back_' . $bac_datas{"function"};
         } else {
             $c->stash(error => $result);
             $dest = "back_$function";
         }
+        $bac_datas{vfstype}        = $c->param('VFSType');
         $c->stash(title => $title, bac_datas => \%bac_datas);
         return $c->render($dest);
     } ## end if ($res ne 'OK')
@@ -932,7 +936,7 @@ sub workstnVerify {
 
 sub workstnRestore {
     my ($c) = @_;
-    my $out;
+    my $out = '';
     my $restoreref = $c->param('Backupset');
     my $set        = $restoreref;
     $set =~ s/\/[^\/]*$//;
@@ -1015,6 +1019,7 @@ sub workstnRestore {
         return "$c->l('bac_OPERATION_STATUS_REPORT') $c->l('bac_ERR_PRE_RESTORE')";
     }
     $| = 1;
+    my $RD;
 
     if (open(RD, "-|")) {
 
@@ -1047,8 +1052,8 @@ sub workstnRestore {
                     or warn($c->l('bac_ERR_RESTORING_INITIAL_GRP') . "\n");
                 esmith::util::backgroundCommand(0, "/sbin/e-smith/signal-event", "post-upgrade");
 
-                #	system("/sbin/e-smith/signal-event", "post-upgrade") == 0
-                #	    or die ($c->l('bac_ERROR_UPDATING_CONFIGURATION')."\n");
+                	#system("/sbin/e-smith/signal-event", "post-upgrade") == 0 
+                	#    or die ($c->l('bac_ERROR_UPDATING_CONFIGURATION')."\n");
             } else {
                 $message = $c->l('bac_RESTORE_FAILED');
             }
@@ -1076,9 +1081,111 @@ sub workstnRestore {
         die($error_message) if $error_message;
         exit(0);
     } ## end else [ if (open(RD, "-|")) ]
-    $rdb->reload;
-    $error_message .= $c->bunmount($mntdir, $VFSType);
-    return '#OK#' . $out;
+    
+	#my $RD;
+
+	## Fork-safe open with explicit error handling
+	#unless (open($RD, "-|")) {
+		## Child process
+		#local $SIG{__DIE__} = sub { exit 255 };
+		#$| = 1;  # Autoflush
+
+		#eval {
+			#foreach my $file (@restorefiles) {
+				## Security: strict filename validation
+				#unless ($file =~ m{^[\w\/.-]+$}) {
+					#die "Invalid filename: $file";
+				#}
+				
+				## Check file existence
+				#unless (-e $file) {
+					#die "Backup file $file does not exist";
+				#}
+
+				## Execute dar with error checking
+				#system("/usr/bin/dar", "-Q", "-x", $file, "-v", "-N", "-R", "/", "-wa");
+				#if ($? == -1) {
+					#die "Failed to execute dar: $!";
+				#} elsif ($? & 127) {
+					#die sprintf("dar died with signal %d, %s coredump",
+						#($? & 127), ($? & 128) ? 'with' : 'without');
+				#} elsif ($? >> 8 != 0) {
+					#die "dar exited with error code " . ($? >> 8);
+				#}
+			#}
+
+			## Unmount with error checking
+			#if (my $unmount_err = $c->bunmount($mntdir, $VFSType)) {
+				#die "Unmount failed: $unmount_err";
+			#}
+		#};
+
+		#if (my $child_err = $@) {
+			#print STDERR "CHILD ERROR: $child_err";
+			#exit 254;
+		#}
+		#exit 0;
+	#} 
+	#else {
+		## Parent process
+		#eval {
+			## Verify fork succeeded
+			#unless (defined $RD) {
+				#die "Fork failed: $!";
+			#}
+
+			#$out .= $c->l('bac_FILES_HAVE_BEEN_RESTORED') . "\n<UL>";
+			#my $complete = 0;
+
+			## Read from child process
+			#while (<$RD>) {
+				#$complete++ if /etc\/samba\/smbpasswd$/;
+				#$out .= "<li>$_</li>\n";
+			#}
+			#$out .= "</UL>";
+
+			## Close pipe and check status
+			#unless (close $RD) {
+				#die "Pipe close failed: $!";
+			#}
+
+			#my $child_status = $?;
+			#if ($child_status != 0) {
+				#die "Child process failed with status " . ($child_status >> 8);
+			#}
+
+			## Post-restore actions
+			#if ($complete) {
+				#system("/usr/sbin/groupmod", "-g", $www_gid, "www");
+				#if ($? != 0) {
+					#die $c->l('bac_ERR_RESTORING_GID') . ": $! (status $?)";
+				#}
+
+				#system("/usr/sbin/usermod", "-g", $www_gid, "www");
+				#if ($? != 0) {
+					#die $c->l('bac_ERR_RESTORING_INITIAL_GRP') . ": $! (status $?)";
+				#}
+
+				#my $bg_result = esmith::util::backgroundCommand(0, "/sbin/e-smith/signal-event", "post-upgrade");
+				#unless ($bg_result) {
+					#die "Failed to schedule post-upgrade event";
+				#}
+			#} else {
+				#die $c->l('bac_RESTORE_FAILED');
+			#}
+		#};
+
+		## Error handling
+		#if (my $err = $@) {
+			#$rec->set_prop('state', 'failed');
+			#$rec->set_prop('error', "$err");
+			#esmith::lockfile::UnlockFile($file_handle);
+			#return $c->l('bac_RESTORE_FAILED_MSG') . ": $err";
+		#}
+	#}       
+	$rdb->reload;
+	$error_message .= $c->bunmount($mntdir, $VFSType);
+	return '#OK#' . $out;
 } ## end sub workstnRestore
 
 sub workstnSelRestore() {
@@ -1455,6 +1562,7 @@ sub performReboot {
 
     #print "$c->l('bac_SERVER_REBOOT')";
     #print "$c->l('bac_SERVER_WILL_REBOOT')";
+    warn "reboot coming";
     esmith::util::backgroundCommand(2, "/sbin/e-smith/signal-event", "reboot");
     return "#OK#" . $c->l('bac_SERVER_WILL_REBOOT');
 } ## end sub performReboot
@@ -1985,7 +2093,7 @@ sub bunmount {
         system('/bin/umount', '-f', $mount) == 0
             or return ($c->l('bac_ERR_WHILE_UNMOUNTING'));
     }
-    return;
+    return "";
 } ## end sub bunmount
 
 sub findmnt {

root/usr/share/smanager/lib/SrvMngr/Controller/Bugreport.pm

@@ -17,6 +17,9 @@ use File::Basename;
 use SrvMngr qw( gen_locale_date_string );
 our $cdb = esmith::ConfigDB->open or die "Couldn't open ConfigDB\n";
 
