initial commit of file from CVS for e-smith-nutUPS on Wed 12 Jul 09:01:20 BST 2023

.gitignore

@@ -0,0 +1,4 @@
+*.rpm
+*.log
+*spec-20*
+*.tar.xz

Makefile

@@ -0,0 +1,21 @@
+# Makefile for source rpm: e-smith-nutUPS
+# $Id: Makefile,v 1.1 2016/02/05 22:19:01 stephdl Exp $
+NAME := e-smith-nutUPS
+SPECFILE = $(firstword $(wildcard *.spec))
+
+define find-makefile-common
+for d in common ../common ../../common ; do if [ -f $$d/Makefile.common ] ; then if [ -f $$d/CVS/Root -a -w $$/Makefile.common ] ; then cd $$d ; cvs -Q update ; fi ; echo "$$d/Makefile.common" ; break ; fi ; done
+endef
+
+MAKEFILE_COMMON := $(shell $(find-makefile-common))
+
+ifeq ($(MAKEFILE_COMMON),)
+# attept a checkout
+define checkout-makefile-common
+test -f CVS/Root && { cvs -Q -d $$(cat CVS/Root) checkout common && echo "common/Makefile.common" ; } || { echo "ERROR: I can't figure out how to checkout the 'common' module." ; exit -1 ; } >&2
+endef
+
+MAKEFILE_COMMON := $(shell $(checkout-makefile-common))
+endif
+
+include $(MAKEFILE_COMMON)

README.md

@@ -1,3 +1,17 @@
-# e-smith-nutUPS
+# <img src="https://www.koozali.org/images/koozali/Logo/Png/Koozali_logo_2016.png" width="25%" vertical="auto" style="vertical-align:bottom"> e-smith-nutUPS
 
-SMEServer Koozali developed git repo for e-smith-nutUPS smeserver
+SMEServer Koozali developed git repo for e-smith-nutUPS smeserver
+
+## Wiki
+<br />https://wiki.koozali.org/
+
+## Bugzilla
+Show list of outstanding bugs: [here](https://bugs.koozali.org/buglist.cgi?component=e-smith-nutUPS&product=SME%20Server%2010.X&query_format=advanced&limit=0&bug_status=UNCONFIRMED&bug_status=NEW&bug_status=ASSIGNED&bug_status=REOPENED&bug_status=CONFIRMED)
+
+## Description
+
+<br />*This description has been generated by an LLM AI system and cannot be relied on to be fully correct.*
+*Once it has been checked, then this comment will be deleted*
+<br />
+
+e-smith-nutUPS is an open-source software designed to monitor and control an Uninterruptible Power Supply (UPS) device connected to a computer. It offers features such as automatic shutdown of the computer when the UPS battery reaches a critical low-power level, and the capability to remotely monitor and control the UPS from a web browser or from a command line interface. It supports a wide range of UPS devices, and is compatible with most operating systems. With e-smith-nutUPS, users can be assured of reliable and consistent power protection even during power outages.

additional/config/hosts.conf

@@ -0,0 +1,29 @@
+# Network UPS Tools: example hosts.conf
+#
+# This file is used to control the CGI programs.  If you have not
+# installed them, you may safely ignore or delete this file.
+#
+# -----------------------------------------------------------------------
+#
+# upsstats will use the list of MONITOR entries when displaying the
+# default template (upsstats.html).  The "FOREACHUPS" directive in the
+# template will use this file to find systems running upsd.
+#
+# upsstats and upsimage also use this file to determine if a host may be
+# monitored.  This keeps evil people from using your system to annoy
+# others with unintended queries.
+#
+# upsset presents a list of systems that may be viewed and controlled
+# using this file.
+#
+# -----------------------------------------------------------------------
+#
+# Usage: list systems running upsd that you want to monitor
+#
+# MONITOR <system> "<host description>"
+#
+# Examples: 
+#
+# MONITOR myups@localhost "Local UPS"
+# MONITOR su2200@10.64.1.1 "Finance department"
+# MONITOR matrix@shs-server.example.edu "Sierra High School data room #1"

additional/config/ups.conf

@@ -0,0 +1,93 @@
+# Network UPS Tools: example ups.conf
+#
+# This is where you configure all the UPSes that this system will be
+# monitoring directly.  These are usually attached to serial ports, but
+# USB devices and SNMP devices are also supported.
+#
+# This file is used by upsdrvctl to start and stop your driver(s), and
+# is also used by upsd to determine which drivers to monitor.  The 
+# drivers themselves also read this file for configuration directives.
+#
+# The general form is:
+# 
+# [upsname]
+#       driver = <drivername>
+#         port = <portname>
+#	< any other directives here >
+#
+# The section header ([upsname]) can be just about anything as long as
+# it is a single word inside brackets.  upsd uses this to uniquely 
+# identify a UPS on this system.
+#
+# If you have a UPS called snoopy, your section header would be "[snoopy]".
+# On a system called "doghouse", the line in your upsmon.conf to monitor
+# it would look something like this:
+#
+# 	MONITOR snoopy@doghouse 1 upsmonuser mypassword master
+#
+# It might look like this if monitoring in slave mode:
+#
+# 	MONITOR snoopy@doghouse 1 upsmonuser mypassword slave
+#
+# Configuration directives
+# ------------------------
+# 
+# These directives are common to all drivers that support ups.conf:
+#
+#  driver: REQUIRED.  Specify the program to run to talk to this UPS.  
+#          apcsmart, fentonups, bestups, and sec are some examples.
+#
+#    port: REQUIRED.  The serial port where your UPS is connected.  
+#          /dev/ttyS0 is usually the first port on Linux boxes, for example.
+#
+# sdorder: optional.  When you have multiple UPSes on your system, you
+#          usually need to turn them off in a certain order.  upsdrvctl
+#          shuts down all the 0s, then the 1s, 2s, and so on.  To exclude
+#          a UPS from the shutdown sequence, set this to -1.
+#
+#          The default value for this parameter is 0.
+#
+#  nolock: optional, and not recommended for use in this file.
+#
+#          If you put nolock in here, the driver will not lock the
+#          serial port every time it starts.  This may allow other 
+#          processes to seize the port if you start more than one by 
+#          mistake.
+#
+#          This is only intended to be used on systems where locking
+#          absolutely must be disabled for the software to work.
+#
+# maxstartdelay: optional.  This can be set as a global variable
+#                above your first UPS definition and it can also be
+#                set in a UPS section.  This value controls how long
+#                upsdrvctl will wait for the driver to finish starting.
+#                This keeps your system from getting stuck due to a
+#                broken driver or UPS.
+#
+#                The default is 45 seconds.
+#
+#
+# Anything else is passed through to the hardware-specific part of
+# the driver.
+# 
+# Examples
+# --------
+#
+# A simple example for a UPS called "powerpal" that uses the fentonups
+# driver on /dev/ttyS0 is:
+#
+# [powerpal]
+#	driver = fentonups
+#	port = /dev/ttyS0
+#
+# If your UPS driver requires additional settings, you can specify them
+# here.  For example, if it supports a setting of "1234" for the
+# variable "cable", it would look like this:
+# 
+# [myups]
+# 	driver = mydriver
+#	port = /dev/ttyS1
+#	cable = 1234
+#
+# To find out if your driver supports any extra settings, start it with
+# with the -h option and/or read the driver's documentation.