+use constant FALSE => 0;
+use constant TRUE  => 1;
+
 # Get some basic info on the current SME install
 our $sysconfig          = $cdb->get('sysconfig');
 our $systemmode         = $cdb->get('SystemMode')->value;
@@ -78,7 +81,7 @@ sub create_configuration_report {
     # create the reporting template
     my $configreport_template = Text::Template->new(
         TYPE    => 'FILE',
-        SOURCE  => '/etc/e-smith/web/common/configuration_report.tmpl',
+        SOURCE  => '/usr/share/smanager/themes/default/public/configuration_report.tmpl',
         UNTAINT => 1
     );
     my $report_creation_time = gen_locale_date_string;
@@ -114,13 +117,40 @@ sub create_configuration_report {
 
     # prcess template
     my $result = $configreport_template->fill_in(HASH => \%vars);
+    
+    #take out any multiple blank lines
+    #$result =~ s/\n{3,}/\n/g;
+    
 
     # write processed template to file
     open(my $cfgrep, '>', $configreportfile) or die "Could not create temporary file for config report!";
     print $cfgrep $result;
     close $cfgrep;
+    
+    #check if boot phase has completed.
+	if (wait_for_boot_completion()) {
+		#And create boot analysis image - now run externally following boot.
+		$result = `/usr/bin/systemctl start bootsequence.service`;
+		if (!$? == 0) {
+			warn "/usr/bin/systemd-analyze plot Command failed \n";
+		}
+	}
+  
 } ## end sub create_configuration_report
 
+sub wait_for_boot_completion {
+    my $timeout = 60;  # 1-minute timeout
+    my $end_time = time() + $timeout;
+    while (time() < $end_time) {
+        if (`systemctl list-jobs 2>&1` =~ /No jobs running/) {
+            return TRUE;  # Success
+        }
+        sleep 5;
+    }
+    warn "Boot did not complete within $timeout seconds.\n";
+    return FALSE;  # Failure
+} ## end wait_for_boot_completion
+
 sub show_config_report {
     my $c   = shift;
     my $out = '';
@@ -143,4 +173,4 @@ sub download_config_report {
         'cleanup'             => 1,
     );
 } ## end sub download_config_report
-1;
+1;

root/usr/share/smanager/lib/SrvMngr/Controller/Qmailanalog.pm

@@ -14,6 +14,9 @@ use SrvMngr qw(gen_locale_date_string);
 use Locale::gettext;
 use SrvMngr::I18N;
 use SrvMngr qw(theme_list init_session);
+use List::Util qw(sum); 
+
+#use Mail::Log::Trace::Postfix;
 
 sub main {
     my $c = shift;
@@ -48,44 +51,63 @@ sub generateReport {
     my $c           = shift;
     my $report_type = shift;
     my $out         = '';
-
     #------------------------------------------------------------
-    # Looks good; go ahead and generate the report.
+    # Go ahead and generate the report.
     #------------------------------------------------------------
-    #	$| = 1;
     my $now_string = $c->gen_locale_date_string();
+    my $log_path = '/var/log/maillog';
     $out .= sprintf("<h3>%s %s </h3>", $c->l('REPORT_GENERATED'), $now_string);
-
-    if ($report_type =~ /^qmail-q/) {
-        open(QMAILQUEUEREPORT, "/var/qmail/bin/$report_type |");
-        $out .= sprintf "<pre>";
-
-        while (<QMAILQUEUEREPORT>) {
-            $out .= sprintf("%s", $_);
-        }
-        close QMAILQUEUEREPORT;
-        $out .= sprintf "</pre>";
-        $out .= sprintf("<h3>%s</h3>", $c->l('END_OF_REPORT'));
-        return '';
-    } ## end if ($report_type =~ /^qmail-q/)
-    chdir "/var/log/qmail";
-    open(QMAILANALOG,
-              "/bin/cat \@* current 2>/dev/null"
-            . "| /usr/local/bin/tai64nunix"
-            . "| /usr/local/qmailanalog/bin/matchup 5>/dev/null"
-            . "| /usr/local/qmailanalog/bin/$report_type |");
     $out .= sprintf "<pre>";
+    # Get the selected report from the form submission
+    my $selected_report = $report_type;
 
-    while (<QMAILANALOG>) {
+    # Call the relevant report sub based on the selection
+    if ($selected_report eq 'daily_summary') {
+        $out .= daily_summary_report($log_path);  
+    }
+    elsif ($selected_report eq 'daily_summary_today') {
+        $out .= daily_summary_report_today($log_path);  
+    }
+    elsif ($selected_report eq 'top_senders') {
+        $out .= top_senders_and_recipients($log_path);  
+    }
+    elsif ($selected_report eq 'bounce_analysis') {
+        $out .= bounce_rate_analysis($log_path);  
+    }
+    elsif ($selected_report eq 'spam_and_virus') {
+        $out .= spam_and_virus_filter_report($log_path);  
+    }
+    elsif ($selected_report eq 'delivery_status') {
+        $out .= delivery_status_report($log_path);  
+    }
+    elsif ($selected_report eq 'geo_analysis') {
+        $out .= geographical_analysis_of_email($log_path);  
+    }
+    elsif ($selected_report eq 'traffic_analysis') {
+        $out .= traffic_analysis($log_path);  
+    }
+    elsif ($selected_report eq 'auth_analysis') {
+        $out .= authentication_analysis($log_path);  
+    }
+    elsif ($selected_report eq 'user_activity') {
+        $out .= user_activity_report($log_path);  
+    }
+    elsif ($selected_report eq 'error_reporting') {
+        $out .= error_reporting($log_path);  
+    }
+    elsif ($selected_report eq 'comparison_reports') {
+        $out .= comparison_reports($log_path, '/var/log/mail.log.1');
+    }
+    elsif ($selected_report eq 'customized_reports') {
+        $out .= customized_reports($log_path);  
+    }
+    else {
+        $out .= 'Invalid report selected';
+    }
 