additional/config/upsd.conf

@@ -0,0 +1,43 @@
+# Network UPS Tools: example upsd configuration file
+#
+# This file contains passwords, so you should keep it secure.
+# 
+# At the very least it should be owned by root, with mode 0600.
+#
+# If you want upsd to be able to reload the configuration files, this
+# file must be readable by whatever user upsd becomes.  See the FAQ.
+
+# =======================================================================
+# Access Control Lists (ACLs)
+#
+# ACL <name> <ipblock>
+# ACL myhost 10.0.0.1/32
+#
+# ACCESS <action> <level> <aclname> [<password>]
+# ACCESS grant login myhost mypass
+# 
+# Use these to define blocks of addresses.  See the upsd.conf(5) man page
+# for more information.
+#
+# This default configuration allows localhost to monitor things and denies
+# access to the rest of the world.  To allow more, see the docs and 
+# change these lines.
+
+ACL all 0.0.0.0/0
+ACL localhost 127.0.0.1/32
+
+ACCESS grant monitor localhost
+ACCESS deny all all
+
+# =======================================================================
+# MAXAGE <seconds>
+# MAXAGE 15
+#
+# This defaults to 15 seconds.  After a UPS driver has stopped updating
+# the data for this many seconds, upsd marks it stale and stops making
+# that information available to clients.  After all, the only thing worse
+# than no data is bad data.
+#
+# You should only use this if your driver has difficulties keeping
+# the data fresh within the normal 15 second interval.  Watch the syslog
+# for notifications from upsd about staleness.

additional/config/upsd.users

@@ -0,0 +1,74 @@
+# Network UPS Tools: Example upsd.users
+#
+# This file sets the permissions for upsd - the UPS network daemon.
+# Users are defined here, are given passwords, and their privileges are
+# controlled here too.  Since this file will contain passwords, keep it
+# secure, with only enough permissions for upsd to read it.
+#
+# At the very least it should be owned by root, with mode 0600.
+#
+# If you want upsd to be able to reload the configuration files, this
+# file must be readable by whatever user upsd becomes.  See the FAQ.
+
+# --------------------------------------------------------------------------
+
+# Each user gets a section.  To start a section, put the username in
+# brackets on a line by itself.  To set something for that user, specify
+# it under that section heading.  The username is case-sensitive, so
+# admin and AdMiN are two different users.
+#
+# Possible settings:
+#
+# password: The user's password.  This is case-sensitive.
+#
+# --------------------------------------------------------------------------
+#
+# allowfrom: ACL names that this user may connect from.  ACLs are
+#            defined in upsd.conf.
+#
+# --------------------------------------------------------------------------
+#
+# actions: Let the user do certain things with upsd.  
+# 
+# Valid actions are:
+#
+# SET	- change the value of certain variables in the UPS
+# FSD   - set the "forced shutdown" flag in the UPS
+# 
+# --------------------------------------------------------------------------
+#
+# instcmds: Let the user initiate specific instant commands.  Use "ALL"
+# to grant all commands automatically.  Here are a few instant
+# commands.  For the full list, see include/shared-tables.h.  
+#
+# FPTEST	- Front panel test
+# BTEST0	- Stop battery test
+# BTEST1	- Start battery test
+# CAL0		- Stop calibration
+# CAL1		- Start calibration
+#
+# --------------------------------------------------------------------------
+#
+# Example:
+#
+#	[admin]
+#		password = mypass
+#		allowfrom = admworkstation admhome
+#		actions = SET
+#		instcmds = ALL
+#
+
+#
+# --- Configuring for upsmon
+#
+# To add a user for your upsmon, use this example:
+#
+#	[monuser]
+#		password  = pass
+#		allowfrom = bigserver
+#
+#		upsmon master			(or upsmon slave)
+#
+# The matching MONITOR line in your upsmon.conf would look like this:
+#
+# MONITOR myups@myhost 1 monuser pass slave