-        # Cook any special HTML characters
-        s/\&/\&amp;/g;
-        s/\"/\&quot;/g;
-        s/\>/\&gt;/g;
-        s/\</\&lt;/g;
-        $out .= sprintf("%s", $_);
-    } ## end while (<QMAILANALOG>)
-    close QMAILANALOG;
+    # The $output variable now contains the generated report output.
+    # Further processing can be done here, or you can render it later.
+  
     $out .= sprintf "</pre>";
     $out .= sprintf("<h3>%s</h3>", $c->l('END_OF_REPORT'));
     return $out;
@@ -94,22 +116,236 @@ sub generateReport {
 sub reportType_list {
     my $c     = shift;
     my @array = (
-
-        #        [ $c->l('qma_LIST_OUTGOING') => 'qmail-qread' ],
-        #        [ $c->l('qma_SUMMARIZE_QUEUE') => 'qmail-qstat' ],
-        [ $c->l('qma_SUCCESSFUL_DELIVERY_DELAY') => 'zddist' ],
-        [ $c->l('qma_REASONS_DEFERRAL')          => 'zdeferrals' ],
-        [ $c->l('qma_REASONS_FAILURE')           => 'zfailures' ],
-        [ $c->l('qma_BASIC_STATS')               => 'zoverall' ],
-        [ $c->l('qma_RECIP_STATS')               => 'zrecipients' ],
-        [ $c->l('qma_RECIP_HOSTS')               => 'zrhosts' ],
-        [ $c->l('qma_RECIP_ORDERED')             => 'zrxdelay' ],
-        [ $c->l('qma_SENDER_STATS')              => 'zsenders' ],
-        [ $c->l('qma_SENDMAIL_STYLE')            => 'zsendmail' ],
-        [ $c->l('qma_REASONS_SUCCESS')           => 'zsuccesses' ],
-        [ $c->l('qma_SENDER_UIDS')               => 'zsuids' ]
-    );
+		[$c->l('qma_Daily_Summary_Report_yesterday') => 'daily_summary'],
+		[$c->l('qma_Daily_Summary_Report_today') => 'daily_summary_today'],
+		#[$c->l('qma_Top Senders and Recipients') => 'top_senders'],
+		#[$c->l('qma_Bounce Rate Analysis') => 'bounce_analysis'],
+		#[$c->l('qma_Spam and Virus Filtering Report') => 'spam_and_virus'],
+		#[$c->l('qma_Delivery Status Report') => 'delivery_status'],
+		#[$c->l('qma_Geographic Analysis of Email') => 'geo_analysis'],
+		#[$c->l('qma_Traffic Analysis') => 'traffic_analysis'],
+		#[$c->l('qma_Authentication Analysis') => 'auth_analysis'],
+		#[$c->l('qma_User Activity Report') => 'user_activity'],
+		#[$c->l('qma_Error Reporting') => 'error_reporting'],
+		#[$c->l('qma_Comparison Reports') => 'comparison_reports'],
+		#[$c->l('qma_Customized Reports') => 'customized_reports'],
+	);
     my @sorted_array = sort { $a->[0] cmp $b->[0] } @array;
     return \@sorted_array;
 } ## end sub reportType_list
-1;
+
+sub daily_summary_report {
+    my $log_file = shift;  # Path to log file
+    my $output = qx(ls -1 /var/log/maillog* | xargs cat |pflogsumm -d yesterday --detail 0 --no-no-msg-size);
+    return format_as_html("Daily Summary Report", $output);
+}
+
+sub daily_summary_report_today {
+    my $log_file = shift;  # Path to log file
+    my $output = qx(ls -1 /var/log/maillog* | xargs cat |pflogsumm -d today --detail 0 --no-no-msg-size);
+    return format_as_html("Daily Summary Report", $output);
+}
+
+sub top_senders_and_recipients {
+    my $log_file = shift;
+    my $output = qx(pflogsumm --smtpd-stats $log_file);
+    return format_as_html("Top Senders and Recipients", $output);
+}
+
+sub bounce_rate_analysis {
+    my $log_file = shift;
+    my $output = qx(pflogsumm --bounce-detail 10 $log_file);  # Show up to 10 bounce details
+    return format_as_html("Bounce Rate Analysis", $output);
+}
+
+sub spam_and_virus_filter_report {
+    my $log_file = shift;
+    my $output = qx(pflogsumm -u 10 $log_file);  # User report with up to 10 entries
+    return format_as_html("Spam and Virus Filtering Report", $output);
+}
+
+sub delivery_status_report {
+    my $log_file = shift;
+    my $output = qx(pflogsumm --deferral-detail 10 $log_file);  # Show deferral details
+    return format_as_html("Delivery Status Report", $output);
+}
+
+sub geographical_analysis_of_email {
+    my $log_file = shift;
+    # `pflogsumm` doesn't have a specific option for geographic analysis in the help text;
+    # It's assumed this could be replaced with something relevant, like a SMTP detail.
+    my $output = qx(pflogsumm --smtp-detail 10 $log_file);  # Show up to 10 SMTP details
+    return format_as_html("Geographic Analysis of Email", $output);
+}
+
+sub traffic_analysis {
+    my $log_file = shift;
+    my $output = qx(pflogsumm --verbose-msg-detail $log_file);  # Request verbose detail
+    return format_as_html("Traffic Analysis", $output);
+}
+
+sub authentication_analysis {
+    my $log_file = shift;
+    my $output = qx(pflogsumm -u 10 --verbose-msg-detail $log_file);  # User detailed report
+    return format_as_html("Authentication Analysis", $output);
+}
+
+sub user_activity_report {
+    my $log_file = shift;
+    my $output = qx(pflogsumm -u 20 $log_file);  # Show user activity for up to 20 users
+    return format_as_html("User Activity Report", $output);
+}
+
+sub error_reporting {
+    my $log_file = shift;
+    my $output = qx(pflogsumm --problems-first $log_file);  # This will show problems first
+    return format_as_html("Error Reporting", $output);
+}
+
+sub comparison_reports {
+    my ($log_file1, $log_file2) = @_; # Comparing two log files
+    my $output = qx(pflogsumm $log_file1 $log_file2);  # Standard comparison without special flags
+    return format_as_html("Comparison Reports", $output);
+}
+
+sub customized_reports {
+    my $log_file = shift;
+    # Because we don't have a concrete custom flag, we'll consider using -d with specific detail.
+    my $output = qx(pflogsumm --detail 10 $log_file);  # Generally show detailed summary
+    return format_as_html("Customized Reports", $output);
+}
+
+sub format_as_html {
+    my ($title, $content) = @_;
+    return <<HTML;
+<h2>$title</h2>
+<pre>$content</pre>
+HTML
+}
+
+
+### 1. Message Tracking
+#sub trace_message {
+    #my ($log_path, $message_id) = @_;
+    ##my $tracer = Mail::Log::Trace::Postfix->new({log_file => $log_path});
+    ##$tracer->set_message_id($message_id);
+    
+    #my $output = "Message Tracking Report for ID: $message_id\n";
+    ##$output .= "=" x 50 . "\n";
+    ##$output .= sprintf "%-12s: %s\n", 'From', $tracer->get_from_address;
+    ##$output .= sprintf "%-12s: %s\n", 'Status', $tracer->get_final_status;
+    
+    ##$output .= "\nRecipients:\n";
+    ##$output .= join("\n", map { "- $_" } $tracer->get_recipient_addresses);
+    
+    ##$output .= "\n\nTimeline:\n";
+    ##my $timeline = $tracer->get_timestamps;
+    ##while (my ($stage, $time) = each %$timeline) {
+        ##$output .= sprintf "%-10s: %s\n", ucfirst($stage), $time;
+    ##}
+    
+    #return $output || "No records found for message ID: $message_id";
+#}
+
+#### 2. Queue Analysis
+#sub get_queue_stats {
+    #my $spool_dir = '/var/spool/postfix';
+    #my %queues = map { $_ => 0 } qw(active deferred bounce hold corrupt);
+    
+    #foreach my $q (keys %queues) {
+        #opendir(my $dh, "$spool_dir/$q");
+        #$queues{$q} = scalar(grep { -f "$spool_dir/$q/$_" } readdir($dh));
+        #closedir($dh);
+    #}
+    
+    #my $output = "Current Postfix Queue Status\n";
+    #$output .= "=" x 30 . "\n";
+    #$output .= sprintf "%-10s: %3d messages\n", ucfirst($_), $queues{$_} 
+        #for sort keys %queues;
+    #$output .= "\nTotal: " . sum(values %queues) . " messages in queue";
+    
+    #return $output;
+#}
+
+#### 3. Message Statistics
+#sub get_message_stats {
+    #my ($log_path) = @_;
+    #my %stats = (received => 0, rejected => 0, delivered => 0, 
+                #deferred => 0, bounced => 0, held => 0);
+
+    #open(my $fh, '<', $log_path);
+    #while(<$fh>) {
+        #$stats{received}++ if /qmgr.*: [A-Z0-9]+: from=/;
+        #$stats{delivered}++ if /status=sent/;
+        #$stats{rejected}++ if /NOQUEUE: reject/;
+        #$stats{deferred}++ if /status=deferred/;
+        #$stats{bounced}++ if /status=bounced/;
+        #$stats{held}++ if /status=hold/;
+    #}
+    #close($fh);
+    
+    #my $output = "Message Statistics for " . localtime . "\n";
+    #$output .= "=" x 40 . "\n";
+    #$output .= sprintf "%-12s: %6d\n", 'Received', $stats{received};
+    #$output .= sprintf "%-12s: %6d (%.1f%%)\n", 'Delivered', $stats{delivered},
+        #($stats{received} ? ($stats{delivered}/$stats{received}*100) : 0);
+    #$output .= sprintf "%-12s: %6d\n", 'Rejected', $stats{rejected};
+    #$output .= sprintf "%-12s: %6d\n", 'Deferred', $stats{deferred};
+    #$output .= sprintf "%-12s: %6d\n", 'Bounced', $stats{bounced};
+    #$output .= sprintf "%-12s: %6d\n", 'Held', $stats{held};
+    
+    #return $output;
+#}
+
+#### 4. User Activity Audit
+#sub get_user_activity {
+    #my ($log_path, $email) = @_;
+    ##my $tracer = Mail::Log::Trace::Postfix->new({log_file => $log_path});
+    
+    ##my $sent = scalar $tracer->find_messages_by_sender($email);
+    ##my $received = scalar $tracer->find_messages_by_recipient($email);
+    
+    #my $output = "Activity Report for: $email\n";
+    ##$output .= "=" x (length($email) + 18) . "\n";
+    ##$output .= "Messages sent:     $sent\n";
+    ##$output .= "Messages received: $received\n\n";
+    
+    ##$output .= "Last week's activity:\n";
+    ##$output .= join("\n", map { sprintf "- %s: %d messages", $_->[0], $_->[1] }
+        ##$tracer->get_weekly_stats($email));
+    
+    #return $output || "No activity found for $email";
+#}
+
+#### 5. Security Monitoring
+#sub detect_auth_failures {
+    #my ($log_path) = @_;
+    #my %failures;
+    
+    #open(my $fh, '<', $log_path);
+    #while(<$fh>) {
+        #if(/SASL (?:LOGIN|PLAIN) authentication failed.*?\[([0-9.]+)\]/) {
+            #$failures{$1}++;
+        #}
+    #}
+    #close($fh);
+    
+    #return "No authentication failures found" unless keys %failures;
+    
+    #my $output = "Authentication Failure Report\n";
+    #$output .= "=" x 30 . "\n";
+    #$output .= sprintf "%-15s %s\n", 'IP Address', 'Attempts';
+    #$output .= sprintf "%-15s %s\n", '-' x 15, '-' x 7;
+    
+    #foreach my $ip (sort { $failures{$b} <=> $failures{$a} } keys %failures) {
+        #$output .= sprintf "%-15s %5d\n", $ip, $failures{$ip};
+    #}
+    #$output .= "\nTotal failures: " . sum(values %failures);
+    
+    #return $output;
+#}
+
+
+
+
+1;