additional/config/upsmon.conf

@@ -0,0 +1,287 @@
+# Network UPS Tools: example upsmon configuration
+#
+# This file contains passwords, so keep it secure.
+
+# --------------------------------------------------------------------------
+# RUN_AS_USER <userid>
+#
+# By default, upsmon splits into two processes.  One stays as root and
+# waits to run the SHUTDOWNCMD.  The other one switches to another userid
+# and does everything else.
+#
+# The default nonprivileged user is set at compile-time with
+# 	'configure --with-user=...'.  
+# 
+# You can override it with '-u <user>' when starting upsmon, or just
+# define it here for convenience.
+#
+# Note: if you plan to use the reload feature, this file (upsmon.conf)
+# must be readable by this user!  Since it contains passwords, DO NOT
+# make it world-readable.  Also, do not make it writable by the upsmon
+# user, since it creates an opportunity for an attack by changing the
+# SHUTDOWNCMD to something malicious.
+#
+# For best results, you should create a new normal user like "nutmon", 
+# then specify it here and make it the owner of your upsmon.conf, then
+# set the mode on upsmon.conf to 0400.
+#
+# RUN_AS_USER nutmon
+
+# --------------------------------------------------------------------------
+# MONITOR <system> <powervalue> <username> <password> ("master"|"slave")
+#
+# List systems you want to monitor.  Not all of these may supply power
+# to the system running upsmon, but if you want to watch it, it has to
+# be in this section.
+# 
+# You must have at least one of these declared.
+#
+# <system> is a UPS identifier in the form [<upsname>@]<hostname>[:<port>]
+# like localhost, su700@mybox, etc.
+# 
+#  Simple entry:
+#
+#  - "localhost" refers to the first UPS on the local system.
+#
+#  Other possibilities:
+# 
+#  - "su700@mybox" means a UPS called "su700" on a system called "mybox"
+#
+#  - "elvis:1234" means the first UPS on a system called "elvis", port 1234.
+#
+#  Finally, to use all of these options:
+#
+#  - "fenton@bigbox:5678" is a UPS called "fenton" on a system called
+#    "bigbox" which runs upsd on port "5678".  Phew!
+#
+# The UPS names like "su700" and "fenton" are set in your ups.conf
+# in [brackets] which identify a section for a particular driver.
+#
+# If the ups.conf on host "doghouse" has a section called "snoopy", the
+# identifier for it would be "snoopy@doghouse".
+#
+# <powervalue> is an integer - the number of power supplies that this UPS 
+# feeds on this system.  Most computers only have one power supply, so this 
+# is normally set to 1.  You need a pretty big or special box to have any 
+# other value here.
+#
+# You can also set this to 0 for a system that doesn't supply any power,
+# but you still want to monitor.  Use this when you want to hear about
+# changes for a given UPS without shutting down when it goes critical.
+#
+# <username> and <password> must match an entry in that system's
+# upsd.users.  If your username is "monmaster" and your password is 
+# "blah", the upsd.users would look like this:
+#
+#	[monmaster]
+#		password  = blah
+#		allowfrom = 	(whatever applies to this host)
+#		upsmon master 	(or slave)
+# 
+# "master" means this system will shutdown last, allowing the slaves
+# time to shutdown first.
+#
+# "slave" means this system shuts down immediately when power goes critical.
+#
+# Examples: 
+#
+# MONITOR myups@bigserver 1 monmaster blah master
+# MONITOR su700@server.example.com 1 upsmon secretpass slave
+
+# --------------------------------------------------------------------------
+# MINSUPPLIES <num>
+#
+# Give the number of power supplies that must be receiving power to keep
+# this system running.  Most systems have one power supply, so you would
+# put "1" in this field.
+#
+# Large/expensive server type systems usually have more, and can run with
+# a few missing.  The HP NetServer LH4 can run with 2 out of 4, for example,
+# so you'd set that to 2.  The idea is to keep the box running as long
+# as possible, right?
+#
+# Obviously you have to put the redundant supplies on different UPS circuits
+# for this to make sense!  See big-servers.txt in the docs subdirectory
+# for more information and ideas on how to use this feature.
+
+MINSUPPLIES 1
+
+# --------------------------------------------------------------------------
+# SHUTDOWNCMD "<command>"
+#
+# upsmon runs this command when the system needs to be brought down.
+#
+# This should work just about everywhere ... if it doesn't, well, change it.
+
+SHUTDOWNCMD "/sbin/shutdown -h +0"
+
+# --------------------------------------------------------------------------
+# NOTIFYCMD <command>
+#
+# upsmon calls this to send messages when things happen
+#
+# This command is called with the full text of the message as one argument.
+# The environment string NOTIFYTYPE will contain the type string of
+# whatever caused this event to happen.
+#
+# Note that this is only called for NOTIFY events that have EXEC set with
+# NOTIFYFLAG.  See NOTIFYFLAG below for more details.
+#
+# Making this some sort of shell script might not be a bad idea.  For more
+# information and ideas, see pager.txt in the docs directory.
+#
+# Example:
+# NOTIFYCMD /usr/local/ups/bin/notifyme
+
+# --------------------------------------------------------------------------
+# POLLFREQ <n> 
+#
+# Polling frequency for normal activities, measured in seconds.
+#
+# Adjust this to keep upsmon from flooding your network, but don't make 
+# it too high or it may miss certain short-lived power events.
+
+POLLFREQ 5
+
+# --------------------------------------------------------------------------
+# POLLFREQALERT <n>
+#
+# Polling frequency in seconds while UPS on battery.
+#
+# You can make this number lower than POLLFREQ, which will make updates
+# faster when any UPS is running on battery.  This is a good way to tune 
+# network load if you have a lot of these things running.  
+#
+# The default is 5 seconds for both this and POLLFREQ.
+
+POLLFREQALERT 5
+
+# --------------------------------------------------------------------------
+# HOSTSYNC - How long upsmon will wait before giving up on another upsmon
+#
+# The master upsmon process uses this number when waiting for slaves to
+# disconnect once it has set the forced shutdown (FSD) flag.  If they
+# don't disconnect after this many seconds, it goes on without them.
+#
+# Similarly, upsmon slave processes wait up to this interval for the 
+# master upsmon to set FSD when a UPS they are monitoring goes critical -
+# that is, on battery and low battery.  If the master doesn't do its job,
+# the slaves will shut down anyway to avoid damage to the file systems.
+#
+# This "wait for FSD" is done to avoid races where the status changes
+# to critical and back between polls by the master.
+
+HOSTSYNC 15
+
+# --------------------------------------------------------------------------
+# DEADTIME - Interval to wait before declaring a stale ups "dead"
+#
+# upsmon requires a UPS to provide status information every few seconds
+# (see POLLFREQ and POLLFREQALERT) to keep things updated.  If the status
+# fetch fails, the UPS is marked stale.  If it stays stale for more than
+# DEADTIME seconds, the UPS is marked dead.
+#
+# A dead UPS that was last known to be on battery is assumed to have gone
+# to a low battery condition.  This may force a shutdown if it is providing
+# a critical amount of power to your system.
+#
+# Note: DEADTIME should be a multiple of POLLFREQ and POLLFREQALERT.
+# Otherwise you'll have "dead" UPSes simply because upsmon isn't polling
+# them quickly enough.  Rule of thumb: take the larger of the two
+# POLLFREQ values, and multiply by 3.
+
+DEADTIME 15
+
+# --------------------------------------------------------------------------
+# POWERDOWNFLAG - Flag file for forcing UPS shutdown on the master system
+#
+# upsmon will create a file with this name in master mode when it's time
+# to shut down the load.  You should check for this file's existence in
+# your shutdown scripts and run 'upsdrvctl shutdown' if it exists.
+#
+# See the shutdown.txt file in the docs subdirectory for more information.
+
+POWERDOWNFLAG /etc/killpower
+
+# --------------------------------------------------------------------------
+# NOTIFYMSG - change messages sent by upsmon when certain events occur
+#
+# You can change the stock messages to something else if you like.
+#
+# NOTIFYMSG <notify type> "message"
+#
+# NOTIFYMSG ONLINE "UPS %s is getting line power"
+# NOTIFYMSG ONBATT "Someone pulled the plug on %s"
+#
+# Note that %s is replaced with the identifier of the UPS in question.
+#
+# Possible values for <notify type>:
+#
+# ONLINE   : UPS is back online
+# ONBATT   : UPS is on battery
+# LOWBATT  : UPS has a low battery (if also on battery, it's "critical")
+# FSD      : UPS is being shutdown by the master (FSD = "Forced Shutdown")
+# COMMOK   : Communications established with the UPS
+# COMMBAD  : Communications lost to the UPS
+# SHUTDOWN : The system is being shutdown
+# REPLBATT : The UPS battery is bad and needs to be replaced
+# NOCOMM   : A UPS is unavailable (can't be contacted for monitoring)
+
+# --------------------------------------------------------------------------
+# NOTIFYFLAG - change behavior of upsmon when NOTIFY events occur
+#
+# By default, upsmon sends walls (global messages to all logged in users)
+# and writes to the syslog when things happen.  You can change this.
+#
+# NOTIFYFLAG <notify type> <flag>[+<flag>][+<flag>] ...
+#
+# NOTIFYFLAG ONLINE SYSLOG
+# NOTIFYFLAG ONBATT SYSLOG+WALL+EXEC
+#
+# Possible values for the flags:
+#
+# SYSLOG - Write the message in the syslog 
+# WALL   - Write the message to all users on the system
+# EXEC   - Execute NOTIFYCMD (see above) with the message
+# IGNORE - Don't do anything
+#
+# If you use IGNORE, don't use any other flags on the same line.
+
+# --------------------------------------------------------------------------
+# RBWARNTIME - replace battery warning time in seconds
+#
+# upsmon will normally warn you about a battery that needs to be replaced
+# every 43200 seconds, which is 12 hours.  It does this by triggering a
+# NOTIFY_REPLBATT which is then handled by the usual notify structure
+# you've defined above.
+# 
+# If this number is not to your liking, override it here.
+
+RBWARNTIME 43200
+
+# --------------------------------------------------------------------------
+# NOCOMMWARNTIME - no communications warning time in seconds
+#
+# upsmon will let you know through the usual notify system if it can't
+# talk to any of the UPS entries that are defined in this file.  It will
+# trigger a NOTIFY_NOCOMM by default every 300 seconds unless you 
+# change the interval with this directive.
+
+NOCOMMWARNTIME 300
+
+# --------------------------------------------------------------------------
+# FINALDELAY - last sleep interval before shutting down the system
+#
+# On a master, upsmon will wait this long after sending the NOTIFY_SHUTDOWN
+# before executing your SHUTDOWNCMD.  If you need to do something in between
+# those events, increase this number.  Remember, at this point your UPS is 
+# almost depleted, so don't make this too high.
+#
+# Alternatively, you can set this very low so you don't wait around when
+# it's time to shut down.  Some UPSes don't give much warning for low
+# battery and will require a value of 0 here for a safe shutdown.
+#
+# Note: If FINALDELAY on the slave is greater than HOSTSYNC on the master,
+# the master will give up waiting for the slave to disconnect.
+
+FINALDELAY 5