root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Clamav/clamav_en.lex

@@ -2,7 +2,7 @@
 'clm_LABEL_FILESYSTEM_SCAN_PERIOD' => 'Scan filesystem',
 'clm_DESC_FILESYSTEM_SCAN_PERIOD' => '<h2>General Settings</h2>
 If this option is enabled then the filesystem will be 
-scanned for viruses.A report of any found viruses will be
+scanned for viruses. A report of any found viruses will be
 emailed to the administrator.',
 'clm_LABEL_QUARANTINE' => 'Quarantine infected files',
 'clm_LABEL_CLAM_VERSIONS' => 'ClamAV and db versions',

root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Domains/domains_en.lex

@@ -14,26 +14,26 @@ web site for that domain.',
 i-bay as the content.',
 'dom_DOMAIN_NAME_VALIDATION_ERROR' => 'Error: unexpected or missing characters in domain name
 [_1].The domain name should contain one or more
-letters, numbers, periods and minus signs.Did not create new domain.',
+letters, numbers, periods and minus signs. Did not create new domain.',
 'dom_DOMAIN_DESCRIPTION_VALIDATION_ERROR' => 'Error: unexpected or missing characters in domain description
 [_1]. Did not create new domain.',
-'dom_DOMAIN_IN_USE_ERROR' => 'Error: domain [_1] is already in use.Did not create
+'dom_DOMAIN_IN_USE_ERROR' => 'Error: domain [_1] is already in use. Did not create
 new domain.',
-'dom_SYSTEM_DOMAIN_ERROR' => 'Error: domain [_1] is your system domain name.You
-cannot have a domain with the same name.Did not create new domain.',
+'dom_SYSTEM_DOMAIN_ERROR' => 'Error: domain [_1] is your system domain name. You
+cannot have a domain with the same name. Did not create new domain.',
 'dom_SUCCESSFULLY_CREATED' => 'Successfully created domain [_1].Your web
-server is now being restarted.The links on this page will be
+server is now being restarted. The links on this page will be
 inactive until the web server restart is complete.',
 'dom_MODIFY_TITLE' => 'Modify domain',
 'dom_NONEXISTENT_DOMAIN_ERROR' => 'Error: [_1] is not an existing domain.',
 'dom_SUCCESSFULLY_MODIFIED' => 'Successfully modified domain [_1].Your web
-server is now being restarted.The links on this page will be inactive until the web server restart is complete.',
+server is now being restarted. The links on this page will be inactive until the web server restart is complete.',
 'dom_REMOVE_TITLE' => 'Remove domain',
 'dom_REMOVE_DESCRIPTION' => 'You are about to remove the domain "[_1]" ([_2]).',
 'dom_ABOUT_TO_REMOVE' => 'Are you sure you wish to remove this domain ?',
 'dom_ERROR_WHILE_REMOVING_DOMAIN' => 'Error: internal failure while removing domain [_1].',
 'dom_SUCCESSFULLY_DELETED' => 'Successfully deleted domain [_1]. Your web server
-is now being restarted.The links on this page will be inactive
+is now being restarted. The links on this page will be inactive
 until the web server restart is complete.',
 'dom_DESC_CORPORATE_DNS_CURRENT' => 'Corporate DNS Settings',
 'dom_DOMAINS_PAGE_CORPORATE_DNS' => 'Modify corporate DNS settings',

root/usr/share/smanager/lib/SrvMngr/I18N/Modules/General/general_en.lex

@@ -128,7 +128,7 @@
 'FM_IP_NUMBER3' => '[_1] is more than 255',
 'FM_USERNAME' => 'This field must look like a valid username (3 to 8 letters and numbers)',
 'FM_PASSWORD1' => 'You must provide a password.',
-'FM_PASSWORD2' => 'The password you provided was not a good password.A good password must contain all of the following: upper case letter, lower case letter, number, non-alphanumeric character, be at least 7 characters long.',
+'FM_PASSWORD2' => 'The password you provided was not a good password. A good password must contain all of the following: upper case letter, lower case letter, number, non-alphanumeric character, be at least 7 characters long.',
 'FM_MAC_ADDRESS1' => 'You must provide a MAC address.',
 'FM_MAC_ADDRESS2' => 'The MAC address you provided was not valid.',
 'FM_ERR_UNEXPECTED_DESC' => 'Error: unexpected or missing characters in description',
@@ -151,4 +151,4 @@ SMALL => 'Small',
 MEDIUM => 'Medium',
 LARGE => 'Large',
 FIELD_INVALID_CHARS => 'A field you entered contains invalid characters.',
-
+'REPORT_GENERATED' => "Report generated",

root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Groups/groups_en.lex

@@ -4,7 +4,7 @@
 'grp_ACCOUNT_CONFLICT' => 'Error: the group "[_1]" can\'t be created because there is
 already a [_2] account of that name.',
 'grp_INVALID_GROUP_DESCRIPTION' => 'Error: unexpected or missing characters in group description',
-'grp_NO_MEMBERS' => 'Error: no members in group.Did not create new group.',
+'grp_NO_MEMBERS' => 'Error: no members in group. Did not create new group.',
 'grp_CREATED_GROUP' => 'Successfully created user group',
 'grp_DELETED_GROUP' => 'Successfully removed user group',
 'grp_MODIFIED_GROUP' => 'Successfully modifed user group',

root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Hostentries/hostentries_en.lex

@@ -34,17 +34,17 @@ the local network. Please enter a valid IP address in the
 format "aaa.bbb.ccc.ddd".',
 'hos_ETHERNET_ADDRESS_DESCRIPTION' => 'The ethernet address is optional and causes the DHCP server to
 statically bind the local IP address to the computer with this
-ethernet address.If specified, it must be of the form
+ethernet address. If specified, it must be of the form
 "AA:BB:CC:DD:EE:FF" and must contain only the numbers 0-9 and
 the letters A-F.',
 'hos_CREATE_LOCAL_HOST_TITLE' => 'Create a new hostname referring to a local host.',
-'hos_DIDNT_ENTER_LOCAL_IP' => 'Error: You did not specify a Local IP address.IP
+'hos_DIDNT_ENTER_LOCAL_IP' => 'Error: You did not specify a Local IP address. IP
 addresses must contain only numbers and periods and
 be in the form "aaa.bbb.ccc.ddd".Did not create hostname.',
 'hos_IP_VALIDATION_ERROR' => 'Error: IP Address [_1] is
 invalid. IP Addresses must contain only numbers and periodsand be in the form "aaa.bbb.ccc.ddd". Did not create hostname.',
 'hos_MAC_ADDRESS_VALIDATION_ERROR' => 'Error: Ethernet address [_1]
-is invalid.Ethernet addresses must be in the
+is invalid. Ethernet addresses must be in the
 form "AA:BB:CC:DD:EE:FF" and only contain the
 numbers 0-9 and the letters A-F. Did not create
 hostname.',

root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Pseudonyms/pseudonyms_en.lex

@@ -14,7 +14,7 @@ For example, you may wish to create a pseudonym
 "webmaster" for your "webdevelopers" group or a
 pseudonym "joe" for the user "joseph".</p>
 <p>The server automatically creates pseudonyms of the form
-firstname.lastname and firstname_lastname for every user
+firstname. lastname and firstname_lastname for every user
 on the system and a pseudonym "everyone" which contains
 all users on the system.</p>
 <p>Pseudonyms also allow you to create e-mail aliases for valid

root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Qmailanalog/qmailanalog_en.lex

@@ -8,6 +8,14 @@ reports are available.</P>
 these reports</P>',
 'qma_REPORT_TYPE' => 'Choose a report type',
 'qma_GENERATE_REPORT' => 'Generate report',
+'qma_INVALID_REPORT_TYPE' => 'Invalid report type: ',
+'qma_REPORT_GENERATED' => 'Report generated: ',
+'qma_END_OF_REPORT' => 'End of Report',
+'Mail log file analysis' => 'Mail log file analysis',
+
+'qma_Daily_Summary_Report_yesterday' => 'Summary report for yesterday',
+'qma_Daily_Summary_Report_today' => 'Summary report for today up to now',
+
 'qma_LIST_OUTGOING' => 'List outgoing messages and recipients',
 'qma_SUMMARIZE_QUEUE' => 'Summarize status of mail queue',
 'qma_SUCCESSFUL_DELIVERY_DELAY' => 'Successful delivery delay distribution',
@@ -20,9 +28,4 @@ these reports</P>',
 'qma_SENDER_STATS' => 'Sender statistics',
 'qma_SENDMAIL_STYLE' => 'Sendmail style log',
 'qma_REASONS_SUCCESS' => 'Reasons for success',
-'qma_SENDER_UIDS' => 'Sender uids',
-'qma_INVALID_REPORT_TYPE' => 'Invalid report type: ',
-'qma_REPORT_GENERATED' => 'Report generated: ',
-'qma_END_OF_REPORT' => 'End of Report',
-'Mail log file analysis' => 'Mail log file analysis',
-
+'qma_SENDER_UIDS' => 'Sender uids',

root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Remoteaccess/remoteaccess_en.lex

@@ -26,7 +26,9 @@ experienced administrators
 for remote problem diagnosis and resolution. 
 We recommend leaving this
 parameter set to "No Access"
-unless you have a specific reason to do otherwise.',
+unless you have a specific reason to do otherwise.
+Note that an "Autoblock" feature is enabled by default when public access is enabled; to disable or tune this feature, refer to the manual at https://wiki.koozali.org/AutoBlock
+',
 'rma_TITLE_FTP_ACCESS' => 'FTP Settings',
 'rma_DESC_FTP_ACCESS' => 'You can also control <b>FTP</b> access to your server. We
 recommend leaving this parameter set to \'no access\' unless you
@@ -75,11 +77,11 @@ connected to a server serial port.',
 'rma_LABEL_PPTP_ACCESS' => 'PPTP default user access',
 'rma_TITLE_TELNET_ACCESS' => 'Telnet Settings',
 'rma_DESC_TELNET_ACCESS' => 'WARNING:Telnet is currently enabled, but this feature is
-no longer supported.Telnet is inherently insecure and should only
+no longer supported. Telnet is inherently insecure and should only
 be used in circumstances where no practical alternative exists. You
 should change option to [_1] and use
 secure shell if remote access is
-required.Once disabled, telnet will no longer appear on this 
+required. Once disabled, telnet will no longer appear on this 
 screen. ',
 'rma_TITLE_IPSECRW' => 'IPSEC Client (Roadwarrior) Settings',
 'rma_DESC_IPSECRW' => 'You can allow IPSEC client access to your server, authenticated by
@@ -90,4 +92,4 @@ to the number 0 unless you require IPSEC client access.',
 can do so here.<br>Any old certificates will no longer
 authenticate against the server, so <b><i>all IPSEC clients will
 need to import a new certificate!</i></b>.',
-'rma_LABEL_IPSECRW_RESET' => 'Reset digital certificates',
+'rma_LABEL_IPSECRW_RESET' => 'Reset digital certificates',

root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Review/review_en.lex

@@ -2,7 +2,7 @@
 'rvw_FORM_TITLE' => 'Review configuration',
 'rvw_DESCRIPTION' => 'This report summarizes the networking, server, and domain
 parameters on this server relevant to configuring
-the client computers on your network.You may wish to print this
+the client computers on your network. You may wish to print this
 page and use it as a reference.',
 'rvw_NETWORKING_PARAMS' => 'Networking Parameters',
 'rvw_SERVER_MODE' => 'Server Mode',

root/usr/share/smanager/lib/SrvMngr/I18N/Modules/Viewlogfiles/viewlogfiles_en.lex

@@ -4,7 +4,7 @@
 by the services running on your server.',
 'log_LOG_FILE_SELECT_DESC' => 'Choose a log file to view',
 'log_FILTER_PATTERN_DESC' => 'You may optionally specify a filter pattern to display only the
-lines from the log file which match this pattern.If you leave
+lines from the log file which match this pattern. If you leave
 this field blank, all available lines of the log file will be
 displayed. Note that this option is not used if you download the
 logfile.',

root/usr/share/smanager/themes/default/public/configuration_report.tmpl

@@ -0,0 +1,38 @@
+Configuration report created {$report_creation_time}
+
+==================
+Base configuration
+==================
+SME server version: 	  {$releaseversion}
+SME server mode:    	  {$systemmode}
+SME server previous mode: {$previoussystemmode }
+Running Kernel:     	  {$curkernel}
+===========================
+New RPMs not in base system
+===========================     
+{ foreach $i (@newrpms) {
+            $OUT .= "$i";
+          }    
+} 
+===========================
+Custom and modified templates
+===========================
+{ foreach $i (@templates) {
+            $OUT .= "$i";
+          }
+}
+===========================
+Modified events
+===========================
+{ foreach $i (@events) {
+            $OUT .= "$i";
+          }
+}
+=======================
+Additional repositories
+=======================
+{ foreach $r (@repositories) {
+            $OUT .= "$r";
+          }
+}   		
+DONE!

root/usr/share/smanager/themes/default/public/css/module.css

@@ -0,0 +1,43 @@
+/* General styles for the module panel */
+#module {
+    padding: 20px;
+    border: 1px solid #ccc;
+    border-radius: 10px;
+    background-color: #f9f9f9;
+    box-shadow: 0 4px 8px rgba(0, 0, 0, 0.1);
+}
+
+/* Debug information styling */
+#module p {
+    font-family: monospace;
+    color: #555;
+}
+
+#module pre {
+    background-color: #eee;
+    padding: 10px;
+    border-radius: 5px;
+}
+
+/* Error message styling */
+.sme-error {
+    color: #d9534f;
+    font-weight: bold;
+    margin-bottom: 15px;
+}
+
+/* Title styling */
+#module h1 {
+    font-family: Arial, sans-serif;
+    color: #333;
+    text-align: center;
+    margin-bottom: 20px;
+}
+
+/* Content styling */
+.module-content {
+    font-family: Georgia, serif;
+    font-size: 13px;
+    line-height: 1.2;
+    color: #555;
+}

root/usr/share/smanager/themes/default/public/js/qmailanalog.js

@@ -0,0 +1,25 @@
+document.addEventListener('DOMContentLoaded', function() {
+    const analysisType = document.getElementById('analysis_type');
+    const messageIdGroup = document.getElementById('message_id_group');
+    const emailAddressGroup = document.getElementById('email_address_group');
+
+    // Initially hide both controls
+    messageIdGroup.style.display = 'none';
+    emailAddressGroup.style.display = 'none';
+
+    analysisType.addEventListener('change', function() {
+        // Hide both controls first
+        messageIdGroup.style.display = 'none';
+        emailAddressGroup.style.display = 'none';
+
+        // Show the relevant control based on the selected option
+        switch(this.value) {
+            case 'trace_message':
+                messageIdGroup.style.display = 'block';
+                break;
+            case 'user_activity':
+                emailAddressGroup.style.display = 'block';
+                break;
+        }
+    });
+});

root/usr/share/smanager/themes/default/templates/back_tape_configure.html.ep

@@ -74,10 +74,8 @@
 	</p><br>
 
 	%= hidden_field 'Function' => $bac_datas->{'function'}
-    <div class='center'>
 	%= submit_button $c->l('bac_UPDATE_CONF'), class => 'action'
-    </div>
 