additional/config/upssched.conf

@@ -0,0 +1,95 @@
+# Network UPS Tools - upssched.conf sample file
+#
+# ============================================================================
+#
+# CMDSCRIPT <scriptname>
+#
+# This script gets called to invoke commands for timers that trigger.
+# It is given a single argument - the <timername> in your
+# AT ... START-TIMER defines.
+#
+# *** This must be defined *before* the first AT line.  Otherwise the
+#     program will complain and exit without doing anything.
+#
+# A shell script with a big case..esac construct should work nicely for this.
+# An example has been provided to help you get started.
+
+CMDSCRIPT /usr/sbin/upssched-cmd
+
+# ============================================================================
+#
+# PIPEFN <filename>
+#
+# This sets the file name of the FIFO that will pass communications between
+# processes to start and stop timers.  This should be set to some path where
+# normal users can't create the file, due to the possibility of symlinking
+# and other evil.
+#
+# NOTE: if you are running Solaris or similar, the permissions that upssched
+# sets on this file *are not enough* to keep you safe.  If your OS ignores
+# the permissions on a FIFO, then you MUST put this in a protected directory!
+#
+# Another thing to think about: upsmon doesn't run the NOTIFYCMD as root
+# unless you run it with -p.  So, upssched will probably run as nobody
+# or similar unless you give upsmon another user with -u.  Either way,
+# you have to set PIPEFN to something that ONLY the resulting upsmon 
+# user can access.
+#
+# This is commented out by default to make you visit this file and think
+# about how your system works before potentially opening a hole.
+#
+# PIPEFN /var/run/upssched.pipe
+
+# ============================================================================
+#
+# AT <notifytype> <upsname> <command>
+#
+# Define a handler for a specific event <notifytype> on UPS <upsname>.
+#
+# <upsname> can be the special value * to apply this handler to every
+# possible value of <upsname>.
+#
+# Run the command <command> via your CMDSCRIPT when it happens. 
+#
+# Note that any AT that matches both the <notifytype> and the <upsname> 
+# for the current event will be used.
+
+# ============================================================================
+#
+# Possible AT commands
+#
+# - START-TIMER <timername> <interval>
+#
+#   Start a timer called <timername> that will trigger after <interval>
+#   seconds, calling your CMDSCRIPT with <timername> as the first
+#   argument.
+#
+#   Example:
+#   Start a timer that'll execute when any UPS (*) has been gone 10 seconds
+#
+#   AT COMMBAD * START-TIMER upsgone 10
+
+#   -----------------------------------------------------------------------
+#
+# - CANCEL-TIMER <timername> [cmd]
+#
+#   Cancel a running timer called <timername>, if possible. If the timer
+#   has passed then pass the optional argument <cmd> to CMDSCRIPT.
+#
+#   Example:
+#   If a specific UPS (myups@localhost) comes back online, then stop the 
+#   timer before it triggers
+# 
+#   AT COMMOK myups@localhost CANCEL-TIMER upsgone
+
+#   -----------------------------------------------------------------------
+#
+# - EXECUTE <command>
+#
+#   Immediately pass <command> as an argument to CMDSCRIPT.
+#
+#   Example:
+#   If any UPS (*) reverts to utility power, then execute
+#   'ups-back-on-line' via CMDSCRIPT.
+#
+#   AT ONLINE * EXECUTE ups-back-on-line

additional/config/upsset.conf

@@ -0,0 +1,36 @@
+# Network UPS Tools - upsset.conf sample file
+#
+# This file is provided to ensure that you do not expose your upsd server
+# to the world upon installing the CGI programs.  Specifically, it keeps
+# the upsset.cgi program from running until you have assured it that you 
+# have secured your web server's CGI directory.
+#
+# By default, your web server will probably let anyone access upsset.cgi
+# once it is installed.  This means that anyone could attempt to crack
+# upsd logins since they would appear to be coming from your web server, 
+# rather than the outside world, slipping through any ACL/ACCESS definitions.
+#
+# For this reason, you *MUST* first secure your CGI programs before
+# enabling upsset in this configuration file.  If you can't do this in
+# your web server, then you should *not* run this program.
+#
+# For Apache, the .htaccess file can be used in the directory with the
+# programs.  You'll need something like this:
+#
+# 	<Files upsset.cgi>
+#	deny from all
+#	allow from your.network.addresses
+#	</Files>
+#
+# You will probably have to set "AllowOverride Limit" for this directory in
+# your server-level configuration file as well.
+#
+# If this doesn't make sense, then stop reading and leave this program alone.
+#
+# Assuming you have all this done (and it works), then you may uncomment 
+# the line below and start using upsset.cgi through your web browser.
+#
+
+###
+### I_HAVE_SECURED_MY_CGI_DIRECTORY
+###

contriborbase

@@ -0,0 +1 @@
+sme10

createlinks

@@ -0,0 +1,24 @@
+#!/usr/bin/perl -w
+
+use esmith::Build::CreateLinks  qw(:all);
+
+my @events = qw(bootstrap-console-save console-save post-install post-upgrade e-smith-nutUPS-update);
+
+templates2events("/etc/sysconfig/ups", @events);
+templates2events("/usr/lib/systemd/system/nut-server.service.d/50koozali.conf", @events);
+templates2events("/usr/lib/systemd/system/nut-monitor.service.d/50koozali.conf", @events);
+
+foreach (qw(ups.conf upsd.users upsmon.conf upssched.conf))
+{
+    templates2events("/etc/ups/$_", @events);
+}
+
+foreach (qw(bootstrap-console-save console-save e-smith-nutUPS-update))
+{
+    templates2events("/etc/ups/upsd.conf", $_);
+}
+
+my $event="e-smith-nutUPS-update";
+safe_symlink("try-restart", "root/etc/e-smith/events/$event/services2adjust/nut");
+templates2events("/etc/systemd/system-preset/49-koozali.preset", $event);
+event_link("systemd-default", $event, "06");