     % end
 </div>
-% end
+% end

root/usr/share/smanager/themes/default/templates/back_tape_restore.html.ep

@@ -30,10 +30,8 @@
 
 	%= hidden_field 'Function' => $bac_datas->{'function'}
 
-    <div class='center'>
 	%= submit_button $c->l('bac_RESTORE_FROM_TAPE'), class => 'action'
-    </div>
 
     % end
 </div>
-% end
+% end

root/usr/share/smanager/themes/default/templates/back_workstn_configure.html.ep

@@ -44,12 +44,10 @@
 	</span></p>
 
 	%= hidden_field 'Function' => $bac_datas->{'function'} . '1'
-    <div class='center'>
 	%= submit_button $c->l('NEXT'), class => 'action'
-    </div>
 
     % end
 
 </div>
 
-% end
+% end

root/usr/share/smanager/themes/default/templates/back_workstn_configure1.html.ep

@@ -148,9 +148,7 @@
 
 	%= hidden_field 'Function' => $bac_datas->{function}
 	%= hidden_field 'VFSType' => $bac_datas->{vfstype}
-    <div class='center'>
 	%= submit_button $c->l('bac_UPDATE_CONF'), class => 'action'
-    </div>
     % end
 </div>
-% end
+% end

root/usr/share/smanager/themes/default/templates/back_workstn_restore.html.ep

@@ -38,9 +38,7 @@
 	</span><br><br>
 
 	%= hidden_field 'Function' => $bac_datas->{'function'}
-    <div class='center'>
 	%= submit_button $c->l('bac_RESTORE_FROM_WORKSTN'), class => 'action'
-    </div>
     % end
 </div>
-% end
+% end

root/usr/share/smanager/themes/default/templates/back_workstn_restore1.html.ep

@@ -29,9 +29,7 @@
 	%=l 'bac_YOU_MUST_REBOOT'
 	</p>
 	%= hidden_field 'Function' => $bac_datas->{'function'}
-    <div class='center'>
 	%= submit_button $c->l('bac_REBOOT'), class => 'action'
-    </div>
     % end
 </div>
 

root/usr/share/smanager/themes/default/templates/back_workstn_sel_restore.html.ep

@@ -39,12 +39,10 @@
 	</span><br>
 	<br>
 	%= hidden_field 'Function' => $bac_datas->{'function'}
-    <div class='center'>
 	%= submit_button $c->l('PERFORM'), class => 'action'
-    </div>
 
     % end
 
 </div>
 
-% end
+% end

root/usr/share/smanager/themes/default/templates/back_workstn_sel_restore1.html.ep

@@ -41,9 +41,7 @@
 	%= hidden_field 'Backupset' => $bac_datas->{'backupset'}
 	%= hidden_field 'Filterexp' => $bac_datas->{'filterexp'}
 
-    <div class='center'>
 	%= submit_button $c->l('PERFORM'), class => 'action'
-    </div>
 
     % end
 

root/usr/share/smanager/themes/default/templates/back_workstn_sel_restore2.html.ep

@@ -24,9 +24,7 @@
 
     %= form_for '/backupd' => (method => 'POST') => begin
 	%= hidden_field 'Function' => $bac_datas->{'function'}
-    <div class='center'>
 	%= submit_button $c->l('NEXT'), class => 'action'
-    </div>
 
     % end
 

root/usr/share/smanager/themes/default/templates/back_workstn_verify.html.ep

@@ -44,10 +44,8 @@
 
 	<br><br>
 	%= hidden_field 'Function' => $bac_datas->{'function'} . '1'
-    <div class='center'>
 	%= submit_button $c->l('bac_VERIFY'), class => 'action'
-    </div>
 
     % end
 </div>
-% end
+% end

root/usr/share/smanager/themes/default/templates/back_workstn_verify1.html.ep

@@ -28,10 +28,8 @@
 
     %= hidden_field 'Function' => $bac_datas->{'function'}
 
-    <div class='center'>
     %= submit_button $c->l('NEXT'), class => 'action'
-    </div>
 
     % end
 </div>
-% end
+% end

root/usr/share/smanager/themes/default/templates/backup.html.ep

@@ -70,12 +70,10 @@
 	</span></p>
 
 	<br>
-    <div class='center'>
-	%= submit_button $c->l('PERFORM'), class => 'action'
-    </div>
-
+ 	%= submit_button $c->l('PERFORM'), class => 'action'
+ 
     % end
 
 </div>
 
-% end
+% end

root/usr/share/smanager/themes/default/templates/bugreport2.html.ep

@@ -18,9 +18,16 @@
     <% my $btn = l('bugr_Download this report'); %>
 
     %= form_for 'bugreportD' => (method => 'POST') => begin
-	%= submit_button "$btn", class => 'action'
-	%= hidden_field 'trt' => $bugr_datas->{trt}
-    % end    
+		%= submit_button "$btn", class => 'action'
+		%= hidden_field 'trt' => $bugr_datas->{trt}
+    % end   
+    
+    % my $out = "================== <br />";
+    % $out .= "Boot anaysis image (right click and save image to download)<br />";
+    % $out .= "================== <br />";
+    % $out .= "<img src='images/boot.svg' alt='boot timing image' width=95% >";
+    
+   <br><%= $c->render_to_string(inline=>$out) %><br>
 
 </div>
 

root/usr/share/smanager/themes/default/templates/module.html.ep

@@ -1,20 +1,27 @@
 % layout 'default', title => "Sme server 2 - module";
 