e-smith-nutUPS.spec

@@ -0,0 +1,316 @@
+# $Id: e-smith-nutUPS.spec,v 1.16 2022/12/26 03:29:15 jpp Exp $
+
+Summary: SME server - nut UPS interaction module
+%define name e-smith-nutUPS
+Name: %{name}
+%define version 2.6.0
+%define release 14
+Version: %{version}
+Release: %{release}%{?dist}
+License: GPL
+Group: Networking/Daemons
+Source: %{name}-%{version}.tar.xz
+
+BuildRoot: /var/tmp/%{name}-%{version}-%{release}-buildroot
+Requires: nut nut-client daemontools
+Obsoletes: neon <= 0.25.5
+Requires: e-smith-lib >= 1.15.1-16
+BuildArchitectures: noarch
+BuildRequires: e-smith-devtools
+AutoReqProv: no
+
+%description
+A module which configures the Network UPS Tools suite for operation with
+the SME server software.
+
+%changelog
+* Wed Jul 12 2023 cvs2git.sh aka Brian Read <brianr@koozali.org> 2.6.0-14.sme
+- Roll up patches and move to git repo [SME: 12338]
+
+* Wed Jul 12 2023 BogusDateBot
+- Eliminated rpmbuild "bogus date" warnings due to inconsistent weekday,
+  by assuming the date is correct and changing the weekday.
+
+* Sun Dec 25 2022 Jean-Philippe Pialasse <tests@pialasse.com> 2.6.0-13.sme
+- fix server failing if set as netserver [SME: 12287]
+- remove log noise for tmp files
+
+* Mon Jun 21 2021 Terry Fage <tfage@yahoo.com.au> 2.6.0-12.sme
+- Misspelling in /usr/lib/systemd/system/nut.service file [SME: 11633]
+
+* Tue Mar 30 2021 Terry Fage <tfage@yahoo.com.au> 2.6.0-11.sme
+- fix start ordering nut.service [SME: 11488]
+
+* Sat Mar 27 2021 Terry Fage <tfage@yahoo.com.au> 2.6.0-10.sme
+- fix ExecStartPre path for /usr/lib/tmpfiles.d/nut-run.conf [SME: 11488]
+
+* Thu Mar 25 2021 Terry Fage <tfage@yahoo.com.au> 2.6.0-9.sme
+- fix ExecStartPre path for nut.service [SME: 11488]
+
+* Mon Dec 07 2020 Jean-Philipe Pialasse <tests@pialasse.com> 2.6.0-8.sme
+- fix template path for monitor [SME: 9423]
+
+* Sun Nov 29 2020 John Crisp <jcrisp@safeandsoundit.co.uk> 2.6.0-6.sme
+- Fix preset line endings in 49-koozali.preset [SME: 11215]
+
+* Wed Nov 18 2020 Jean-Philipe Pialasse <tests@pialasse.com> 2.6.0-5.sme
+- add update event to avoid reboot [SME: 11146]
+- adapt nut UPS for systemd [SME: 9423]
+
+* Fri Feb 05 2016 stephane de Labrusse <stephdl@de-labrusse.fr> 2.6.0-2.sme
+- Initial release to sme10
+
+* Sat Feb 07 2015 stephane de Labrusse <stephdl@de-labrusse.fr> 2.4.0-9.sme
+- Allow the admin upsd in /etc/hosts.allow [SME: 8826]
+
+* Tue Feb 03 2015 stephane de Labrusse <stephdl@de-labrusse.fr> 2.4.0-7.sme
+- Creation Admin Privilege for use of upscmd & upsrw [SME: 8826]
+- Remove obsolete directives {allowfrom} [SME: 8793]
+
+* Sun Jan 25 2015 stephane de Labrusse <stephdl@de-labrusse.fr> 2.4.0-5.sme
+- Access property created (default value is 'localhost') [SME: 8793]
+
+* Thu Jan 22 2015 stephane de Labrusse <stephdl@de-labrusse.fr> 2.4.0-3.sme
+- Remove obsolete directives {ACL,ACCEPT,REJECT} and switch to LISTEN 
+- in /etc/ups/upsd.conf
+- Allow NUT in /etc/hosts.allow and in /etc/services [SME: 8793]
+- Code change from  Daniel B.<daniel@firewall-services.com>
+
+* Thu Jan 31 2013 Shad L. Lords <slords@mail.com> 2.4.0-2.sme
+- Obsolete el5 packages that used to be required [SME: 7273]
+
+* Thu Jan 31 2013 Shad L. Lords <slords@mail.com> 2.4.0-1.sme
+- Roll new stream for sme9
+
+* Sun May 17 2009 Jonathan Martens <smeserver-contribs@snetram.nl> 2.2.0-2.sme
+- Fix another instance of ups model for new version of nut [SME: 4750]
+
+* Tue Oct 7 2008 Shad L. Lords <slords@mail.com> 2.2.0-1.sme
+- Roll new stream to separate sme7/sme8 trees [SME: 4633]
+
+* Tue Jan 08 2008 Stephen Noble <support@dungog.net> 1.2.0-17
+- Start rc7.d/S38nut up from S15 [SME: 3592]
+
+* Fri Nov 30 2007 Gavin Weight <gweight@gmail.com> 1.2.0-16
+- Fix use of uninitialized value in nutModel migrate.  [SME: 3597]
+
+* Sun Oct 7 2007 Shad L. Lords <slords@mail.com> 1.2.0-15
+- Fix ups model for new version of nut [SME: 3457]
+
+* Sun Jun 3 2007 Stephen Noble <support@dungog.net> 1.2.0-14
+- Fix mfr & mdl options in ups.conf [SME: 2791]
+
+* Fri Jun 1 2007 Stephen Noble <support@dungog.net> 1.2.0-13
+- Add mfr & mdl options to ups.conf [SME: 2791]
+
+* Fri Jun 1 2007 Stephen Noble <support@dungog.net> 1.2.0-12
+- Only use Type if model=genericups & type is defined [SME: 2748]
+
+* Sun Apr 29 2007 Shad L. Lords <slords@mail.com>
+- Clean up spec so package can be built by koji/plague
+
+* Tue Apr 10 2007 Stephen Noble <support@dungog.net> 1.2.0-10
+- Only use Type if model=genericups [SME: 2748]
+
+* Fri Apr 06 2007 Shad L. Lords <slords@mail.com> 1.2.0-9
+- Fix perms on config files [SME: 2712]
+
+* Fri Jan 19 2007 Shad L. Lords <slords@mail.com> 1.2.0-8
+- Don't expand upsd.conf in post-{install,upgrade}
+
+* Thu Jan 18 2007 Shad L. Lords <slords@mail.com> 1.2.0-7
+- Fix password generation and simplify [SME: 2323]
+
+* Sat Jan 13 2007 Shad L. Lords <slords@mail.com> 1.2.0-6
+- Add upstype option to ups.conf [SME: 2286]
+
+* Thu Jan 04 2007 Shad L. Lords <slords@mail.com> 1.2.0-5
+- Actually call the notify script on ups events. [SME: 1722]
+- Allow nut to be a client to another master server. [SME: 2231]
+
+* Thu Dec 21 2006 Shad L. Lords <slords@mail.com> 1.2.0-4
+- Make password secure for ups users
+- Allow local network to monitor ups as slaves
+- Make localhost master for ups
+- Make startup/shutdown scripts use upsdrvctl so poweroff works
+
+* Thu Dec 07 2006 Shad L. Lords <slords@mail.com>
+- Update to new release naming.  No functional changes.
+- Make Packager generic
+
+* Sun May 28 2006 Charlie Brady <charlie_brady@mitel.com> 1.2.0-02
+- Fix perms on upsd.conf [SME: 1473]
+
+* Wed Mar 15 2006 Charlie Brady <charlie_brady@mitel.com> 1.2.0-01
+- Roll stable stream version. [SME: 1016]
+