 % content_for 'module' => begin
-
+%= stylesheet '/css/module.css'
 <div id='module' class='module module-panel'>
     % if (config->{debug} == 1) {
-	<p>
-	%= dumper $c->current_route
-	</p>
+        <p>
+            <strong>Debug Info:</strong>
+            <pre><%= dumper $c->current_route %></pre>
+        </p>
     % }
-    % if ( stash 'error' ) {
-    	<br><div class=sme-error>
-    	%= $c->render_to_string(inline => stash 'error') 
-	</div>
-    %}
-    <h1> <%=$title %></h1><br>
-    %= $c->render_to_string( inline => stash 'modul' )
+    
+    % if (stash 'error') {
+        <div class="sme-error">
+            <strong>Error:</strong><br>
+            <%= $c->render_to_string(inline => stash 'error') %>
+        </div>
+    % }
+    
+    <h1><%= $title %></h1>
+    
+    <div class="module-content">
+        <%= $c->render_to_string(inline => stash 'modul') %>
+    </div>
 </div>
 
-%end
+% end

root/usr/share/smanager/themes/default/templates/partials/_footer.html.ep

@@ -2,7 +2,7 @@
 <HR class="sme-copyrightbar">
 <a href="https://mojolicious.org" target="_blank"><img src="images/sme-mojo-logo-white.png" style="position:relative;"></a>
 <font class="sme-copyright">
-%	if ( $c->is_logged_in ) {
+%	if ( $c->is_logged_in && $c->is_admin) {
 	SME Server <%= session 'releaseVersion' %>-<%= $c->app->VERSION %> Manager II
 	% my $mode;
 	% if (config->{mode} eq 'development'){ $mode = '-dev';} else { $mode = '';}

root/usr/share/smanager/themes/default/templates/partials/_info.html.ep

@@ -1,3 +1,4 @@
+<%     use POSIX qw(strftime); %>
 <div id="info">
     <% if (! $c->session->{PwdSet} ) { %>
 	<div class="sme-error"><h5>
@@ -13,4 +14,12 @@
         Warning: Development or debug mode enabled AND public access is offered !
         </h5></div>
     <% } %>
+    <% my $curdate = strftime '%Y%m%d', localtime; %>
+    <% if ( "$curdate"  >= "20290531" ) { %>
+	<div class="sme-error"><h5>
+      URGENT NOTICE: As per May 31st 2029, SME Server 11 is obsolete, and potentially INSECURE. NO support will be offered for any issue found with this installed version.
+      Please migrate IMMEDIATELY to Koozali SME Server 12 or higher version. Failure to upgrade may lead to the compromise of this server.
+      </br>Please, consult <a href="https://wiki.koozali.org/SME_Server:Download" target="_blank">https://wiki.koozali.org/SME_Server:Download</a> to get the latest version
+     </h5></div>
+    <% } %>
 </div>

root/usr/share/smanager/themes/default/templates/qmailanalog.html.ep

@@ -1,6 +1,6 @@
 % layout 'default', title => "Sme server 2 - qmailanalog";
-
 % content_for 'module' => begin
+%= javascript '/js/qmailanalog.js'
 <div id='module' class='module qmailanalog-panel'>
     %if (config->{debug} == 1) {
 	<p>
@@ -11,17 +11,34 @@
     <br>
     <%= $modul %>
     <% 	my $btn = l('qma_GENERATE_REPORT'); %>
-
     %= form_for 'qmailanalog' => (method => 'POST') => begin
-	<p>
-	<span class=label>
-	%=l 'qma_REPORT_TYPE'
-	</span><span class=data>
-	<!-- (to be sorted) -->
-	%= select_field 'report_type' => $c->reportType_list()
-	</span>
-	</p>
-	%= submit_button "$btn", class => 'action'
+		<p>
+		<span class=label>
+		%=l 'qma_REPORT_TYPE'
+		</span><span class=data>
+		<!-- (to be sorted) -->
+		%= select_field 'report_type' => $c->reportType_list(), id => 'analysis_type'
+		</span>
+		</p>
+
+		<!--And optional parameters, depending on the choice.-->
+		<div id="message_id_group">
+			<span class=label>
+			%= label_for message_id => 'Message ID:'
+			</span><span class=data>
+			%= text_field 'message_id', placeholder => 'Enter Postfix Message ID', id => 'message_id_group'
+			</span>
+		</div>
+
+		<div id="email_address_group">
+			<span class=label>
+			%= label_for email_address => 'Email Address:'
+			</span><span class=data>
+			%= email_field 'email_address', placeholder => 'Enter email address', id => 'email_address_group'
+			</span>
+		</div>
+
+		%= submit_button "$btn", class => 'action'
     % end
 </div>
 %end

smeserver-manager.spec

@@ -2,7 +2,7 @@ Summary: Sme server  navigation module : manager 2
 %define name smeserver-manager
 Name: %{name}
 %define version 11.0.0
-%define release 58
+%define release 66
 Version: %{version}
 Release: %{release}%{?dist}
 License: GPL
@@ -143,6 +143,32 @@ true
 %defattr(-,root,root)
 
 %changelog
+* Tue Mar 11 2025 Brian Read <brianr@koozali.org> 11.0.0-66.sme
+- Move the button for each backup panel to the left to conform to all the other panels.
+
+* Sun Mar 09 2025 Brian Read <brianr@koozali.org> 11.0.0-65.sme
+- Sort out missing hostname on nfs and cifs workstation backup on error [SME: 12948]
+
+* Sat Mar 08 2025 Brian Read <brianr@koozali.org> 11.0.0-64.sme
+- Add code to check for boot phase completion [SME: 12953]
+
+* Thu Mar 06 2025 Brian Read <brianr@koozali.org> 11.0.0-63.sme
+- Add boot.svg image to Bug Report panel [SME: 12953]
+- Move report template to inside smanager tree
+- Add one-off systemd task to create boot.svg run from panel
+
+* Tue Mar 04 2025 Brian Read <brianr@koozali.org> 11.0.0-62.sme
+- Update *_en.lex files to conform to standard english punctuation  [SME: 11809]
+
+* Tue Mar 04 2025 Brian Read <brianr@koozali.org> 11.0.0-61.sme
+- Arrange for the version in the footer to be suppressed if non admin login  [SME: 12887]
+
+* Thu Feb 27 2025 Brian Read <brianr@koozali.org> 11.0.0-60.sme
+- Enhance ssh security wording to mention autoblock in remoteaccess panel  [SME: 8309]
+
+* Thu Feb 27 2025 Brian Read <brianr@koozali.org> 11.0.0-59.sme
+- Arrange for Urgent notice to be displayed if date is past Rocky 8 EOL [SME: 12918]
+
 * Tue Feb 25 2025 Brian Read <brianr@koozali.org> 11.0.0-58.sme
 - re-organise open db placement [SME: 12695]
 - Re-arrange parameters to tar to avoid warning message in logs [SME: 12943]