+* Thu Feb  2 2006 Gordon Rowell <gordonr@gormand.com.au> 1.1.0-10
+- Added db default to match last change [SME: 26]
+
+* Thu Feb  2 2006 Charlie Brady <charlie_brady@mitel.com> 1.1.0-09
+- Change default model from hidups to newhidups. [SME: 26]
+
+* Wed Feb 01 2006 Charlie Brady <charlie_brady@mitel.com> 1.1.0-08
+- Ensure that device node has correct ownership. [SME: 619]
+
+* Wed Nov 30 2005 Gordon Rowell <gordonr@gormand.com.au> 1.1.0-07
+- Bump release number only
+
+* Tue Aug 16 2005 Charlie Brady <charlieb@e-smith.com>
+- [1.1.0-06]
+- Match permissions on /etc/sysconfig/ups to those of the nut RPM.
+
+* Mon Jul 25 2005 Charlie Brady <charlieb@e-smith.com>
+- [1.1.0-05]
+- Remove unused /etc/usb/usb.usermap template fragment.
+- Add nut db entries to default configuration (Shad).
+- Add missing templates.metadata files for all templated
+  files. [MN00064130]
+
+* Tue Jul 12 2005 Charlie Brady <charlieb@e-smith.com>
+- [1.1.0-04]
+- Use generic_template_expand action in place of nutUPS-conf.
+  [MN00064130]
+
+* Tue Jul 12 2005 Charlie Brady <charlieb@e-smith.com>
+- [1.1.0-03]
+- Port to version 2.0 of nut (contributed by Shad Lords).
+- Change nutups user to nut to confirm with new package
+- Upgrade templates to support new 2.0 format [SF: 1226389]
+
+* Thu Aug 21 2003 Charlie Brady <charlieb@e-smith.com>
+- [1.1.0-02]
+- Replace nutUPS-conf-startup action with default db fragments.
+  [charlieb 9553]
+
+* Thu Aug 21 2003 Charlie Brady <charlieb@e-smith.com>
+- [1.1.0-01]
+- Changing version to development stream number - 1.1.0
+
+* Thu Jun 26 2003 Charlie Brady <charlieb@e-smith.com>
+- [1.0.0-01]
+- Creating stable version stream - 1.0.0
+
+* Wed Jun  4 2003 Charlie Brady <charlieb@e-smith.com>
+- [0.0.3-06]
+- Create 'nutups' user via create-system-user. [charlieb 6033]
+
+* Fri May  9 2003 Gordon Rowell <gordonr@e-smith.com>
+- [0.0.3-05]
+- Removed depedency on e-smith-email [gordonr 8405]
+
+* Fri Apr 25 2003 Charlie Brady <charlieb@e-smith.com>
+- [0.0.3-04]
+- Change group and permissions of various configuration files, so that
+  files can be reloaded by programs running non-root. This is a merge
+  of Shad Lord's contributed code and my changes to use group read
+  permission. [charlieb 8405]
+
+* Fri Apr 25 2003 Tony Clayton <apc@e-smith.com>
+- [0.0.3-03]
+- Don't expand rc.modules template from nutUPS-conf [tonyc 2753]
+
+* Fri Apr 25 2003 Charlie Brady <charlieb@e-smith.com>
+- [0.0.3-02]
+- Change group of nutUPS.notify script to nutups. [charlieb 8530]
+
+* Wed Apr 16 2003 Tony Clayton <apc@e-smith.com>
+- [0.0.3-01]
+- Remove /etc/rc.modules altogether [tonyc 6556]
+
+* Tue Mar 18 2003 Lijie Deng <lijied@e-smith.com>
+- [0.0.2-12]
+- Delete ./etc/rc.modules/template-begin,
+  and modified %build [lijied 3295]
+
+* Thu Jan 16 2003 Tony Clayton <apc@e-smith.com>
+- [0.0.2-11]
+- fix rc.modules usb drivers again [tonyc 2753]
+
+* Mon Jan 13 2003 Tony Clayton <apc@e-smith.com>
+- [0.0.2-10]
+- fix rc.modules usb drivers to load conditionally [tonyc 2753]
+
+* Mon Jan 13 2003 Tony Clayton <apc@e-smith.com>
+- [0.0.2-09]
+- send stdout/stderr to /dev/null when loading usb modules [tonyc 2753]
+
+* Mon Jan 13 2003 Tony Clayton <apc@e-smith.com>
+- [0.0.2-08]
+- really adding usb* modules in rc.modules [tonyc 2753]
+
+* Mon Jan 13 2003 Tony Clayton <apc@e-smith.com>
+- [0.0.2-07]
+- load usb* modules in rc.modules for hidups support
+- add header to template-begin [tonyc 2753]
+
+* Fri Jan 10 2003 Tony Clayton <apc@e-smith.com>
+- [0.0.2-06]
+- fix NOTIFYFLAG entries in upsmon.conf [tonyc 2753]
+- turn off nut service by default [tonyc 2753]
+
+* Thu Dec  5 2002 Charlie Brady <charlieb@e-smith.com>
+- [0.0.2-05]
+- Move mknod of device node to %post script. It can't run in %pre, because
+  the enclosing directory has not yet been pulled out of the RPM archive.
+
+* Thu Dec  5 2002 Charlie Brady <charlieb@e-smith.com>
+- [0.0.2-04]
+- Fix syntax errors in one of the upsmon.conf template fragments.
+- Add ups runtime state directory. Create hiddev device node with
+  appropriate permissions inside that directory.
+
+* Wed Nov 27 2002 Charlie Brady <charlieb@e-smith.com>
+- [0.0.2-03]
+- Change configuration so that most UPS events are logged only to
+  syslog, but SHUTDOWN is done using "signal-event". Response
+  to UPS events can be tuned via config DB entries.
+
+* Tue Nov 19 2002 Charlie Brady <charlieb@e-smith.com>
+- [0.0.2-02]
+- Add /etc/rc.d/init.d/nut symlink so that service starts up.
+- Fix up a few broken templates.
+
+* Mon Nov 18 2002 Charlie Brady <charlieb@e-smith.com>
+- [0.0.2-01]
+- Initial
+
+%prep
+%setup
+
+rm -rf root/etc/rc.d/init.d/nut root/etc/rc.d/rc7.d/S38nut 
+mkdir -p root/usr/lib/systemd/system/nut-monitor.service.d root/usr/lib/systemd/system/nut-server.service.d
+
+
+%build
+perl createlinks
+
+%install
+rm -rf $RPM_BUILD_ROOT
+(cd root   ; find . -depth -print | cpio -dump $RPM_BUILD_ROOT)
+rm -f %{name}-%{version}-%{release}-filelist
+/sbin/e-smith/genfilelist $RPM_BUILD_ROOT \
+    | sed -e '/nutUPS.notify/s/root,root/root,nut/' \
+    > %{name}-%{version}-%{release}-filelist
+echo '%dir %attr(750,nut,nut) /var/lib/ups' \
+  >>  %{name}-%{version}-%{release}-filelist
+echo '%ghost %attr(640,nut,nut) /var/lib/ups/hiddev0' \
+  >>  %{name}-%{version}-%{release}-filelist
+mkdir -p $RPM_BUILD_ROOT/var/lib/ups/
+touch $RPM_BUILD_ROOT/var/lib/ups/hiddev0
+
+%pre
+/sbin/e-smith/create-system-user nut 57 'NUT UPS user' /var/lib/ups /bin/false
+
+%post
+if [ \! -e /var/lib/ups/hiddev0 ]
+then
+ mknod /var/lib/ups/hiddev0 c 180 96
+fi
+chown nut.nut  /var/lib/ups/hiddev0
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files -f %{name}-%{version}-%{release}-filelist
+%defattr(-,root,root)

root/etc/e-smith/db/configuration/defaults/nut/AdminUser

@@ -0,0 +1 @@
+disabled

root/etc/e-smith/db/configuration/defaults/nut/Model

@@ -0,0 +1 @@
+usbhid-ups

root/etc/e-smith/db/configuration/defaults/nut/access

@@ -0,0 +1 @@
+localhost

root/etc/e-smith/db/configuration/defaults/nut/status

@@ -0,0 +1 @@
+disabled

root/etc/e-smith/db/configuration/defaults/nut/type

@@ -0,0 +1 @@
+service

root/etc/e-smith/db/configuration/migrate/nutModel

@@ -0,0 +1,6 @@
+{
+    my $nutmod = $DB->get_prop('nut', 'Model');
+    return unless $nutmod;
+    $DB->set_prop('nut', 'Model', 'usbhid-ups') if ($nutmod eq 'newhidups');
+}
+

root/etc/e-smith/db/configuration/migrate/nutPass

@@ -0,0 +1,8 @@
+{
+    use MIME::Base64 qw(encode_base64);
+
+    my $nutrec = $DB->get('nut') || $DB->new_record('nut', {type => 'service'});
+    $nutrec->set_prop('MasterPass', sprintf("%15.0f", int( (1000000000000000) * rand() ))) if not $nutrec->prop('MasterPass');
+    $nutrec->set_prop('SlavePass', sprintf("%15.0f", int( (1000000000000000) * rand() ))) if not $nutrec->prop('SlavePass');
+    $nutrec->set_prop('AdminPass', sprintf("%15.0f", int( (1000000000000000) * rand() ))) if not $nutrec->prop('AdminPass');
+}

root/etc/e-smith/templates.metadata/etc/sysconfig/ups

@@ -0,0 +1 @@
+PERMS=0644

root/etc/e-smith/templates.metadata/etc/ups/ups.conf

@@ -0,0 +1,3 @@
+UID="root"
+GID="nut"
+PERMS=0640

root/etc/e-smith/templates.metadata/etc/ups/upsd.conf

@@ -0,0 +1,3 @@
+UID="root"
+GID="nut"
+PERMS=0640

root/etc/e-smith/templates.metadata/etc/ups/upsd.users

@@ -0,0 +1,3 @@
+UID="root"
+GID="nut"
+PERMS=0640

root/etc/e-smith/templates.metadata/etc/ups/upsmon.conf

@@ -0,0 +1,3 @@
+UID="root"
+GID="nut"
+PERMS=0640

root/etc/e-smith/templates.metadata/etc/ups/upssched.conf

@@ -0,0 +1,3 @@
+UID="root"
+GID="nut"
+PERMS=0640

root/etc/e-smith/templates/etc/hosts.allow/upsd

@@ -0,0 +1,3 @@
+{
+        $DB->hosts_allow_spec('nut','nut');
+}

root/etc/e-smith/templates/etc/hosts.allow/upsd_admin_privileges

@@ -0,0 +1,11 @@
+{
+return "# The upsd admin is not allowed" if ($nut{AdminUser} ne 'enabled');
+return "# The upsd admin has no password" if (($nut{AdminPass} || '') eq '');
+return "# The upsd admin is not allowed when nut access is set to public" if $nut{access} eq 'public';
+
+my $upsd = $DB->hosts_allow_spec('nut','upsd');
+$upsd =~ s|upsd:|upsd: admin op |;
+
+$OUT .= qq(#Allow the Admin User of upsd
+$upsd : ALLOW) if ($nut{status} eq 'enabled');
+}

root/etc/e-smith/templates/etc/services/30Nut

@@ -0,0 +1,3 @@
+#Nut Service
+nut              3493/tcp                       # Network UPS Tools
+nut              3493/udp                       # Network UPS Tools

root/etc/e-smith/templates/etc/sysconfig/ups/MODEL

@@ -0,0 +1 @@
+MODEL=upsdrvctl

root/etc/e-smith/templates/etc/sysconfig/ups/SERVER

@@ -0,0 +1 @@
+SERVER={ $nut{Master} || 'yes' }

root/etc/e-smith/templates/etc/systemd/system-preset/49-koozali.preset/70nutUPS

@@ -0,0 +1,16 @@
+# nut UPS specific subservices
+{
+$nutstatus = $nut{status} || 'disabled';
+$master = $nut{Master} || 'yes';
+
+if ($nutstatus eq 'enabled') {
+	$OUT .= "enable	nut-server.service\n" if ($master eq  'yes');
+	$OUT .= "disable nut-server.service\n" unless ($master eq  'yes');
+	$OUT .= "enable	nut-monitor.service\n";
+  }
+else
+  {
+        $OUT .= "disable nut-server.service\n";
+        $OUT .= "disable nut-monitor.service\n";
+  }
+}

root/etc/e-smith/templates/etc/ups/ups.conf/UPS

@@ -0,0 +1,16 @@
+{
+    my $model = $nut{Model} || "usbhid-ups";
+    my $device = $nut{Device} || "/var/lib/ups/hiddev0";
+    my $type = $nut{Type};
+    my $mfr = $nut{mfr};
+    my $mdl = $nut{mdl};
+    $OUT .= "[UPS]\n";
+    $OUT .= "\tdriver = $model\n";
+    if  ($model eq 'genericups')
+    { 
+      $OUT .= "\tupstype = $type\n" if defined $type;
+      $OUT .= "\tmfr = $mfr\n" if defined $mfr;
+      $OUT .= "\tmodel = $mdl\n" if defined $mdl;
+    }
+    $OUT .= "\tport = $device\n";
+}

root/etc/e-smith/templates/etc/ups/upsd.conf/10Listen_Local_Network

@@ -0,0 +1,6 @@
+{
+my $access  = $nut{access} || 'localhost';
+
+$OUT .= "LISTEN 127.0.0.1";
+$OUT .= "\nLISTEN $LocalIP" if ($access eq 'private');
+}

root/etc/e-smith/templates/etc/ups/upsd.users/monitor

@@ -0,0 +1,8 @@
+       [upsmaster]
+               password  = { $nut{MasterPass} }
+               upsmon master
+
+       [upsslave]
+               password  = { $nut{SlavePass} }
+               upsmon slave
+

root/etc/e-smith/templates/etc/ups/upsd.users/upsd_administrative_privileges

@@ -0,0 +1,14 @@
+{
+    # create admin user for upsd to allow setting of
+    # UPS parameters via upsrw
+
+    $OUT .= "";
+    return unless (($nut{AdminUser} || 'disabled') eq 'enabled');
+    return unless (($nut{AdminPass} || '') ne '');
+
+    $OUT .= "\n";
+    $OUT .= "       [admin]\n";
+    $OUT .= "               password  = $nut{AdminPass}\n";
+    $OUT .= "               actions   = set\n";
+    $OUT .= "               instcmds  = all\n";
+}

root/etc/e-smith/templates/etc/ups/upsmon.conf/DEADTIME

@@ -0,0 +1 @@
+DEADTIME 15

root/etc/e-smith/templates/etc/ups/upsmon.conf/FINALDELAY

@@ -0,0 +1 @@
+FINALDELAY 5

root/etc/e-smith/templates/etc/ups/upsmon.conf/HOSTSYNC

@@ -0,0 +1 @@
+HOSTSYNC 15

root/etc/e-smith/templates/etc/ups/upsmon.conf/MINSUPPLIES

@@ -0,0 +1 @@
+MINSUPPLIES 1

root/etc/e-smith/templates/etc/ups/upsmon.conf/MONITOR

@@ -0,0 +1,7 @@
+{
+    if ( ($nut{Master} || 'yes') ne 'no' ) {
+	$OUT = "MONITOR UPS\@localhost 1 upsmaster $nut{MasterPass} master";
+    } else {
+	$OUT = "MONITOR $nut{SlaveUPS} 1 upsslave $nut{SlavePass} slave";
+    }
+}

root/etc/e-smith/templates/etc/ups/upsmon.conf/NOCOMMWARNTIME

@@ -0,0 +1 @@
+NOCOMMWARNTIME 300

root/etc/e-smith/templates/etc/ups/upsmon.conf/NOTIFYCMD

@@ -0,0 +1 @@
+NOTIFYCMD /sbin/e-smith/nutUPS.notify

root/etc/e-smith/templates/etc/ups/upsmon.conf/NOTIFYFLAG

@@ -0,0 +1,9 @@
+NOTIFYFLAG COMMBAD  SYSLOG+WALL+EXEC
+NOTIFYFLAG COMMOK   SYSLOG+WALL+EXEC
+NOTIFYFLAG FSD      SYSLOG+WALL+EXEC
+NOTIFYFLAG LOWBATT  SYSLOG+WALL+EXEC
+NOTIFYFLAG NOCOMM   SYSLOG+WALL+EXEC
+NOTIFYFLAG ONBATT   SYSLOG+WALL+EXEC
+NOTIFYFLAG ONLINE   SYSLOG+WALL+EXEC
+NOTIFYFLAG REPLBATT SYSLOG+WALL+EXEC
+NOTIFYFLAG SHUTDOWN SYSLOG+WALL+EXEC

root/etc/e-smith/templates/etc/ups/upsmon.conf/POLLFREQ

@@ -0,0 +1 @@
+POLLFREQ 5

root/etc/e-smith/templates/etc/ups/upsmon.conf/POLLFREQALERT

@@ -0,0 +1 @@
+POLLFREQALERT 5

root/etc/e-smith/templates/etc/ups/upsmon.conf/POWERDOWNFLAG

@@ -0,0 +1 @@
+POWERDOWNFLAG /etc/killpower

root/etc/e-smith/templates/etc/ups/upsmon.conf/RBWARNTIME

@@ -0,0 +1 @@
+RBWARNTIME 43200

root/etc/e-smith/templates/etc/ups/upsmon.conf/SHUTDOWNCMD

@@ -0,0 +1 @@
+SHUTDOWNCMD "/sbin/e-smith/signal-event halt"

root/etc/e-smith/templates/etc/ups/upssched.conf/00README

@@ -0,0 +1 @@
+# For more information see "man upssched.conf"

root/etc/e-smith/templates/usr/lib/systemd/system/nut-monitor.service.d/50koozali.conf/20unit

@@ -0,0 +1,3 @@
+[Unit]
+PartOf=nut.service
+After=nut.service  network-online.target

root/etc/e-smith/templates/usr/lib/systemd/system/nut-monitor.service.d/50koozali.conf/40service

@@ -0,0 +1,4 @@
+[Service]
+ExecStartPre=
+ExecStartPre=-/usr/bin/systemd-tmpfiles --create /usr/lib/tmpfiles.d/nut-run.conf
+ExecStartPre=/sbin/e-smith/service-status nut

root/etc/e-smith/templates/usr/lib/systemd/system/nut-monitor.service.d/50koozali.conf/80install

@@ -0,0 +1,2 @@
+[Install]
+WantedBy=sme-server.target

root/etc/e-smith/templates/usr/lib/systemd/system/nut-server.service.d/50koozali.conf/20unit

@@ -0,0 +1,4 @@
+[Unit]
+PartOf=nut.service
+After=nut.service  network-online.target
+

root/etc/e-smith/templates/usr/lib/systemd/system/nut-server.service.d/50koozali.conf/40service

@@ -0,0 +1,2 @@
+[Service]
+ExecStartPre=/sbin/e-smith/service-status nut

root/etc/e-smith/templates/usr/lib/systemd/system/nut-server.service.d/50koozali.conf/80install

@@ -0,0 +1,2 @@
+[Install]
+WantedBy=sme-server.target

root/sbin/e-smith/nutUPS.notify

@@ -0,0 +1,6 @@
+#! /bin/sh
+# UPS notify script.
+
+/bin/mail -s "$UPSNAME: $NOTIFYTYPE" admin <<END
+$*
+END

root/usr/lib/systemd/system/nut-driver.service.d/51koozali.conf

@@ -0,0 +1,14 @@
+#------------------------------------------------------------
+#	       !!DO NOT MODIFY THIS FILE!!
+# 
+# Manual changes will be lost when this file is regenerated.
+#
+# Please read the developer's guide, which is available
+# at http://www.contribs.org/development/
+#
+# Copyright (C) 1999-2006 Mitel Networks Corporation
+#------------------------------------------------------------
+
+[Service]
+ExecStartPre=
+ExecStartPre=-/usr/bin/systemd-tmpfiles --create /usr/lib/tmpfiles.d/nut-run.conf

root/usr/lib/systemd/system/nut.service

@@ -0,0 +1,23 @@
+[Unit]
+Description=Network UPS Tools - Parent service for Koozali SME Server
+After=local-fs.target network.target  network-online.target
+Before=nut-server.service
+
+[Service]
+ExecStartPre=/sbin/e-smith/service-status nut
+ExecStartPre=-/sbin/e-smith/expand-template /etc/sysconfig/ups
+ExecStartPre=-/sbin/e-smith/expand-template /etc/ups/ups.conf
+ExecStartPre=-/sbin/e-smith/expand-template /etc/ups/upsd.conf
+ExecStartPre=-/sbin/e-smith/expand-template /etc/ups/upsd.users
+ExecStartPre=-/sbin/e-smith/expand-template /etc/ups/upsmon.conf
+ExecStartPre=-/sbin/e-smith/expand-template /etc/ups/upssched.conf
+
+# The dummy program will exit
+Type=oneshot
+# Execute a dummy program
+ExecStart=/bin/true
+# This service shall be considered active after start
+RemainAfterExit=yes
+
+[Install]
+WantedBy=multi-user.target sme-server.target